| /* |
| * USB device controllers have lots of quirks. Use these macros in |
| * gadget drivers or other code that needs to deal with them, and which |
| * autoconfigures instead of using early binding to the hardware. |
| * |
| * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by |
| * some config file that gets updated as new hardware is supported. |
| * (And avoiding all runtime comparisons in typical one-choice configs!) |
| * |
| * NOTE: some of these controller drivers may not be available yet. |
| */ |
| #ifdef CONFIG_USB_GADGET_NET2280 |
| #define gadget_is_net2280(g) !strcmp("net2280", (g)->name) |
| #else |
| #define gadget_is_net2280(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_DUMMY_HCD |
| #define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name) |
| #else |
| #define gadget_is_dummy(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_PXA2XX |
| #define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name) |
| #else |
| #define gadget_is_pxa(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_GOKU |
| #define gadget_is_goku(g) !strcmp("goku_udc", (g)->name) |
| #else |
| #define gadget_is_goku(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_SUPERH |
| #define gadget_is_sh(g) !strcmp("sh_udc", (g)->name) |
| #else |
| #define gadget_is_sh(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_SA1100 |
| #define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name) |
| #else |
| #define gadget_is_sa1100(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_LH7A40X |
| #define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name) |
| #else |
| #define gadget_is_lh7a40x(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_MQ11XX |
| #define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name) |
| #else |
| #define gadget_is_mq11xx(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_OMAP |
| #define gadget_is_omap(g) !strcmp("omap_udc", (g)->name) |
| #else |
| #define gadget_is_omap(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_N9604 |
| #define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name) |
| #else |
| #define gadget_is_n9604(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_PXA27X |
| #define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name) |
| #else |
| #define gadget_is_pxa27x(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_HUSB2DEV |
| #define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name) |
| #else |
| #define gadget_is_husb2dev(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_S3C2410 |
| #define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name) |
| #else |
| #define gadget_is_s3c2410(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_AT91 |
| #define gadget_is_at91(g) !strcmp("at91_udc", (g)->name) |
| #else |
| #define gadget_is_at91(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_IMX |
| #define gadget_is_imx(g) !strcmp("imx_udc", (g)->name) |
| #else |
| #define gadget_is_imx(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_FSL_USB2 |
| #define gadget_is_fsl_usb2(g) !strcmp("fsl-usb2-udc", (g)->name) |
| #else |
| #define gadget_is_fsl_usb2(g) 0 |
| #endif |
| |
| /* Mentor high speed function controller */ |
| #ifdef CONFIG_USB_GADGET_MUSBHSFC |
| #define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name) |
| #else |
| #define gadget_is_musbhsfc(g) 0 |
| #endif |
| |
| /* Mentor high speed "dual role" controller, in peripheral role */ |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| #define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name) |
| #else |
| #define gadget_is_musbhdrc(g) 0 |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_MPC8272 |
| #define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name) |
| #else |
| #define gadget_is_mpc8272(g) 0 |
| #endif |
| |
| // CONFIG_USB_GADGET_SX2 |
| // CONFIG_USB_GADGET_AU1X00 |
| // ... |
| |
| |
| /** |
| * usb_gadget_controller_number - support bcdDevice id convention |
| * @gadget: the controller being driven |
| * |
| * Return a 2-digit BCD value associated with the peripheral controller, |
| * suitable for use as part of a bcdDevice value, or a negative error code. |
| * |
| * NOTE: this convention is purely optional, and has no meaning in terms of |
| * any USB specification. If you want to use a different convention in your |
| * gadget driver firmware -- maybe a more formal revision ID -- feel free. |
| * |
| * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) |
| * to change their behavior accordingly. For example it might help avoiding |
| * some chip bug. |
| */ |
| static inline int usb_gadget_controller_number(struct usb_gadget *gadget) |
| { |
| if (gadget_is_net2280(gadget)) |
| return 0x01; |
| else if (gadget_is_dummy(gadget)) |
| return 0x02; |
| else if (gadget_is_pxa(gadget)) |
| return 0x03; |
| else if (gadget_is_sh(gadget)) |
| return 0x04; |
| else if (gadget_is_sa1100(gadget)) |
| return 0x05; |
| else if (gadget_is_goku(gadget)) |
| return 0x06; |
| else if (gadget_is_mq11xx(gadget)) |
| return 0x07; |
| else if (gadget_is_omap(gadget)) |
| return 0x08; |
| else if (gadget_is_lh7a40x(gadget)) |
| return 0x09; |
| else if (gadget_is_n9604(gadget)) |
| return 0x10; |
| else if (gadget_is_pxa27x(gadget)) |
| return 0x11; |
| else if (gadget_is_s3c2410(gadget)) |
| return 0x12; |
| else if (gadget_is_at91(gadget)) |
| return 0x13; |
| else if (gadget_is_imx(gadget)) |
| return 0x14; |
| else if (gadget_is_musbhsfc(gadget)) |
| return 0x15; |
| else if (gadget_is_musbhdrc(gadget)) |
| return 0x16; |
| else if (gadget_is_mpc8272(gadget)) |
| return 0x17; |
| else if (gadget_is_husb2dev(gadget)) |
| return 0x18; |
| else if (gadget_is_fsl_usb2(gadget)) |
| return 0x19; |
| return -ENOENT; |
| } |