| /* |
| * HDMI CEC |
| * |
| * Based on the CEC code from hdmi_ti_4xxx_ip.c from Android. |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * Authors: Yong Zhi |
| * Mythri pk <mythripk@ti.com> |
| * |
| * Heavily modified to use the linux CEC framework: |
| * |
| * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| * |
| * This program is free software; you may redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include "dss.h" |
| #include "hdmi.h" |
| #include "hdmi4_core.h" |
| #include "hdmi4_cec.h" |
| |
| /* HDMI CEC */ |
| #define HDMI_CEC_DEV_ID 0x900 |
| #define HDMI_CEC_SPEC 0x904 |
| |
| /* Not really a debug register, more a low-level control register */ |
| #define HDMI_CEC_DBG_3 0x91C |
| #define HDMI_CEC_TX_INIT 0x920 |
| #define HDMI_CEC_TX_DEST 0x924 |
| #define HDMI_CEC_SETUP 0x938 |
| #define HDMI_CEC_TX_COMMAND 0x93C |
| #define HDMI_CEC_TX_OPERAND 0x940 |
| #define HDMI_CEC_TRANSMIT_DATA 0x97C |
| #define HDMI_CEC_CA_7_0 0x988 |
| #define HDMI_CEC_CA_15_8 0x98C |
| #define HDMI_CEC_INT_STATUS_0 0x998 |
| #define HDMI_CEC_INT_STATUS_1 0x99C |
| #define HDMI_CEC_INT_ENABLE_0 0x990 |
| #define HDMI_CEC_INT_ENABLE_1 0x994 |
| #define HDMI_CEC_RX_CONTROL 0x9B0 |
| #define HDMI_CEC_RX_COUNT 0x9B4 |
| #define HDMI_CEC_RX_CMD_HEADER 0x9B8 |
| #define HDMI_CEC_RX_COMMAND 0x9BC |
| #define HDMI_CEC_RX_OPERAND 0x9C0 |
| |
| #define HDMI_CEC_TX_FIFO_INT_MASK 0x64 |
| #define HDMI_CEC_RETRANSMIT_CNT_INT_MASK 0x2 |
| |
| #define HDMI_CORE_CEC_RETRY 200 |
| |
| static void hdmi_cec_received_msg(struct hdmi_core_data *core) |
| { |
| u32 cnt = hdmi_read_reg(core->base, HDMI_CEC_RX_COUNT) & 0xff; |
| |
| /* While there are CEC frames in the FIFO */ |
| while (cnt & 0x70) { |
| /* and the frame doesn't have an error */ |
| if (!(cnt & 0x80)) { |
| struct cec_msg msg = {}; |
| unsigned int i; |
| |
| /* then read the message */ |
| msg.len = cnt & 0xf; |
| msg.msg[0] = hdmi_read_reg(core->base, |
| HDMI_CEC_RX_CMD_HEADER); |
| msg.msg[1] = hdmi_read_reg(core->base, |
| HDMI_CEC_RX_COMMAND); |
| for (i = 0; i < msg.len; i++) { |
| unsigned int reg = HDMI_CEC_RX_OPERAND + i * 4; |
| |
| msg.msg[2 + i] = |
| hdmi_read_reg(core->base, reg); |
| } |
| msg.len += 2; |
| cec_received_msg(core->adap, &msg); |
| } |
| /* Clear the current frame from the FIFO */ |
| hdmi_write_reg(core->base, HDMI_CEC_RX_CONTROL, 1); |
| /* Wait until the current frame is cleared */ |
| while (hdmi_read_reg(core->base, HDMI_CEC_RX_CONTROL) & 1) |
| udelay(1); |
| /* |
| * Re-read the count register and loop to see if there are |
| * more messages in the FIFO. |
| */ |
| cnt = hdmi_read_reg(core->base, HDMI_CEC_RX_COUNT) & 0xff; |
| } |
| } |
| |
| static void hdmi_cec_transmit_fifo_empty(struct hdmi_core_data *core, u32 stat1) |
| { |
| if (stat1 & 2) { |
| u32 dbg3 = hdmi_read_reg(core->base, HDMI_CEC_DBG_3); |
| |
| cec_transmit_done(core->adap, |
| CEC_TX_STATUS_NACK | |
| CEC_TX_STATUS_MAX_RETRIES, |
| 0, (dbg3 >> 4) & 7, 0, 0); |
| } else if (stat1 & 1) { |
| cec_transmit_done(core->adap, |
| CEC_TX_STATUS_ARB_LOST | |
| CEC_TX_STATUS_MAX_RETRIES, |
| 0, 0, 0, 0); |
| } else if (stat1 == 0) { |
| cec_transmit_done(core->adap, CEC_TX_STATUS_OK, |
| 0, 0, 0, 0); |
| } |
| } |
| |
| void hdmi4_cec_irq(struct hdmi_core_data *core) |
| { |
| u32 stat0 = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_0); |
| u32 stat1 = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1); |
| |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, stat0); |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, stat1); |
| |
| if (stat0 & 0x40) |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); |
| else if (stat0 & 0x24) |
| hdmi_cec_transmit_fifo_empty(core, stat1); |
| if (stat1 & 2) { |
| u32 dbg3 = hdmi_read_reg(core->base, HDMI_CEC_DBG_3); |
| |
| cec_transmit_done(core->adap, |
| CEC_TX_STATUS_NACK | |
| CEC_TX_STATUS_MAX_RETRIES, |
| 0, (dbg3 >> 4) & 7, 0, 0); |
| } else if (stat1 & 1) { |
| cec_transmit_done(core->adap, |
| CEC_TX_STATUS_ARB_LOST | |
| CEC_TX_STATUS_MAX_RETRIES, |
| 0, 0, 0, 0); |
| } |
| if (stat0 & 0x02) |
| hdmi_cec_received_msg(core); |
| if (stat1 & 0x3) |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); |
| } |
| |
| static bool hdmi_cec_clear_tx_fifo(struct cec_adapter *adap) |
| { |
| struct hdmi_core_data *core = cec_get_drvdata(adap); |
| int retry = HDMI_CORE_CEC_RETRY; |
| int temp; |
| |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); |
| while (retry) { |
| temp = hdmi_read_reg(core->base, HDMI_CEC_DBG_3); |
| if (FLD_GET(temp, 7, 7) == 0) |
| break; |
| retry--; |
| } |
| return retry != 0; |
| } |
| |
| static bool hdmi_cec_clear_rx_fifo(struct cec_adapter *adap) |
| { |
| struct hdmi_core_data *core = cec_get_drvdata(adap); |
| int retry = HDMI_CORE_CEC_RETRY; |
| int temp; |
| |
| hdmi_write_reg(core->base, HDMI_CEC_RX_CONTROL, 0x3); |
| retry = HDMI_CORE_CEC_RETRY; |
| while (retry) { |
| temp = hdmi_read_reg(core->base, HDMI_CEC_RX_CONTROL); |
| if (FLD_GET(temp, 1, 0) == 0) |
| break; |
| retry--; |
| } |
| return retry != 0; |
| } |
| |
| static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable) |
| { |
| struct hdmi_core_data *core = cec_get_drvdata(adap); |
| int temp, err; |
| |
| if (!enable) { |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_0, 0); |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_1, 0); |
| REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0, 3, 3); |
| hdmi_wp_clear_irqenable(core->wp, HDMI_IRQ_CORE); |
| hdmi_wp_set_irqstatus(core->wp, HDMI_IRQ_CORE); |
| hdmi4_core_disable(NULL); |
| return 0; |
| } |
| err = hdmi4_core_enable(NULL); |
| if (err) |
| return err; |
| |
| /* Clear TX FIFO */ |
| if (!hdmi_cec_clear_tx_fifo(adap)) { |
| pr_err("cec-%s: could not clear TX FIFO\n", adap->name); |
| return -EIO; |
| } |
| |
| /* Clear RX FIFO */ |
| if (!hdmi_cec_clear_rx_fifo(adap)) { |
| pr_err("cec-%s: could not clear RX FIFO\n", adap->name); |
| return -EIO; |
| } |
| |
| /* Clear CEC interrupts */ |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, |
| hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1)); |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, |
| hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_0)); |
| |
| /* Enable HDMI core interrupts */ |
| hdmi_wp_set_irqenable(core->wp, HDMI_IRQ_CORE); |
| /* Unmask CEC interrupt */ |
| REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0x1, 3, 3); |
| /* |
| * Enable CEC interrupts: |
| * Transmit Buffer Full/Empty Change event |
| * Transmitter FIFO Empty event |
| * Receiver FIFO Not Empty event |
| */ |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_0, 0x26); |
| /* |
| * Enable CEC interrupts: |
| * RX FIFO Overrun Error event |
| * Short Pulse Detected event |
| * Frame Retransmit Count Exceeded event |
| * Start Bit Irregularity event |
| */ |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_1, 0x0f); |
| |
| /* cec calibration enable (self clearing) */ |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, 0x03); |
| msleep(20); |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, 0x04); |
| |
| temp = hdmi_read_reg(core->base, HDMI_CEC_SETUP); |
| if (FLD_GET(temp, 4, 4) != 0) { |
| temp = FLD_MOD(temp, 0, 4, 4); |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, temp); |
| |
| /* |
| * If we enabled CEC in middle of a CEC message on the bus, |
| * we could have start bit irregularity and/or short |
| * pulse event. Clear them now. |
| */ |
| temp = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1); |
| temp = FLD_MOD(0x0, 0x5, 2, 0); |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, temp); |
| } |
| return 0; |
| } |
| |
| static int hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) |
| { |
| struct hdmi_core_data *core = cec_get_drvdata(adap); |
| u32 v; |
| |
| if (log_addr == CEC_LOG_ADDR_INVALID) { |
| hdmi_write_reg(core->base, HDMI_CEC_CA_7_0, 0); |
| hdmi_write_reg(core->base, HDMI_CEC_CA_15_8, 0); |
| return 0; |
| } |
| if (log_addr <= 7) { |
| v = hdmi_read_reg(core->base, HDMI_CEC_CA_7_0); |
| v |= 1 << log_addr; |
| hdmi_write_reg(core->base, HDMI_CEC_CA_7_0, v); |
| } else { |
| v = hdmi_read_reg(core->base, HDMI_CEC_CA_15_8); |
| v |= 1 << (log_addr - 8); |
| hdmi_write_reg(core->base, HDMI_CEC_CA_15_8, v); |
| } |
| return 0; |
| } |
| |
| static int hdmi_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, |
| u32 signal_free_time, struct cec_msg *msg) |
| { |
| struct hdmi_core_data *core = cec_get_drvdata(adap); |
| int temp; |
| u32 i; |
| |
| /* Clear TX FIFO */ |
| if (!hdmi_cec_clear_tx_fifo(adap)) { |
| pr_err("cec-%s: could not clear TX FIFO for transmit\n", |
| adap->name); |
| return -EIO; |
| } |
| |
| /* Clear TX interrupts */ |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, |
| HDMI_CEC_TX_FIFO_INT_MASK); |
| |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, |
| HDMI_CEC_RETRANSMIT_CNT_INT_MASK); |
| |
| /* Set the retry count */ |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, attempts - 1, 6, 4); |
| |
| /* Set the initiator addresses */ |
| hdmi_write_reg(core->base, HDMI_CEC_TX_INIT, cec_msg_initiator(msg)); |
| |
| /* Set destination id */ |
| temp = cec_msg_destination(msg); |
| if (msg->len == 1) |
| temp |= 0x80; |
| hdmi_write_reg(core->base, HDMI_CEC_TX_DEST, temp); |
| if (msg->len == 1) |
| return 0; |
| |
| /* Setup command and arguments for the command */ |
| hdmi_write_reg(core->base, HDMI_CEC_TX_COMMAND, msg->msg[1]); |
| |
| for (i = 0; i < msg->len - 2; i++) |
| hdmi_write_reg(core->base, HDMI_CEC_TX_OPERAND + i * 4, |
| msg->msg[2 + i]); |
| |
| /* Operand count */ |
| hdmi_write_reg(core->base, HDMI_CEC_TRANSMIT_DATA, |
| (msg->len - 2) | 0x10); |
| return 0; |
| } |
| |
| static const struct cec_adap_ops hdmi_cec_adap_ops = { |
| .adap_enable = hdmi_cec_adap_enable, |
| .adap_log_addr = hdmi_cec_adap_log_addr, |
| .adap_transmit = hdmi_cec_adap_transmit, |
| }; |
| |
| void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa) |
| { |
| cec_s_phys_addr(core->adap, pa, false); |
| } |
| |
| int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core, |
| struct hdmi_wp_data *wp) |
| { |
| const u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS | |
| CEC_CAP_PASSTHROUGH | CEC_CAP_RC; |
| int ret; |
| |
| core->adap = cec_allocate_adapter(&hdmi_cec_adap_ops, core, |
| "omap4", caps, CEC_MAX_LOG_ADDRS); |
| ret = PTR_ERR_OR_ZERO(core->adap); |
| if (ret < 0) |
| return ret; |
| core->wp = wp; |
| |
| /* |
| * Initialize CEC clock divider: CEC needs 2MHz clock hence |
| * set the devider to 24 to get 48/24=2MHz clock |
| */ |
| REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0); |
| |
| ret = cec_register_adapter(core->adap, &pdev->dev); |
| if (ret < 0) { |
| cec_delete_adapter(core->adap); |
| return ret; |
| } |
| return 0; |
| } |
| |
| void hdmi4_cec_uninit(struct hdmi_core_data *core) |
| { |
| cec_unregister_adapter(core->adap); |
| } |