arch/arm/boot/dts/sun8i-a33.dtsi - kernel/msm-5.4 - Gitiles

 /*
  * Copyright 2014 Chen-Yu Tsai
  *
  * Chen-Yu Tsai <wens@csie.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include "sun8i-a23-a33.dtsi"
 #include <dt-bindings/thermal/thermal.h>

 / {
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 		opp-shared;

 		opp-120000000 {
 			opp-hz = /bits/ 64 <120000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-240000000 {
 			opp-hz = /bits/ 64 <240000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-312000000 {
 			opp-hz = /bits/ 64 <312000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-408000000 {
 			opp-hz = /bits/ 64 <408000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-504000000 {
 			opp-hz = /bits/ 64 <504000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-912000000 {
 			opp-hz = /bits/ 64 <912000000>;
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};

 		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 	};

 	cpus {
 		cpu@0 {
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>;
 		};

 		cpu@1 {
 			operating-points-v2 = <&cpu0_opp_table>;
 		};

 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};

 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};

 	de: display-engine {
 		compatible = "allwinner,sun8i-a33-display-engine";
 		allwinner,pipelines = <&fe0>;
 		status = "disabled";
 	};

 	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&ths>;
 	};

 	mali_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";

 		opp-144000000 {
 			opp-hz = /bits/ 64 <144000000>;
 		};

 		opp-240000000 {
 			opp-hz = /bits/ 64 <240000000>;
 		};

 		opp-384000000 {
 			opp-hz = /bits/ 64 <384000000>;
 		};
 	};

 	memory {
 		reg = <0x40000000 0x80000000>;
 	};

 	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sun8i-a33-audio";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&link_codec>;
 		simple-audio-card,bitclock-master = <&link_codec>;
 		simple-audio-card,mclk-fs = <512>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
 			"Left DAC", "AIF1 Slot 0 Left",
 			"Right DAC", "AIF1 Slot 0 Right";
 		status = "disabled";

 		simple-audio-card,cpu {
 			sound-dai = <&dai>;
 		};

 		link_codec: simple-audio-card,codec {
 			sound-dai = <&codec>;
 		};
 	};

 	soc@1c00000 {
 		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun8i-a33-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_LCD>,
 				 <&ccu CLK_LCD_CH0>;
 			clock-names = "ahb",
 				      "tcon-ch0";
 			clock-output-names = "tcon-pixel-clock";
 			resets = <&ccu RST_BUS_LCD>;
 			reset-names = "lcd";
 			status = "disabled";

 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				tcon0_in: port@0 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0>;

 					tcon0_in_drc0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&drc0_out_tcon0>;
 					};
 				};

 				tcon0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
 				};
 			};
 		};

 		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
 			resets = <&ccu RST_BUS_SS>;
 			reset-names = "ahb";
 		};

 		dai: dai@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun6i-a31-i2s";
 			reg = <0x01c22c00 0x200>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 			clock-names = "apb", "mod";
 			resets = <&ccu RST_BUS_CODEC>;
 			dmas = <&dma 15>, <&dma 15>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		codec: codec@1c22e00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-a33-codec";
 			reg = <0x01c22e00 0x400>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 			clock-names = "bus", "mod";
 			status = "disabled";
 		};

 		ths: ths@1c25000 {
 			compatible = "allwinner,sun8i-a33-ths";
 			reg = <0x01c25000 0x100>;
 			#thermal-sensor-cells = <0>;
 			#io-channel-cells = <0>;
 		};

 		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun8i-a33-display-frontend";
 			reg = <0x01e00000 0x20000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
 				 <&ccu CLK_DRAM_DE_FE>;
 			clock-names = "ahb", "mod",
 				      "ram";
 			resets = <&ccu RST_BUS_DE_FE>;
 			status = "disabled";

 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				fe0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;

 					fe0_out_be0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&be0_in_fe0>;
 					};
 				};
 			};
 		};

 		be0: display-backend@1e60000 {
 			compatible = "allwinner,sun8i-a33-display-backend";
 			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
 			reg-names = "be", "sat";
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
 				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
 			clock-names = "ahb", "mod",
 				      "ram", "sat";
 			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
 			reset-names = "be", "sat";
 			assigned-clocks = <&ccu CLK_DE_BE>;
 			assigned-clock-rates = <300000000>;

 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				be0_in: port@0 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0>;

 					be0_in_fe0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&fe0_out_be0>;
 					};
 				};

 				be0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;

 					be0_out_drc0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&drc0_in_be0>;
 					};
 				};
 			};
 		};

 		drc0: drc@1e70000 {
 			compatible = "allwinner,sun8i-a33-drc";
 			reg = <0x01e70000 0x10000>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
 				 <&ccu CLK_DRAM_DRC>;
 			clock-names = "ahb", "mod", "ram";
 			resets = <&ccu RST_BUS_DRC>;

 			assigned-clocks = <&ccu CLK_DRC>;
 			assigned-clock-rates = <300000000>;

 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				drc0_in: port@0 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0>;

 					drc0_in_be0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&be0_out_drc0>;
 					};
 				};

 				drc0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;

 					drc0_out_tcon0: endpoint@0 {
 						reg = <0>;
 						remote-endpoint = <&tcon0_in_drc0>;
 					};
 				};
 			};
 		};
 	};

 	thermal-zones {
 		cpu_thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&ths>;

 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu_alert1>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};

 				map2 {
 					trip = <&gpu_alert0>;
 					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
 				};

 				map3 {
 					trip = <&gpu_alert1>;
 					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
 				};
 			};

 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

 				gpu_alert0: gpu_alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

 				cpu_alert1: cpu_alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};

 				gpu_alert1: gpu_alert1 {
 					/* milliCelsius */
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};

 				cpu_crit: cpu_crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
 		};
 	};
 };

 &ccu {
 	compatible = "allwinner,sun8i-a33-ccu";
 };

 &mali {
 	operating-points-v2 = <&mali_opp_table>;
 };

 &pio {
 	compatible = "allwinner,sun8i-a33-pinctrl";
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;

 	uart0_pins_b: uart0@1 {
 		pins = "PB0", "PB1";
 		function = "uart0";
 	};

 };

 &usb_otg {
 	compatible = "allwinner,sun8i-a33-musb";
 };

 &usbphy {
 	compatible = "allwinner,sun8i-a33-usb-phy";
 	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
 	reg-names = "phy_ctrl", "pmu1";
 };
	/*
	* Copyright 2014 Chen-Yu Tsai
	*
	* Chen-Yu Tsai <wens@csie.org>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include "sun8i-a23-a33.dtsi"
	#include <dt-bindings/thermal/thermal.h>

	/ {
	cpu0_opp_table: opp_table0 {
	compatible = "operating-points-v2";
	opp-shared;

	opp-120000000 {
	opp-hz = /bits/ 64 <120000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-240000000 {
	opp-hz = /bits/ 64 <240000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-312000000 {
	opp-hz = /bits/ 64 <312000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-408000000 {
	opp-hz = /bits/ 64 <408000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-480000000 {
	opp-hz = /bits/ 64 <480000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-504000000 {
	opp-hz = /bits/ 64 <504000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-600000000 {
	opp-hz = /bits/ 64 <600000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-648000000 {
	opp-hz = /bits/ 64 <648000000>;
	opp-microvolt = <1040000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-720000000 {
	opp-hz = /bits/ 64 <720000000>;
	opp-microvolt = <1100000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-816000000 {
	opp-hz = /bits/ 64 <816000000>;
	opp-microvolt = <1100000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-912000000 {
	opp-hz = /bits/ 64 <912000000>;
	opp-microvolt = <1200000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};

	opp-1008000000 {
	opp-hz = /bits/ 64 <1008000000>;
	opp-microvolt = <1200000>;
	clock-latency-ns = <244144>; /* 8 32k periods */
	};
	};

	cpus {
	cpu@0 {
	clocks = <&ccu CLK_CPUX>;
	clock-names = "cpu";
	operating-points-v2 = <&cpu0_opp_table>;
	#cooling-cells = <2>;
	};

	cpu@1 {
	operating-points-v2 = <&cpu0_opp_table>;
	};

	cpu@2 {
	compatible = "arm,cortex-a7";
	device_type = "cpu";
	reg = <2>;
	operating-points-v2 = <&cpu0_opp_table>;
	};

	cpu@3 {
	compatible = "arm,cortex-a7";
	device_type = "cpu";
	reg = <3>;
	operating-points-v2 = <&cpu0_opp_table>;
	};
	};

	de: display-engine {
	compatible = "allwinner,sun8i-a33-display-engine";
	allwinner,pipelines = <&fe0>;
	status = "disabled";
	};

	iio-hwmon {
	compatible = "iio-hwmon";
	io-channels = <&ths>;
	};

	mali_opp_table: gpu-opp-table {
	compatible = "operating-points-v2";

	opp-144000000 {
	opp-hz = /bits/ 64 <144000000>;
	};

	opp-240000000 {
	opp-hz = /bits/ 64 <240000000>;
	};

	opp-384000000 {
	opp-hz = /bits/ 64 <384000000>;
	};
	};

	memory {
	reg = <0x40000000 0x80000000>;
	};

	sound: sound {
	compatible = "simple-audio-card";
	simple-audio-card,name = "sun8i-a33-audio";
	simple-audio-card,format = "i2s";
	simple-audio-card,frame-master = <&link_codec>;
	simple-audio-card,bitclock-master = <&link_codec>;
	simple-audio-card,mclk-fs = <512>;
	simple-audio-card,aux-devs = <&codec_analog>;
	simple-audio-card,routing =
	"Left DAC", "AIF1 Slot 0 Left",
	"Right DAC", "AIF1 Slot 0 Right";
	status = "disabled";

	simple-audio-card,cpu {
	sound-dai = <&dai>;
	};

	link_codec: simple-audio-card,codec {
	sound-dai = <&codec>;
	};
	};

	soc@1c00000 {
	tcon0: lcd-controller@1c0c000 {
	compatible = "allwinner,sun8i-a33-tcon";
	reg = <0x01c0c000 0x1000>;
	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_LCD>,
	<&ccu CLK_LCD_CH0>;
	clock-names = "ahb",
	"tcon-ch0";
	clock-output-names = "tcon-pixel-clock";
	resets = <&ccu RST_BUS_LCD>;
	reset-names = "lcd";
	status = "disabled";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	tcon0_in: port@0 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0>;

	tcon0_in_drc0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&drc0_out_tcon0>;
	};
	};

	tcon0_out: port@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <1>;
	};
	};
	};

	crypto: crypto-engine@1c15000 {
	compatible = "allwinner,sun4i-a10-crypto";
	reg = <0x01c15000 0x1000>;
	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
	clock-names = "ahb", "mod";
	resets = <&ccu RST_BUS_SS>;
	reset-names = "ahb";
	};

	dai: dai@1c22c00 {
	#sound-dai-cells = <0>;
	compatible = "allwinner,sun6i-a31-i2s";
	reg = <0x01c22c00 0x200>;
	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
	clock-names = "apb", "mod";
	resets = <&ccu RST_BUS_CODEC>;
	dmas = <&dma 15>, <&dma 15>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	codec: codec@1c22e00 {
	#sound-dai-cells = <0>;
	compatible = "allwinner,sun8i-a33-codec";
	reg = <0x01c22e00 0x400>;
	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
	clock-names = "bus", "mod";
	status = "disabled";
	};

	ths: ths@1c25000 {
	compatible = "allwinner,sun8i-a33-ths";
	reg = <0x01c25000 0x100>;
	#thermal-sensor-cells = <0>;
	#io-channel-cells = <0>;
	};

	fe0: display-frontend@1e00000 {
	compatible = "allwinner,sun8i-a33-display-frontend";
	reg = <0x01e00000 0x20000>;
	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
	<&ccu CLK_DRAM_DE_FE>;
	clock-names = "ahb", "mod",
	"ram";
	resets = <&ccu RST_BUS_DE_FE>;
	status = "disabled";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	fe0_out: port@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <1>;

	fe0_out_be0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&be0_in_fe0>;
	};
	};
	};
	};

	be0: display-backend@1e60000 {
	compatible = "allwinner,sun8i-a33-display-backend";
	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
	reg-names = "be", "sat";
	interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
	<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
	clock-names = "ahb", "mod",
	"ram", "sat";
	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
	reset-names = "be", "sat";
	assigned-clocks = <&ccu CLK_DE_BE>;
	assigned-clock-rates = <300000000>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	be0_in: port@0 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0>;

	be0_in_fe0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&fe0_out_be0>;
	};
	};

	be0_out: port@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <1>;

	be0_out_drc0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&drc0_in_be0>;
	};
	};
	};
	};

	drc0: drc@1e70000 {
	compatible = "allwinner,sun8i-a33-drc";
	reg = <0x01e70000 0x10000>;
	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
	<&ccu CLK_DRAM_DRC>;
	clock-names = "ahb", "mod", "ram";
	resets = <&ccu RST_BUS_DRC>;

	assigned-clocks = <&ccu CLK_DRC>;
	assigned-clock-rates = <300000000>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	drc0_in: port@0 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0>;

	drc0_in_be0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&be0_out_drc0>;
	};
	};

	drc0_out: port@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <1>;

	drc0_out_tcon0: endpoint@0 {
	reg = <0>;
	remote-endpoint = <&tcon0_in_drc0>;
	};
	};
	};
	};
	};

	thermal-zones {
	cpu_thermal {
	/* milliseconds */
	polling-delay-passive = <250>;
	polling-delay = <1000>;
	thermal-sensors = <&ths>;

	cooling-maps {
	map0 {
	trip = <&cpu_alert0>;
	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	};
	map1 {
	trip = <&cpu_alert1>;
	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	};

	map2 {
	trip = <&gpu_alert0>;
	cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
	};

	map3 {
	trip = <&gpu_alert1>;
	cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
	};
	};

	trips {
	cpu_alert0: cpu_alert0 {
	/* milliCelsius */
	temperature = <75000>;
	hysteresis = <2000>;
	type = "passive";
	};

	gpu_alert0: gpu_alert0 {
	/* milliCelsius */
	temperature = <85000>;
	hysteresis = <2000>;
	type = "passive";
	};

	cpu_alert1: cpu_alert1 {
	/* milliCelsius */
	temperature = <90000>;
	hysteresis = <2000>;
	type = "hot";
	};

	gpu_alert1: gpu_alert1 {
	/* milliCelsius */
	temperature = <95000>;
	hysteresis = <2000>;
	type = "hot";
	};

	cpu_crit: cpu_crit {
	/* milliCelsius */
	temperature = <110000>;
	hysteresis = <2000>;
	type = "critical";
	};
	};
	};
	};
	};

	&ccu {
	compatible = "allwinner,sun8i-a33-ccu";
	};

	&mali {
	operating-points-v2 = <&mali_opp_table>;
	};

	&pio {
	compatible = "allwinner,sun8i-a33-pinctrl";
	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;

	uart0_pins_b: uart0@1 {
	pins = "PB0", "PB1";
	function = "uart0";
	};

	};

	&usb_otg {
	compatible = "allwinner,sun8i-a33-musb";
	};

	&usbphy {
	compatible = "allwinner,sun8i-a33-usb-phy";
	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
	reg-names = "phy_ctrl", "pmu1";
	};