| /* |
| * HID driver for Sony / PS2 / PS3 BD devices. |
| * |
| * Copyright (c) 1999 Andreas Gal |
| * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> |
| * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc |
| * Copyright (c) 2008 Jiri Slaby |
| * Copyright (c) 2012 David Dillow <dave@thedillows.org> |
| * Copyright (c) 2006-2013 Jiri Kosina |
| * Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com> |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| */ |
| |
| /* |
| * NOTE: in order for the Sony PS3 BD Remote Control to be found by |
| * a Bluetooth host, the key combination Start+Enter has to be kept pressed |
| * for about 7 seconds with the Bluetooth Host Controller in discovering mode. |
| * |
| * There will be no PIN request from the device. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/hid.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/leds.h> |
| #include <linux/power_supply.h> |
| #include <linux/spinlock.h> |
| #include <linux/list.h> |
| #include <linux/input/mt.h> |
| |
| #include "hid-ids.h" |
| |
| #define VAIO_RDESC_CONSTANT BIT(0) |
| #define SIXAXIS_CONTROLLER_USB BIT(1) |
| #define SIXAXIS_CONTROLLER_BT BIT(2) |
| #define BUZZ_CONTROLLER BIT(3) |
| #define PS3REMOTE BIT(4) |
| #define DUALSHOCK4_CONTROLLER_USB BIT(5) |
| #define DUALSHOCK4_CONTROLLER_BT BIT(6) |
| |
| #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT) |
| #define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\ |
| DUALSHOCK4_CONTROLLER_BT) |
| #define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\ |
| DUALSHOCK4_CONTROLLER) |
| #define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER) |
| #define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER) |
| |
| #define MAX_LEDS 4 |
| |
| static const u8 sixaxis_rdesc_fixup[] = { |
| 0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C, |
| 0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF, |
| 0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02 |
| }; |
| |
| static const u8 sixaxis_rdesc_fixup2[] = { |
| 0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02, |
| 0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00, |
| 0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95, |
| 0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45, |
| 0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81, |
| 0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff, |
| 0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05, |
| 0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95, |
| 0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30, |
| 0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02, |
| 0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81, |
| 0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95, |
| 0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09, |
| 0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02, |
| 0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02, |
| 0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95, |
| 0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02, |
| 0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01, |
| 0xb1, 0x02, 0xc0, 0xc0, |
| }; |
| |
| /* |
| * The default descriptor doesn't provide mapping for the accelerometers |
| * or orientation sensors. This fixed descriptor maps the accelerometers |
| * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors |
| * to usage values 0x43, 0x44 and 0x45. |
| */ |
| static u8 dualshock4_usb_rdesc[] = { |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x09, 0x05, /* Usage (Gamepad), */ |
| 0xA1, 0x01, /* Collection (Application), */ |
| 0x85, 0x01, /* Report ID (1), */ |
| 0x09, 0x30, /* Usage (X), */ |
| 0x09, 0x31, /* Usage (Y), */ |
| 0x09, 0x32, /* Usage (Z), */ |
| 0x09, 0x35, /* Usage (Rz), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x04, /* Report Count (4), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x39, /* Usage (Hat Switch), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0x07, /* Logical Maximum (7), */ |
| 0x35, 0x00, /* Physical Minimum (0), */ |
| 0x46, 0x3B, 0x01, /* Physical Maximum (315), */ |
| 0x65, 0x14, /* Unit (Degrees), */ |
| 0x75, 0x04, /* Report Size (4), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0x81, 0x42, /* Input (Variable, Null State), */ |
| 0x65, 0x00, /* Unit, */ |
| 0x05, 0x09, /* Usage Page (Button), */ |
| 0x19, 0x01, /* Usage Minimum (01h), */ |
| 0x29, 0x0E, /* Usage Maximum (0Eh), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0x01, /* Logical Maximum (1), */ |
| 0x75, 0x01, /* Report Size (1), */ |
| 0x95, 0x0E, /* Report Count (14), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x75, 0x06, /* Report Size (6), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0x7F, /* Logical Maximum (127), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x09, 0x33, /* Usage (Rx), */ |
| 0x09, 0x34, /* Usage (Ry), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x19, 0x40, /* Usage Minimum (40h), */ |
| 0x29, 0x42, /* Usage Maximum (42h), */ |
| 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */ |
| 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */ |
| 0x75, 0x10, /* Report Size (16), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x19, 0x43, /* Usage Minimum (43h), */ |
| 0x29, 0x45, /* Usage Maximum (45h), */ |
| 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */ |
| 0x26, 0x00, 0x40, /* Logical Maximum (16384), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0xFF, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x27, /* Report Count (39), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x85, 0x05, /* Report ID (5), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x1F, /* Report Count (31), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x04, /* Report ID (4), */ |
| 0x09, 0x23, /* Usage (23h), */ |
| 0x95, 0x24, /* Report Count (36), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x02, /* Report ID (2), */ |
| 0x09, 0x24, /* Usage (24h), */ |
| 0x95, 0x24, /* Report Count (36), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x08, /* Report ID (8), */ |
| 0x09, 0x25, /* Usage (25h), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x10, /* Report ID (16), */ |
| 0x09, 0x26, /* Usage (26h), */ |
| 0x95, 0x04, /* Report Count (4), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x11, /* Report ID (17), */ |
| 0x09, 0x27, /* Usage (27h), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x12, /* Report ID (18), */ |
| 0x06, 0x02, 0xFF, /* Usage Page (FF02h), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x95, 0x0F, /* Report Count (15), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x13, /* Report ID (19), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x16, /* Report Count (22), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x14, /* Report ID (20), */ |
| 0x06, 0x05, 0xFF, /* Usage Page (FF05h), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x95, 0x10, /* Report Count (16), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x15, /* Report ID (21), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x95, 0x2C, /* Report Count (44), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */ |
| 0x85, 0x80, /* Report ID (128), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x95, 0x06, /* Report Count (6), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x81, /* Report ID (129), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x95, 0x06, /* Report Count (6), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x82, /* Report ID (130), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x05, /* Report Count (5), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x83, /* Report ID (131), */ |
| 0x09, 0x23, /* Usage (23h), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x84, /* Report ID (132), */ |
| 0x09, 0x24, /* Usage (24h), */ |
| 0x95, 0x04, /* Report Count (4), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x85, /* Report ID (133), */ |
| 0x09, 0x25, /* Usage (25h), */ |
| 0x95, 0x06, /* Report Count (6), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x86, /* Report ID (134), */ |
| 0x09, 0x26, /* Usage (26h), */ |
| 0x95, 0x06, /* Report Count (6), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x87, /* Report ID (135), */ |
| 0x09, 0x27, /* Usage (27h), */ |
| 0x95, 0x23, /* Report Count (35), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x88, /* Report ID (136), */ |
| 0x09, 0x28, /* Usage (28h), */ |
| 0x95, 0x22, /* Report Count (34), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x89, /* Report ID (137), */ |
| 0x09, 0x29, /* Usage (29h), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x90, /* Report ID (144), */ |
| 0x09, 0x30, /* Usage (30h), */ |
| 0x95, 0x05, /* Report Count (5), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x91, /* Report ID (145), */ |
| 0x09, 0x31, /* Usage (31h), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x92, /* Report ID (146), */ |
| 0x09, 0x32, /* Usage (32h), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x93, /* Report ID (147), */ |
| 0x09, 0x33, /* Usage (33h), */ |
| 0x95, 0x0C, /* Report Count (12), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA0, /* Report ID (160), */ |
| 0x09, 0x40, /* Usage (40h), */ |
| 0x95, 0x06, /* Report Count (6), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA1, /* Report ID (161), */ |
| 0x09, 0x41, /* Usage (41h), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA2, /* Report ID (162), */ |
| 0x09, 0x42, /* Usage (42h), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA3, /* Report ID (163), */ |
| 0x09, 0x43, /* Usage (43h), */ |
| 0x95, 0x30, /* Report Count (48), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA4, /* Report ID (164), */ |
| 0x09, 0x44, /* Usage (44h), */ |
| 0x95, 0x0D, /* Report Count (13), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA5, /* Report ID (165), */ |
| 0x09, 0x45, /* Usage (45h), */ |
| 0x95, 0x15, /* Report Count (21), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA6, /* Report ID (166), */ |
| 0x09, 0x46, /* Usage (46h), */ |
| 0x95, 0x15, /* Report Count (21), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF0, /* Report ID (240), */ |
| 0x09, 0x47, /* Usage (47h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF1, /* Report ID (241), */ |
| 0x09, 0x48, /* Usage (48h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF2, /* Report ID (242), */ |
| 0x09, 0x49, /* Usage (49h), */ |
| 0x95, 0x0F, /* Report Count (15), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA7, /* Report ID (167), */ |
| 0x09, 0x4A, /* Usage (4Ah), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA8, /* Report ID (168), */ |
| 0x09, 0x4B, /* Usage (4Bh), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA9, /* Report ID (169), */ |
| 0x09, 0x4C, /* Usage (4Ch), */ |
| 0x95, 0x08, /* Report Count (8), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAA, /* Report ID (170), */ |
| 0x09, 0x4E, /* Usage (4Eh), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAB, /* Report ID (171), */ |
| 0x09, 0x4F, /* Usage (4Fh), */ |
| 0x95, 0x39, /* Report Count (57), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAC, /* Report ID (172), */ |
| 0x09, 0x50, /* Usage (50h), */ |
| 0x95, 0x39, /* Report Count (57), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAD, /* Report ID (173), */ |
| 0x09, 0x51, /* Usage (51h), */ |
| 0x95, 0x0B, /* Report Count (11), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAE, /* Report ID (174), */ |
| 0x09, 0x52, /* Usage (52h), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xAF, /* Report ID (175), */ |
| 0x09, 0x53, /* Usage (53h), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xB0, /* Report ID (176), */ |
| 0x09, 0x54, /* Usage (54h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0xC0 /* End Collection */ |
| }; |
| |
| /* |
| * The default behavior of the Dualshock 4 is to send reports using report |
| * type 1 when running over Bluetooth. However, as soon as it receives a |
| * report of type 17 to set the LEDs or rumble it starts returning it's state |
| * in report 17 instead of 1. Since report 17 is undefined in the default HID |
| * descriptor the button and axis definitions must be moved to report 17 or |
| * the HID layer won't process the received input once a report is sent. |
| */ |
| static u8 dualshock4_bt_rdesc[] = { |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x09, 0x05, /* Usage (Gamepad), */ |
| 0xA1, 0x01, /* Collection (Application), */ |
| 0x85, 0x01, /* Report ID (1), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x0A, /* Report Count (9), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x04, 0xFF, /* Usage Page (FF04h), */ |
| 0x85, 0x02, /* Report ID (2), */ |
| 0x09, 0x24, /* Usage (24h), */ |
| 0x95, 0x24, /* Report Count (36), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA3, /* Report ID (163), */ |
| 0x09, 0x25, /* Usage (25h), */ |
| 0x95, 0x30, /* Report Count (48), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x05, /* Report ID (5), */ |
| 0x09, 0x26, /* Usage (26h), */ |
| 0x95, 0x28, /* Report Count (40), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x06, /* Report ID (6), */ |
| 0x09, 0x27, /* Usage (27h), */ |
| 0x95, 0x34, /* Report Count (52), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x07, /* Report ID (7), */ |
| 0x09, 0x28, /* Usage (28h), */ |
| 0x95, 0x30, /* Report Count (48), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x08, /* Report ID (8), */ |
| 0x09, 0x29, /* Usage (29h), */ |
| 0x95, 0x2F, /* Report Count (47), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x06, 0x03, 0xFF, /* Usage Page (FF03h), */ |
| 0x85, 0x03, /* Report ID (3), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x95, 0x26, /* Report Count (38), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x04, /* Report ID (4), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x2E, /* Report Count (46), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF0, /* Report ID (240), */ |
| 0x09, 0x47, /* Usage (47h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF1, /* Report ID (241), */ |
| 0x09, 0x48, /* Usage (48h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xF2, /* Report ID (242), */ |
| 0x09, 0x49, /* Usage (49h), */ |
| 0x95, 0x0F, /* Report Count (15), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x11, /* Report ID (17), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x09, 0x30, /* Usage (X), */ |
| 0x09, 0x31, /* Usage (Y), */ |
| 0x09, 0x32, /* Usage (Z), */ |
| 0x09, 0x35, /* Usage (Rz), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x04, /* Report Count (4), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x39, /* Usage (Hat Switch), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0x07, /* Logical Maximum (7), */ |
| 0x75, 0x04, /* Report Size (4), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0x81, 0x42, /* Input (Variable, Null State), */ |
| 0x05, 0x09, /* Usage Page (Button), */ |
| 0x19, 0x01, /* Usage Minimum (01h), */ |
| 0x29, 0x0E, /* Usage Maximum (0Eh), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x25, 0x01, /* Logical Maximum (1), */ |
| 0x75, 0x01, /* Report Size (1), */ |
| 0x95, 0x0E, /* Report Count (14), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x75, 0x06, /* Report Size (6), */ |
| 0x95, 0x01, /* Report Count (1), */ |
| 0x81, 0x01, /* Input (Constant), */ |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x09, 0x33, /* Usage (Rx), */ |
| 0x09, 0x34, /* Usage (Ry), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x02, /* Report Count (2), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x05, 0x01, /* Usage Page (Desktop), */ |
| 0x19, 0x40, /* Usage Minimum (40h), */ |
| 0x29, 0x42, /* Usage Maximum (42h), */ |
| 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */ |
| 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */ |
| 0x75, 0x10, /* Report Size (16), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x19, 0x43, /* Usage Minimum (43h), */ |
| 0x29, 0x45, /* Usage Maximum (45h), */ |
| 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */ |
| 0x26, 0x00, 0x40, /* Logical Maximum (16384), */ |
| 0x95, 0x03, /* Report Count (3), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ |
| 0x09, 0x20, /* Usage (20h), */ |
| 0x15, 0x00, /* Logical Minimum (0), */ |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x31, /* Report Count (51), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x21, /* Usage (21h), */ |
| 0x75, 0x08, /* Report Size (8), */ |
| 0x95, 0x4D, /* Report Count (77), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x12, /* Report ID (18), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x8D, /* Report Count (141), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x23, /* Usage (23h), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x13, /* Report ID (19), */ |
| 0x09, 0x24, /* Usage (24h), */ |
| 0x95, 0xCD, /* Report Count (205), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x25, /* Usage (25h), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x14, /* Report ID (20), */ |
| 0x09, 0x26, /* Usage (26h), */ |
| 0x96, 0x0D, 0x01, /* Report Count (269), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x27, /* Usage (27h), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x15, /* Report ID (21), */ |
| 0x09, 0x28, /* Usage (28h), */ |
| 0x96, 0x4D, 0x01, /* Report Count (333), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x29, /* Usage (29h), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x16, /* Report ID (22), */ |
| 0x09, 0x2A, /* Usage (2Ah), */ |
| 0x96, 0x8D, 0x01, /* Report Count (397), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x2B, /* Usage (2Bh), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x17, /* Report ID (23), */ |
| 0x09, 0x2C, /* Usage (2Ch), */ |
| 0x96, 0xCD, 0x01, /* Report Count (461), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x2D, /* Usage (2Dh), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x18, /* Report ID (24), */ |
| 0x09, 0x2E, /* Usage (2Eh), */ |
| 0x96, 0x0D, 0x02, /* Report Count (525), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x2F, /* Usage (2Fh), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x85, 0x19, /* Report ID (25), */ |
| 0x09, 0x30, /* Usage (30h), */ |
| 0x96, 0x22, 0x02, /* Report Count (546), */ |
| 0x81, 0x02, /* Input (Variable), */ |
| 0x09, 0x31, /* Usage (31h), */ |
| 0x91, 0x02, /* Output (Variable), */ |
| 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */ |
| 0x85, 0x82, /* Report ID (130), */ |
| 0x09, 0x22, /* Usage (22h), */ |
| 0x95, 0x3F, /* Report Count (63), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x83, /* Report ID (131), */ |
| 0x09, 0x23, /* Usage (23h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x84, /* Report ID (132), */ |
| 0x09, 0x24, /* Usage (24h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x90, /* Report ID (144), */ |
| 0x09, 0x30, /* Usage (30h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x91, /* Report ID (145), */ |
| 0x09, 0x31, /* Usage (31h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x92, /* Report ID (146), */ |
| 0x09, 0x32, /* Usage (32h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0x93, /* Report ID (147), */ |
| 0x09, 0x33, /* Usage (33h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA0, /* Report ID (160), */ |
| 0x09, 0x40, /* Usage (40h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0x85, 0xA4, /* Report ID (164), */ |
| 0x09, 0x44, /* Usage (44h), */ |
| 0xB1, 0x02, /* Feature (Variable), */ |
| 0xC0 /* End Collection */ |
| }; |
| |
| static __u8 ps3remote_rdesc[] = { |
| 0x05, 0x01, /* GUsagePage Generic Desktop */ |
| 0x09, 0x05, /* LUsage 0x05 [Game Pad] */ |
| 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */ |
| |
| /* Use collection 1 for joypad buttons */ |
| 0xA1, 0x02, /* MCollection Logical (interrelated data) */ |
| |
| /* Ignore the 1st byte, maybe it is used for a controller |
| * number but it's not needed for correct operation */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ |
| |
| /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these |
| * buttons multiple keypresses are allowed */ |
| 0x05, 0x09, /* GUsagePage Button */ |
| 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */ |
| 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */ |
| 0x75, 0x01, /* GReportSize 0x01 [1] */ |
| 0x95, 0x18, /* GReportCount 0x18 [24] */ |
| 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ |
| |
| 0xC0, /* MEndCollection */ |
| |
| /* Use collection 2 for remote control buttons */ |
| 0xA1, 0x02, /* MCollection Logical (interrelated data) */ |
| |
| /* 5th byte is used for remote control buttons */ |
| 0x05, 0x09, /* GUsagePage Button */ |
| 0x18, /* LUsageMinimum [No button pressed] */ |
| 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x80, /* MInput */ |
| |
| /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at |
| * 0xff and 11th is for press indication */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x06, /* GReportCount 0x06 [6] */ |
| 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ |
| |
| /* 12th byte is for battery strength */ |
| 0x05, 0x06, /* GUsagePage Generic Device Controls */ |
| 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ |
| |
| 0xC0, /* MEndCollection */ |
| |
| 0xC0 /* MEndCollection [Game Pad] */ |
| }; |
| |
| static const unsigned int ps3remote_keymap_joypad_buttons[] = { |
| [0x01] = KEY_SELECT, |
| [0x02] = BTN_THUMBL, /* L3 */ |
| [0x03] = BTN_THUMBR, /* R3 */ |
| [0x04] = BTN_START, |
| [0x05] = KEY_UP, |
| [0x06] = KEY_RIGHT, |
| [0x07] = KEY_DOWN, |
| [0x08] = KEY_LEFT, |
| [0x09] = BTN_TL2, /* L2 */ |
| [0x0a] = BTN_TR2, /* R2 */ |
| [0x0b] = BTN_TL, /* L1 */ |
| [0x0c] = BTN_TR, /* R1 */ |
| [0x0d] = KEY_OPTION, /* options/triangle */ |
| [0x0e] = KEY_BACK, /* back/circle */ |
| [0x0f] = BTN_0, /* cross */ |
| [0x10] = KEY_SCREEN, /* view/square */ |
| [0x11] = KEY_HOMEPAGE, /* PS button */ |
| [0x14] = KEY_ENTER, |
| }; |
| static const unsigned int ps3remote_keymap_remote_buttons[] = { |
| [0x00] = KEY_1, |
| [0x01] = KEY_2, |
| [0x02] = KEY_3, |
| [0x03] = KEY_4, |
| [0x04] = KEY_5, |
| [0x05] = KEY_6, |
| [0x06] = KEY_7, |
| [0x07] = KEY_8, |
| [0x08] = KEY_9, |
| [0x09] = KEY_0, |
| [0x0e] = KEY_ESC, /* return */ |
| [0x0f] = KEY_CLEAR, |
| [0x16] = KEY_EJECTCD, |
| [0x1a] = KEY_MENU, /* top menu */ |
| [0x28] = KEY_TIME, |
| [0x30] = KEY_PREVIOUS, |
| [0x31] = KEY_NEXT, |
| [0x32] = KEY_PLAY, |
| [0x33] = KEY_REWIND, /* scan back */ |
| [0x34] = KEY_FORWARD, /* scan forward */ |
| [0x38] = KEY_STOP, |
| [0x39] = KEY_PAUSE, |
| [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */ |
| [0x60] = KEY_FRAMEBACK, /* slow/step back */ |
| [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */ |
| [0x63] = KEY_SUBTITLE, |
| [0x64] = KEY_AUDIO, |
| [0x65] = KEY_ANGLE, |
| [0x70] = KEY_INFO, /* display */ |
| [0x80] = KEY_BLUE, |
| [0x81] = KEY_RED, |
| [0x82] = KEY_GREEN, |
| [0x83] = KEY_YELLOW, |
| }; |
| |
| static const unsigned int buzz_keymap[] = { |
| /* |
| * The controller has 4 remote buzzers, each with one LED and 5 |
| * buttons. |
| * |
| * We use the mapping chosen by the controller, which is: |
| * |
| * Key Offset |
| * ------------------- |
| * Buzz 1 |
| * Blue 5 |
| * Orange 4 |
| * Green 3 |
| * Yellow 2 |
| * |
| * So, for example, the orange button on the third buzzer is mapped to |
| * BTN_TRIGGER_HAPPY14 |
| */ |
| [ 1] = BTN_TRIGGER_HAPPY1, |
| [ 2] = BTN_TRIGGER_HAPPY2, |
| [ 3] = BTN_TRIGGER_HAPPY3, |
| [ 4] = BTN_TRIGGER_HAPPY4, |
| [ 5] = BTN_TRIGGER_HAPPY5, |
| [ 6] = BTN_TRIGGER_HAPPY6, |
| [ 7] = BTN_TRIGGER_HAPPY7, |
| [ 8] = BTN_TRIGGER_HAPPY8, |
| [ 9] = BTN_TRIGGER_HAPPY9, |
| [10] = BTN_TRIGGER_HAPPY10, |
| [11] = BTN_TRIGGER_HAPPY11, |
| [12] = BTN_TRIGGER_HAPPY12, |
| [13] = BTN_TRIGGER_HAPPY13, |
| [14] = BTN_TRIGGER_HAPPY14, |
| [15] = BTN_TRIGGER_HAPPY15, |
| [16] = BTN_TRIGGER_HAPPY16, |
| [17] = BTN_TRIGGER_HAPPY17, |
| [18] = BTN_TRIGGER_HAPPY18, |
| [19] = BTN_TRIGGER_HAPPY19, |
| [20] = BTN_TRIGGER_HAPPY20, |
| }; |
| |
| static enum power_supply_property sony_battery_props[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_SCOPE, |
| POWER_SUPPLY_PROP_STATUS, |
| }; |
| |
| static spinlock_t sony_dev_list_lock; |
| static LIST_HEAD(sony_device_list); |
| |
| struct sony_sc { |
| spinlock_t lock; |
| struct list_head list_node; |
| struct hid_device *hdev; |
| struct led_classdev *leds[MAX_LEDS]; |
| unsigned long quirks; |
| struct work_struct state_worker; |
| struct power_supply battery; |
| |
| #ifdef CONFIG_SONY_FF |
| __u8 left; |
| __u8 right; |
| #endif |
| |
| __u8 mac_address[6]; |
| __u8 worker_initialized; |
| __u8 cable_state; |
| __u8 battery_charging; |
| __u8 battery_capacity; |
| __u8 led_state[MAX_LEDS]; |
| __u8 led_count; |
| }; |
| |
| static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc, |
| unsigned int *rsize) |
| { |
| *rsize = sizeof(ps3remote_rdesc); |
| return ps3remote_rdesc; |
| } |
| |
| static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| unsigned int key = usage->hid & HID_USAGE; |
| |
| if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) |
| return -1; |
| |
| switch (usage->collection_index) { |
| case 1: |
| if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons)) |
| return -1; |
| |
| key = ps3remote_keymap_joypad_buttons[key]; |
| if (!key) |
| return -1; |
| break; |
| case 2: |
| if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons)) |
| return -1; |
| |
| key = ps3remote_keymap_remote_buttons[key]; |
| if (!key) |
| return -1; |
| break; |
| default: |
| return -1; |
| } |
| |
| hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); |
| return 1; |
| } |
| |
| |
| /* Sony Vaio VGX has wrongly mouse pointer declared as constant */ |
| static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, |
| unsigned int *rsize) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| /* |
| * Some Sony RF receivers wrongly declare the mouse pointer as a |
| * a constant non-data variable. |
| */ |
| if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 && |
| /* usage page: generic desktop controls */ |
| /* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */ |
| /* usage: mouse */ |
| rdesc[2] == 0x09 && rdesc[3] == 0x02 && |
| /* input (usage page for x,y axes): constant, variable, relative */ |
| rdesc[54] == 0x81 && rdesc[55] == 0x07) { |
| hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n"); |
| /* input: data, variable, relative */ |
| rdesc[55] = 0x06; |
| } |
| |
| /* |
| * The default Dualshock 4 USB descriptor doesn't assign |
| * the gyroscope values to corresponding axes so we need a |
| * modified one. |
| */ |
| if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && *rsize == 467) { |
| hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n"); |
| rdesc = dualshock4_usb_rdesc; |
| *rsize = sizeof(dualshock4_usb_rdesc); |
| } else if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && *rsize == 357) { |
| hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n"); |
| rdesc = dualshock4_bt_rdesc; |
| *rsize = sizeof(dualshock4_bt_rdesc); |
| } |
| |
| /* The HID descriptor exposed over BT has a trailing zero byte */ |
| if ((((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize == 148) || |
| ((sc->quirks & SIXAXIS_CONTROLLER_BT) && *rsize == 149)) && |
| rdesc[83] == 0x75) { |
| hid_info(hdev, "Fixing up Sony Sixaxis report descriptor\n"); |
| memcpy((void *)&rdesc[83], (void *)&sixaxis_rdesc_fixup, |
| sizeof(sixaxis_rdesc_fixup)); |
| } else if (sc->quirks & SIXAXIS_CONTROLLER_USB && |
| *rsize > sizeof(sixaxis_rdesc_fixup2)) { |
| hid_info(hdev, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n", |
| *rsize, (int)sizeof(sixaxis_rdesc_fixup2)); |
| *rsize = sizeof(sixaxis_rdesc_fixup2); |
| memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize); |
| } |
| |
| if (sc->quirks & PS3REMOTE) |
| return ps3remote_fixup(hdev, rdesc, rsize); |
| |
| return rdesc; |
| } |
| |
| static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size) |
| { |
| static const __u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 }; |
| unsigned long flags; |
| __u8 cable_state, battery_capacity, battery_charging; |
| |
| /* |
| * The sixaxis is charging if the battery value is 0xee |
| * and it is fully charged if the value is 0xef. |
| * It does not report the actual level while charging so it |
| * is set to 100% while charging is in progress. |
| */ |
| if (rd[30] >= 0xee) { |
| battery_capacity = 100; |
| battery_charging = !(rd[30] & 0x01); |
| } else { |
| __u8 index = rd[30] <= 5 ? rd[30] : 5; |
| battery_capacity = sixaxis_battery_capacity[index]; |
| battery_charging = 0; |
| } |
| cable_state = !(rd[31] & 0x04); |
| |
| spin_lock_irqsave(&sc->lock, flags); |
| sc->cable_state = cable_state; |
| sc->battery_capacity = battery_capacity; |
| sc->battery_charging = battery_charging; |
| spin_unlock_irqrestore(&sc->lock, flags); |
| } |
| |
| static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size) |
| { |
| struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, |
| struct hid_input, list); |
| struct input_dev *input_dev = hidinput->input; |
| unsigned long flags; |
| int n, offset; |
| __u8 cable_state, battery_capacity, battery_charging; |
| |
| /* |
| * Battery and touchpad data starts at byte 30 in the USB report and |
| * 32 in Bluetooth report. |
| */ |
| offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32; |
| |
| /* |
| * The lower 4 bits of byte 30 contain the battery level |
| * and the 5th bit contains the USB cable state. |
| */ |
| cable_state = (rd[offset] >> 4) & 0x01; |
| battery_capacity = rd[offset] & 0x0F; |
| |
| /* |
| * When a USB power source is connected the battery level ranges from |
| * 0 to 10, and when running on battery power it ranges from 0 to 9. |
| * A battery level above 10 when plugged in means charge completed. |
| */ |
| if (!cable_state || battery_capacity > 10) |
| battery_charging = 0; |
| else |
| battery_charging = 1; |
| |
| if (!cable_state) |
| battery_capacity++; |
| if (battery_capacity > 10) |
| battery_capacity = 10; |
| |
| battery_capacity *= 10; |
| |
| spin_lock_irqsave(&sc->lock, flags); |
| sc->cable_state = cable_state; |
| sc->battery_capacity = battery_capacity; |
| sc->battery_charging = battery_charging; |
| spin_unlock_irqrestore(&sc->lock, flags); |
| |
| offset += 5; |
| |
| /* |
| * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB |
| * and 37 on Bluetooth. |
| * The first 7 bits of the first byte is a counter and bit 8 is a touch |
| * indicator that is 0 when pressed and 1 when not pressed. |
| * The next 3 bytes are two 12 bit touch coordinates, X and Y. |
| * The data for the second touch is in the same format and immediatly |
| * follows the data for the first. |
| */ |
| for (n = 0; n < 2; n++) { |
| __u16 x, y; |
| |
| x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8); |
| y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4); |
| |
| input_mt_slot(input_dev, n); |
| input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, |
| !(rd[offset] >> 7)); |
| input_report_abs(input_dev, ABS_MT_POSITION_X, x); |
| input_report_abs(input_dev, ABS_MT_POSITION_Y, y); |
| |
| offset += 4; |
| } |
| } |
| |
| static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, |
| __u8 *rd, int size) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| /* |
| * Sixaxis HID report has acclerometers/gyro with MSByte first, this |
| * has to be BYTE_SWAPPED before passing up to joystick interface |
| */ |
| if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) { |
| swap(rd[41], rd[42]); |
| swap(rd[43], rd[44]); |
| swap(rd[45], rd[46]); |
| swap(rd[47], rd[48]); |
| |
| sixaxis_parse_report(sc, rd, size); |
| } else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 && |
| size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) |
| && rd[0] == 0x11 && size == 78)) { |
| dualshock4_parse_report(sc, rd, size); |
| } |
| |
| return 0; |
| } |
| |
| static int sony_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| if (sc->quirks & BUZZ_CONTROLLER) { |
| unsigned int key = usage->hid & HID_USAGE; |
| |
| if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) |
| return -1; |
| |
| switch (usage->collection_index) { |
| case 1: |
| if (key >= ARRAY_SIZE(buzz_keymap)) |
| return -1; |
| |
| key = buzz_keymap[key]; |
| if (!key) |
| return -1; |
| break; |
| default: |
| return -1; |
| } |
| |
| hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); |
| return 1; |
| } |
| |
| if (sc->quirks & PS3REMOTE) |
| return ps3remote_mapping(hdev, hi, field, usage, bit, max); |
| |
| /* Let hid-core decide for the others */ |
| return 0; |
| } |
| |
| /* |
| * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller |
| * to "operational". Without this, the ps3 controller will not report any |
| * events. |
| */ |
| static int sixaxis_set_operational_usb(struct hid_device *hdev) |
| { |
| int ret; |
| char *buf = kmalloc(18, GFP_KERNEL); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = hid_hw_raw_request(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT, |
| HID_REQ_GET_REPORT); |
| |
| if (ret < 0) |
| hid_err(hdev, "can't set operational mode\n"); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static int sixaxis_set_operational_bt(struct hid_device *hdev) |
| { |
| unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 }; |
| return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| } |
| |
| /* |
| * Requesting feature report 0x02 in Bluetooth mode changes the state of the |
| * controller so that it sends full input reports of type 0x11. |
| */ |
| static int dualshock4_set_operational_bt(struct hid_device *hdev) |
| { |
| __u8 buf[37] = { 0 }; |
| |
| return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_GET_REPORT); |
| } |
| |
| static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds) |
| { |
| struct list_head *report_list = |
| &hdev->report_enum[HID_OUTPUT_REPORT].report_list; |
| struct hid_report *report = list_entry(report_list->next, |
| struct hid_report, list); |
| __s32 *value = report->field[0]->value; |
| |
| value[0] = 0x00; |
| value[1] = leds[0] ? 0xff : 0x00; |
| value[2] = leds[1] ? 0xff : 0x00; |
| value[3] = leds[2] ? 0xff : 0x00; |
| value[4] = leds[3] ? 0xff : 0x00; |
| value[5] = 0x00; |
| value[6] = 0x00; |
| hid_hw_request(hdev, report, HID_REQ_SET_REPORT); |
| } |
| |
| static void sony_set_leds(struct hid_device *hdev, const __u8 *leds, int count) |
| { |
| struct sony_sc *drv_data = hid_get_drvdata(hdev); |
| int n; |
| |
| BUG_ON(count > MAX_LEDS); |
| |
| if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) { |
| buzz_set_leds(hdev, leds); |
| } else { |
| for (n = 0; n < count; n++) |
| drv_data->led_state[n] = leds[n]; |
| schedule_work(&drv_data->state_worker); |
| } |
| } |
| |
| static void sony_led_set_brightness(struct led_classdev *led, |
| enum led_brightness value) |
| { |
| struct device *dev = led->dev->parent; |
| struct hid_device *hdev = container_of(dev, struct hid_device, dev); |
| struct sony_sc *drv_data; |
| |
| int n; |
| |
| drv_data = hid_get_drvdata(hdev); |
| if (!drv_data) { |
| hid_err(hdev, "No device data\n"); |
| return; |
| } |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| if (led == drv_data->leds[n]) { |
| if (value != drv_data->led_state[n]) { |
| drv_data->led_state[n] = value; |
| sony_set_leds(hdev, drv_data->led_state, drv_data->led_count); |
| } |
| break; |
| } |
| } |
| } |
| |
| static enum led_brightness sony_led_get_brightness(struct led_classdev *led) |
| { |
| struct device *dev = led->dev->parent; |
| struct hid_device *hdev = container_of(dev, struct hid_device, dev); |
| struct sony_sc *drv_data; |
| |
| int n; |
| |
| drv_data = hid_get_drvdata(hdev); |
| if (!drv_data) { |
| hid_err(hdev, "No device data\n"); |
| return LED_OFF; |
| } |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| if (led == drv_data->leds[n]) |
| return drv_data->led_state[n]; |
| } |
| |
| return LED_OFF; |
| } |
| |
| static void sony_leds_remove(struct hid_device *hdev) |
| { |
| struct sony_sc *drv_data; |
| struct led_classdev *led; |
| int n; |
| |
| drv_data = hid_get_drvdata(hdev); |
| BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT)); |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| led = drv_data->leds[n]; |
| drv_data->leds[n] = NULL; |
| if (!led) |
| continue; |
| led_classdev_unregister(led); |
| kfree(led); |
| } |
| |
| drv_data->led_count = 0; |
| } |
| |
| static int sony_leds_init(struct hid_device *hdev) |
| { |
| struct sony_sc *drv_data; |
| int n, ret = 0; |
| int max_brightness; |
| int use_colors; |
| struct led_classdev *led; |
| size_t name_sz; |
| char *name; |
| size_t name_len; |
| const char *name_fmt; |
| static const char * const color_str[] = { "red", "green", "blue" }; |
| static const __u8 initial_values[MAX_LEDS] = { 0x00, 0x00, 0x00, 0x00 }; |
| |
| drv_data = hid_get_drvdata(hdev); |
| BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT)); |
| |
| if (drv_data->quirks & BUZZ_CONTROLLER) { |
| drv_data->led_count = 4; |
| max_brightness = 1; |
| use_colors = 0; |
| name_len = strlen("::buzz#"); |
| name_fmt = "%s::buzz%d"; |
| /* Validate expected report characteristics. */ |
| if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7)) |
| return -ENODEV; |
| } else if (drv_data->quirks & DUALSHOCK4_CONTROLLER) { |
| drv_data->led_count = 3; |
| max_brightness = 255; |
| use_colors = 1; |
| name_len = 0; |
| name_fmt = "%s:%s"; |
| } else { |
| drv_data->led_count = 4; |
| max_brightness = 1; |
| use_colors = 0; |
| name_len = strlen("::sony#"); |
| name_fmt = "%s::sony%d"; |
| } |
| |
| /* |
| * Clear LEDs as we have no way of reading their initial state. This is |
| * only relevant if the driver is loaded after somebody actively set the |
| * LEDs to on |
| */ |
| sony_set_leds(hdev, initial_values, drv_data->led_count); |
| |
| name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1; |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| |
| if (use_colors) |
| name_sz = strlen(dev_name(&hdev->dev)) + strlen(color_str[n]) + 2; |
| |
| led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL); |
| if (!led) { |
| hid_err(hdev, "Couldn't allocate memory for LED %d\n", n); |
| ret = -ENOMEM; |
| goto error_leds; |
| } |
| |
| name = (void *)(&led[1]); |
| if (use_colors) |
| snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), color_str[n]); |
| else |
| snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1); |
| led->name = name; |
| led->brightness = 0; |
| led->max_brightness = max_brightness; |
| led->brightness_get = sony_led_get_brightness; |
| led->brightness_set = sony_led_set_brightness; |
| |
| ret = led_classdev_register(&hdev->dev, led); |
| if (ret) { |
| hid_err(hdev, "Failed to register LED %d\n", n); |
| kfree(led); |
| goto error_leds; |
| } |
| |
| drv_data->leds[n] = led; |
| } |
| |
| return ret; |
| |
| error_leds: |
| sony_leds_remove(hdev); |
| |
| return ret; |
| } |
| |
| static void sixaxis_state_worker(struct work_struct *work) |
| { |
| struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); |
| unsigned char buf[] = { |
| 0x01, |
| 0x00, 0xff, 0x00, 0xff, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| #ifdef CONFIG_SONY_FF |
| buf[3] = sc->right ? 1 : 0; |
| buf[5] = sc->left; |
| #endif |
| |
| buf[10] |= sc->led_state[0] << 1; |
| buf[10] |= sc->led_state[1] << 2; |
| buf[10] |= sc->led_state[2] << 3; |
| buf[10] |= sc->led_state[3] << 4; |
| |
| hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT, |
| HID_REQ_SET_REPORT); |
| } |
| |
| static void dualshock4_state_worker(struct work_struct *work) |
| { |
| struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); |
| struct hid_device *hdev = sc->hdev; |
| int offset; |
| |
| __u8 buf[78] = { 0 }; |
| |
| if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) { |
| buf[0] = 0x05; |
| buf[1] = 0x03; |
| offset = 4; |
| } else { |
| buf[0] = 0x11; |
| buf[1] = 0xB0; |
| buf[3] = 0x0F; |
| offset = 6; |
| } |
| |
| #ifdef CONFIG_SONY_FF |
| buf[offset++] = sc->right; |
| buf[offset++] = sc->left; |
| #else |
| offset += 2; |
| #endif |
| |
| buf[offset++] = sc->led_state[0]; |
| buf[offset++] = sc->led_state[1]; |
| buf[offset++] = sc->led_state[2]; |
| |
| if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) |
| hid_hw_output_report(hdev, buf, 32); |
| else |
| hid_hw_raw_request(hdev, 0x11, buf, 78, |
| HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); |
| } |
| |
| #ifdef CONFIG_SONY_FF |
| static int sony_play_effect(struct input_dev *dev, void *data, |
| struct ff_effect *effect) |
| { |
| struct hid_device *hid = input_get_drvdata(dev); |
| struct sony_sc *sc = hid_get_drvdata(hid); |
| |
| if (effect->type != FF_RUMBLE) |
| return 0; |
| |
| sc->left = effect->u.rumble.strong_magnitude / 256; |
| sc->right = effect->u.rumble.weak_magnitude / 256; |
| |
| schedule_work(&sc->state_worker); |
| return 0; |
| } |
| |
| static int sony_init_ff(struct hid_device *hdev) |
| { |
| struct hid_input *hidinput = list_entry(hdev->inputs.next, |
| struct hid_input, list); |
| struct input_dev *input_dev = hidinput->input; |
| |
| input_set_capability(input_dev, EV_FF, FF_RUMBLE); |
| return input_ff_create_memless(input_dev, NULL, sony_play_effect); |
| } |
| |
| #else |
| static int sony_init_ff(struct hid_device *hdev) |
| { |
| return 0; |
| } |
| |
| #endif |
| |
| static int sony_battery_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct sony_sc *sc = container_of(psy, struct sony_sc, battery); |
| unsigned long flags; |
| int ret = 0; |
| u8 battery_charging, battery_capacity, cable_state; |
| |
| spin_lock_irqsave(&sc->lock, flags); |
| battery_charging = sc->battery_charging; |
| battery_capacity = sc->battery_capacity; |
| cable_state = sc->cable_state; |
| spin_unlock_irqrestore(&sc->lock, flags); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = 1; |
| break; |
| case POWER_SUPPLY_PROP_SCOPE: |
| val->intval = POWER_SUPPLY_SCOPE_DEVICE; |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = battery_capacity; |
| break; |
| case POWER_SUPPLY_PROP_STATUS: |
| if (battery_charging) |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| else |
| if (battery_capacity == 100 && cable_state) |
| val->intval = POWER_SUPPLY_STATUS_FULL; |
| else |
| val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int sony_battery_probe(struct sony_sc *sc) |
| { |
| static atomic_t power_id_seq = ATOMIC_INIT(0); |
| unsigned long power_id; |
| struct hid_device *hdev = sc->hdev; |
| int ret; |
| |
| /* |
| * Set the default battery level to 100% to avoid low battery warnings |
| * if the battery is polled before the first device report is received. |
| */ |
| sc->battery_capacity = 100; |
| |
| power_id = (unsigned long)atomic_inc_return(&power_id_seq); |
| |
| sc->battery.properties = sony_battery_props; |
| sc->battery.num_properties = ARRAY_SIZE(sony_battery_props); |
| sc->battery.get_property = sony_battery_get_property; |
| sc->battery.type = POWER_SUPPLY_TYPE_BATTERY; |
| sc->battery.use_for_apm = 0; |
| sc->battery.name = kasprintf(GFP_KERNEL, "sony_controller_battery_%lu", |
| power_id); |
| if (!sc->battery.name) |
| return -ENOMEM; |
| |
| ret = power_supply_register(&hdev->dev, &sc->battery); |
| if (ret) { |
| hid_err(hdev, "Unable to register battery device\n"); |
| goto err_free; |
| } |
| |
| power_supply_powers(&sc->battery, &hdev->dev); |
| return 0; |
| |
| err_free: |
| kfree(sc->battery.name); |
| sc->battery.name = NULL; |
| return ret; |
| } |
| |
| static void sony_battery_remove(struct sony_sc *sc) |
| { |
| if (!sc->battery.name) |
| return; |
| |
| power_supply_unregister(&sc->battery); |
| kfree(sc->battery.name); |
| sc->battery.name = NULL; |
| } |
| |
| static int sony_register_touchpad(struct sony_sc *sc, int touch_count, |
| int w, int h) |
| { |
| struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, |
| struct hid_input, list); |
| struct input_dev *input_dev = hidinput->input; |
| int ret; |
| |
| ret = input_mt_init_slots(input_dev, touch_count, 0); |
| if (ret < 0) { |
| hid_err(sc->hdev, "Unable to initialize multi-touch slots\n"); |
| return ret; |
| } |
| |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, w, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, h, 0, 0); |
| |
| return 0; |
| } |
| |
| /* |
| * If a controller is plugged in via USB while already connected via Bluetooth |
| * it will show up as two devices. A global list of connected controllers and |
| * their MAC addresses is maintained to ensure that a device is only connected |
| * once. |
| */ |
| static int sony_check_add_dev_list(struct sony_sc *sc) |
| { |
| struct sony_sc *entry; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&sony_dev_list_lock, flags); |
| |
| list_for_each_entry(entry, &sony_device_list, list_node) { |
| ret = memcmp(sc->mac_address, entry->mac_address, |
| sizeof(sc->mac_address)); |
| if (!ret) { |
| ret = -EEXIST; |
| hid_info(sc->hdev, "controller with MAC address %pMR already connected\n", |
| sc->mac_address); |
| goto unlock; |
| } |
| } |
| |
| ret = 0; |
| list_add(&(sc->list_node), &sony_device_list); |
| |
| unlock: |
| spin_unlock_irqrestore(&sony_dev_list_lock, flags); |
| return ret; |
| } |
| |
| static void sony_remove_dev_list(struct sony_sc *sc) |
| { |
| unsigned long flags; |
| |
| if (sc->list_node.next) { |
| spin_lock_irqsave(&sony_dev_list_lock, flags); |
| list_del(&(sc->list_node)); |
| spin_unlock_irqrestore(&sony_dev_list_lock, flags); |
| } |
| } |
| |
| static int sony_get_bt_devaddr(struct sony_sc *sc) |
| { |
| int ret; |
| |
| /* HIDP stores the device MAC address as a string in the uniq field. */ |
| ret = strlen(sc->hdev->uniq); |
| if (ret != 17) |
| return -EINVAL; |
| |
| ret = sscanf(sc->hdev->uniq, |
| "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", |
| &sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3], |
| &sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]); |
| |
| if (ret != 6) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int sony_check_add(struct sony_sc *sc) |
| { |
| int n, ret; |
| |
| if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) || |
| (sc->quirks & SIXAXIS_CONTROLLER_BT)) { |
| /* |
| * sony_get_bt_devaddr() attempts to parse the Bluetooth MAC |
| * address from the uniq string where HIDP stores it. |
| * As uniq cannot be guaranteed to be a MAC address in all cases |
| * a failure of this function should not prevent the connection. |
| */ |
| if (sony_get_bt_devaddr(sc) < 0) { |
| hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n"); |
| return 0; |
| } |
| } else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) { |
| __u8 buf[7]; |
| |
| /* |
| * The MAC address of a DS4 controller connected via USB can be |
| * retrieved with feature report 0x81. The address begins at |
| * offset 1. |
| */ |
| ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_GET_REPORT); |
| |
| if (ret != 7) { |
| hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n"); |
| return ret < 0 ? ret : -EINVAL; |
| } |
| |
| memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address)); |
| } else if (sc->quirks & SIXAXIS_CONTROLLER_USB) { |
| __u8 buf[18]; |
| |
| /* |
| * The MAC address of a Sixaxis controller connected via USB can |
| * be retrieved with feature report 0xf2. The address begins at |
| * offset 4. |
| */ |
| ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_GET_REPORT); |
| |
| if (ret != 18) { |
| hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n"); |
| return ret < 0 ? ret : -EINVAL; |
| } |
| |
| /* |
| * The Sixaxis device MAC in the report is big-endian and must |
| * be byte-swapped. |
| */ |
| for (n = 0; n < 6; n++) |
| sc->mac_address[5-n] = buf[4+n]; |
| } else { |
| return 0; |
| } |
| |
| return sony_check_add_dev_list(sc); |
| } |
| |
| |
| static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| int ret; |
| unsigned long quirks = id->driver_data; |
| struct sony_sc *sc; |
| unsigned int connect_mask = HID_CONNECT_DEFAULT; |
| |
| sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL); |
| if (sc == NULL) { |
| hid_err(hdev, "can't alloc sony descriptor\n"); |
| return -ENOMEM; |
| } |
| |
| sc->quirks = quirks; |
| hid_set_drvdata(hdev, sc); |
| sc->hdev = hdev; |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| hid_err(hdev, "parse failed\n"); |
| return ret; |
| } |
| |
| if (sc->quirks & VAIO_RDESC_CONSTANT) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| else if (sc->quirks & SIXAXIS_CONTROLLER_USB) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| else if (sc->quirks & SIXAXIS_CONTROLLER_BT) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| |
| ret = hid_hw_start(hdev, connect_mask); |
| if (ret) { |
| hid_err(hdev, "hw start failed\n"); |
| return ret; |
| } |
| |
| if (sc->quirks & SIXAXIS_CONTROLLER_USB) { |
| /* |
| * The Sony Sixaxis does not handle HID Output Reports on the |
| * Interrupt EP like it could, so we need to force HID Output |
| * Reports to use HID_REQ_SET_REPORT on the Control EP. |
| * |
| * There is also another issue about HID Output Reports via USB, |
| * the Sixaxis does not want the report_id as part of the data |
| * packet, so we have to discard buf[0] when sending the actual |
| * control message, even for numbered reports, humpf! |
| */ |
| hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; |
| hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID; |
| ret = sixaxis_set_operational_usb(hdev); |
| sc->worker_initialized = 1; |
| INIT_WORK(&sc->state_worker, sixaxis_state_worker); |
| } else if (sc->quirks & SIXAXIS_CONTROLLER_BT) { |
| /* |
| * The Sixaxis wants output reports sent on the ctrl endpoint |
| * when connected via Bluetooth. |
| */ |
| hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; |
| ret = sixaxis_set_operational_bt(hdev); |
| sc->worker_initialized = 1; |
| INIT_WORK(&sc->state_worker, sixaxis_state_worker); |
| } else if (sc->quirks & DUALSHOCK4_CONTROLLER) { |
| if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) { |
| /* |
| * The DualShock 4 wants output reports sent on the ctrl |
| * endpoint when connected via Bluetooth. |
| */ |
| hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; |
| ret = dualshock4_set_operational_bt(hdev); |
| if (ret < 0) { |
| hid_err(hdev, "failed to set the Dualshock 4 operational mode\n"); |
| goto err_stop; |
| } |
| } |
| /* |
| * The Dualshock 4 touchpad supports 2 touches and has a |
| * resolution of 1920x940. |
| */ |
| ret = sony_register_touchpad(sc, 2, 1920, 940); |
| if (ret < 0) |
| goto err_stop; |
| |
| sc->worker_initialized = 1; |
| INIT_WORK(&sc->state_worker, dualshock4_state_worker); |
| } else { |
| ret = 0; |
| } |
| |
| if (ret < 0) |
| goto err_stop; |
| |
| ret = sony_check_add(sc); |
| if (ret < 0) |
| goto err_stop; |
| |
| if (sc->quirks & SONY_LED_SUPPORT) { |
| ret = sony_leds_init(hdev); |
| if (ret < 0) |
| goto err_stop; |
| } |
| |
| if (sc->quirks & SONY_BATTERY_SUPPORT) { |
| ret = sony_battery_probe(sc); |
| if (ret < 0) |
| goto err_stop; |
| |
| /* Open the device to receive reports with battery info */ |
| ret = hid_hw_open(hdev); |
| if (ret < 0) { |
| hid_err(hdev, "hw open failed\n"); |
| goto err_stop; |
| } |
| } |
| |
| if (sc->quirks & SONY_FF_SUPPORT) { |
| ret = sony_init_ff(hdev); |
| if (ret < 0) |
| goto err_close; |
| } |
| |
| return 0; |
| err_close: |
| hid_hw_close(hdev); |
| err_stop: |
| if (sc->quirks & SONY_LED_SUPPORT) |
| sony_leds_remove(hdev); |
| if (sc->quirks & SONY_BATTERY_SUPPORT) |
| sony_battery_remove(sc); |
| if (sc->worker_initialized) |
| cancel_work_sync(&sc->state_worker); |
| sony_remove_dev_list(sc); |
| hid_hw_stop(hdev); |
| return ret; |
| } |
| |
| static void sony_remove(struct hid_device *hdev) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| if (sc->quirks & SONY_LED_SUPPORT) |
| sony_leds_remove(hdev); |
| |
| if (sc->quirks & SONY_BATTERY_SUPPORT) { |
| hid_hw_close(hdev); |
| sony_battery_remove(sc); |
| } |
| |
| if (sc->worker_initialized) |
| cancel_work_sync(&sc->state_worker); |
| |
| sony_remove_dev_list(sc); |
| |
| hid_hw_stop(hdev); |
| } |
| |
| static const struct hid_device_id sony_devices[] = { |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_USB }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_USB }, |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_BT }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), |
| .driver_data = VAIO_RDESC_CONSTANT }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE), |
| .driver_data = VAIO_RDESC_CONSTANT }, |
| /* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as |
| * Logitech joystick from the device descriptor. */ |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER), |
| .driver_data = BUZZ_CONTROLLER }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER), |
| .driver_data = BUZZ_CONTROLLER }, |
| /* PS3 BD Remote Control */ |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE), |
| .driver_data = PS3REMOTE }, |
| /* Logitech Harmony Adapter for PS3 */ |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3), |
| .driver_data = PS3REMOTE }, |
| /* Sony Dualshock 4 controllers for PS4 */ |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), |
| .driver_data = DUALSHOCK4_CONTROLLER_USB }, |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), |
| .driver_data = DUALSHOCK4_CONTROLLER_BT }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, sony_devices); |
| |
| static struct hid_driver sony_driver = { |
| .name = "sony", |
| .id_table = sony_devices, |
| .input_mapping = sony_mapping, |
| .probe = sony_probe, |
| .remove = sony_remove, |
| .report_fixup = sony_report_fixup, |
| .raw_event = sony_raw_event |
| }; |
| module_hid_driver(sony_driver); |
| |
| MODULE_LICENSE("GPL"); |