| /* |
| * Freescale GPMI NAND Flash Driver |
| * |
| * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. |
| * Copyright (C) 2008 Embedded Alley Solutions, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H |
| #define __DRIVERS_MTD_NAND_GPMI_NAND_H |
| |
| #include <linux/mtd/nand.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/fsl/mxs-dma.h> |
| |
| #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */ |
| struct resources { |
| void __iomem *gpmi_regs; |
| void __iomem *bch_regs; |
| unsigned int bch_low_interrupt; |
| unsigned int bch_high_interrupt; |
| unsigned int dma_low_channel; |
| unsigned int dma_high_channel; |
| struct clk *clock[GPMI_CLK_MAX]; |
| }; |
| |
| /** |
| * struct bch_geometry - BCH geometry description. |
| * @gf_len: The length of Galois Field. (e.g., 13 or 14) |
| * @ecc_strength: A number that describes the strength of the ECC |
| * algorithm. |
| * @page_size: The size, in bytes, of a physical page, including |
| * both data and OOB. |
| * @metadata_size: The size, in bytes, of the metadata. |
| * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note |
| * the first chunk in the page includes both data and |
| * metadata, so it's a bit larger than this value. |
| * @ecc_chunk_count: The number of ECC chunks in the page, |
| * @payload_size: The size, in bytes, of the payload buffer. |
| * @auxiliary_size: The size, in bytes, of the auxiliary buffer. |
| * @auxiliary_status_offset: The offset into the auxiliary buffer at which |
| * the ECC status appears. |
| * @block_mark_byte_offset: The byte offset in the ECC-based page view at |
| * which the underlying physical block mark appears. |
| * @block_mark_bit_offset: The bit offset into the ECC-based page view at |
| * which the underlying physical block mark appears. |
| */ |
| struct bch_geometry { |
| unsigned int gf_len; |
| unsigned int ecc_strength; |
| unsigned int page_size; |
| unsigned int metadata_size; |
| unsigned int ecc_chunk_size; |
| unsigned int ecc_chunk_count; |
| unsigned int payload_size; |
| unsigned int auxiliary_size; |
| unsigned int auxiliary_status_offset; |
| unsigned int block_mark_byte_offset; |
| unsigned int block_mark_bit_offset; |
| }; |
| |
| /** |
| * struct boot_rom_geometry - Boot ROM geometry description. |
| * @stride_size_in_pages: The size of a boot block stride, in pages. |
| * @search_area_stride_exponent: The logarithm to base 2 of the size of a |
| * search area in boot block strides. |
| */ |
| struct boot_rom_geometry { |
| unsigned int stride_size_in_pages; |
| unsigned int search_area_stride_exponent; |
| }; |
| |
| /* DMA operations types */ |
| enum dma_ops_type { |
| DMA_FOR_COMMAND = 1, |
| DMA_FOR_READ_DATA, |
| DMA_FOR_WRITE_DATA, |
| DMA_FOR_READ_ECC_PAGE, |
| DMA_FOR_WRITE_ECC_PAGE |
| }; |
| |
| /** |
| * struct nand_timing - Fundamental timing attributes for NAND. |
| * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the |
| * maximum of tDS and tWP. A negative value |
| * indicates this characteristic isn't known. |
| * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the |
| * maximum of tDH, tWH and tREH. A negative value |
| * indicates this characteristic isn't known. |
| * @address_setup_in_ns: The address setup time, in nanoseconds. Usually |
| * the maximum of tCLS, tCS and tALS. A negative |
| * value indicates this characteristic isn't known. |
| * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value |
| * indicates this characteristic isn't known. |
| * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A |
| * negative value indicates this characteristic isn't |
| * known. |
| * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A |
| * negative value indicates this characteristic isn't |
| * known. |
| * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A |
| * negative value indicates this characteristic isn't |
| * known. |
| */ |
| struct nand_timing { |
| int8_t data_setup_in_ns; |
| int8_t data_hold_in_ns; |
| int8_t address_setup_in_ns; |
| int8_t gpmi_sample_delay_in_ns; |
| int8_t tREA_in_ns; |
| int8_t tRLOH_in_ns; |
| int8_t tRHOH_in_ns; |
| }; |
| |
| struct gpmi_nand_data { |
| /* flags */ |
| #define GPMI_ASYNC_EDO_ENABLED (1 << 0) |
| #define GPMI_TIMING_INIT_OK (1 << 1) |
| int flags; |
| |
| /* System Interface */ |
| struct device *dev; |
| struct platform_device *pdev; |
| |
| /* Resources */ |
| struct resources resources; |
| |
| /* Flash Hardware */ |
| struct nand_timing timing; |
| int timing_mode; |
| |
| /* BCH */ |
| struct bch_geometry bch_geometry; |
| struct completion bch_done; |
| |
| /* NAND Boot issue */ |
| bool swap_block_mark; |
| struct boot_rom_geometry rom_geometry; |
| |
| /* MTD / NAND */ |
| struct nand_chip nand; |
| struct mtd_info mtd; |
| |
| /* General-use Variables */ |
| int current_chip; |
| unsigned int command_length; |
| |
| /* passed from upper layer */ |
| uint8_t *upper_buf; |
| int upper_len; |
| |
| /* for DMA operations */ |
| bool direct_dma_map_ok; |
| |
| struct scatterlist cmd_sgl; |
| char *cmd_buffer; |
| |
| struct scatterlist data_sgl; |
| char *data_buffer_dma; |
| |
| void *page_buffer_virt; |
| dma_addr_t page_buffer_phys; |
| unsigned int page_buffer_size; |
| |
| void *payload_virt; |
| dma_addr_t payload_phys; |
| |
| void *auxiliary_virt; |
| dma_addr_t auxiliary_phys; |
| |
| /* DMA channels */ |
| #define DMA_CHANS 8 |
| struct dma_chan *dma_chans[DMA_CHANS]; |
| struct mxs_dma_data dma_data; |
| enum dma_ops_type last_dma_type; |
| enum dma_ops_type dma_type; |
| struct completion dma_done; |
| |
| /* private */ |
| void *private; |
| }; |
| |
| /** |
| * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters. |
| * @data_setup_in_cycles: The data setup time, in cycles. |
| * @data_hold_in_cycles: The data hold time, in cycles. |
| * @address_setup_in_cycles: The address setup time, in cycles. |
| * @device_busy_timeout: The timeout waiting for NAND Ready/Busy, |
| * this value is the number of cycles multiplied |
| * by 4096. |
| * @use_half_periods: Indicates the clock is running slowly, so the |
| * NFC DLL should use half-periods. |
| * @sample_delay_factor: The sample delay factor. |
| * @wrn_dly_sel: The delay on the GPMI write strobe. |
| */ |
| struct gpmi_nfc_hardware_timing { |
| /* for HW_GPMI_TIMING0 */ |
| uint8_t data_setup_in_cycles; |
| uint8_t data_hold_in_cycles; |
| uint8_t address_setup_in_cycles; |
| |
| /* for HW_GPMI_TIMING1 */ |
| uint16_t device_busy_timeout; |
| #define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/ |
| |
| /* for HW_GPMI_CTRL1 */ |
| bool use_half_periods; |
| uint8_t sample_delay_factor; |
| uint8_t wrn_dly_sel; |
| }; |
| |
| /** |
| * struct timing_threshod - Timing threshold |
| * @max_data_setup_cycles: The maximum number of data setup cycles that |
| * can be expressed in the hardware. |
| * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires |
| * for data read internal setup. In the Reference |
| * Manual, see the chapter "High-Speed NAND |
| * Timing" for more details. |
| * @max_sample_delay_factor: The maximum sample delay factor that can be |
| * expressed in the hardware. |
| * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the |
| * sample delay DLL hardware can possibly work |
| * with (the DLL is unusable with longer periods). |
| * If the full-cycle period is greater than HALF |
| * this value, the DLL must be configured to use |
| * half-periods. |
| * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the |
| * DLL can implement. |
| * @clock_frequency_in_hz: The clock frequency, in Hz, during the current |
| * I/O transaction. If no I/O transaction is in |
| * progress, this is the clock frequency during |
| * the most recent I/O transaction. |
| */ |
| struct timing_threshod { |
| const unsigned int max_chip_count; |
| const unsigned int max_data_setup_cycles; |
| const unsigned int internal_data_setup_in_ns; |
| const unsigned int max_sample_delay_factor; |
| const unsigned int max_dll_clock_period_in_ns; |
| const unsigned int max_dll_delay_in_ns; |
| unsigned long clock_frequency_in_hz; |
| |
| }; |
| |
| /* Common Services */ |
| extern int common_nfc_set_geometry(struct gpmi_nand_data *); |
| extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *); |
| extern void prepare_data_dma(struct gpmi_nand_data *, |
| enum dma_data_direction dr); |
| extern int start_dma_without_bch_irq(struct gpmi_nand_data *, |
| struct dma_async_tx_descriptor *); |
| extern int start_dma_with_bch_irq(struct gpmi_nand_data *, |
| struct dma_async_tx_descriptor *); |
| |
| /* GPMI-NAND helper function library */ |
| extern int gpmi_init(struct gpmi_nand_data *); |
| extern int gpmi_extra_init(struct gpmi_nand_data *); |
| extern void gpmi_clear_bch(struct gpmi_nand_data *); |
| extern void gpmi_dump_info(struct gpmi_nand_data *); |
| extern int bch_set_geometry(struct gpmi_nand_data *); |
| extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip); |
| extern int gpmi_send_command(struct gpmi_nand_data *); |
| extern void gpmi_begin(struct gpmi_nand_data *); |
| extern void gpmi_end(struct gpmi_nand_data *); |
| extern int gpmi_read_data(struct gpmi_nand_data *); |
| extern int gpmi_send_data(struct gpmi_nand_data *); |
| extern int gpmi_send_page(struct gpmi_nand_data *, |
| dma_addr_t payload, dma_addr_t auxiliary); |
| extern int gpmi_read_page(struct gpmi_nand_data *, |
| dma_addr_t payload, dma_addr_t auxiliary); |
| |
| /* BCH : Status Block Completion Codes */ |
| #define STATUS_GOOD 0x00 |
| #define STATUS_ERASED 0xff |
| #define STATUS_UNCORRECTABLE 0xfe |
| |
| /* BCH's bit correction capability. */ |
| #define MXS_ECC_STRENGTH_MAX 20 /* mx23 and mx28 */ |
| #define MX6_ECC_STRENGTH_MAX 40 |
| |
| /* Use the platform_id to distinguish different Archs. */ |
| #define IS_MX23 0x0 |
| #define IS_MX28 0x1 |
| #define IS_MX6Q 0x2 |
| #define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23) |
| #define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28) |
| #define GPMI_IS_MX6Q(x) ((x)->pdev->id_entry->driver_data == IS_MX6Q) |
| #endif |