| /* SPDX-License-Identifier: GPL-2.0 |
| * |
| * IO cost model based controller. |
| * |
| * Copyright (C) 2019 Tejun Heo <tj@kernel.org> |
| * Copyright (C) 2019 Andy Newell <newella@fb.com> |
| * Copyright (C) 2019 Facebook |
| * |
| * One challenge of controlling IO resources is the lack of trivially |
| * observable cost metric. This is distinguished from CPU and memory where |
| * wallclock time and the number of bytes can serve as accurate enough |
| * approximations. |
| * |
| * Bandwidth and iops are the most commonly used metrics for IO devices but |
| * depending on the type and specifics of the device, different IO patterns |
| * easily lead to multiple orders of magnitude variations rendering them |
| * useless for the purpose of IO capacity distribution. While on-device |
| * time, with a lot of clutches, could serve as a useful approximation for |
| * non-queued rotational devices, this is no longer viable with modern |
| * devices, even the rotational ones. |
| * |
| * While there is no cost metric we can trivially observe, it isn't a |
| * complete mystery. For example, on a rotational device, seek cost |
| * dominates while a contiguous transfer contributes a smaller amount |
| * proportional to the size. If we can characterize at least the relative |
| * costs of these different types of IOs, it should be possible to |
| * implement a reasonable work-conserving proportional IO resource |
| * distribution. |
| * |
| * 1. IO Cost Model |
| * |
| * IO cost model estimates the cost of an IO given its basic parameters and |
| * history (e.g. the end sector of the last IO). The cost is measured in |
| * device time. If a given IO is estimated to cost 10ms, the device should |
| * be able to process ~100 of those IOs in a second. |
| * |
| * Currently, there's only one builtin cost model - linear. Each IO is |
| * classified as sequential or random and given a base cost accordingly. |
| * On top of that, a size cost proportional to the length of the IO is |
| * added. While simple, this model captures the operational |
| * characteristics of a wide varienty of devices well enough. Default |
| * paramters for several different classes of devices are provided and the |
| * parameters can be configured from userspace via |
| * /sys/fs/cgroup/io.cost.model. |
| * |
| * If needed, tools/cgroup/iocost_coef_gen.py can be used to generate |
| * device-specific coefficients. |
| * |
| * If needed, tools/cgroup/iocost_coef_gen.py can be used to generate |
| * device-specific coefficients. |
| * |
| * 2. Control Strategy |
| * |
| * The device virtual time (vtime) is used as the primary control metric. |
| * The control strategy is composed of the following three parts. |
| * |
| * 2-1. Vtime Distribution |
| * |
| * When a cgroup becomes active in terms of IOs, its hierarchical share is |
| * calculated. Please consider the following hierarchy where the numbers |
| * inside parentheses denote the configured weights. |
| * |
| * root |
| * / \ |
| * A (w:100) B (w:300) |
| * / \ |
| * A0 (w:100) A1 (w:100) |
| * |
| * If B is idle and only A0 and A1 are actively issuing IOs, as the two are |
| * of equal weight, each gets 50% share. If then B starts issuing IOs, B |
| * gets 300/(100+300) or 75% share, and A0 and A1 equally splits the rest, |
| * 12.5% each. The distribution mechanism only cares about these flattened |
| * shares. They're called hweights (hierarchical weights) and always add |
| * upto 1 (HWEIGHT_WHOLE). |
| * |
| * A given cgroup's vtime runs slower in inverse proportion to its hweight. |
| * For example, with 12.5% weight, A0's time runs 8 times slower (100/12.5) |
| * against the device vtime - an IO which takes 10ms on the underlying |
| * device is considered to take 80ms on A0. |
| * |
| * This constitutes the basis of IO capacity distribution. Each cgroup's |
| * vtime is running at a rate determined by its hweight. A cgroup tracks |
| * the vtime consumed by past IOs and can issue a new IO iff doing so |
| * wouldn't outrun the current device vtime. Otherwise, the IO is |
| * suspended until the vtime has progressed enough to cover it. |
| * |
| * 2-2. Vrate Adjustment |
| * |
| * It's unrealistic to expect the cost model to be perfect. There are too |
| * many devices and even on the same device the overall performance |
| * fluctuates depending on numerous factors such as IO mixture and device |
| * internal garbage collection. The controller needs to adapt dynamically. |
| * |
| * This is achieved by adjusting the overall IO rate according to how busy |
| * the device is. If the device becomes overloaded, we're sending down too |
| * many IOs and should generally slow down. If there are waiting issuers |
| * but the device isn't saturated, we're issuing too few and should |
| * generally speed up. |
| * |
| * To slow down, we lower the vrate - the rate at which the device vtime |
| * passes compared to the wall clock. For example, if the vtime is running |
| * at the vrate of 75%, all cgroups added up would only be able to issue |
| * 750ms worth of IOs per second, and vice-versa for speeding up. |
| * |
| * Device business is determined using two criteria - rq wait and |
| * completion latencies. |
| * |
| * When a device gets saturated, the on-device and then the request queues |
| * fill up and a bio which is ready to be issued has to wait for a request |
| * to become available. When this delay becomes noticeable, it's a clear |
| * indication that the device is saturated and we lower the vrate. This |
| * saturation signal is fairly conservative as it only triggers when both |
| * hardware and software queues are filled up, and is used as the default |
| * busy signal. |
| * |
| * As devices can have deep queues and be unfair in how the queued commands |
| * are executed, soley depending on rq wait may not result in satisfactory |
| * control quality. For a better control quality, completion latency QoS |
| * parameters can be configured so that the device is considered saturated |
| * if N'th percentile completion latency rises above the set point. |
| * |
| * The completion latency requirements are a function of both the |
| * underlying device characteristics and the desired IO latency quality of |
| * service. There is an inherent trade-off - the tighter the latency QoS, |
| * the higher the bandwidth lossage. Latency QoS is disabled by default |
| * and can be set through /sys/fs/cgroup/io.cost.qos. |
| * |
| * 2-3. Work Conservation |
| * |
| * Imagine two cgroups A and B with equal weights. A is issuing a small IO |
| * periodically while B is sending out enough parallel IOs to saturate the |
| * device on its own. Let's say A's usage amounts to 100ms worth of IO |
| * cost per second, i.e., 10% of the device capacity. The naive |
| * distribution of half and half would lead to 60% utilization of the |
| * device, a significant reduction in the total amount of work done |
| * compared to free-for-all competition. This is too high a cost to pay |
| * for IO control. |
| * |
| * To conserve the total amount of work done, we keep track of how much |
| * each active cgroup is actually using and yield part of its weight if |
| * there are other cgroups which can make use of it. In the above case, |
| * A's weight will be lowered so that it hovers above the actual usage and |
| * B would be able to use the rest. |
| * |
| * As we don't want to penalize a cgroup for donating its weight, the |
| * surplus weight adjustment factors in a margin and has an immediate |
| * snapback mechanism in case the cgroup needs more IO vtime for itself. |
| * |
| * Note that adjusting down surplus weights has the same effects as |
| * accelerating vtime for other cgroups and work conservation can also be |
| * implemented by adjusting vrate dynamically. However, squaring who can |
| * donate and should take back how much requires hweight propagations |
| * anyway making it easier to implement and understand as a separate |
| * mechanism. |
| * |
| * 3. Monitoring |
| * |
| * Instead of debugfs or other clumsy monitoring mechanisms, this |
| * controller uses a drgn based monitoring script - |
| * tools/cgroup/iocost_monitor.py. For details on drgn, please see |
| * https://github.com/osandov/drgn. The ouput looks like the following. |
| * |
| * sdb RUN per=300ms cur_per=234.218:v203.695 busy= +1 vrate= 62.12% |
| * active weight hweight% inflt% dbt delay usages% |
| * test/a * 50/ 50 33.33/ 33.33 27.65 2 0*041 033:033:033 |
| * test/b * 100/ 100 66.67/ 66.67 17.56 0 0*000 066:079:077 |
| * |
| * - per : Timer period |
| * - cur_per : Internal wall and device vtime clock |
| * - vrate : Device virtual time rate against wall clock |
| * - weight : Surplus-adjusted and configured weights |
| * - hweight : Surplus-adjusted and configured hierarchical weights |
| * - inflt : The percentage of in-flight IO cost at the end of last period |
| * - del_ms : Deferred issuer delay induction level and duration |
| * - usages : Usage history |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/timer.h> |
| #include <linux/time64.h> |
| #include <linux/parser.h> |
| #include <linux/sched/signal.h> |
| #include <linux/blk-cgroup.h> |
| #include "blk-rq-qos.h" |
| #include "blk-stat.h" |
| #include "blk-wbt.h" |
| |
| #ifdef CONFIG_TRACEPOINTS |
| |
| /* copied from TRACE_CGROUP_PATH, see cgroup-internal.h */ |
| #define TRACE_IOCG_PATH_LEN 1024 |
| static DEFINE_SPINLOCK(trace_iocg_path_lock); |
| static char trace_iocg_path[TRACE_IOCG_PATH_LEN]; |
| |
| #define TRACE_IOCG_PATH(type, iocg, ...) \ |
| do { \ |
| unsigned long flags; \ |
| if (trace_iocost_##type##_enabled()) { \ |
| spin_lock_irqsave(&trace_iocg_path_lock, flags); \ |
| cgroup_path(iocg_to_blkg(iocg)->blkcg->css.cgroup, \ |
| trace_iocg_path, TRACE_IOCG_PATH_LEN); \ |
| trace_iocost_##type(iocg, trace_iocg_path, \ |
| ##__VA_ARGS__); \ |
| spin_unlock_irqrestore(&trace_iocg_path_lock, flags); \ |
| } \ |
| } while (0) |
| |
| #else /* CONFIG_TRACE_POINTS */ |
| #define TRACE_IOCG_PATH(type, iocg, ...) do { } while (0) |
| #endif /* CONFIG_TRACE_POINTS */ |
| |
| enum { |
| MILLION = 1000000, |
| |
| /* timer period is calculated from latency requirements, bound it */ |
| MIN_PERIOD = USEC_PER_MSEC, |
| MAX_PERIOD = USEC_PER_SEC, |
| |
| /* |
| * A cgroup's vtime can run 50% behind the device vtime, which |
| * serves as its IO credit buffer. Surplus weight adjustment is |
| * immediately canceled if the vtime margin runs below 10%. |
| */ |
| MARGIN_PCT = 50, |
| INUSE_MARGIN_PCT = 10, |
| |
| /* Have some play in waitq timer operations */ |
| WAITQ_TIMER_MARGIN_PCT = 5, |
| |
| /* |
| * vtime can wrap well within a reasonable uptime when vrate is |
| * consistently raised. Don't trust recorded cgroup vtime if the |
| * period counter indicates that it's older than 5mins. |
| */ |
| VTIME_VALID_DUR = 300 * USEC_PER_SEC, |
| |
| /* |
| * Remember the past three non-zero usages and use the max for |
| * surplus calculation. Three slots guarantee that we remember one |
| * full period usage from the last active stretch even after |
| * partial deactivation and re-activation periods. Don't start |
| * giving away weight before collecting two data points to prevent |
| * hweight adjustments based on one partial activation period. |
| */ |
| NR_USAGE_SLOTS = 3, |
| MIN_VALID_USAGES = 2, |
| |
| /* 1/64k is granular enough and can easily be handled w/ u32 */ |
| HWEIGHT_WHOLE = 1 << 16, |
| |
| /* |
| * As vtime is used to calculate the cost of each IO, it needs to |
| * be fairly high precision. For example, it should be able to |
| * represent the cost of a single page worth of discard with |
| * suffificient accuracy. At the same time, it should be able to |
| * represent reasonably long enough durations to be useful and |
| * convenient during operation. |
| * |
| * 1s worth of vtime is 2^37. This gives us both sub-nanosecond |
| * granularity and days of wrap-around time even at extreme vrates. |
| */ |
| VTIME_PER_SEC_SHIFT = 37, |
| VTIME_PER_SEC = 1LLU << VTIME_PER_SEC_SHIFT, |
| VTIME_PER_USEC = VTIME_PER_SEC / USEC_PER_SEC, |
| |
| /* bound vrate adjustments within two orders of magnitude */ |
| VRATE_MIN_PPM = 10000, /* 1% */ |
| VRATE_MAX_PPM = 100000000, /* 10000% */ |
| |
| VRATE_MIN = VTIME_PER_USEC * VRATE_MIN_PPM / MILLION, |
| VRATE_CLAMP_ADJ_PCT = 4, |
| |
| /* if IOs end up waiting for requests, issue less */ |
| RQ_WAIT_BUSY_PCT = 5, |
| |
| /* unbusy hysterisis */ |
| UNBUSY_THR_PCT = 75, |
| |
| /* don't let cmds which take a very long time pin lagging for too long */ |
| MAX_LAGGING_PERIODS = 10, |
| |
| /* |
| * If usage% * 1.25 + 2% is lower than hweight% by more than 3%, |
| * donate the surplus. |
| */ |
| SURPLUS_SCALE_PCT = 125, /* * 125% */ |
| SURPLUS_SCALE_ABS = HWEIGHT_WHOLE / 50, /* + 2% */ |
| SURPLUS_MIN_ADJ_DELTA = HWEIGHT_WHOLE / 33, /* 3% */ |
| |
| /* switch iff the conditions are met for longer than this */ |
| AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC, |
| |
| /* |
| * Count IO size in 4k pages. The 12bit shift helps keeping |
| * size-proportional components of cost calculation in closer |
| * numbers of digits to per-IO cost components. |
| */ |
| IOC_PAGE_SHIFT = 12, |
| IOC_PAGE_SIZE = 1 << IOC_PAGE_SHIFT, |
| IOC_SECT_TO_PAGE_SHIFT = IOC_PAGE_SHIFT - SECTOR_SHIFT, |
| |
| /* if apart further than 16M, consider randio for linear model */ |
| LCOEF_RANDIO_PAGES = 4096, |
| }; |
| |
| enum ioc_running { |
| IOC_IDLE, |
| IOC_RUNNING, |
| IOC_STOP, |
| }; |
| |
| /* io.cost.qos controls including per-dev enable of the whole controller */ |
| enum { |
| QOS_ENABLE, |
| QOS_CTRL, |
| NR_QOS_CTRL_PARAMS, |
| }; |
| |
| /* io.cost.qos params */ |
| enum { |
| QOS_RPPM, |
| QOS_RLAT, |
| QOS_WPPM, |
| QOS_WLAT, |
| QOS_MIN, |
| QOS_MAX, |
| NR_QOS_PARAMS, |
| }; |
| |
| /* io.cost.model controls */ |
| enum { |
| COST_CTRL, |
| COST_MODEL, |
| NR_COST_CTRL_PARAMS, |
| }; |
| |
| /* builtin linear cost model coefficients */ |
| enum { |
| I_LCOEF_RBPS, |
| I_LCOEF_RSEQIOPS, |
| I_LCOEF_RRANDIOPS, |
| I_LCOEF_WBPS, |
| I_LCOEF_WSEQIOPS, |
| I_LCOEF_WRANDIOPS, |
| NR_I_LCOEFS, |
| }; |
| |
| enum { |
| LCOEF_RPAGE, |
| LCOEF_RSEQIO, |
| LCOEF_RRANDIO, |
| LCOEF_WPAGE, |
| LCOEF_WSEQIO, |
| LCOEF_WRANDIO, |
| NR_LCOEFS, |
| }; |
| |
| enum { |
| AUTOP_INVALID, |
| AUTOP_HDD, |
| AUTOP_SSD_QD1, |
| AUTOP_SSD_DFL, |
| AUTOP_SSD_FAST, |
| }; |
| |
| struct ioc_gq; |
| |
| struct ioc_params { |
| u32 qos[NR_QOS_PARAMS]; |
| u64 i_lcoefs[NR_I_LCOEFS]; |
| u64 lcoefs[NR_LCOEFS]; |
| u32 too_fast_vrate_pct; |
| u32 too_slow_vrate_pct; |
| }; |
| |
| struct ioc_missed { |
| u32 nr_met; |
| u32 nr_missed; |
| u32 last_met; |
| u32 last_missed; |
| }; |
| |
| struct ioc_pcpu_stat { |
| struct ioc_missed missed[2]; |
| |
| u64 rq_wait_ns; |
| u64 last_rq_wait_ns; |
| }; |
| |
| /* per device */ |
| struct ioc { |
| struct rq_qos rqos; |
| |
| bool enabled; |
| |
| struct ioc_params params; |
| u32 period_us; |
| u32 margin_us; |
| u64 vrate_min; |
| u64 vrate_max; |
| |
| spinlock_t lock; |
| struct timer_list timer; |
| struct list_head active_iocgs; /* active cgroups */ |
| struct ioc_pcpu_stat __percpu *pcpu_stat; |
| |
| enum ioc_running running; |
| atomic64_t vtime_rate; |
| |
| seqcount_t period_seqcount; |
| u32 period_at; /* wallclock starttime */ |
| u64 period_at_vtime; /* vtime starttime */ |
| |
| atomic64_t cur_period; /* inc'd each period */ |
| int busy_level; /* saturation history */ |
| |
| u64 inuse_margin_vtime; |
| bool weights_updated; |
| atomic_t hweight_gen; /* for lazy hweights */ |
| |
| u64 autop_too_fast_at; |
| u64 autop_too_slow_at; |
| int autop_idx; |
| bool user_qos_params:1; |
| bool user_cost_model:1; |
| }; |
| |
| /* per device-cgroup pair */ |
| struct ioc_gq { |
| struct blkg_policy_data pd; |
| struct ioc *ioc; |
| |
| /* |
| * A iocg can get its weight from two sources - an explicit |
| * per-device-cgroup configuration or the default weight of the |
| * cgroup. `cfg_weight` is the explicit per-device-cgroup |
| * configuration. `weight` is the effective considering both |
| * sources. |
| * |
| * When an idle cgroup becomes active its `active` goes from 0 to |
| * `weight`. `inuse` is the surplus adjusted active weight. |
| * `active` and `inuse` are used to calculate `hweight_active` and |
| * `hweight_inuse`. |
| * |
| * `last_inuse` remembers `inuse` while an iocg is idle to persist |
| * surplus adjustments. |
| */ |
| u32 cfg_weight; |
| u32 weight; |
| u32 active; |
| u32 inuse; |
| u32 last_inuse; |
| |
| sector_t cursor; /* to detect randio */ |
| |
| /* |
| * `vtime` is this iocg's vtime cursor which progresses as IOs are |
| * issued. If lagging behind device vtime, the delta represents |
| * the currently available IO budget. If runnning ahead, the |
| * overage. |
| * |
| * `vtime_done` is the same but progressed on completion rather |
| * than issue. The delta behind `vtime` represents the cost of |
| * currently in-flight IOs. |
| * |
| * `last_vtime` is used to remember `vtime` at the end of the last |
| * period to calculate utilization. |
| */ |
| atomic64_t vtime; |
| atomic64_t done_vtime; |
| atomic64_t abs_vdebt; |
| u64 last_vtime; |
| |
| /* |
| * The period this iocg was last active in. Used for deactivation |
| * and invalidating `vtime`. |
| */ |
| atomic64_t active_period; |
| struct list_head active_list; |
| |
| /* see __propagate_active_weight() and current_hweight() for details */ |
| u64 child_active_sum; |
| u64 child_inuse_sum; |
| int hweight_gen; |
| u32 hweight_active; |
| u32 hweight_inuse; |
| bool has_surplus; |
| |
| struct wait_queue_head waitq; |
| struct hrtimer waitq_timer; |
| struct hrtimer delay_timer; |
| |
| /* usage is recorded as fractions of HWEIGHT_WHOLE */ |
| int usage_idx; |
| u32 usages[NR_USAGE_SLOTS]; |
| |
| /* this iocg's depth in the hierarchy and ancestors including self */ |
| int level; |
| struct ioc_gq *ancestors[]; |
| }; |
| |
| /* per cgroup */ |
| struct ioc_cgrp { |
| struct blkcg_policy_data cpd; |
| unsigned int dfl_weight; |
| }; |
| |
| struct ioc_now { |
| u64 now_ns; |
| u32 now; |
| u64 vnow; |
| u64 vrate; |
| }; |
| |
| struct iocg_wait { |
| struct wait_queue_entry wait; |
| struct bio *bio; |
| u64 abs_cost; |
| bool committed; |
| }; |
| |
| struct iocg_wake_ctx { |
| struct ioc_gq *iocg; |
| u32 hw_inuse; |
| s64 vbudget; |
| }; |
| |
| static const struct ioc_params autop[] = { |
| [AUTOP_HDD] = { |
| .qos = { |
| [QOS_RLAT] = 50000, /* 50ms */ |
| [QOS_WLAT] = 50000, |
| [QOS_MIN] = VRATE_MIN_PPM, |
| [QOS_MAX] = VRATE_MAX_PPM, |
| }, |
| .i_lcoefs = { |
| [I_LCOEF_RBPS] = 174019176, |
| [I_LCOEF_RSEQIOPS] = 41708, |
| [I_LCOEF_RRANDIOPS] = 370, |
| [I_LCOEF_WBPS] = 178075866, |
| [I_LCOEF_WSEQIOPS] = 42705, |
| [I_LCOEF_WRANDIOPS] = 378, |
| }, |
| }, |
| [AUTOP_SSD_QD1] = { |
| .qos = { |
| [QOS_RLAT] = 25000, /* 25ms */ |
| [QOS_WLAT] = 25000, |
| [QOS_MIN] = VRATE_MIN_PPM, |
| [QOS_MAX] = VRATE_MAX_PPM, |
| }, |
| .i_lcoefs = { |
| [I_LCOEF_RBPS] = 245855193, |
| [I_LCOEF_RSEQIOPS] = 61575, |
| [I_LCOEF_RRANDIOPS] = 6946, |
| [I_LCOEF_WBPS] = 141365009, |
| [I_LCOEF_WSEQIOPS] = 33716, |
| [I_LCOEF_WRANDIOPS] = 26796, |
| }, |
| }, |
| [AUTOP_SSD_DFL] = { |
| .qos = { |
| [QOS_RLAT] = 25000, /* 25ms */ |
| [QOS_WLAT] = 25000, |
| [QOS_MIN] = VRATE_MIN_PPM, |
| [QOS_MAX] = VRATE_MAX_PPM, |
| }, |
| .i_lcoefs = { |
| [I_LCOEF_RBPS] = 488636629, |
| [I_LCOEF_RSEQIOPS] = 8932, |
| [I_LCOEF_RRANDIOPS] = 8518, |
| [I_LCOEF_WBPS] = 427891549, |
| [I_LCOEF_WSEQIOPS] = 28755, |
| [I_LCOEF_WRANDIOPS] = 21940, |
| }, |
| .too_fast_vrate_pct = 500, |
| }, |
| [AUTOP_SSD_FAST] = { |
| .qos = { |
| [QOS_RLAT] = 5000, /* 5ms */ |
| [QOS_WLAT] = 5000, |
| [QOS_MIN] = VRATE_MIN_PPM, |
| [QOS_MAX] = VRATE_MAX_PPM, |
| }, |
| .i_lcoefs = { |
| [I_LCOEF_RBPS] = 3102524156LLU, |
| [I_LCOEF_RSEQIOPS] = 724816, |
| [I_LCOEF_RRANDIOPS] = 778122, |
| [I_LCOEF_WBPS] = 1742780862LLU, |
| [I_LCOEF_WSEQIOPS] = 425702, |
| [I_LCOEF_WRANDIOPS] = 443193, |
| }, |
| .too_slow_vrate_pct = 10, |
| }, |
| }; |
| |
| /* |
| * vrate adjust percentages indexed by ioc->busy_level. We adjust up on |
| * vtime credit shortage and down on device saturation. |
| */ |
| static u32 vrate_adj_pct[] = |
| { 0, 0, 0, 0, |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, |
| 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, |
| 4, 4, 4, 4, 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8, 16 }; |
| |
| static struct blkcg_policy blkcg_policy_iocost; |
| |
| /* accessors and helpers */ |
| static struct ioc *rqos_to_ioc(struct rq_qos *rqos) |
| { |
| return container_of(rqos, struct ioc, rqos); |
| } |
| |
| static struct ioc *q_to_ioc(struct request_queue *q) |
| { |
| return rqos_to_ioc(rq_qos_id(q, RQ_QOS_COST)); |
| } |
| |
| static const char *q_name(struct request_queue *q) |
| { |
| if (test_bit(QUEUE_FLAG_REGISTERED, &q->queue_flags)) |
| return kobject_name(q->kobj.parent); |
| else |
| return "<unknown>"; |
| } |
| |
| static const char __maybe_unused *ioc_name(struct ioc *ioc) |
| { |
| return q_name(ioc->rqos.q); |
| } |
| |
| static struct ioc_gq *pd_to_iocg(struct blkg_policy_data *pd) |
| { |
| return pd ? container_of(pd, struct ioc_gq, pd) : NULL; |
| } |
| |
| static struct ioc_gq *blkg_to_iocg(struct blkcg_gq *blkg) |
| { |
| return pd_to_iocg(blkg_to_pd(blkg, &blkcg_policy_iocost)); |
| } |
| |
| static struct blkcg_gq *iocg_to_blkg(struct ioc_gq *iocg) |
| { |
| return pd_to_blkg(&iocg->pd); |
| } |
| |
| static struct ioc_cgrp *blkcg_to_iocc(struct blkcg *blkcg) |
| { |
| return container_of(blkcg_to_cpd(blkcg, &blkcg_policy_iocost), |
| struct ioc_cgrp, cpd); |
| } |
| |
| /* |
| * Scale @abs_cost to the inverse of @hw_inuse. The lower the hierarchical |
| * weight, the more expensive each IO. Must round up. |
| */ |
| static u64 abs_cost_to_cost(u64 abs_cost, u32 hw_inuse) |
| { |
| return DIV64_U64_ROUND_UP(abs_cost * HWEIGHT_WHOLE, hw_inuse); |
| } |
| |
| /* |
| * The inverse of abs_cost_to_cost(). Must round up. |
| */ |
| static u64 cost_to_abs_cost(u64 cost, u32 hw_inuse) |
| { |
| return DIV64_U64_ROUND_UP(cost * hw_inuse, HWEIGHT_WHOLE); |
| } |
| |
| static void iocg_commit_bio(struct ioc_gq *iocg, struct bio *bio, u64 cost) |
| { |
| bio->bi_iocost_cost = cost; |
| atomic64_add(cost, &iocg->vtime); |
| } |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/iocost.h> |
| |
| /* latency Qos params changed, update period_us and all the dependent params */ |
| static void ioc_refresh_period_us(struct ioc *ioc) |
| { |
| u32 ppm, lat, multi, period_us; |
| |
| lockdep_assert_held(&ioc->lock); |
| |
| /* pick the higher latency target */ |
| if (ioc->params.qos[QOS_RLAT] >= ioc->params.qos[QOS_WLAT]) { |
| ppm = ioc->params.qos[QOS_RPPM]; |
| lat = ioc->params.qos[QOS_RLAT]; |
| } else { |
| ppm = ioc->params.qos[QOS_WPPM]; |
| lat = ioc->params.qos[QOS_WLAT]; |
| } |
| |
| /* |
| * We want the period to be long enough to contain a healthy number |
| * of IOs while short enough for granular control. Define it as a |
| * multiple of the latency target. Ideally, the multiplier should |
| * be scaled according to the percentile so that it would nominally |
| * contain a certain number of requests. Let's be simpler and |
| * scale it linearly so that it's 2x >= pct(90) and 10x at pct(50). |
| */ |
| if (ppm) |
| multi = max_t(u32, (MILLION - ppm) / 50000, 2); |
| else |
| multi = 2; |
| period_us = multi * lat; |
| period_us = clamp_t(u32, period_us, MIN_PERIOD, MAX_PERIOD); |
| |
| /* calculate dependent params */ |
| ioc->period_us = period_us; |
| ioc->margin_us = period_us * MARGIN_PCT / 100; |
| ioc->inuse_margin_vtime = DIV64_U64_ROUND_UP( |
| period_us * VTIME_PER_USEC * INUSE_MARGIN_PCT, 100); |
| } |
| |
| static int ioc_autop_idx(struct ioc *ioc) |
| { |
| int idx = ioc->autop_idx; |
| const struct ioc_params *p = &autop[idx]; |
| u32 vrate_pct; |
| u64 now_ns; |
| |
| /* rotational? */ |
| if (!blk_queue_nonrot(ioc->rqos.q)) |
| return AUTOP_HDD; |
| |
| /* handle SATA SSDs w/ broken NCQ */ |
| if (blk_queue_depth(ioc->rqos.q) == 1) |
| return AUTOP_SSD_QD1; |
| |
| /* use one of the normal ssd sets */ |
| if (idx < AUTOP_SSD_DFL) |
| return AUTOP_SSD_DFL; |
| |
| /* if user is overriding anything, maintain what was there */ |
| if (ioc->user_qos_params || ioc->user_cost_model) |
| return idx; |
| |
| /* step up/down based on the vrate */ |
| vrate_pct = div64_u64(atomic64_read(&ioc->vtime_rate) * 100, |
| VTIME_PER_USEC); |
| now_ns = ktime_get_ns(); |
| |
| if (p->too_fast_vrate_pct && p->too_fast_vrate_pct <= vrate_pct) { |
| if (!ioc->autop_too_fast_at) |
| ioc->autop_too_fast_at = now_ns; |
| if (now_ns - ioc->autop_too_fast_at >= AUTOP_CYCLE_NSEC) |
| return idx + 1; |
| } else { |
| ioc->autop_too_fast_at = 0; |
| } |
| |
| if (p->too_slow_vrate_pct && p->too_slow_vrate_pct >= vrate_pct) { |
| if (!ioc->autop_too_slow_at) |
| ioc->autop_too_slow_at = now_ns; |
| if (now_ns - ioc->autop_too_slow_at >= AUTOP_CYCLE_NSEC) |
| return idx - 1; |
| } else { |
| ioc->autop_too_slow_at = 0; |
| } |
| |
| return idx; |
| } |
| |
| /* |
| * Take the followings as input |
| * |
| * @bps maximum sequential throughput |
| * @seqiops maximum sequential 4k iops |
| * @randiops maximum random 4k iops |
| * |
| * and calculate the linear model cost coefficients. |
| * |
| * *@page per-page cost 1s / (@bps / 4096) |
| * *@seqio base cost of a seq IO max((1s / @seqiops) - *@page, 0) |
| * @randiops base cost of a rand IO max((1s / @randiops) - *@page, 0) |
| */ |
| static void calc_lcoefs(u64 bps, u64 seqiops, u64 randiops, |
| u64 *page, u64 *seqio, u64 *randio) |
| { |
| u64 v; |
| |
| *page = *seqio = *randio = 0; |
| |
| if (bps) |
| *page = DIV64_U64_ROUND_UP(VTIME_PER_SEC, |
| DIV_ROUND_UP_ULL(bps, IOC_PAGE_SIZE)); |
| |
| if (seqiops) { |
| v = DIV64_U64_ROUND_UP(VTIME_PER_SEC, seqiops); |
| if (v > *page) |
| *seqio = v - *page; |
| } |
| |
| if (randiops) { |
| v = DIV64_U64_ROUND_UP(VTIME_PER_SEC, randiops); |
| if (v > *page) |
| *randio = v - *page; |
| } |
| } |
| |
| static void ioc_refresh_lcoefs(struct ioc *ioc) |
| { |
| u64 *u = ioc->params.i_lcoefs; |
| u64 *c = ioc->params.lcoefs; |
| |
| calc_lcoefs(u[I_LCOEF_RBPS], u[I_LCOEF_RSEQIOPS], u[I_LCOEF_RRANDIOPS], |
| &c[LCOEF_RPAGE], &c[LCOEF_RSEQIO], &c[LCOEF_RRANDIO]); |
| calc_lcoefs(u[I_LCOEF_WBPS], u[I_LCOEF_WSEQIOPS], u[I_LCOEF_WRANDIOPS], |
| &c[LCOEF_WPAGE], &c[LCOEF_WSEQIO], &c[LCOEF_WRANDIO]); |
| } |
| |
| static bool ioc_refresh_params(struct ioc *ioc, bool force) |
| { |
| const struct ioc_params *p; |
| int idx; |
| |
| lockdep_assert_held(&ioc->lock); |
| |
| idx = ioc_autop_idx(ioc); |
| p = &autop[idx]; |
| |
| if (idx == ioc->autop_idx && !force) |
| return false; |
| |
| if (idx != ioc->autop_idx) |
| atomic64_set(&ioc->vtime_rate, VTIME_PER_USEC); |
| |
| ioc->autop_idx = idx; |
| ioc->autop_too_fast_at = 0; |
| ioc->autop_too_slow_at = 0; |
| |
| if (!ioc->user_qos_params) |
| memcpy(ioc->params.qos, p->qos, sizeof(p->qos)); |
| if (!ioc->user_cost_model) |
| memcpy(ioc->params.i_lcoefs, p->i_lcoefs, sizeof(p->i_lcoefs)); |
| |
| ioc_refresh_period_us(ioc); |
| ioc_refresh_lcoefs(ioc); |
| |
| ioc->vrate_min = DIV64_U64_ROUND_UP((u64)ioc->params.qos[QOS_MIN] * |
| VTIME_PER_USEC, MILLION); |
| ioc->vrate_max = div64_u64((u64)ioc->params.qos[QOS_MAX] * |
| VTIME_PER_USEC, MILLION); |
| |
| return true; |
| } |
| |
| /* take a snapshot of the current [v]time and vrate */ |
| static void ioc_now(struct ioc *ioc, struct ioc_now *now) |
| { |
| unsigned seq; |
| |
| now->now_ns = ktime_get(); |
| now->now = ktime_to_us(now->now_ns); |
| now->vrate = atomic64_read(&ioc->vtime_rate); |
| |
| /* |
| * The current vtime is |
| * |
| * vtime at period start + (wallclock time since the start) * vrate |
| * |
| * As a consistent snapshot of `period_at_vtime` and `period_at` is |
| * needed, they're seqcount protected. |
| */ |
| do { |
| seq = read_seqcount_begin(&ioc->period_seqcount); |
| now->vnow = ioc->period_at_vtime + |
| (now->now - ioc->period_at) * now->vrate; |
| } while (read_seqcount_retry(&ioc->period_seqcount, seq)); |
| } |
| |
| static void ioc_start_period(struct ioc *ioc, struct ioc_now *now) |
| { |
| lockdep_assert_held(&ioc->lock); |
| WARN_ON_ONCE(ioc->running != IOC_RUNNING); |
| |
| write_seqcount_begin(&ioc->period_seqcount); |
| ioc->period_at = now->now; |
| ioc->period_at_vtime = now->vnow; |
| write_seqcount_end(&ioc->period_seqcount); |
| |
| ioc->timer.expires = jiffies + usecs_to_jiffies(ioc->period_us); |
| add_timer(&ioc->timer); |
| } |
| |
| /* |
| * Update @iocg's `active` and `inuse` to @active and @inuse, update level |
| * weight sums and propagate upwards accordingly. |
| */ |
| static void __propagate_active_weight(struct ioc_gq *iocg, u32 active, u32 inuse) |
| { |
| struct ioc *ioc = iocg->ioc; |
| int lvl; |
| |
| lockdep_assert_held(&ioc->lock); |
| |
| inuse = min(active, inuse); |
| |
| for (lvl = iocg->level - 1; lvl >= 0; lvl--) { |
| struct ioc_gq *parent = iocg->ancestors[lvl]; |
| struct ioc_gq *child = iocg->ancestors[lvl + 1]; |
| u32 parent_active = 0, parent_inuse = 0; |
| |
| /* update the level sums */ |
| parent->child_active_sum += (s32)(active - child->active); |
| parent->child_inuse_sum += (s32)(inuse - child->inuse); |
| /* apply the udpates */ |
| child->active = active; |
| child->inuse = inuse; |
| |
| /* |
| * The delta between inuse and active sums indicates that |
| * that much of weight is being given away. Parent's inuse |
| * and active should reflect the ratio. |
| */ |
| if (parent->child_active_sum) { |
| parent_active = parent->weight; |
| parent_inuse = DIV64_U64_ROUND_UP( |
| parent_active * parent->child_inuse_sum, |
| parent->child_active_sum); |
| } |
| |
| /* do we need to keep walking up? */ |
| if (parent_active == parent->active && |
| parent_inuse == parent->inuse) |
| break; |
| |
| active = parent_active; |
| inuse = parent_inuse; |
| } |
| |
| ioc->weights_updated = true; |
| } |
| |
| static void commit_active_weights(struct ioc *ioc) |
| { |
| lockdep_assert_held(&ioc->lock); |
| |
| if (ioc->weights_updated) { |
| /* paired with rmb in current_hweight(), see there */ |
| smp_wmb(); |
| atomic_inc(&ioc->hweight_gen); |
| ioc->weights_updated = false; |
| } |
| } |
| |
| static void propagate_active_weight(struct ioc_gq *iocg, u32 active, u32 inuse) |
| { |
| __propagate_active_weight(iocg, active, inuse); |
| commit_active_weights(iocg->ioc); |
| } |
| |
| static void current_hweight(struct ioc_gq *iocg, u32 *hw_activep, u32 *hw_inusep) |
| { |
| struct ioc *ioc = iocg->ioc; |
| int lvl; |
| u32 hwa, hwi; |
| int ioc_gen; |
| |
| /* hot path - if uptodate, use cached */ |
| ioc_gen = atomic_read(&ioc->hweight_gen); |
| if (ioc_gen == iocg->hweight_gen) |
| goto out; |
| |
| /* |
| * Paired with wmb in commit_active_weights(). If we saw the |
| * updated hweight_gen, all the weight updates from |
| * __propagate_active_weight() are visible too. |
| * |
| * We can race with weight updates during calculation and get it |
| * wrong. However, hweight_gen would have changed and a future |
| * reader will recalculate and we're guaranteed to discard the |
| * wrong result soon. |
| */ |
| smp_rmb(); |
| |
| hwa = hwi = HWEIGHT_WHOLE; |
| for (lvl = 0; lvl <= iocg->level - 1; lvl++) { |
| struct ioc_gq *parent = iocg->ancestors[lvl]; |
| struct ioc_gq *child = iocg->ancestors[lvl + 1]; |
| u32 active_sum = READ_ONCE(parent->child_active_sum); |
| u32 inuse_sum = READ_ONCE(parent->child_inuse_sum); |
| u32 active = READ_ONCE(child->active); |
| u32 inuse = READ_ONCE(child->inuse); |
| |
| /* we can race with deactivations and either may read as zero */ |
| if (!active_sum || !inuse_sum) |
| continue; |
| |
| active_sum = max(active, active_sum); |
| hwa = hwa * active / active_sum; /* max 16bits * 10000 */ |
| |
| inuse_sum = max(inuse, inuse_sum); |
| hwi = hwi * inuse / inuse_sum; /* max 16bits * 10000 */ |
| } |
| |
| iocg->hweight_active = max_t(u32, hwa, 1); |
| iocg->hweight_inuse = max_t(u32, hwi, 1); |
| iocg->hweight_gen = ioc_gen; |
| out: |
| if (hw_activep) |
| *hw_activep = iocg->hweight_active; |
| if (hw_inusep) |
| *hw_inusep = iocg->hweight_inuse; |
| } |
| |
| static void weight_updated(struct ioc_gq *iocg) |
| { |
| struct ioc *ioc = iocg->ioc; |
| struct blkcg_gq *blkg = iocg_to_blkg(iocg); |
| struct ioc_cgrp *iocc = blkcg_to_iocc(blkg->blkcg); |
| u32 weight; |
| |
| lockdep_assert_held(&ioc->lock); |
| |
| weight = iocg->cfg_weight ?: iocc->dfl_weight; |
| if (weight != iocg->weight && iocg->active) |
| propagate_active_weight(iocg, weight, |
| DIV64_U64_ROUND_UP(iocg->inuse * weight, iocg->weight)); |
| iocg->weight = weight; |
| } |
| |
| static bool iocg_activate(struct ioc_gq *iocg, struct ioc_now *now) |
| { |
| struct ioc *ioc = iocg->ioc; |
| u64 last_period, cur_period, max_period_delta; |
| u64 vtime, vmargin, vmin; |
| int i; |
| |
| /* |
| * If seem to be already active, just update the stamp to tell the |
| * timer that we're still active. We don't mind occassional races. |
| */ |
| if (!list_empty(&iocg->active_list)) { |
| ioc_now(ioc, now); |
| cur_period = atomic64_read(&ioc->cur_period); |
| if (atomic64_read(&iocg->active_period) != cur_period) |
| atomic64_set(&iocg->active_period, cur_period); |
| return true; |
| } |
| |
| /* racy check on internal node IOs, treat as root level IOs */ |
| if (iocg->child_active_sum) |
| return false; |
| |
| spin_lock_irq(&ioc->lock); |
| |
| ioc_now(ioc, now); |
| |
| /* update period */ |
| cur_period = atomic64_read(&ioc->cur_period); |
| last_period = atomic64_read(&iocg->active_period); |
| atomic64_set(&iocg->active_period, cur_period); |
| |
| /* already activated or breaking leaf-only constraint? */ |
| for (i = iocg->level; i > 0; i--) |
| if (!list_empty(&iocg->active_list)) |
| goto fail_unlock; |
| if (iocg->child_active_sum) |
| goto fail_unlock; |
| |
| /* |
| * vtime may wrap when vrate is raised substantially due to |
| * underestimated IO costs. Look at the period and ignore its |
| * vtime if the iocg has been idle for too long. Also, cap the |
| * budget it can start with to the margin. |
| */ |
| max_period_delta = DIV64_U64_ROUND_UP(VTIME_VALID_DUR, ioc->period_us); |
| vtime = atomic64_read(&iocg->vtime); |
| vmargin = ioc->margin_us * now->vrate; |
| vmin = now->vnow - vmargin; |
| |
| if (last_period + max_period_delta < cur_period || |
| time_before64(vtime, vmin)) { |
| atomic64_add(vmin - vtime, &iocg->vtime); |
| atomic64_add(vmin - vtime, &iocg->done_vtime); |
| vtime = vmin; |
| } |
| |
| /* |
| * Activate, propagate weight and start period timer if not |
| * running. Reset hweight_gen to avoid accidental match from |
| * wrapping. |
| */ |
| iocg->hweight_gen = atomic_read(&ioc->hweight_gen) - 1; |
| list_add(&iocg->active_list, &ioc->active_iocgs); |
| propagate_active_weight(iocg, iocg->weight, |
| iocg->last_inuse ?: iocg->weight); |
| |
| TRACE_IOCG_PATH(iocg_activate, iocg, now, |
| last_period, cur_period, vtime); |
| |
| iocg->last_vtime = vtime; |
| |
| if (ioc->running == IOC_IDLE) { |
| ioc->running = IOC_RUNNING; |
| ioc_start_period(ioc, now); |
| } |
| |
| spin_unlock_irq(&ioc->lock); |
| return true; |
| |
| fail_unlock: |
| spin_unlock_irq(&ioc->lock); |
| return false; |
| } |
| |
| static int iocg_wake_fn(struct wait_queue_entry *wq_entry, unsigned mode, |
| int flags, void *key) |
| { |
| struct iocg_wait *wait = container_of(wq_entry, struct iocg_wait, wait); |
| struct iocg_wake_ctx *ctx = (struct iocg_wake_ctx *)key; |
| u64 cost = abs_cost_to_cost(wait->abs_cost, ctx->hw_inuse); |
| |
| ctx->vbudget -= cost; |
| |
| if (ctx->vbudget < 0) |
| return -1; |
| |
| iocg_commit_bio(ctx->iocg, wait->bio, cost); |
| |
| /* |
| * autoremove_wake_function() removes the wait entry only when it |
| * actually changed the task state. We want the wait always |
| * removed. Remove explicitly and use default_wake_function(). |
| */ |
| list_del_init(&wq_entry->entry); |
| wait->committed = true; |
| |
| default_wake_function(wq_entry, mode, flags, key); |
| return 0; |
| } |
| |
| static void iocg_kick_waitq(struct ioc_gq *iocg, struct ioc_now *now) |
| { |
| struct ioc *ioc = iocg->ioc; |
| struct iocg_wake_ctx ctx = { .iocg = iocg }; |
| u64 margin_ns = (u64)(ioc->period_us * |
| WAITQ_TIMER_MARGIN_PCT / 100) * NSEC_PER_USEC; |
| u64 abs_vdebt, vdebt, vshortage, expires, oexpires; |
| s64 vbudget; |
| u32 hw_inuse; |
| |
| lockdep_assert_held(&iocg->waitq.lock); |
| |
| current_hweight(iocg, NULL, &hw_inuse); |
| vbudget = now->vnow - atomic64_read(&iocg->vtime); |
| |
| /* pay off debt */ |
| abs_vdebt = atomic64_read(&iocg->abs_vdebt); |
| vdebt = abs_cost_to_cost(abs_vdebt, hw_inuse); |
| if (vdebt && vbudget > 0) { |
| u64 delta = min_t(u64, vbudget, vdebt); |
| u64 abs_delta = min(cost_to_abs_cost(delta, hw_inuse), |
| abs_vdebt); |
| |
| atomic64_add(delta, &iocg->vtime); |
| atomic64_add(delta, &iocg->done_vtime); |
| atomic64_sub(abs_delta, &iocg->abs_vdebt); |
| if (WARN_ON_ONCE(atomic64_read(&iocg->abs_vdebt) < 0)) |
| atomic64_set(&iocg->abs_vdebt, 0); |
| } |
| |
| /* |
| * Wake up the ones which are due and see how much vtime we'll need |
| * for the next one. |
| */ |
| ctx.hw_inuse = hw_inuse; |
| ctx.vbudget = vbudget - vdebt; |
| __wake_up_locked_key(&iocg->waitq, TASK_NORMAL, &ctx); |
| if (!waitqueue_active(&iocg->waitq)) |
| return; |
| if (WARN_ON_ONCE(ctx.vbudget >= 0)) |
| return; |
| |
| /* determine next wakeup, add a quarter margin to guarantee chunking */ |
| vshortage = -ctx.vbudget; |
| expires = now->now_ns + |
| DIV64_U64_ROUND_UP(vshortage, now->vrate) * NSEC_PER_USEC; |
| expires += margin_ns / 4; |
| |
| /* if already active and close enough, don't bother */ |
| oexpires = ktime_to_ns(hrtimer_get_softexpires(&iocg->waitq_timer)); |
| if (hrtimer_is_queued(&iocg->waitq_timer) && |
| abs(oexpires - expires) <= margin_ns / 4) |
| return; |
| |
| hrtimer_start_range_ns(&iocg->waitq_timer, ns_to_ktime(expires), |
| margin_ns / 4, HRTIMER_MODE_ABS); |
| } |
| |
| static enum hrtimer_restart iocg_waitq_timer_fn(struct hrtimer *timer) |
| { |
| struct ioc_gq *iocg = container_of(timer, struct ioc_gq, waitq_timer); |
| struct ioc_now now; |
| unsigned long flags; |
| |
| ioc_now(iocg->ioc, &now); |
| |
| spin_lock_irqsave(&iocg->waitq.lock, flags); |
| iocg_kick_waitq(iocg, &now); |
| spin_unlock_irqrestore(&iocg->waitq.lock, flags); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| static void iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now, u64 cost) |
| { |
| struct ioc *ioc = iocg->ioc; |
| struct blkcg_gq *blkg = iocg_to_blkg(iocg); |
| u64 vtime = atomic64_read(&iocg->vtime); |
| u64 vmargin = ioc->margin_us * now->vrate; |
| u64 margin_ns = ioc->margin_us * NSEC_PER_USEC; |
| u64 expires, oexpires; |
| u32 hw_inuse; |
| |
| /* debt-adjust vtime */ |
| current_hweight(iocg, NULL, &hw_inuse); |
| vtime += abs_cost_to_cost(atomic64_read(&iocg->abs_vdebt), hw_inuse); |
| |
| /* clear or maintain depending on the overage */ |
| if (time_before_eq64(vtime, now->vnow)) { |
| blkcg_clear_delay(blkg); |
| return; |
| } |
| if (!atomic_read(&blkg->use_delay) && |
| time_before_eq64(vtime, now->vnow + vmargin)) |
| return; |
| |
| /* use delay */ |
| if (cost) { |
| u64 cost_ns = DIV64_U64_ROUND_UP(cost * NSEC_PER_USEC, |
| now->vrate); |
| blkcg_add_delay(blkg, now->now_ns, cost_ns); |
| } |
| blkcg_use_delay(blkg); |
| |
| expires = now->now_ns + DIV64_U64_ROUND_UP(vtime - now->vnow, |
| now->vrate) * NSEC_PER_USEC; |
| |
| /* if already active and close enough, don't bother */ |
| oexpires = ktime_to_ns(hrtimer_get_softexpires(&iocg->delay_timer)); |
| if (hrtimer_is_queued(&iocg->delay_timer) && |
| abs(oexpires - expires) <= margin_ns / 4) |
| return; |
| |
| hrtimer_start_range_ns(&iocg->delay_timer, ns_to_ktime(expires), |
| margin_ns / 4, HRTIMER_MODE_ABS); |
| } |
| |
| static enum hrtimer_restart iocg_delay_timer_fn(struct hrtimer *timer) |
| { |
| struct ioc_gq *iocg = container_of(timer, struct ioc_gq, delay_timer); |
| struct ioc_now now; |
| |
| ioc_now(iocg->ioc, &now); |
| iocg_kick_delay(iocg, &now, 0); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| static void ioc_lat_stat(struct ioc *ioc, u32 *missed_ppm_ar, u32 *rq_wait_pct_p) |
| { |
| u32 nr_met[2] = { }; |
| u32 nr_missed[2] = { }; |
| u64 rq_wait_ns = 0; |
| int cpu, rw; |
| |
| for_each_online_cpu(cpu) { |
| struct ioc_pcpu_stat *stat = per_cpu_ptr(ioc->pcpu_stat, cpu); |
| u64 this_rq_wait_ns; |
| |
| for (rw = READ; rw <= WRITE; rw++) { |
| u32 this_met = READ_ONCE(stat->missed[rw].nr_met); |
| u32 this_missed = READ_ONCE(stat->missed[rw].nr_missed); |
| |
| nr_met[rw] += this_met - stat->missed[rw].last_met; |
| nr_missed[rw] += this_missed - stat->missed[rw].last_missed; |
| stat->missed[rw].last_met = this_met; |
| stat->missed[rw].last_missed = this_missed; |
| } |
| |
| this_rq_wait_ns = READ_ONCE(stat->rq_wait_ns); |
| rq_wait_ns += this_rq_wait_ns - stat->last_rq_wait_ns; |
| stat->last_rq_wait_ns = this_rq_wait_ns; |
| } |
| |
| for (rw = READ; rw <= WRITE; rw++) { |
| if (nr_met[rw] + nr_missed[rw]) |
| missed_ppm_ar[rw] = |
| DIV64_U64_ROUND_UP((u64)nr_missed[rw] * MILLION, |
| nr_met[rw] + nr_missed[rw]); |
| else |
| missed_ppm_ar[rw] = 0; |
| } |
| |
| *rq_wait_pct_p = div64_u64(rq_wait_ns * 100, |
| ioc->period_us * NSEC_PER_USEC); |
| } |
| |
| /* was iocg idle this period? */ |
| static bool iocg_is_idle(struct ioc_gq *iocg) |
| { |
| struct ioc *ioc = iocg->ioc; |
| |
| /* did something get issued this period? */ |
| if (atomic64_read(&iocg->active_period) == |
| atomic64_read(&ioc->cur_period)) |
| return false; |
| |
| /* is something in flight? */ |
| if (atomic64_read(&iocg->done_vtime) < atomic64_read(&iocg->vtime)) |
| return false; |
| |
| return true; |
| } |
| |
| /* returns usage with margin added if surplus is large enough */ |
| static u32 surplus_adjusted_hweight_inuse(u32 usage, u32 hw_inuse) |
| { |
| /* add margin */ |
| usage = DIV_ROUND_UP(usage * SURPLUS_SCALE_PCT, 100); |
| usage += SURPLUS_SCALE_ABS; |
| |
| /* don't bother if the surplus is too small */ |
| if (usage + SURPLUS_MIN_ADJ_DELTA > hw_inuse) |
| return 0; |
| |
| return usage; |
| } |
| |
| static void ioc_timer_fn(struct timer_list *timer) |
| { |
| struct ioc *ioc = container_of(timer, struct ioc, timer); |
| struct ioc_gq *iocg, *tiocg; |
| struct ioc_now now; |
| int nr_surpluses = 0, nr_shortages = 0, nr_lagging = 0; |
| u32 ppm_rthr = MILLION - ioc->params.qos[QOS_RPPM]; |
| u32 ppm_wthr = MILLION - ioc->params.qos[QOS_WPPM]; |
| u32 missed_ppm[2], rq_wait_pct; |
| u64 period_vtime; |
| int i; |
| |
| /* how were the latencies during the period? */ |
| ioc_lat_stat(ioc, missed_ppm, &rq_wait_pct); |
| |
| /* take care of active iocgs */ |
| spin_lock_irq(&ioc->lock); |
| |
| ioc_now(ioc, &now); |
| |
| period_vtime = now.vnow - ioc->period_at_vtime; |
| if (WARN_ON_ONCE(!period_vtime)) { |
| spin_unlock_irq(&ioc->lock); |
| return; |
| } |
| |
| /* |
| * Waiters determine the sleep durations based on the vrate they |
| * saw at the time of sleep. If vrate has increased, some waiters |
| * could be sleeping for too long. Wake up tardy waiters which |
| * should have woken up in the last period and expire idle iocgs. |
| */ |
| list_for_each_entry_safe(iocg, tiocg, &ioc->active_iocgs, active_list) { |
| if (!waitqueue_active(&iocg->waitq) && |
| !atomic64_read(&iocg->abs_vdebt) && !iocg_is_idle(iocg)) |
| continue; |
| |
| spin_lock(&iocg->waitq.lock); |
| |
| if (waitqueue_active(&iocg->waitq) || |
| atomic64_read(&iocg->abs_vdebt)) { |
| /* might be oversleeping vtime / hweight changes, kick */ |
| iocg_kick_waitq(iocg, &now); |
| iocg_kick_delay(iocg, &now, 0); |
| } else if (iocg_is_idle(iocg)) { |
| /* no waiter and idle, deactivate */ |
| iocg->last_inuse = iocg->inuse; |
| __propagate_active_weight(iocg, 0, 0); |
| list_del_init(&iocg->active_list); |
| } |
| |
| spin_unlock(&iocg->waitq.lock); |
| } |
| commit_active_weights(ioc); |
| |
| /* calc usages and see whether some weights need to be moved around */ |
| list_for_each_entry(iocg, &ioc->active_iocgs, active_list) { |
| u64 vdone, vtime, vusage, vmargin, vmin; |
| u32 hw_active, hw_inuse, usage; |
| |
| /* |
| * Collect unused and wind vtime closer to vnow to prevent |
| * iocgs from accumulating a large amount of budget. |
| */ |
| vdone = atomic64_read(&iocg->done_vtime); |
| vtime = atomic64_read(&iocg->vtime); |
| current_hweight(iocg, &hw_active, &hw_inuse); |
| |
| /* |
| * Latency QoS detection doesn't account for IOs which are |
| * in-flight for longer than a period. Detect them by |
| * comparing vdone against period start. If lagging behind |
| * IOs from past periods, don't increase vrate. |
| */ |
| if (!atomic_read(&iocg_to_blkg(iocg)->use_delay) && |
| time_after64(vtime, vdone) && |
| time_after64(vtime, now.vnow - |
| MAX_LAGGING_PERIODS * period_vtime) && |
| time_before64(vdone, now.vnow - period_vtime)) |
| nr_lagging++; |
| |
| if (waitqueue_active(&iocg->waitq)) |
| vusage = now.vnow - iocg->last_vtime; |
| else if (time_before64(iocg->last_vtime, vtime)) |
| vusage = vtime - iocg->last_vtime; |
| else |
| vusage = 0; |
| |
| iocg->last_vtime += vusage; |
| /* |
| * Factor in in-flight vtime into vusage to avoid |
| * high-latency completions appearing as idle. This should |
| * be done after the above ->last_time adjustment. |
| */ |
| vusage = max(vusage, vtime - vdone); |
| |
| /* calculate hweight based usage ratio and record */ |
| if (vusage) { |
| usage = DIV64_U64_ROUND_UP(vusage * hw_inuse, |
| period_vtime); |
| iocg->usage_idx = (iocg->usage_idx + 1) % NR_USAGE_SLOTS; |
| iocg->usages[iocg->usage_idx] = usage; |
| } else { |
| usage = 0; |
| } |
| |
| /* see whether there's surplus vtime */ |
| vmargin = ioc->margin_us * now.vrate; |
| vmin = now.vnow - vmargin; |
| |
| iocg->has_surplus = false; |
| |
| if (!waitqueue_active(&iocg->waitq) && |
| time_before64(vtime, vmin)) { |
| u64 delta = vmin - vtime; |
| |
| /* throw away surplus vtime */ |
| atomic64_add(delta, &iocg->vtime); |
| atomic64_add(delta, &iocg->done_vtime); |
| iocg->last_vtime += delta; |
| /* if usage is sufficiently low, maybe it can donate */ |
| if (surplus_adjusted_hweight_inuse(usage, hw_inuse)) { |
| iocg->has_surplus = true; |
| nr_surpluses++; |
| } |
| } else if (hw_inuse < hw_active) { |
| u32 new_hwi, new_inuse; |
| |
| /* was donating but might need to take back some */ |
| if (waitqueue_active(&iocg->waitq)) { |
| new_hwi = hw_active; |
| } else { |
| new_hwi = max(hw_inuse, |
| usage * SURPLUS_SCALE_PCT / 100 + |
| SURPLUS_SCALE_ABS); |
| } |
| |
| new_inuse = div64_u64((u64)iocg->inuse * new_hwi, |
| hw_inuse); |
| new_inuse = clamp_t(u32, new_inuse, 1, iocg->active); |
| |
| if (new_inuse > iocg->inuse) { |
| TRACE_IOCG_PATH(inuse_takeback, iocg, &now, |
| iocg->inuse, new_inuse, |
| hw_inuse, new_hwi); |
| __propagate_active_weight(iocg, iocg->weight, |
| new_inuse); |
| } |
| } else { |
| /* genuninely out of vtime */ |
| nr_shortages++; |
| } |
| } |
| |
| if (!nr_shortages || !nr_surpluses) |
| goto skip_surplus_transfers; |
| |
| /* there are both shortages and surpluses, transfer surpluses */ |
| list_for_each_entry(iocg, &ioc->active_iocgs, active_list) { |
| u32 usage, hw_active, hw_inuse, new_hwi, new_inuse; |
| int nr_valid = 0; |
| |
| if (!iocg->has_surplus) |
| continue; |
| |
| /* base the decision on max historical usage */ |
| for (i = 0, usage = 0; i < NR_USAGE_SLOTS; i++) { |
| if (iocg->usages[i]) { |
| usage = max(usage, iocg->usages[i]); |
| nr_valid++; |
| } |
| } |
| if (nr_valid < MIN_VALID_USAGES) |
| continue; |
| |
| current_hweight(iocg, &hw_active, &hw_inuse); |
| new_hwi = surplus_adjusted_hweight_inuse(usage, hw_inuse); |
| if (!new_hwi) |
| continue; |
| |
| new_inuse = DIV64_U64_ROUND_UP((u64)iocg->inuse * new_hwi, |
| hw_inuse); |
| if (new_inuse < iocg->inuse) { |
| TRACE_IOCG_PATH(inuse_giveaway, iocg, &now, |
| iocg->inuse, new_inuse, |
| hw_inuse, new_hwi); |
| __propagate_active_weight(iocg, iocg->weight, new_inuse); |
| } |
| } |
| skip_surplus_transfers: |
| commit_active_weights(ioc); |
| |
| /* |
| * If q is getting clogged or we're missing too much, we're issuing |
| * too much IO and should lower vtime rate. If we're not missing |
| * and experiencing shortages but not surpluses, we're too stingy |
| * and should increase vtime rate. |
| */ |
| if (rq_wait_pct > RQ_WAIT_BUSY_PCT || |
| missed_ppm[READ] > ppm_rthr || |
| missed_ppm[WRITE] > ppm_wthr) { |
| ioc->busy_level = max(ioc->busy_level, 0); |
| ioc->busy_level++; |
| } else if (nr_lagging) { |
| ioc->busy_level = max(ioc->busy_level, 0); |
| } else if (nr_shortages && !nr_surpluses && |
| rq_wait_pct <= RQ_WAIT_BUSY_PCT * UNBUSY_THR_PCT / 100 && |
| missed_ppm[READ] <= ppm_rthr * UNBUSY_THR_PCT / 100 && |
| missed_ppm[WRITE] <= ppm_wthr * UNBUSY_THR_PCT / 100) { |
| ioc->busy_level = min(ioc->busy_level, 0); |
| ioc->busy_level--; |
| } else { |
| ioc->busy_level = 0; |
| } |
| |
| ioc->busy_level = clamp(ioc->busy_level, -1000, 1000); |
| |
| if (ioc->busy_level) { |
| u64 vrate = atomic64_read(&ioc->vtime_rate); |
| u64 vrate_min = ioc->vrate_min, vrate_max = ioc->vrate_max; |
| |
| /* rq_wait signal is always reliable, ignore user vrate_min */ |
| if (rq_wait_pct > RQ_WAIT_BUSY_PCT) |
| vrate_min = VRATE_MIN; |
| |
| /* |
| * If vrate is out of bounds, apply clamp gradually as the |
| * bounds can change abruptly. Otherwise, apply busy_level |
| * based adjustment. |
| */ |
| if (vrate < vrate_min) { |
| vrate = div64_u64(vrate * (100 + VRATE_CLAMP_ADJ_PCT), |
| 100); |
| vrate = min(vrate, vrate_min); |
| } else if (vrate > vrate_max) { |
| vrate = div64_u64(vrate * (100 - VRATE_CLAMP_ADJ_PCT), |
| 100); |
| vrate = max(vrate, vrate_max); |
| } else { |
| int idx = min_t(int, abs(ioc->busy_level), |
| ARRAY_SIZE(vrate_adj_pct) - 1); |
| u32 adj_pct = vrate_adj_pct[idx]; |
| |
| if (ioc->busy_level > 0) |
| adj_pct = 100 - adj_pct; |
| else |
| adj_pct = 100 + adj_pct; |
| |
| vrate = clamp(DIV64_U64_ROUND_UP(vrate * adj_pct, 100), |
| vrate_min, vrate_max); |
| } |
| |
| trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct, |
| nr_lagging, nr_shortages, |
| nr_surpluses); |
| |
| atomic64_set(&ioc->vtime_rate, vrate); |
| ioc->inuse_margin_vtime = DIV64_U64_ROUND_UP( |
| ioc->period_us * vrate * INUSE_MARGIN_PCT, 100); |
| } |
| |
| ioc_refresh_params(ioc, false); |
| |
| /* |
| * This period is done. Move onto the next one. If nothing's |
| * going on with the device, stop the timer. |
| */ |
| atomic64_inc(&ioc->cur_period); |
| |
| if (ioc->running != IOC_STOP) { |
| if (!list_empty(&ioc->active_iocgs)) { |
| ioc_start_period(ioc, &now); |
| } else { |
| ioc->busy_level = 0; |
| ioc->running = IOC_IDLE; |
| } |
| } |
| |
| spin_unlock_irq(&ioc->lock); |
| } |
| |
| static void calc_vtime_cost_builtin(struct bio *bio, struct ioc_gq *iocg, |
| bool is_merge, u64 *costp) |
| { |
| struct ioc *ioc = iocg->ioc; |
| u64 coef_seqio, coef_randio, coef_page; |
| u64 pages = max_t(u64, bio_sectors(bio) >> IOC_SECT_TO_PAGE_SHIFT, 1); |
| u64 seek_pages = 0; |
| u64 cost = 0; |
| |
| switch (bio_op(bio)) { |
| case REQ_OP_READ: |
| coef_seqio = ioc->params.lcoefs[LCOEF_RSEQIO]; |
| coef_randio = ioc->params.lcoefs[LCOEF_RRANDIO]; |
| coef_page = ioc->params.lcoefs[LCOEF_RPAGE]; |
| break; |
| case REQ_OP_WRITE: |
| coef_seqio = ioc->params.lcoefs[LCOEF_WSEQIO]; |
| coef_randio = ioc->params.lcoefs[LCOEF_WRANDIO]; |
| coef_page = ioc->params.lcoefs[LCOEF_WPAGE]; |
| break; |
| default: |
| goto out; |
| } |
| |
| if (iocg->cursor) { |
| seek_pages = abs(bio->bi_iter.bi_sector - iocg->cursor); |
| seek_pages >>= IOC_SECT_TO_PAGE_SHIFT; |
| } |
| |
| if (!is_merge) { |
| if (seek_pages > LCOEF_RANDIO_PAGES) { |
| cost += coef_randio; |
| } else { |
| cost += coef_seqio; |
| } |
| } |
| cost += pages * coef_page; |
| out: |
| *costp = cost; |
| } |
| |
| static u64 calc_vtime_cost(struct bio *bio, struct ioc_gq *iocg, bool is_merge) |
| { |
| u64 cost; |
| |
| calc_vtime_cost_builtin(bio, iocg, is_merge, &cost); |
| return cost; |
| } |
| |
| static void ioc_rqos_throttle(struct rq_qos *rqos, struct bio *bio) |
| { |
| struct blkcg_gq *blkg = bio->bi_blkg; |
| struct ioc *ioc = rqos_to_ioc(rqos); |
| struct ioc_gq *iocg = blkg_to_iocg(blkg); |
| struct ioc_now now; |
| struct iocg_wait wait; |
| u32 hw_active, hw_inuse; |
| u64 abs_cost, cost, vtime; |
| |
| /* bypass IOs if disabled or for root cgroup */ |
| if (!ioc->enabled || !iocg->level) |
| return; |
| |
| /* always activate so that even 0 cost IOs get protected to some level */ |
| if (!iocg_activate(iocg, &now)) |
| return; |
| |
| /* calculate the absolute vtime cost */ |
| abs_cost = calc_vtime_cost(bio, iocg, false); |
| if (!abs_cost) |
| return; |
| |
| iocg->cursor = bio_end_sector(bio); |
| |
| vtime = atomic64_read(&iocg->vtime); |
| current_hweight(iocg, &hw_active, &hw_inuse); |
| |
| if (hw_inuse < hw_active && |
| time_after_eq64(vtime + ioc->inuse_margin_vtime, now.vnow)) { |
| TRACE_IOCG_PATH(inuse_reset, iocg, &now, |
| iocg->inuse, iocg->weight, hw_inuse, hw_active); |
| spin_lock_irq(&ioc->lock); |
| propagate_active_weight(iocg, iocg->weight, iocg->weight); |
| spin_unlock_irq(&ioc->lock); |
| current_hweight(iocg, &hw_active, &hw_inuse); |
| } |
| |
| cost = abs_cost_to_cost(abs_cost, hw_inuse); |
| |
| /* |
| * If no one's waiting and within budget, issue right away. The |
| * tests are racy but the races aren't systemic - we only miss once |
| * in a while which is fine. |
| */ |
| if (!waitqueue_active(&iocg->waitq) && |
| !atomic64_read(&iocg->abs_vdebt) && |
| time_before_eq64(vtime + cost, now.vnow)) { |
| iocg_commit_bio(iocg, bio, cost); |
| return; |
| } |
| |
| /* |
| * We're over budget. If @bio has to be issued regardless, |
| * remember the abs_cost instead of advancing vtime. |
| * iocg_kick_waitq() will pay off the debt before waking more IOs. |
| * This way, the debt is continuously paid off each period with the |
| * actual budget available to the cgroup. If we just wound vtime, |
| * we would incorrectly use the current hw_inuse for the entire |
| * amount which, for example, can lead to the cgroup staying |
| * blocked for a long time even with substantially raised hw_inuse. |
| */ |
| if (bio_issue_as_root_blkg(bio) || fatal_signal_pending(current)) { |
| atomic64_add(abs_cost, &iocg->abs_vdebt); |
| iocg_kick_delay(iocg, &now, cost); |
| return; |
| } |
| |
| /* |
| * Append self to the waitq and schedule the wakeup timer if we're |
| * the first waiter. The timer duration is calculated based on the |
| * current vrate. vtime and hweight changes can make it too short |
| * or too long. Each wait entry records the absolute cost it's |
| * waiting for to allow re-evaluation using a custom wait entry. |
| * |
| * If too short, the timer simply reschedules itself. If too long, |
| * the period timer will notice and trigger wakeups. |
| * |
| * All waiters are on iocg->waitq and the wait states are |
| * synchronized using waitq.lock. |
| */ |
| spin_lock_irq(&iocg->waitq.lock); |
| |
| /* |
| * We activated above but w/o any synchronization. Deactivation is |
| * synchronized with waitq.lock and we won't get deactivated as |
| * long as we're waiting, so we're good if we're activated here. |
| * In the unlikely case that we are deactivated, just issue the IO. |
| */ |
| if (unlikely(list_empty(&iocg->active_list))) { |
| spin_unlock_irq(&iocg->waitq.lock); |
| iocg_commit_bio(iocg, bio, cost); |
| return; |
| } |
| |
| init_waitqueue_func_entry(&wait.wait, iocg_wake_fn); |
| wait.wait.private = current; |
| wait.bio = bio; |
| wait.abs_cost = abs_cost; |
| wait.committed = false; /* will be set true by waker */ |
| |
| __add_wait_queue_entry_tail(&iocg->waitq, &wait.wait); |
| iocg_kick_waitq(iocg, &now); |
| |
| spin_unlock_irq(&iocg->waitq.lock); |
| |
| while (true) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| if (wait.committed) |
| break; |
| io_schedule(); |
| } |
| |
| /* waker already committed us, proceed */ |
| finish_wait(&iocg->waitq, &wait.wait); |
| } |
| |
| static void ioc_rqos_merge(struct rq_qos *rqos, struct request *rq, |
| struct bio *bio) |
| { |
| struct ioc_gq *iocg = blkg_to_iocg(bio->bi_blkg); |
| struct ioc *ioc = iocg->ioc; |
| sector_t bio_end = bio_end_sector(bio); |
| struct ioc_now now; |
| u32 hw_inuse; |
| u64 abs_cost, cost; |
| |
| /* bypass if disabled or for root cgroup */ |
| if (!ioc->enabled || !iocg->level) |
| return; |
| |
| abs_cost = calc_vtime_cost(bio, iocg, true); |
| if (!abs_cost) |
| return; |
| |
| ioc_now(ioc, &now); |
| current_hweight(iocg, NULL, &hw_inuse); |
| cost = abs_cost_to_cost(abs_cost, hw_inuse); |
| |
| /* update cursor if backmerging into the request at the cursor */ |
| if (blk_rq_pos(rq) < bio_end && |
| blk_rq_pos(rq) + blk_rq_sectors(rq) == iocg->cursor) |
| iocg->cursor = bio_end; |
| |
| /* |
| * Charge if there's enough vtime budget and the existing request |
| * has cost assigned. Otherwise, account it as debt. See debt |
| * handling in ioc_rqos_throttle() for details. |
| */ |
| if (rq->bio && rq->bio->bi_iocost_cost && |
| time_before_eq64(atomic64_read(&iocg->vtime) + cost, now.vnow)) |
| iocg_commit_bio(iocg, bio, cost); |
| else |
| atomic64_add(abs_cost, &iocg->abs_vdebt); |
| } |
| |
| static void ioc_rqos_done_bio(struct rq_qos *rqos, struct bio *bio) |
| { |
| struct ioc_gq *iocg = blkg_to_iocg(bio->bi_blkg); |
| |
| if (iocg && bio->bi_iocost_cost) |
| atomic64_add(bio->bi_iocost_cost, &iocg->done_vtime); |
| } |
| |
| static void ioc_rqos_done(struct rq_qos *rqos, struct request *rq) |
| { |
| struct ioc *ioc = rqos_to_ioc(rqos); |
| u64 on_q_ns, rq_wait_ns; |
| int pidx, rw; |
| |
| if (!ioc->enabled || !rq->alloc_time_ns || !rq->start_time_ns) |
| return; |
| |
| switch (req_op(rq) & REQ_OP_MASK) { |
| case REQ_OP_READ: |
| pidx = QOS_RLAT; |
| rw = READ; |
| break; |
| case REQ_OP_WRITE: |
| pidx = QOS_WLAT; |
| rw = WRITE; |
| break; |
| default: |
| return; |
| } |
| |
| on_q_ns = ktime_get_ns() - rq->alloc_time_ns; |
| rq_wait_ns = rq->start_time_ns - rq->alloc_time_ns; |
| |
| if (on_q_ns <= ioc->params.qos[pidx] * NSEC_PER_USEC) |
| this_cpu_inc(ioc->pcpu_stat->missed[rw].nr_met); |
| else |
| this_cpu_inc(ioc->pcpu_stat->missed[rw].nr_missed); |
| |
| this_cpu_add(ioc->pcpu_stat->rq_wait_ns, rq_wait_ns); |
| } |
| |
| static void ioc_rqos_queue_depth_changed(struct rq_qos *rqos) |
| { |
| struct ioc *ioc = rqos_to_ioc(rqos); |
| |
| spin_lock_irq(&ioc->lock); |
| ioc_refresh_params(ioc, false); |
| spin_unlock_irq(&ioc->lock); |
| } |
| |
| static void ioc_rqos_exit(struct rq_qos *rqos) |
| { |
| struct ioc *ioc = rqos_to_ioc(rqos); |
| |
| blkcg_deactivate_policy(rqos->q, &blkcg_policy_iocost); |
| |
| spin_lock_irq(&ioc->lock); |
| ioc->running = IOC_STOP; |
| spin_unlock_irq(&ioc->lock); |
| |
| del_timer_sync(&ioc->timer); |
| free_percpu(ioc->pcpu_stat); |
| kfree(ioc); |
| } |
| |
| static struct rq_qos_ops ioc_rqos_ops = { |
| .throttle = ioc_rqos_throttle, |
| .merge = ioc_rqos_merge, |
| .done_bio = ioc_rqos_done_bio, |
| .done = ioc_rqos_done, |
| .queue_depth_changed = ioc_rqos_queue_depth_changed, |
| .exit = ioc_rqos_exit, |
| }; |
| |
| static int blk_iocost_init(struct request_queue *q) |
| { |
| struct ioc *ioc; |
| struct rq_qos *rqos; |
| int ret; |
| |
| ioc = kzalloc(sizeof(*ioc), GFP_KERNEL); |
| if (!ioc) |
| return -ENOMEM; |
| |
| ioc->pcpu_stat = alloc_percpu(struct ioc_pcpu_stat); |
| if (!ioc->pcpu_stat) { |
| kfree(ioc); |
| return -ENOMEM; |
| } |
| |
| rqos = &ioc->rqos; |
| rqos->id = RQ_QOS_COST; |
| rqos->ops = &ioc_rqos_ops; |
| rqos->q = q; |
| |
| spin_lock_init(&ioc->lock); |
| timer_setup(&ioc->timer, ioc_timer_fn, 0); |
| INIT_LIST_HEAD(&ioc->active_iocgs); |
| |
| ioc->running = IOC_IDLE; |
| atomic64_set(&ioc->vtime_rate, VTIME_PER_USEC); |
| seqcount_init(&ioc->period_seqcount); |
| ioc->period_at = ktime_to_us(ktime_get()); |
| atomic64_set(&ioc->cur_period, 0); |
| atomic_set(&ioc->hweight_gen, 0); |
| |
| spin_lock_irq(&ioc->lock); |
| ioc->autop_idx = AUTOP_INVALID; |
| ioc_refresh_params(ioc, true); |
| spin_unlock_irq(&ioc->lock); |
| |
| rq_qos_add(q, rqos); |
| ret = blkcg_activate_policy(q, &blkcg_policy_iocost); |
| if (ret) { |
| rq_qos_del(q, rqos); |
| free_percpu(ioc->pcpu_stat); |
| kfree(ioc); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static struct blkcg_policy_data *ioc_cpd_alloc(gfp_t gfp) |
| { |
| struct ioc_cgrp *iocc; |
| |
| iocc = kzalloc(sizeof(struct ioc_cgrp), gfp); |
| if (!iocc) |
| return NULL; |
| |
| iocc->dfl_weight = CGROUP_WEIGHT_DFL; |
| return &iocc->cpd; |
| } |
| |
| static void ioc_cpd_free(struct blkcg_policy_data *cpd) |
| { |
| kfree(container_of(cpd, struct ioc_cgrp, cpd)); |
| } |
| |
| static struct blkg_policy_data *ioc_pd_alloc(gfp_t gfp, struct request_queue *q, |
| struct blkcg *blkcg) |
| { |
| int levels = blkcg->css.cgroup->level + 1; |
| struct ioc_gq *iocg; |
| |
| iocg = kzalloc_node(sizeof(*iocg) + levels * sizeof(iocg->ancestors[0]), |
| gfp, q->node); |
| if (!iocg) |
| return NULL; |
| |
| return &iocg->pd; |
| } |
| |
| static void ioc_pd_init(struct blkg_policy_data *pd) |
| { |
| struct ioc_gq *iocg = pd_to_iocg(pd); |
| struct blkcg_gq *blkg = pd_to_blkg(&iocg->pd); |
| struct ioc *ioc = q_to_ioc(blkg->q); |
| struct ioc_now now; |
| struct blkcg_gq *tblkg; |
| unsigned long flags; |
| |
| ioc_now(ioc, &now); |
| |
| iocg->ioc = ioc; |
| atomic64_set(&iocg->vtime, now.vnow); |
| atomic64_set(&iocg->done_vtime, now.vnow); |
| atomic64_set(&iocg->abs_vdebt, 0); |
| atomic64_set(&iocg->active_period, atomic64_read(&ioc->cur_period)); |
| INIT_LIST_HEAD(&iocg->active_list); |
| iocg->hweight_active = HWEIGHT_WHOLE; |
| iocg->hweight_inuse = HWEIGHT_WHOLE; |
| |
| init_waitqueue_head(&iocg->waitq); |
| hrtimer_init(&iocg->waitq_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); |
| iocg->waitq_timer.function = iocg_waitq_timer_fn; |
| hrtimer_init(&iocg->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); |
| iocg->delay_timer.function = iocg_delay_timer_fn; |
| |
| iocg->level = blkg->blkcg->css.cgroup->level; |
| |
| for (tblkg = blkg; tblkg; tblkg = tblkg->parent) { |
| struct ioc_gq *tiocg = blkg_to_iocg(tblkg); |
| iocg->ancestors[tiocg->level] = tiocg; |
| } |
| |
| spin_lock_irqsave(&ioc->lock, flags); |
| weight_updated(iocg); |
| spin_unlock_irqrestore(&ioc->lock, flags); |
| } |
| |
| static void ioc_pd_free(struct blkg_policy_data *pd) |
| { |
| struct ioc_gq *iocg = pd_to_iocg(pd); |
| struct ioc *ioc = iocg->ioc; |
| |
| if (ioc) { |
| spin_lock(&ioc->lock); |
| if (!list_empty(&iocg->active_list)) { |
| propagate_active_weight(iocg, 0, 0); |
| list_del_init(&iocg->active_list); |
| } |
| spin_unlock(&ioc->lock); |
| |
| hrtimer_cancel(&iocg->waitq_timer); |
| hrtimer_cancel(&iocg->delay_timer); |
| } |
| kfree(iocg); |
| } |
| |
| static u64 ioc_weight_prfill(struct seq_file *sf, struct blkg_policy_data *pd, |
| int off) |
| { |
| const char *dname = blkg_dev_name(pd->blkg); |
| struct ioc_gq *iocg = pd_to_iocg(pd); |
| |
| if (dname && iocg->cfg_weight) |
| seq_printf(sf, "%s %u\n", dname, iocg->cfg_weight); |
| return 0; |
| } |
| |
| |
| static int ioc_weight_show(struct seq_file *sf, void *v) |
| { |
| struct blkcg *blkcg = css_to_blkcg(seq_css(sf)); |
| struct ioc_cgrp *iocc = blkcg_to_iocc(blkcg); |
| |
| seq_printf(sf, "default %u\n", iocc->dfl_weight); |
| blkcg_print_blkgs(sf, blkcg, ioc_weight_prfill, |
| &blkcg_policy_iocost, seq_cft(sf)->private, false); |
| return 0; |
| } |
| |
| static ssize_t ioc_weight_write(struct kernfs_open_file *of, char *buf, |
| size_t nbytes, loff_t off) |
| { |
| struct blkcg *blkcg = css_to_blkcg(of_css(of)); |
| struct ioc_cgrp *iocc = blkcg_to_iocc(blkcg); |
| struct blkg_conf_ctx ctx; |
| struct ioc_gq *iocg; |
| u32 v; |
| int ret; |
| |
| if (!strchr(buf, ':')) { |
| struct blkcg_gq *blkg; |
| |
| if (!sscanf(buf, "default %u", &v) && !sscanf(buf, "%u", &v)) |
| return -EINVAL; |
| |
| if (v < CGROUP_WEIGHT_MIN || v > CGROUP_WEIGHT_MAX) |
| return -EINVAL; |
| |
| spin_lock(&blkcg->lock); |
| iocc->dfl_weight = v; |
| hlist_for_each_entry(blkg, &blkcg->blkg_list, blkcg_node) { |
| struct ioc_gq *iocg = blkg_to_iocg(blkg); |
| |
| if (iocg) { |
| spin_lock_irq(&iocg->ioc->lock); |
| weight_updated(iocg); |
| spin_unlock_irq(&iocg->ioc->lock); |
| } |
| } |
| spin_unlock(&blkcg->lock); |
| |
| return nbytes; |
| } |
| |
| ret = blkg_conf_prep(blkcg, &blkcg_policy_iocost, buf, &ctx); |
| if (ret) |
| return ret; |
| |
| iocg = blkg_to_iocg(ctx.blkg); |
| |
| if (!strncmp(ctx.body, "default", 7)) { |
| v = 0; |
| } else { |
| if (!sscanf(ctx.body, "%u", &v)) |
| goto einval; |
| if (v < CGROUP_WEIGHT_MIN || v > CGROUP_WEIGHT_MAX) |
| goto einval; |
| } |
| |
| spin_lock_irq(&iocg->ioc->lock); |
| iocg->cfg_weight = v; |
| weight_updated(iocg); |
| spin_unlock_irq(&iocg->ioc->lock); |
| |
| blkg_conf_finish(&ctx); |
| return nbytes; |
| |
| einval: |
| blkg_conf_finish(&ctx); |
| return -EINVAL; |
| } |
| |
| static u64 ioc_qos_prfill(struct seq_file *sf, struct blkg_policy_data *pd, |
| int off) |
| { |
| const char *dname = blkg_dev_name(pd->blkg); |
| struct ioc *ioc = pd_to_iocg(pd)->ioc; |
| |
| if (!dname) |
| return 0; |
| |
| seq_printf(sf, "%s enable=%d ctrl=%s rpct=%u.%02u rlat=%u wpct=%u.%02u wlat=%u min=%u.%02u max=%u.%02u\n", |
| dname, ioc->enabled, ioc->user_qos_params ? "user" : "auto", |
| ioc->params.qos[QOS_RPPM] / 10000, |
| ioc->params.qos[QOS_RPPM] % 10000 / 100, |
| ioc->params.qos[QOS_RLAT], |
| ioc->params.qos[QOS_WPPM] / 10000, |
| ioc->params.qos[QOS_WPPM] % 10000 / 100, |
| ioc->params.qos[QOS_WLAT], |
| ioc->params.qos[QOS_MIN] / 10000, |
| ioc->params.qos[QOS_MIN] % 10000 / 100, |
| ioc->params.qos[QOS_MAX] / 10000, |
| ioc->params.qos[QOS_MAX] % 10000 / 100); |
| return 0; |
| } |
| |
| static int ioc_qos_show(struct seq_file *sf, void *v) |
| { |
| struct blkcg *blkcg = css_to_blkcg(seq_css(sf)); |
| |
| blkcg_print_blkgs(sf, blkcg, ioc_qos_prfill, |
| &blkcg_policy_iocost, seq_cft(sf)->private, false); |
| return 0; |
| } |
| |
| static const match_table_t qos_ctrl_tokens = { |
| { QOS_ENABLE, "enable=%u" }, |
| { QOS_CTRL, "ctrl=%s" }, |
| { NR_QOS_CTRL_PARAMS, NULL }, |
| }; |
| |
| static const match_table_t qos_tokens = { |
| { QOS_RPPM, "rpct=%s" }, |
| { QOS_RLAT, "rlat=%u" }, |
| { QOS_WPPM, "wpct=%s" }, |
| { QOS_WLAT, "wlat=%u" }, |
| { QOS_MIN, "min=%s" }, |
| { QOS_MAX, "max=%s" }, |
| { NR_QOS_PARAMS, NULL }, |
| }; |
| |
| static ssize_t ioc_qos_write(struct kernfs_open_file *of, char *input, |
| size_t nbytes, loff_t off) |
| { |
| struct gendisk *disk; |
| struct ioc *ioc; |
| u32 qos[NR_QOS_PARAMS]; |
| bool enable, user; |
| char *p; |
| int ret; |
| |
| disk = blkcg_conf_get_disk(&input); |
| if (IS_ERR(disk)) |
| return PTR_ERR(disk); |
| |
| ioc = q_to_ioc(disk->queue); |
| if (!ioc) { |
| ret = blk_iocost_init(disk->queue); |
| if (ret) |
| goto err; |
| ioc = q_to_ioc(disk->queue); |
| } |
| |
| spin_lock_irq(&ioc->lock); |
| memcpy(qos, ioc->params.qos, sizeof(qos)); |
| enable = ioc->enabled; |
| user = ioc->user_qos_params; |
| spin_unlock_irq(&ioc->lock); |
| |
| while ((p = strsep(&input, " \t\n"))) { |
| substring_t args[MAX_OPT_ARGS]; |
| char buf[32]; |
| int tok; |
| s64 v; |
| |
| if (!*p) |
| continue; |
| |
| switch (match_token(p, qos_ctrl_tokens, args)) { |
| case QOS_ENABLE: |
| match_u64(&args[0], &v); |
| enable = v; |
| continue; |
| case QOS_CTRL: |
| match_strlcpy(buf, &args[0], sizeof(buf)); |
| if (!strcmp(buf, "auto")) |
| user = false; |
| else if (!strcmp(buf, "user")) |
| user = true; |
| else |
| goto einval; |
| continue; |
| } |
| |
| tok = match_token(p, qos_tokens, args); |
| switch (tok) { |
| case QOS_RPPM: |
| case QOS_WPPM: |
| if (match_strlcpy(buf, &args[0], sizeof(buf)) >= |
| sizeof(buf)) |
| goto einval; |
| if (cgroup_parse_float(buf, 2, &v)) |
| goto einval; |
| if (v < 0 || v > 10000) |
| goto einval; |
| qos[tok] = v * 100; |
| break; |
| case QOS_RLAT: |
| case QOS_WLAT: |
| if (match_u64(&args[0], &v)) |
| goto einval; |
| qos[tok] = v; |
| break; |
| case QOS_MIN: |
| case QOS_MAX: |
| if (match_strlcpy(buf, &args[0], sizeof(buf)) >= |
| sizeof(buf)) |
| goto einval; |
| if (cgroup_parse_float(buf, 2, &v)) |
| goto einval; |
| if (v < 0) |
| goto einval; |
| qos[tok] = clamp_t(s64, v * 100, |
| VRATE_MIN_PPM, VRATE_MAX_PPM); |
| break; |
| default: |
| goto einval; |
| } |
| user = true; |
| } |
| |
| if (qos[QOS_MIN] > qos[QOS_MAX]) |
| goto einval; |
| |
| spin_lock_irq(&ioc->lock); |
| |
| if (enable) { |
| blk_queue_flag_set(QUEUE_FLAG_RQ_ALLOC_TIME, ioc->rqos.q); |
| ioc->enabled = true; |
| } else { |
| blk_queue_flag_clear(QUEUE_FLAG_RQ_ALLOC_TIME, ioc->rqos.q); |
| ioc->enabled = false; |
| } |
| |
| if (user) { |
| memcpy(ioc->params.qos, qos, sizeof(qos)); |
| ioc->user_qos_params = true; |
| } else { |
| ioc->user_qos_params = false; |
| } |
| |
| ioc_refresh_params(ioc, true); |
| spin_unlock_irq(&ioc->lock); |
| |
| put_disk_and_module(disk); |
| return nbytes; |
| einval: |
| ret = -EINVAL; |
| err: |
| put_disk_and_module(disk); |
| return ret; |
| } |
| |
| static u64 ioc_cost_model_prfill(struct seq_file *sf, |
| struct blkg_policy_data *pd, int off) |
| { |
| const char *dname = blkg_dev_name(pd->blkg); |
| struct ioc *ioc = pd_to_iocg(pd)->ioc; |
| u64 *u = ioc->params.i_lcoefs; |
| |
| if (!dname) |
| return 0; |
| |
| seq_printf(sf, "%s ctrl=%s model=linear " |
| "rbps=%llu rseqiops=%llu rrandiops=%llu " |
| "wbps=%llu wseqiops=%llu wrandiops=%llu\n", |
| dname, ioc->user_cost_model ? "user" : "auto", |
| u[I_LCOEF_RBPS], u[I_LCOEF_RSEQIOPS], u[I_LCOEF_RRANDIOPS], |
| u[I_LCOEF_WBPS], u[I_LCOEF_WSEQIOPS], u[I_LCOEF_WRANDIOPS]); |
| return 0; |
| } |
| |
| static int ioc_cost_model_show(struct seq_file *sf, void *v) |
| { |
| struct blkcg *blkcg = css_to_blkcg(seq_css(sf)); |
| |
| blkcg_print_blkgs(sf, blkcg, ioc_cost_model_prfill, |
| &blkcg_policy_iocost, seq_cft(sf)->private, false); |
| return 0; |
| } |
| |
| static const match_table_t cost_ctrl_tokens = { |
| { COST_CTRL, "ctrl=%s" }, |
| { COST_MODEL, "model=%s" }, |
| { NR_COST_CTRL_PARAMS, NULL }, |
| }; |
| |
| static const match_table_t i_lcoef_tokens = { |
| { I_LCOEF_RBPS, "rbps=%u" }, |
| { I_LCOEF_RSEQIOPS, "rseqiops=%u" }, |
| { I_LCOEF_RRANDIOPS, "rrandiops=%u" }, |
| { I_LCOEF_WBPS, "wbps=%u" }, |
| { I_LCOEF_WSEQIOPS, "wseqiops=%u" }, |
| { I_LCOEF_WRANDIOPS, "wrandiops=%u" }, |
| { NR_I_LCOEFS, NULL }, |
| }; |
| |
| static ssize_t ioc_cost_model_write(struct kernfs_open_file *of, char *input, |
| size_t nbytes, loff_t off) |
| { |
| struct gendisk *disk; |
| struct ioc *ioc; |
| u64 u[NR_I_LCOEFS]; |
| bool user; |
| char *p; |
| int ret; |
| |
| disk = blkcg_conf_get_disk(&input); |
| if (IS_ERR(disk)) |
| return PTR_ERR(disk); |
| |
| ioc = q_to_ioc(disk->queue); |
| if (!ioc) { |
| ret = blk_iocost_init(disk->queue); |
| if (ret) |
| goto err; |
| ioc = q_to_ioc(disk->queue); |
| } |
| |
| spin_lock_irq(&ioc->lock); |
| memcpy(u, ioc->params.i_lcoefs, sizeof(u)); |
| user = ioc->user_cost_model; |
| spin_unlock_irq(&ioc->lock); |
| |
| while ((p = strsep(&input, " \t\n"))) { |
| substring_t args[MAX_OPT_ARGS]; |
| char buf[32]; |
| int tok; |
| u64 v; |
| |
| if (!*p) |
| continue; |
| |
| switch (match_token(p, cost_ctrl_tokens, args)) { |
| case COST_CTRL: |
| match_strlcpy(buf, &args[0], sizeof(buf)); |
| if (!strcmp(buf, "auto")) |
| user = false; |
| else if (!strcmp(buf, "user")) |
| user = true; |
| else |
| goto einval; |
| continue; |
| case COST_MODEL: |
| match_strlcpy(buf, &args[0], sizeof(buf)); |
| if (strcmp(buf, "linear")) |
| goto einval; |
| continue; |
| } |
| |
| tok = match_token(p, i_lcoef_tokens, args); |
| if (tok == NR_I_LCOEFS) |
| goto einval; |
| if (match_u64(&args[0], &v)) |
| goto einval; |
| u[tok] = v; |
| user = true; |
| } |
| |
| spin_lock_irq(&ioc->lock); |
| if (user) { |
| memcpy(ioc->params.i_lcoefs, u, sizeof(u)); |
| ioc->user_cost_model = true; |
| } else { |
| ioc->user_cost_model = false; |
| } |
| ioc_refresh_params(ioc, true); |
| spin_unlock_irq(&ioc->lock); |
| |
| put_disk_and_module(disk); |
| return nbytes; |
| |
| einval: |
| ret = -EINVAL; |
| err: |
| put_disk_and_module(disk); |
| return ret; |
| } |
| |
| static struct cftype ioc_files[] = { |
| { |
| .name = "weight", |
| .flags = CFTYPE_NOT_ON_ROOT, |
| .seq_show = ioc_weight_show, |
| .write = ioc_weight_write, |
| }, |
| { |
| .name = "cost.qos", |
| .flags = CFTYPE_ONLY_ON_ROOT, |
| .seq_show = ioc_qos_show, |
| .write = ioc_qos_write, |
| }, |
| { |
| .name = "cost.model", |
| .flags = CFTYPE_ONLY_ON_ROOT, |
| .seq_show = ioc_cost_model_show, |
| .write = ioc_cost_model_write, |
| }, |
| {} |
| }; |
| |
| static struct blkcg_policy blkcg_policy_iocost = { |
| .dfl_cftypes = ioc_files, |
| .cpd_alloc_fn = ioc_cpd_alloc, |
| .cpd_free_fn = ioc_cpd_free, |
| .pd_alloc_fn = ioc_pd_alloc, |
| .pd_init_fn = ioc_pd_init, |
| .pd_free_fn = ioc_pd_free, |
| }; |
| |
| static int __init ioc_init(void) |
| { |
| return blkcg_policy_register(&blkcg_policy_iocost); |
| } |
| |
| static void __exit ioc_exit(void) |
| { |
| return blkcg_policy_unregister(&blkcg_policy_iocost); |
| } |
| |
| module_init(ioc_init); |
| module_exit(ioc_exit); |