| /* |
| * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> |
| * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2006 Michael Buesch <m@bues.ch> |
| * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> |
| * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "bcm47xx_private.h" |
| |
| #include <linux/export.h> |
| #include <linux/types.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/phy_fixed.h> |
| #include <linux/ssb/ssb.h> |
| #include <linux/ssb/ssb_embedded.h> |
| #include <linux/bcma/bcma_soc.h> |
| #include <asm/bootinfo.h> |
| #include <asm/idle.h> |
| #include <asm/prom.h> |
| #include <asm/reboot.h> |
| #include <asm/time.h> |
| #include <bcm47xx.h> |
| #include <bcm47xx_nvram.h> |
| #include <bcm47xx_board.h> |
| |
| union bcm47xx_bus bcm47xx_bus; |
| EXPORT_SYMBOL(bcm47xx_bus); |
| |
| enum bcm47xx_bus_type bcm47xx_bus_type; |
| EXPORT_SYMBOL(bcm47xx_bus_type); |
| |
| static void bcm47xx_machine_restart(char *command) |
| { |
| printk(KERN_ALERT "Please stand by while rebooting the system...\n"); |
| local_irq_disable(); |
| /* Set the watchdog timer to reset immediately */ |
| switch (bcm47xx_bus_type) { |
| #ifdef CONFIG_BCM47XX_SSB |
| case BCM47XX_BUS_TYPE_SSB: |
| if (bcm47xx_bus.ssb.chip_id == 0x4785) |
| write_c0_diag4(1 << 22); |
| ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); |
| if (bcm47xx_bus.ssb.chip_id == 0x4785) { |
| __asm__ __volatile__( |
| ".set\tmips3\n\t" |
| "sync\n\t" |
| "wait\n\t" |
| ".set\tmips0"); |
| } |
| break; |
| #endif |
| #ifdef CONFIG_BCM47XX_BCMA |
| case BCM47XX_BUS_TYPE_BCMA: |
| bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); |
| break; |
| #endif |
| } |
| while (1) |
| cpu_relax(); |
| } |
| |
| static void bcm47xx_machine_halt(void) |
| { |
| /* Disable interrupts and watchdog and spin forever */ |
| local_irq_disable(); |
| switch (bcm47xx_bus_type) { |
| #ifdef CONFIG_BCM47XX_SSB |
| case BCM47XX_BUS_TYPE_SSB: |
| ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); |
| break; |
| #endif |
| #ifdef CONFIG_BCM47XX_BCMA |
| case BCM47XX_BUS_TYPE_BCMA: |
| bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); |
| break; |
| #endif |
| } |
| while (1) |
| cpu_relax(); |
| } |
| |
| #ifdef CONFIG_BCM47XX_SSB |
| static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out) |
| { |
| char prefix[10]; |
| |
| if (bus->bustype == SSB_BUSTYPE_PCI) { |
| memset(out, 0, sizeof(struct ssb_sprom)); |
| snprintf(prefix, sizeof(prefix), "pci/%u/%u/", |
| bus->host_pci->bus->number + 1, |
| PCI_SLOT(bus->host_pci->devfn)); |
| bcm47xx_fill_sprom(out, prefix, false); |
| return 0; |
| } else { |
| printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| static int bcm47xx_get_invariants(struct ssb_bus *bus, |
| struct ssb_init_invariants *iv) |
| { |
| char buf[20]; |
| |
| /* Fill boardinfo structure */ |
| memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); |
| |
| bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL); |
| |
| memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); |
| bcm47xx_fill_sprom(&iv->sprom, NULL, false); |
| |
| if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) |
| iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); |
| |
| return 0; |
| } |
| |
| static void __init bcm47xx_register_ssb(void) |
| { |
| int err; |
| char buf[100]; |
| struct ssb_mipscore *mcore; |
| |
| err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb); |
| if (err) |
| printk(KERN_WARNING "bcm47xx: someone else already registered" |
| " a ssb SPROM callback handler (err %d)\n", err); |
| |
| err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE, |
| bcm47xx_get_invariants); |
| if (err) |
| panic("Failed to initialize SSB bus (err %d)", err); |
| |
| mcore = &bcm47xx_bus.ssb.mipscore; |
| if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { |
| if (strstr(buf, "console=ttyS1")) { |
| struct ssb_serial_port port; |
| |
| printk(KERN_DEBUG "Swapping serial ports!\n"); |
| /* swap serial ports */ |
| memcpy(&port, &mcore->serial_ports[0], sizeof(port)); |
| memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], |
| sizeof(port)); |
| memcpy(&mcore->serial_ports[1], &port, sizeof(port)); |
| } |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_BCM47XX_BCMA |
| static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out) |
| { |
| char prefix[10]; |
| struct bcma_device *core; |
| |
| switch (bus->hosttype) { |
| case BCMA_HOSTTYPE_PCI: |
| memset(out, 0, sizeof(struct ssb_sprom)); |
| snprintf(prefix, sizeof(prefix), "pci/%u/%u/", |
| bus->host_pci->bus->number + 1, |
| PCI_SLOT(bus->host_pci->devfn)); |
| bcm47xx_fill_sprom(out, prefix, false); |
| return 0; |
| case BCMA_HOSTTYPE_SOC: |
| memset(out, 0, sizeof(struct ssb_sprom)); |
| core = bcma_find_core(bus, BCMA_CORE_80211); |
| if (core) { |
| snprintf(prefix, sizeof(prefix), "sb/%u/", |
| core->core_index); |
| bcm47xx_fill_sprom(out, prefix, true); |
| } else { |
| bcm47xx_fill_sprom(out, NULL, false); |
| } |
| return 0; |
| default: |
| pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| static void __init bcm47xx_register_bcma(void) |
| { |
| int err; |
| |
| err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma); |
| if (err) |
| pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err); |
| |
| err = bcma_host_soc_register(&bcm47xx_bus.bcma); |
| if (err) |
| panic("Failed to register BCMA bus (err %d)", err); |
| |
| err = bcma_host_soc_init(&bcm47xx_bus.bcma); |
| if (err) |
| panic("Failed to initialize BCMA bus (err %d)", err); |
| |
| bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL); |
| } |
| #endif |
| |
| void __init plat_mem_setup(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) { |
| printk(KERN_INFO "bcm47xx: using bcma bus\n"); |
| #ifdef CONFIG_BCM47XX_BCMA |
| bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; |
| bcm47xx_register_bcma(); |
| bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id); |
| #ifdef CONFIG_HIGHMEM |
| bcm47xx_prom_highmem_init(); |
| #endif |
| #endif |
| } else { |
| printk(KERN_INFO "bcm47xx: using ssb bus\n"); |
| #ifdef CONFIG_BCM47XX_SSB |
| bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; |
| bcm47xx_register_ssb(); |
| bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id); |
| #endif |
| } |
| |
| _machine_restart = bcm47xx_machine_restart; |
| _machine_halt = bcm47xx_machine_halt; |
| pm_power_off = bcm47xx_machine_halt; |
| bcm47xx_board_detect(); |
| mips_set_machine_name(bcm47xx_board_get_name()); |
| } |
| |
| static int __init bcm47xx_cpu_fixes(void) |
| { |
| switch (bcm47xx_bus_type) { |
| #ifdef CONFIG_BCM47XX_SSB |
| case BCM47XX_BUS_TYPE_SSB: |
| /* Nothing to do */ |
| break; |
| #endif |
| #ifdef CONFIG_BCM47XX_BCMA |
| case BCM47XX_BUS_TYPE_BCMA: |
| /* The BCM4706 has a problem with the CPU wait instruction. |
| * When r4k_wait or r4k_wait_irqoff is used will just hang and |
| * not return from a msleep(). Removing the cpu_wait |
| * functionality is a workaround for this problem. The BCM4716 |
| * does not have this problem. |
| */ |
| if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) |
| cpu_wait = NULL; |
| break; |
| #endif |
| } |
| return 0; |
| } |
| arch_initcall(bcm47xx_cpu_fixes); |
| |
| static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = { |
| .link = 1, |
| .speed = SPEED_100, |
| .duplex = DUPLEX_FULL, |
| }; |
| |
| static int __init bcm47xx_register_bus_complete(void) |
| { |
| switch (bcm47xx_bus_type) { |
| #ifdef CONFIG_BCM47XX_SSB |
| case BCM47XX_BUS_TYPE_SSB: |
| /* Nothing to do */ |
| break; |
| #endif |
| #ifdef CONFIG_BCM47XX_BCMA |
| case BCM47XX_BUS_TYPE_BCMA: |
| bcma_bus_register(&bcm47xx_bus.bcma.bus); |
| break; |
| #endif |
| } |
| bcm47xx_buttons_register(); |
| bcm47xx_leds_register(); |
| bcm47xx_workarounds(); |
| |
| fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status); |
| return 0; |
| } |
| device_initcall(bcm47xx_register_bus_complete); |