| /* |
| * HPE WatchDog Driver |
| * based on |
| * |
| * SoftDog 0.05: A Software Watchdog Device |
| * |
| * (c) Copyright 2018 Hewlett Packard Enterprise Development LP |
| * Thomas Mingarelli <thomas.mingarelli@hpe.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/types.h> |
| #include <linux/watchdog.h> |
| #include <asm/nmi.h> |
| |
| #define HPWDT_VERSION "2.0.2" |
| #define SECS_TO_TICKS(secs) ((secs) * 1000 / 128) |
| #define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000) |
| #define HPWDT_MAX_TIMER TICKS_TO_SECS(65535) |
| #define DEFAULT_MARGIN 30 |
| #define PRETIMEOUT_SEC 9 |
| |
| static bool ilo5; |
| static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */ |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| static bool pretimeout = IS_ENABLED(CONFIG_HPWDT_NMI_DECODING); |
| |
| static void __iomem *pci_mem_addr; /* the PCI-memory address */ |
| static unsigned long __iomem *hpwdt_nmistat; |
| static unsigned long __iomem *hpwdt_timer_reg; |
| static unsigned long __iomem *hpwdt_timer_con; |
| |
| static const struct pci_device_id hpwdt_devices[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */ |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */ |
| {0}, /* terminate list */ |
| }; |
| MODULE_DEVICE_TABLE(pci, hpwdt_devices); |
| |
| static const struct pci_device_id hpwdt_blacklist[] = { |
| { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP, 0x3306, PCI_VENDOR_ID_HP, 0x1979) }, /* auxilary iLO */ |
| { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP, 0x3306, PCI_VENDOR_ID_HP_3PAR, 0x0289) }, /* CL */ |
| {0}, /* terminate list */ |
| }; |
| |
| /* |
| * Watchdog operations |
| */ |
| static int hpwdt_start(struct watchdog_device *wdd) |
| { |
| int control = 0x81 | (pretimeout ? 0x4 : 0); |
| int reload = SECS_TO_TICKS(wdd->timeout); |
| |
| dev_dbg(wdd->parent, "start watchdog 0x%08x:0x%02x\n", reload, control); |
| iowrite16(reload, hpwdt_timer_reg); |
| iowrite8(control, hpwdt_timer_con); |
| |
| return 0; |
| } |
| |
| static void hpwdt_stop(void) |
| { |
| unsigned long data; |
| |
| pr_debug("stop watchdog\n"); |
| |
| data = ioread8(hpwdt_timer_con); |
| data &= 0xFE; |
| iowrite8(data, hpwdt_timer_con); |
| } |
| |
| static int hpwdt_stop_core(struct watchdog_device *wdd) |
| { |
| hpwdt_stop(); |
| |
| return 0; |
| } |
| |
| static int hpwdt_ping(struct watchdog_device *wdd) |
| { |
| int reload = SECS_TO_TICKS(wdd->timeout); |
| |
| dev_dbg(wdd->parent, "ping watchdog 0x%08x\n", reload); |
| iowrite16(reload, hpwdt_timer_reg); |
| |
| return 0; |
| } |
| |
| static unsigned int hpwdt_gettimeleft(struct watchdog_device *wdd) |
| { |
| return TICKS_TO_SECS(ioread16(hpwdt_timer_reg)); |
| } |
| |
| static int hpwdt_settimeout(struct watchdog_device *wdd, unsigned int val) |
| { |
| dev_dbg(wdd->parent, "set_timeout = %d\n", val); |
| |
| wdd->timeout = val; |
| if (val <= wdd->pretimeout) { |
| dev_dbg(wdd->parent, "pretimeout < timeout. Setting to zero\n"); |
| wdd->pretimeout = 0; |
| pretimeout = 0; |
| if (watchdog_active(wdd)) |
| hpwdt_start(wdd); |
| } |
| hpwdt_ping(wdd); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| static int hpwdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req) |
| { |
| unsigned int val = 0; |
| |
| dev_dbg(wdd->parent, "set_pretimeout = %d\n", req); |
| if (req) { |
| val = PRETIMEOUT_SEC; |
| if (val >= wdd->timeout) |
| return -EINVAL; |
| } |
| |
| if (val != req) |
| dev_dbg(wdd->parent, "Rounding pretimeout to: %d\n", val); |
| |
| wdd->pretimeout = val; |
| pretimeout = !!val; |
| |
| if (watchdog_active(wdd)) |
| hpwdt_start(wdd); |
| |
| return 0; |
| } |
| |
| static int hpwdt_my_nmi(void) |
| { |
| return ioread8(hpwdt_nmistat) & 0x6; |
| } |
| |
| /* |
| * NMI Handler |
| */ |
| static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs) |
| { |
| unsigned int mynmi = hpwdt_my_nmi(); |
| static char panic_msg[] = |
| "00: An NMI occurred. Depending on your system the reason " |
| "for the NMI is logged in any one of the following resources:\n" |
| "1. Integrated Management Log (IML)\n" |
| "2. OA Syslog\n" |
| "3. OA Forward Progress Log\n" |
| "4. iLO Event Log"; |
| |
| if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi) |
| return NMI_DONE; |
| |
| if (ilo5 && !pretimeout && !mynmi) |
| return NMI_DONE; |
| |
| hpwdt_stop(); |
| |
| hex_byte_pack(panic_msg, mynmi); |
| nmi_panic(regs, panic_msg); |
| |
| return NMI_HANDLED; |
| } |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_PRETIMEOUT | |
| WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .identity = "HPE iLO2+ HW Watchdog Timer", |
| }; |
| |
| /* |
| * Kernel interfaces |
| */ |
| |
| static const struct watchdog_ops hpwdt_ops = { |
| .owner = THIS_MODULE, |
| .start = hpwdt_start, |
| .stop = hpwdt_stop_core, |
| .ping = hpwdt_ping, |
| .set_timeout = hpwdt_settimeout, |
| .get_timeleft = hpwdt_gettimeleft, |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| .set_pretimeout = hpwdt_set_pretimeout, |
| #endif |
| }; |
| |
| static struct watchdog_device hpwdt_dev = { |
| .info = &ident, |
| .ops = &hpwdt_ops, |
| .min_timeout = 1, |
| .max_timeout = HPWDT_MAX_TIMER, |
| .timeout = DEFAULT_MARGIN, |
| .pretimeout = PRETIMEOUT_SEC, |
| }; |
| |
| |
| /* |
| * Init & Exit |
| */ |
| |
| static int hpwdt_init_nmi_decoding(struct pci_dev *dev) |
| { |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| int retval; |
| /* |
| * Only one function can register for NMI_UNKNOWN |
| */ |
| retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error; |
| retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error1; |
| retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error2; |
| |
| dev_info(&dev->dev, |
| "HPE Watchdog Timer Driver: NMI decoding initialized\n"); |
| |
| return 0; |
| |
| error2: |
| unregister_nmi_handler(NMI_SERR, "hpwdt"); |
| error1: |
| unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); |
| error: |
| dev_warn(&dev->dev, |
| "Unable to register a die notifier (err=%d).\n", |
| retval); |
| return retval; |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| return 0; |
| } |
| |
| static void hpwdt_exit_nmi_decoding(void) |
| { |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); |
| unregister_nmi_handler(NMI_SERR, "hpwdt"); |
| unregister_nmi_handler(NMI_IO_CHECK, "hpwdt"); |
| #endif |
| } |
| |
| static int hpwdt_init_one(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| int retval; |
| |
| /* |
| * First let's find out if we are on an iLO2+ server. We will |
| * not run on a legacy ASM box. |
| * So we only support the G5 ProLiant servers and higher. |
| */ |
| if (dev->subsystem_vendor != PCI_VENDOR_ID_HP && |
| dev->subsystem_vendor != PCI_VENDOR_ID_HP_3PAR) { |
| dev_warn(&dev->dev, |
| "This server does not have an iLO2+ ASIC.\n"); |
| return -ENODEV; |
| } |
| |
| if (pci_match_id(hpwdt_blacklist, dev)) { |
| dev_dbg(&dev->dev, "Not supported on this device\n"); |
| return -ENODEV; |
| } |
| |
| if (pci_enable_device(dev)) { |
| dev_warn(&dev->dev, |
| "Not possible to enable PCI Device: 0x%x:0x%x.\n", |
| ent->vendor, ent->device); |
| return -ENODEV; |
| } |
| |
| pci_mem_addr = pci_iomap(dev, 1, 0x80); |
| if (!pci_mem_addr) { |
| dev_warn(&dev->dev, |
| "Unable to detect the iLO2+ server memory.\n"); |
| retval = -ENOMEM; |
| goto error_pci_iomap; |
| } |
| hpwdt_nmistat = pci_mem_addr + 0x6e; |
| hpwdt_timer_reg = pci_mem_addr + 0x70; |
| hpwdt_timer_con = pci_mem_addr + 0x72; |
| |
| /* Make sure that timer is disabled until /dev/watchdog is opened */ |
| hpwdt_stop(); |
| |
| /* Initialize NMI Decoding functionality */ |
| retval = hpwdt_init_nmi_decoding(dev); |
| if (retval != 0) |
| goto error_init_nmi_decoding; |
| |
| watchdog_set_nowayout(&hpwdt_dev, nowayout); |
| if (watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL)) |
| dev_warn(&dev->dev, "Invalid soft_margin: %d.\n", soft_margin); |
| |
| if (pretimeout && hpwdt_dev.timeout <= PRETIMEOUT_SEC) { |
| dev_warn(&dev->dev, "timeout <= pretimeout. Setting pretimeout to zero\n"); |
| pretimeout = 0; |
| } |
| hpwdt_dev.pretimeout = pretimeout ? PRETIMEOUT_SEC : 0; |
| |
| hpwdt_dev.parent = &dev->dev; |
| retval = watchdog_register_device(&hpwdt_dev); |
| if (retval < 0) { |
| dev_err(&dev->dev, "watchdog register failed: %d.\n", retval); |
| goto error_wd_register; |
| } |
| |
| dev_info(&dev->dev, "HPE Watchdog Timer Driver: Version: %s\n", |
| HPWDT_VERSION); |
| dev_info(&dev->dev, "timeout: %d seconds (nowayout=%d)\n", |
| hpwdt_dev.timeout, nowayout); |
| dev_info(&dev->dev, "pretimeout: %s.\n", |
| pretimeout ? "on" : "off"); |
| |
| if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR) |
| ilo5 = true; |
| |
| return 0; |
| |
| error_wd_register: |
| hpwdt_exit_nmi_decoding(); |
| error_init_nmi_decoding: |
| pci_iounmap(dev, pci_mem_addr); |
| error_pci_iomap: |
| pci_disable_device(dev); |
| return retval; |
| } |
| |
| static void hpwdt_exit(struct pci_dev *dev) |
| { |
| if (!nowayout) |
| hpwdt_stop(); |
| |
| watchdog_unregister_device(&hpwdt_dev); |
| hpwdt_exit_nmi_decoding(); |
| pci_iounmap(dev, pci_mem_addr); |
| pci_disable_device(dev); |
| } |
| |
| static struct pci_driver hpwdt_driver = { |
| .name = "hpwdt", |
| .id_table = hpwdt_devices, |
| .probe = hpwdt_init_one, |
| .remove = hpwdt_exit, |
| }; |
| |
| MODULE_AUTHOR("Tom Mingarelli"); |
| MODULE_DESCRIPTION("hpe watchdog driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(HPWDT_VERSION); |
| |
| module_param(soft_margin, int, 0); |
| MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); |
| |
| module_param_named(timeout, soft_margin, int, 0); |
| MODULE_PARM_DESC(timeout, "Alias of soft_margin"); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| module_param(pretimeout, bool, 0); |
| MODULE_PARM_DESC(pretimeout, "Watchdog pretimeout enabled"); |
| #endif |
| |
| module_pci_driver(hpwdt_driver); |