| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * i740fb - framebuffer driver for Intel740 |
| * Copyright (c) 2011 Ondrej Zary |
| * |
| * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru> |
| * which was partially based on: |
| * VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org> |
| * and Petr Vandrovec <VANDROVE@vc.cvut.cz> |
| * i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park, |
| * Texas. |
| * i740fb by Patrick LERDA, v0.9 |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| #include <linux/console.h> |
| #include <video/vga.h> |
| |
| #include "i740_reg.h" |
| |
| static char *mode_option; |
| static int mtrr = 1; |
| |
| struct i740fb_par { |
| unsigned char __iomem *regs; |
| bool has_sgram; |
| int wc_cookie; |
| bool ddc_registered; |
| struct i2c_adapter ddc_adapter; |
| struct i2c_algo_bit_data ddc_algo; |
| u32 pseudo_palette[16]; |
| struct mutex open_lock; |
| unsigned int ref_count; |
| |
| u8 crtc[VGA_CRT_C]; |
| u8 atc[VGA_ATT_C]; |
| u8 gdc[VGA_GFX_C]; |
| u8 seq[VGA_SEQ_C]; |
| u8 misc; |
| u8 vss; |
| |
| /* i740 specific registers */ |
| u8 display_cntl; |
| u8 pixelpipe_cfg0; |
| u8 pixelpipe_cfg1; |
| u8 pixelpipe_cfg2; |
| u8 video_clk2_m; |
| u8 video_clk2_n; |
| u8 video_clk2_mn_msbs; |
| u8 video_clk2_div_sel; |
| u8 pll_cntl; |
| u8 address_mapping; |
| u8 io_cntl; |
| u8 bitblt_cntl; |
| u8 ext_vert_total; |
| u8 ext_vert_disp_end; |
| u8 ext_vert_sync_start; |
| u8 ext_vert_blank_start; |
| u8 ext_horiz_total; |
| u8 ext_horiz_blank; |
| u8 ext_offset; |
| u8 interlace_cntl; |
| u32 lmi_fifo_watermark; |
| u8 ext_start_addr; |
| u8 ext_start_addr_hi; |
| }; |
| |
| #define DACSPEED8 203 |
| #define DACSPEED16 163 |
| #define DACSPEED24_SG 136 |
| #define DACSPEED24_SD 128 |
| #define DACSPEED32 86 |
| |
| static const struct fb_fix_screeninfo i740fb_fix = { |
| .id = "i740fb", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_TRUECOLOR, |
| .xpanstep = 8, |
| .ypanstep = 1, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static inline void i740outb(struct i740fb_par *par, u16 port, u8 val) |
| { |
| vga_mm_w(par->regs, port, val); |
| } |
| static inline u8 i740inb(struct i740fb_par *par, u16 port) |
| { |
| return vga_mm_r(par->regs, port); |
| } |
| static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val) |
| { |
| vga_mm_w_fast(par->regs, port, reg, val); |
| } |
| static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg) |
| { |
| vga_mm_w(par->regs, port, reg); |
| return vga_mm_r(par->regs, port+1); |
| } |
| static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg, |
| u8 val, u8 mask) |
| { |
| vga_mm_w_fast(par->regs, port, reg, (val & mask) |
| | (i740inreg(par, port, reg) & ~mask)); |
| } |
| |
| #define REG_DDC_DRIVE 0x62 |
| #define REG_DDC_STATE 0x63 |
| #define DDC_SCL (1 << 3) |
| #define DDC_SDA (1 << 2) |
| |
| static void i740fb_ddc_setscl(void *data, int val) |
| { |
| struct i740fb_par *par = data; |
| |
| i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL); |
| i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL); |
| } |
| |
| static void i740fb_ddc_setsda(void *data, int val) |
| { |
| struct i740fb_par *par = data; |
| |
| i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA); |
| i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA); |
| } |
| |
| static int i740fb_ddc_getscl(void *data) |
| { |
| struct i740fb_par *par = data; |
| |
| i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL); |
| |
| return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL); |
| } |
| |
| static int i740fb_ddc_getsda(void *data) |
| { |
| struct i740fb_par *par = data; |
| |
| i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA); |
| |
| return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA); |
| } |
| |
| static int i740fb_setup_ddc_bus(struct fb_info *info) |
| { |
| struct i740fb_par *par = info->par; |
| |
| strlcpy(par->ddc_adapter.name, info->fix.id, |
| sizeof(par->ddc_adapter.name)); |
| par->ddc_adapter.owner = THIS_MODULE; |
| par->ddc_adapter.class = I2C_CLASS_DDC; |
| par->ddc_adapter.algo_data = &par->ddc_algo; |
| par->ddc_adapter.dev.parent = info->device; |
| par->ddc_algo.setsda = i740fb_ddc_setsda; |
| par->ddc_algo.setscl = i740fb_ddc_setscl; |
| par->ddc_algo.getsda = i740fb_ddc_getsda; |
| par->ddc_algo.getscl = i740fb_ddc_getscl; |
| par->ddc_algo.udelay = 10; |
| par->ddc_algo.timeout = 20; |
| par->ddc_algo.data = par; |
| |
| i2c_set_adapdata(&par->ddc_adapter, par); |
| |
| return i2c_bit_add_bus(&par->ddc_adapter); |
| } |
| |
| static int i740fb_open(struct fb_info *info, int user) |
| { |
| struct i740fb_par *par = info->par; |
| |
| mutex_lock(&(par->open_lock)); |
| par->ref_count++; |
| mutex_unlock(&(par->open_lock)); |
| |
| return 0; |
| } |
| |
| static int i740fb_release(struct fb_info *info, int user) |
| { |
| struct i740fb_par *par = info->par; |
| |
| mutex_lock(&(par->open_lock)); |
| if (par->ref_count == 0) { |
| fb_err(info, "release called with zero refcount\n"); |
| mutex_unlock(&(par->open_lock)); |
| return -EINVAL; |
| } |
| |
| par->ref_count--; |
| mutex_unlock(&(par->open_lock)); |
| |
| return 0; |
| } |
| |
| static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp) |
| { |
| /* |
| * Would like to calculate these values automatically, but a generic |
| * algorithm does not seem possible. Note: These FIFO water mark |
| * values were tested on several cards and seem to eliminate the |
| * all of the snow and vertical banding, but fine adjustments will |
| * probably be required for other cards. |
| */ |
| |
| u32 wm; |
| |
| switch (bpp) { |
| case 8: |
| if (freq > 200) |
| wm = 0x18120000; |
| else if (freq > 175) |
| wm = 0x16110000; |
| else if (freq > 135) |
| wm = 0x120E0000; |
| else |
| wm = 0x100D0000; |
| break; |
| case 15: |
| case 16: |
| if (par->has_sgram) { |
| if (freq > 140) |
| wm = 0x2C1D0000; |
| else if (freq > 120) |
| wm = 0x2C180000; |
| else if (freq > 100) |
| wm = 0x24160000; |
| else if (freq > 90) |
| wm = 0x18120000; |
| else if (freq > 50) |
| wm = 0x16110000; |
| else if (freq > 32) |
| wm = 0x13100000; |
| else |
| wm = 0x120E0000; |
| } else { |
| if (freq > 160) |
| wm = 0x28200000; |
| else if (freq > 140) |
| wm = 0x2A1E0000; |
| else if (freq > 130) |
| wm = 0x2B1A0000; |
| else if (freq > 120) |
| wm = 0x2C180000; |
| else if (freq > 100) |
| wm = 0x24180000; |
| else if (freq > 90) |
| wm = 0x18120000; |
| else if (freq > 50) |
| wm = 0x16110000; |
| else if (freq > 32) |
| wm = 0x13100000; |
| else |
| wm = 0x120E0000; |
| } |
| break; |
| case 24: |
| if (par->has_sgram) { |
| if (freq > 130) |
| wm = 0x31200000; |
| else if (freq > 120) |
| wm = 0x2E200000; |
| else if (freq > 100) |
| wm = 0x2C1D0000; |
| else if (freq > 80) |
| wm = 0x25180000; |
| else if (freq > 64) |
| wm = 0x24160000; |
| else if (freq > 49) |
| wm = 0x18120000; |
| else if (freq > 32) |
| wm = 0x16110000; |
| else |
| wm = 0x13100000; |
| } else { |
| if (freq > 120) |
| wm = 0x311F0000; |
| else if (freq > 100) |
| wm = 0x2C1D0000; |
| else if (freq > 80) |
| wm = 0x25180000; |
| else if (freq > 64) |
| wm = 0x24160000; |
| else if (freq > 49) |
| wm = 0x18120000; |
| else if (freq > 32) |
| wm = 0x16110000; |
| else |
| wm = 0x13100000; |
| } |
| break; |
| case 32: |
| if (par->has_sgram) { |
| if (freq > 80) |
| wm = 0x2A200000; |
| else if (freq > 60) |
| wm = 0x281A0000; |
| else if (freq > 49) |
| wm = 0x25180000; |
| else if (freq > 32) |
| wm = 0x18120000; |
| else |
| wm = 0x16110000; |
| } else { |
| if (freq > 80) |
| wm = 0x29200000; |
| else if (freq > 60) |
| wm = 0x281A0000; |
| else if (freq > 49) |
| wm = 0x25180000; |
| else if (freq > 32) |
| wm = 0x18120000; |
| else |
| wm = 0x16110000; |
| } |
| break; |
| } |
| |
| return wm; |
| } |
| |
| /* clock calculation from i740fb by Patrick LERDA */ |
| |
| #define I740_RFREQ 1000000 |
| #define TARGET_MAX_N 30 |
| #define I740_FFIX (1 << 8) |
| #define I740_RFREQ_FIX (I740_RFREQ / I740_FFIX) |
| #define I740_REF_FREQ (6667 * I740_FFIX / 100) /* 66.67 MHz */ |
| #define I740_MAX_VCO_FREQ (450 * I740_FFIX) /* 450 MHz */ |
| |
| static void i740_calc_vclk(u32 freq, struct i740fb_par *par) |
| { |
| const u32 err_max = freq / (200 * I740_RFREQ / I740_FFIX); |
| const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX); |
| u32 err_best = 512 * I740_FFIX; |
| u32 f_err, f_vco; |
| int m_best = 0, n_best = 0, p_best = 0; |
| int m, n; |
| |
| p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); |
| f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX; |
| freq = freq / I740_RFREQ_FIX; |
| |
| n = 2; |
| do { |
| n++; |
| m = ((f_vco * n) / I740_REF_FREQ + 2) / 4; |
| |
| if (m < 3) |
| m = 3; |
| |
| { |
| u32 f_out = (((m * I740_REF_FREQ * 4) |
| / n) + ((1 << p_best) / 2)) / (1 << p_best); |
| |
| f_err = (freq - f_out); |
| |
| if (abs(f_err) < err_max) { |
| m_best = m; |
| n_best = n; |
| err_best = f_err; |
| } |
| } |
| } while ((abs(f_err) >= err_target) && |
| ((n <= TARGET_MAX_N) || (abs(err_best) > err_max))); |
| |
| if (abs(f_err) < err_target) { |
| m_best = m; |
| n_best = n; |
| } |
| |
| par->video_clk2_m = (m_best - 2) & 0xFF; |
| par->video_clk2_n = (n_best - 2) & 0xFF; |
| par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS) |
| | (((m_best - 2) >> 8) & VCO_M_MSBS)); |
| par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1); |
| } |
| |
| static int i740fb_decode_var(const struct fb_var_screeninfo *var, |
| struct i740fb_par *par, struct fb_info *info) |
| { |
| /* |
| * Get the video params out of 'var'. |
| * If a value doesn't fit, round it up, if it's too big, return -EINVAL. |
| */ |
| |
| u32 xres, right, hslen, left, xtotal; |
| u32 yres, lower, vslen, upper, ytotal; |
| u32 vxres, xoffset, vyres, yoffset; |
| u32 bpp, base, dacspeed24, mem; |
| u8 r7; |
| int i; |
| |
| dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n", |
| var->xres, var->yres, var->xres_virtual, var->xres_virtual); |
| dev_dbg(info->device, " xoff: %i, yoff: %i, bpp: %i, graysc: %i\n", |
| var->xoffset, var->yoffset, var->bits_per_pixel, |
| var->grayscale); |
| dev_dbg(info->device, " activate: %i, nonstd: %i, vmode: %i\n", |
| var->activate, var->nonstd, var->vmode); |
| dev_dbg(info->device, " pixclock: %i, hsynclen:%i, vsynclen:%i\n", |
| var->pixclock, var->hsync_len, var->vsync_len); |
| dev_dbg(info->device, " left: %i, right: %i, up:%i, lower:%i\n", |
| var->left_margin, var->right_margin, var->upper_margin, |
| var->lower_margin); |
| |
| |
| bpp = var->bits_per_pixel; |
| switch (bpp) { |
| case 1 ... 8: |
| bpp = 8; |
| if ((1000000 / var->pixclock) > DACSPEED8) { |
| dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n", |
| 1000000 / var->pixclock, DACSPEED8); |
| return -EINVAL; |
| } |
| break; |
| case 9 ... 15: |
| bpp = 15; |
| /* fall through */ |
| case 16: |
| if ((1000000 / var->pixclock) > DACSPEED16) { |
| dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n", |
| 1000000 / var->pixclock, DACSPEED16); |
| return -EINVAL; |
| } |
| break; |
| case 17 ... 24: |
| bpp = 24; |
| dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD; |
| if ((1000000 / var->pixclock) > dacspeed24) { |
| dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n", |
| 1000000 / var->pixclock, dacspeed24); |
| return -EINVAL; |
| } |
| break; |
| case 25 ... 32: |
| bpp = 32; |
| if ((1000000 / var->pixclock) > DACSPEED32) { |
| dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n", |
| 1000000 / var->pixclock, DACSPEED32); |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| xres = ALIGN(var->xres, 8); |
| vxres = ALIGN(var->xres_virtual, 16); |
| if (vxres < xres) |
| vxres = xres; |
| |
| xoffset = ALIGN(var->xoffset, 8); |
| if (xres + xoffset > vxres) |
| xoffset = vxres - xres; |
| |
| left = ALIGN(var->left_margin, 8); |
| right = ALIGN(var->right_margin, 8); |
| hslen = ALIGN(var->hsync_len, 8); |
| |
| yres = var->yres; |
| vyres = var->yres_virtual; |
| if (yres > vyres) |
| vyres = yres; |
| |
| yoffset = var->yoffset; |
| if (yres + yoffset > vyres) |
| yoffset = vyres - yres; |
| |
| lower = var->lower_margin; |
| vslen = var->vsync_len; |
| upper = var->upper_margin; |
| |
| mem = vxres * vyres * ((bpp + 1) / 8); |
| if (mem > info->screen_size) { |
| dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n", |
| mem >> 10, info->screen_size >> 10); |
| return -ENOMEM; |
| } |
| |
| if (yoffset + yres > vyres) |
| yoffset = vyres - yres; |
| |
| xtotal = xres + right + hslen + left; |
| ytotal = yres + lower + vslen + upper; |
| |
| par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5; |
| par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1; |
| par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1; |
| par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3; |
| par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F) |
| | ((((xres + right + hslen) >> 3) & 0x20) << 2); |
| par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F) |
| | 0x80; |
| |
| par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2; |
| |
| r7 = 0x10; /* disable linecompare */ |
| if (ytotal & 0x100) |
| r7 |= 0x01; |
| if (ytotal & 0x200) |
| r7 |= 0x20; |
| |
| par->crtc[VGA_CRTC_PRESET_ROW] = 0; |
| par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */ |
| if (var->vmode & FB_VMODE_DOUBLE) |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80; |
| par->crtc[VGA_CRTC_CURSOR_START] = 0x00; |
| par->crtc[VGA_CRTC_CURSOR_END] = 0x00; |
| par->crtc[VGA_CRTC_CURSOR_HI] = 0x00; |
| par->crtc[VGA_CRTC_CURSOR_LO] = 0x00; |
| par->crtc[VGA_CRTC_V_DISP_END] = yres-1; |
| if ((yres-1) & 0x100) |
| r7 |= 0x02; |
| if ((yres-1) & 0x200) |
| r7 |= 0x40; |
| |
| par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1; |
| par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1; |
| if ((yres + lower - 1) & 0x100) |
| r7 |= 0x0C; |
| if ((yres + lower - 1) & 0x200) { |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20; |
| r7 |= 0x80; |
| } |
| |
| /* disabled IRQ */ |
| par->crtc[VGA_CRTC_V_SYNC_END] = |
| ((yres + lower - 1 + vslen) & 0x0F) & ~0x10; |
| /* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */ |
| par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF; |
| |
| par->crtc[VGA_CRTC_UNDERLINE] = 0x00; |
| par->crtc[VGA_CRTC_MODE] = 0xC3 ; |
| par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF; |
| par->crtc[VGA_CRTC_OVERFLOW] = r7; |
| |
| par->vss = 0x00; /* 3DA */ |
| |
| for (i = 0x00; i < 0x10; i++) |
| par->atc[i] = i; |
| par->atc[VGA_ATC_MODE] = 0x81; |
| par->atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */ |
| par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F; |
| par->atc[VGA_ATC_COLOR_PAGE] = 0x00; |
| |
| par->misc = 0xC3; |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| par->misc &= ~0x40; |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| par->misc &= ~0x80; |
| |
| par->seq[VGA_SEQ_CLOCK_MODE] = 0x01; |
| par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F; |
| par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00; |
| par->seq[VGA_SEQ_MEMORY_MODE] = 0x06; |
| |
| par->gdc[VGA_GFX_SR_VALUE] = 0x00; |
| par->gdc[VGA_GFX_SR_ENABLE] = 0x00; |
| par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00; |
| par->gdc[VGA_GFX_DATA_ROTATE] = 0x00; |
| par->gdc[VGA_GFX_PLANE_READ] = 0; |
| par->gdc[VGA_GFX_MODE] = 0x02; |
| par->gdc[VGA_GFX_MISC] = 0x05; |
| par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F; |
| par->gdc[VGA_GFX_BIT_MASK] = 0xFF; |
| |
| base = (yoffset * vxres + (xoffset & ~7)) >> 2; |
| switch (bpp) { |
| case 8: |
| par->crtc[VGA_CRTC_OFFSET] = vxres >> 3; |
| par->ext_offset = vxres >> 11; |
| par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE; |
| par->bitblt_cntl = COLEXP_8BPP; |
| break; |
| case 15: /* 0rrrrrgg gggbbbbb */ |
| case 16: /* rrrrrggg gggbbbbb */ |
| par->pixelpipe_cfg1 = (var->green.length == 6) ? |
| DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE; |
| par->crtc[VGA_CRTC_OFFSET] = vxres >> 2; |
| par->ext_offset = vxres >> 10; |
| par->bitblt_cntl = COLEXP_16BPP; |
| base *= 2; |
| break; |
| case 24: |
| par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3; |
| par->ext_offset = (vxres * 3) >> 11; |
| par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE; |
| par->bitblt_cntl = COLEXP_24BPP; |
| base &= 0xFFFFFFFE; /* ...ignore the last bit. */ |
| base *= 3; |
| break; |
| case 32: |
| par->crtc[VGA_CRTC_OFFSET] = vxres >> 1; |
| par->ext_offset = vxres >> 9; |
| par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE; |
| par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */ |
| base *= 4; |
| break; |
| } |
| |
| par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; |
| par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; |
| par->ext_start_addr = |
| ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; |
| par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; |
| |
| par->pixelpipe_cfg0 = DAC_8_BIT; |
| |
| par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE; |
| par->io_cntl = EXTENDED_CRTC_CNTL; |
| par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE; |
| par->display_cntl = HIRES_MODE; |
| |
| /* Set the MCLK freq */ |
| par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */ |
| |
| /* Calculate the extended CRTC regs */ |
| par->ext_vert_total = (ytotal - 2) >> 8; |
| par->ext_vert_disp_end = (yres - 1) >> 8; |
| par->ext_vert_sync_start = (yres + lower) >> 8; |
| par->ext_vert_blank_start = (yres + lower) >> 8; |
| par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8; |
| par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6; |
| |
| par->interlace_cntl = INTERLACE_DISABLE; |
| |
| /* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */ |
| par->atc[VGA_ATC_OVERSCAN] = 0; |
| |
| /* Calculate VCLK that most closely matches the requested dot clock */ |
| i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par); |
| |
| /* Since we program the clocks ourselves, always use VCLK2. */ |
| par->misc |= 0x0C; |
| |
| /* Calculate the FIFO Watermark and Burst Length. */ |
| par->lmi_fifo_watermark = |
| i740_calc_fifo(par, 1000000 / var->pixclock, bpp); |
| |
| return 0; |
| } |
| |
| static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| switch (var->bits_per_pixel) { |
| case 8: |
| var->red.offset = var->green.offset = var->blue.offset = 0; |
| var->red.length = var->green.length = var->blue.length = 8; |
| break; |
| case 16: |
| switch (var->green.length) { |
| default: |
| case 5: |
| var->red.offset = 10; |
| var->green.offset = 5; |
| var->blue.offset = 0; |
| var->red.length = 5; |
| var->green.length = 5; |
| var->blue.length = 5; |
| break; |
| case 6: |
| var->red.offset = 11; |
| var->green.offset = 5; |
| var->blue.offset = 0; |
| var->red.length = var->blue.length = 5; |
| break; |
| } |
| break; |
| case 24: |
| var->red.offset = 16; |
| var->green.offset = 8; |
| var->blue.offset = 0; |
| var->red.length = var->green.length = var->blue.length = 8; |
| break; |
| case 32: |
| var->transp.offset = 24; |
| var->red.offset = 16; |
| var->green.offset = 8; |
| var->blue.offset = 0; |
| var->transp.length = 8; |
| var->red.length = var->green.length = var->blue.length = 8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (var->xres > var->xres_virtual) |
| var->xres_virtual = var->xres; |
| |
| if (var->yres > var->yres_virtual) |
| var->yres_virtual = var->yres; |
| |
| if (info->monspecs.hfmax && info->monspecs.vfmax && |
| info->monspecs.dclkmax && fb_validate_mode(var, info) < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void vga_protect(struct i740fb_par *par) |
| { |
| /* disable the display */ |
| i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20); |
| |
| i740inb(par, 0x3DA); |
| i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */ |
| } |
| |
| static void vga_unprotect(struct i740fb_par *par) |
| { |
| /* reenable display */ |
| i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20); |
| |
| i740inb(par, 0x3DA); |
| i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */ |
| } |
| |
| static int i740fb_set_par(struct fb_info *info) |
| { |
| struct i740fb_par *par = info->par; |
| u32 itemp; |
| int i; |
| |
| i = i740fb_decode_var(&info->var, par, info); |
| if (i) |
| return i; |
| |
| memset(info->screen_base, 0, info->screen_size); |
| |
| vga_protect(par); |
| |
| i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE); |
| |
| mdelay(1); |
| |
| i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m); |
| i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n); |
| i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs); |
| i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel); |
| |
| i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, |
| par->pixelpipe_cfg0 & DAC_8_BIT, 0x80); |
| |
| i740inb(par, 0x3DA); |
| i740outb(par, 0x3C0, 0x00); |
| |
| /* update misc output register */ |
| i740outb(par, VGA_MIS_W, par->misc | 0x01); |
| |
| /* synchronous reset on */ |
| i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01); |
| /* write sequencer registers */ |
| i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, |
| par->seq[VGA_SEQ_CLOCK_MODE] | 0x20); |
| for (i = 2; i < VGA_SEQ_C; i++) |
| i740outreg(par, VGA_SEQ_I, i, par->seq[i]); |
| |
| /* synchronous reset off */ |
| i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03); |
| |
| /* deprotect CRT registers 0-7 */ |
| i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END, |
| par->crtc[VGA_CRTC_V_SYNC_END]); |
| |
| /* write CRT registers */ |
| for (i = 0; i < VGA_CRT_C; i++) |
| i740outreg(par, VGA_CRT_IC, i, par->crtc[i]); |
| |
| /* write graphics controller registers */ |
| for (i = 0; i < VGA_GFX_C; i++) |
| i740outreg(par, VGA_GFX_I, i, par->gdc[i]); |
| |
| /* write attribute controller registers */ |
| for (i = 0; i < VGA_ATT_C; i++) { |
| i740inb(par, VGA_IS1_RC); /* reset flip-flop */ |
| i740outb(par, VGA_ATT_IW, i); |
| i740outb(par, VGA_ATT_IW, par->atc[i]); |
| } |
| |
| i740inb(par, VGA_IS1_RC); |
| i740outb(par, VGA_ATT_IW, 0x20); |
| |
| i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total); |
| i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end); |
| i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START, |
| par->ext_vert_sync_start); |
| i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START, |
| par->ext_vert_blank_start); |
| i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total); |
| i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank); |
| i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset); |
| i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi); |
| i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr); |
| |
| i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL, |
| par->interlace_cntl, INTERLACE_ENABLE); |
| i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F); |
| i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE); |
| i740outreg_mask(par, XRX, DISPLAY_CNTL, |
| par->display_cntl, VGA_WRAP_MODE | GUI_MODE); |
| i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B); |
| i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C); |
| |
| i740outreg(par, XRX, PLL_CNTL, par->pll_cntl); |
| |
| i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1, |
| par->pixelpipe_cfg1, DISPLAY_COLOR_MODE); |
| |
| itemp = readl(par->regs + FWATER_BLC); |
| itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK); |
| itemp |= par->lmi_fifo_watermark; |
| writel(itemp, par->regs + FWATER_BLC); |
| |
| i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ); |
| |
| i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY); |
| i740outreg_mask(par, XRX, IO_CTNL, |
| par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL); |
| |
| if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) { |
| i740outb(par, VGA_PEL_MSK, 0xFF); |
| i740outb(par, VGA_PEL_IW, 0x00); |
| for (i = 0; i < 256; i++) { |
| itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2; |
| i740outb(par, VGA_PEL_D, itemp); |
| i740outb(par, VGA_PEL_D, itemp); |
| i740outb(par, VGA_PEL_D, itemp); |
| } |
| } |
| |
| /* Wait for screen to stabilize. */ |
| mdelay(50); |
| vga_unprotect(par); |
| |
| info->fix.line_length = |
| info->var.xres_virtual * info->var.bits_per_pixel / 8; |
| if (info->var.bits_per_pixel == 8) |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| else |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| |
| return 0; |
| } |
| |
| static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| u32 r, g, b; |
| |
| dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n", |
| regno, red, green, blue, transp, info->var.bits_per_pixel); |
| |
| switch (info->fix.visual) { |
| case FB_VISUAL_PSEUDOCOLOR: |
| if (regno >= 256) |
| return -EINVAL; |
| i740outb(info->par, VGA_PEL_IW, regno); |
| i740outb(info->par, VGA_PEL_D, red >> 8); |
| i740outb(info->par, VGA_PEL_D, green >> 8); |
| i740outb(info->par, VGA_PEL_D, blue >> 8); |
| break; |
| case FB_VISUAL_TRUECOLOR: |
| if (regno >= 16) |
| return -EINVAL; |
| r = (red >> (16 - info->var.red.length)) |
| << info->var.red.offset; |
| b = (blue >> (16 - info->var.blue.length)) |
| << info->var.blue.offset; |
| g = (green >> (16 - info->var.green.length)) |
| << info->var.green.offset; |
| ((u32 *) info->pseudo_palette)[regno] = r | g | b; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int i740fb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct i740fb_par *par = info->par; |
| u32 base = (var->yoffset * info->var.xres_virtual |
| + (var->xoffset & ~7)) >> 2; |
| |
| dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n", |
| var->xoffset, var->yoffset, base); |
| |
| switch (info->var.bits_per_pixel) { |
| case 8: |
| break; |
| case 15: |
| case 16: |
| base *= 2; |
| break; |
| case 24: |
| /* |
| * The last bit does not seem to have any effect on the start |
| * address register in 24bpp mode, so... |
| */ |
| base &= 0xFFFFFFFE; /* ...ignore the last bit. */ |
| base *= 3; |
| break; |
| case 32: |
| base *= 4; |
| break; |
| } |
| |
| par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; |
| par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; |
| par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; |
| par->ext_start_addr = |
| ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; |
| |
| i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO, base & 0x000000FF); |
| i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI, |
| (base & 0x0000FF00) >> 8); |
| i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, |
| (base & 0x3FC00000) >> 22); |
| i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, |
| ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE); |
| |
| return 0; |
| } |
| |
| static int i740fb_blank(int blank_mode, struct fb_info *info) |
| { |
| struct i740fb_par *par = info->par; |
| |
| unsigned char SEQ01; |
| int DPMSSyncSelect; |
| |
| switch (blank_mode) { |
| case FB_BLANK_UNBLANK: |
| case FB_BLANK_NORMAL: |
| SEQ01 = 0x00; |
| DPMSSyncSelect = HSYNC_ON | VSYNC_ON; |
| break; |
| case FB_BLANK_VSYNC_SUSPEND: |
| SEQ01 = 0x20; |
| DPMSSyncSelect = HSYNC_ON | VSYNC_OFF; |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| SEQ01 = 0x20; |
| DPMSSyncSelect = HSYNC_OFF | VSYNC_ON; |
| break; |
| case FB_BLANK_POWERDOWN: |
| SEQ01 = 0x20; |
| DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF; |
| break; |
| default: |
| return -EINVAL; |
| } |
| /* Turn the screen on/off */ |
| i740outb(par, SRX, 0x01); |
| SEQ01 |= i740inb(par, SRX + 1) & ~0x20; |
| i740outb(par, SRX, 0x01); |
| i740outb(par, SRX + 1, SEQ01); |
| |
| /* Set the DPMS mode */ |
| i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect); |
| |
| /* Let fbcon do a soft blank for us */ |
| return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; |
| } |
| |
| static struct fb_ops i740fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = i740fb_open, |
| .fb_release = i740fb_release, |
| .fb_check_var = i740fb_check_var, |
| .fb_set_par = i740fb_set_par, |
| .fb_setcolreg = i740fb_setcolreg, |
| .fb_blank = i740fb_blank, |
| .fb_pan_display = i740fb_pan_display, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent) |
| { |
| struct fb_info *info; |
| struct i740fb_par *par; |
| int ret, tmp; |
| bool found = false; |
| u8 *edid; |
| |
| info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev)); |
| if (!info) |
| return -ENOMEM; |
| |
| par = info->par; |
| mutex_init(&par->open_lock); |
| |
| info->var.activate = FB_ACTIVATE_NOW; |
| info->var.bits_per_pixel = 8; |
| info->fbops = &i740fb_ops; |
| info->pseudo_palette = par->pseudo_palette; |
| |
| ret = pci_enable_device(dev); |
| if (ret) { |
| dev_err(info->device, "cannot enable PCI device\n"); |
| goto err_enable_device; |
| } |
| |
| ret = pci_request_regions(dev, info->fix.id); |
| if (ret) { |
| dev_err(info->device, "error requesting regions\n"); |
| goto err_request_regions; |
| } |
| |
| info->screen_base = pci_ioremap_wc_bar(dev, 0); |
| if (!info->screen_base) { |
| dev_err(info->device, "error remapping base\n"); |
| ret = -ENOMEM; |
| goto err_ioremap_1; |
| } |
| |
| par->regs = pci_ioremap_bar(dev, 1); |
| if (!par->regs) { |
| dev_err(info->device, "error remapping MMIO\n"); |
| ret = -ENOMEM; |
| goto err_ioremap_2; |
| } |
| |
| /* detect memory size */ |
| if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1) |
| == DRAM_ROW_1_SDRAM) |
| i740outb(par, XRX, DRAM_ROW_BNDRY_1); |
| else |
| i740outb(par, XRX, DRAM_ROW_BNDRY_0); |
| info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024; |
| /* detect memory type */ |
| tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO); |
| par->has_sgram = !((tmp & DRAM_RAS_TIMING) || |
| (tmp & DRAM_RAS_PRECHARGE)); |
| |
| fb_info(info, "Intel740 on %s, %ld KB %s\n", |
| pci_name(dev), info->screen_size >> 10, |
| par->has_sgram ? "SGRAM" : "SDRAM"); |
| |
| info->fix = i740fb_fix; |
| info->fix.mmio_start = pci_resource_start(dev, 1); |
| info->fix.mmio_len = pci_resource_len(dev, 1); |
| info->fix.smem_start = pci_resource_start(dev, 0); |
| info->fix.smem_len = info->screen_size; |
| info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; |
| |
| if (i740fb_setup_ddc_bus(info) == 0) { |
| par->ddc_registered = true; |
| edid = fb_ddc_read(&par->ddc_adapter); |
| if (edid) { |
| fb_edid_to_monspecs(edid, &info->monspecs); |
| kfree(edid); |
| if (!info->monspecs.modedb) |
| dev_err(info->device, |
| "error getting mode database\n"); |
| else { |
| const struct fb_videomode *m; |
| |
| fb_videomode_to_modelist( |
| info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| &info->modelist); |
| m = fb_find_best_display(&info->monspecs, |
| &info->modelist); |
| if (m) { |
| fb_videomode_to_var(&info->var, m); |
| /* fill all other info->var's fields */ |
| if (!i740fb_check_var(&info->var, info)) |
| found = true; |
| } |
| } |
| } |
| } |
| |
| if (!mode_option && !found) |
| mode_option = "640x480-8@60"; |
| |
| if (mode_option) { |
| ret = fb_find_mode(&info->var, info, mode_option, |
| info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| NULL, info->var.bits_per_pixel); |
| if (!ret || ret == 4) { |
| dev_err(info->device, "mode %s not found\n", |
| mode_option); |
| ret = -EINVAL; |
| } |
| } |
| |
| fb_destroy_modedb(info->monspecs.modedb); |
| info->monspecs.modedb = NULL; |
| |
| /* maximize virtual vertical size for fast scrolling */ |
| info->var.yres_virtual = info->fix.smem_len * 8 / |
| (info->var.bits_per_pixel * info->var.xres_virtual); |
| |
| if (ret == -EINVAL) |
| goto err_find_mode; |
| |
| ret = fb_alloc_cmap(&info->cmap, 256, 0); |
| if (ret) { |
| dev_err(info->device, "cannot allocate colormap\n"); |
| goto err_alloc_cmap; |
| } |
| |
| ret = register_framebuffer(info); |
| if (ret) { |
| dev_err(info->device, "error registering framebuffer\n"); |
| goto err_reg_framebuffer; |
| } |
| |
| fb_info(info, "%s frame buffer device\n", info->fix.id); |
| pci_set_drvdata(dev, info); |
| if (mtrr) |
| par->wc_cookie = arch_phys_wc_add(info->fix.smem_start, |
| info->fix.smem_len); |
| return 0; |
| |
| err_reg_framebuffer: |
| fb_dealloc_cmap(&info->cmap); |
| err_alloc_cmap: |
| err_find_mode: |
| if (par->ddc_registered) |
| i2c_del_adapter(&par->ddc_adapter); |
| pci_iounmap(dev, par->regs); |
| err_ioremap_2: |
| pci_iounmap(dev, info->screen_base); |
| err_ioremap_1: |
| pci_release_regions(dev); |
| err_request_regions: |
| /* pci_disable_device(dev); */ |
| err_enable_device: |
| framebuffer_release(info); |
| return ret; |
| } |
| |
| static void i740fb_remove(struct pci_dev *dev) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| |
| if (info) { |
| struct i740fb_par *par = info->par; |
| arch_phys_wc_del(par->wc_cookie); |
| unregister_framebuffer(info); |
| fb_dealloc_cmap(&info->cmap); |
| if (par->ddc_registered) |
| i2c_del_adapter(&par->ddc_adapter); |
| pci_iounmap(dev, par->regs); |
| pci_iounmap(dev, info->screen_base); |
| pci_release_regions(dev); |
| /* pci_disable_device(dev); */ |
| framebuffer_release(info); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| static int i740fb_suspend(struct pci_dev *dev, pm_message_t state) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| struct i740fb_par *par = info->par; |
| |
| /* don't disable console during hibernation and wakeup from it */ |
| if (state.event == PM_EVENT_FREEZE || state.event == PM_EVENT_PRETHAW) |
| return 0; |
| |
| console_lock(); |
| mutex_lock(&(par->open_lock)); |
| |
| /* do nothing if framebuffer is not active */ |
| if (par->ref_count == 0) { |
| mutex_unlock(&(par->open_lock)); |
| console_unlock(); |
| return 0; |
| } |
| |
| fb_set_suspend(info, 1); |
| |
| pci_save_state(dev); |
| pci_disable_device(dev); |
| pci_set_power_state(dev, pci_choose_state(dev, state)); |
| |
| mutex_unlock(&(par->open_lock)); |
| console_unlock(); |
| |
| return 0; |
| } |
| |
| static int i740fb_resume(struct pci_dev *dev) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| struct i740fb_par *par = info->par; |
| |
| console_lock(); |
| mutex_lock(&(par->open_lock)); |
| |
| if (par->ref_count == 0) |
| goto fail; |
| |
| pci_set_power_state(dev, PCI_D0); |
| pci_restore_state(dev); |
| if (pci_enable_device(dev)) |
| goto fail; |
| |
| i740fb_set_par(info); |
| fb_set_suspend(info, 0); |
| |
| fail: |
| mutex_unlock(&(par->open_lock)); |
| console_unlock(); |
| return 0; |
| } |
| #else |
| #define i740fb_suspend NULL |
| #define i740fb_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| #define I740_ID_PCI 0x00d1 |
| #define I740_ID_AGP 0x7800 |
| |
| static const struct pci_device_id i740fb_id_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) }, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, i740fb_id_table); |
| |
| static struct pci_driver i740fb_driver = { |
| .name = "i740fb", |
| .id_table = i740fb_id_table, |
| .probe = i740fb_probe, |
| .remove = i740fb_remove, |
| .suspend = i740fb_suspend, |
| .resume = i740fb_resume, |
| }; |
| |
| #ifndef MODULE |
| static int __init i740fb_setup(char *options) |
| { |
| char *opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((opt = strsep(&options, ",")) != NULL) { |
| if (!*opt) |
| continue; |
| else if (!strncmp(opt, "mtrr:", 5)) |
| mtrr = simple_strtoul(opt + 5, NULL, 0); |
| else |
| mode_option = opt; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int __init i740fb_init(void) |
| { |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("i740fb", &option)) |
| return -ENODEV; |
| i740fb_setup(option); |
| #endif |
| |
| return pci_register_driver(&i740fb_driver); |
| } |
| |
| static void __exit i740fb_exit(void) |
| { |
| pci_unregister_driver(&i740fb_driver); |
| } |
| |
| module_init(i740fb_init); |
| module_exit(i740fb_exit); |
| |
| MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("fbdev driver for Intel740"); |
| |
| module_param(mode_option, charp, 0444); |
| MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)"); |
| |
| module_param(mtrr, int, 0444); |
| MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)"); |