blob: 306d1efeb5e09a8a5aeca0cf3a7305e8c3f9f36a [file] [log] [blame]
/*
* Copyright (c) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#ifndef __DRM_FOURCC_H__
#define __DRM_FOURCC_H__
#include <linux/types.h>
#include <uapi/drm/drm_fourcc.h>
/*
* DRM formats are little endian. Define host endian variants for the
* most common formats here, to reduce the #ifdefs needed in drivers.
*
* Note that the DRM_FORMAT_BIG_ENDIAN flag should only be used in
* case the format can't be specified otherwise, so we don't end up
* with two values describing the same format.
*/
#ifdef __BIG_ENDIAN
# define DRM_FORMAT_HOST_XRGB1555 (DRM_FORMAT_XRGB1555 | \
DRM_FORMAT_BIG_ENDIAN)
# define DRM_FORMAT_HOST_RGB565 (DRM_FORMAT_RGB565 | \
DRM_FORMAT_BIG_ENDIAN)
# define DRM_FORMAT_HOST_XRGB8888 DRM_FORMAT_BGRX8888
# define DRM_FORMAT_HOST_ARGB8888 DRM_FORMAT_BGRA8888
#else
# define DRM_FORMAT_HOST_XRGB1555 DRM_FORMAT_XRGB1555
# define DRM_FORMAT_HOST_RGB565 DRM_FORMAT_RGB565
# define DRM_FORMAT_HOST_XRGB8888 DRM_FORMAT_XRGB8888
# define DRM_FORMAT_HOST_ARGB8888 DRM_FORMAT_ARGB8888
#endif
struct drm_device;
struct drm_mode_fb_cmd2;
/**
* struct drm_format_info - information about a DRM format
*/
struct drm_format_info {
/** @format: 4CC format identifier (DRM_FORMAT_*) */
u32 format;
/**
* @depth:
*
* Color depth (number of bits per pixel excluding padding bits),
* valid for a subset of RGB formats only. This is a legacy field, do
* not use in new code and set to 0 for new formats.
*/
u8 depth;
/** @num_planes: Number of color planes (1 to 3) */
u8 num_planes;
union {
/**
* @cpp:
*
* Number of bytes per pixel (per plane), this is aliased with
* @char_per_block. It is deprecated in favour of using the
* triplet @char_per_block, @block_w, @block_h for better
* describing the pixel format.
*/
u8 cpp[3];
/**
* @char_per_block:
*
* Number of bytes per block (per plane), where blocks are
* defined as a rectangle of pixels which are stored next to
* each other in a byte aligned memory region. Together with
* @block_w and @block_h this is used to properly describe tiles
* in tiled formats or to describe groups of pixels in packed
* formats for which the memory needed for a single pixel is not
* byte aligned.
*
* @cpp has been kept for historical reasons because there are
* a lot of places in drivers where it's used. In drm core for
* generic code paths the preferred way is to use
* @char_per_block, drm_format_info_block_width() and
* drm_format_info_block_height() which allows handling both
* block and non-block formats in the same way.
*
* For formats that are intended to be used only with non-linear
* modifiers both @cpp and @char_per_block must be 0 in the
* generic format table. Drivers could supply accurate
* information from their drm_mode_config.get_format_info hook
* if they want the core to be validating the pitch.
*/
u8 char_per_block[3];
};
/**
* @block_w:
*
* Block width in pixels, this is intended to be accessed through
* drm_format_info_block_width()
*/
u8 block_w[3];
/**
* @block_h:
*
* Block height in pixels, this is intended to be accessed through
* drm_format_info_block_height()
*/
u8 block_h[3];
/** @hsub: Horizontal chroma subsampling factor */
u8 hsub;
/** @vsub: Vertical chroma subsampling factor */
u8 vsub;
/** @has_alpha: Does the format embeds an alpha component? */
bool has_alpha;
/** @is_yuv: Is it a YUV format? */
bool is_yuv;
};
/**
* struct drm_format_name_buf - name of a DRM format
* @str: string buffer containing the format name
*/
struct drm_format_name_buf {
char str[32];
};
/**
* drm_format_info_is_yuv_packed - check that the format info matches a YUV
* format with data laid in a single plane
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a packed YUV format.
*/
static inline bool
drm_format_info_is_yuv_packed(const struct drm_format_info *info)
{
return info->is_yuv && info->num_planes == 1;
}
/**
* drm_format_info_is_yuv_semiplanar - check that the format info matches a YUV
* format with data laid in two planes (luminance and chrominance)
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a semiplanar YUV format.
*/
static inline bool
drm_format_info_is_yuv_semiplanar(const struct drm_format_info *info)
{
return info->is_yuv && info->num_planes == 2;
}
/**
* drm_format_info_is_yuv_planar - check that the format info matches a YUV
* format with data laid in three planes (one for each YUV component)
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a planar YUV format.
*/
static inline bool
drm_format_info_is_yuv_planar(const struct drm_format_info *info)
{
return info->is_yuv && info->num_planes == 3;
}
/**
* drm_format_info_is_yuv_sampling_410 - check that the format info matches a
* YUV format with 4:1:0 sub-sampling
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a YUV format with 4:1:0
* sub-sampling.
*/
static inline bool
drm_format_info_is_yuv_sampling_410(const struct drm_format_info *info)
{
return info->is_yuv && info->hsub == 4 && info->vsub == 4;
}
/**
* drm_format_info_is_yuv_sampling_411 - check that the format info matches a
* YUV format with 4:1:1 sub-sampling
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a YUV format with 4:1:1
* sub-sampling.
*/
static inline bool
drm_format_info_is_yuv_sampling_411(const struct drm_format_info *info)
{
return info->is_yuv && info->hsub == 4 && info->vsub == 1;
}
/**
* drm_format_info_is_yuv_sampling_420 - check that the format info matches a
* YUV format with 4:2:0 sub-sampling
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a YUV format with 4:2:0
* sub-sampling.
*/
static inline bool
drm_format_info_is_yuv_sampling_420(const struct drm_format_info *info)
{
return info->is_yuv && info->hsub == 2 && info->vsub == 2;
}
/**
* drm_format_info_is_yuv_sampling_422 - check that the format info matches a
* YUV format with 4:2:2 sub-sampling
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a YUV format with 4:2:2
* sub-sampling.
*/
static inline bool
drm_format_info_is_yuv_sampling_422(const struct drm_format_info *info)
{
return info->is_yuv && info->hsub == 2 && info->vsub == 1;
}
/**
* drm_format_info_is_yuv_sampling_444 - check that the format info matches a
* YUV format with 4:4:4 sub-sampling
* @info: format info
*
* Returns:
* A boolean indicating whether the format info matches a YUV format with 4:4:4
* sub-sampling.
*/
static inline bool
drm_format_info_is_yuv_sampling_444(const struct drm_format_info *info)
{
return info->is_yuv && info->hsub == 1 && info->vsub == 1;
}
/**
* drm_format_info_plane_width - width of the plane given the first plane
* @info: pixel format info
* @width: width of the first plane
* @plane: plane index
*
* Returns:
* The width of @plane, given that the width of the first plane is @width.
*/
static inline
int drm_format_info_plane_width(const struct drm_format_info *info, int width,
int plane)
{
if (!info || plane >= info->num_planes)
return 0;
if (plane == 0)
return width;
return width / info->hsub;
}
/**
* drm_format_info_plane_height - height of the plane given the first plane
* @info: pixel format info
* @height: height of the first plane
* @plane: plane index
*
* Returns:
* The height of @plane, given that the height of the first plane is @height.
*/
static inline
int drm_format_info_plane_height(const struct drm_format_info *info, int height,
int plane)
{
if (!info || plane >= info->num_planes)
return 0;
if (plane == 0)
return height;
return height / info->vsub;
}
const struct drm_format_info *__drm_format_info(u32 format);
const struct drm_format_info *drm_format_info(u32 format);
const struct drm_format_info *
drm_get_format_info(struct drm_device *dev,
const struct drm_mode_fb_cmd2 *mode_cmd);
uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth);
uint32_t drm_driver_legacy_fb_format(struct drm_device *dev,
uint32_t bpp, uint32_t depth);
unsigned int drm_format_info_block_width(const struct drm_format_info *info,
int plane);
unsigned int drm_format_info_block_height(const struct drm_format_info *info,
int plane);
uint64_t drm_format_info_min_pitch(const struct drm_format_info *info,
int plane, unsigned int buffer_width);
const char *drm_get_format_name(uint32_t format, struct drm_format_name_buf *buf);
#endif /* __DRM_FOURCC_H__ */