| /* |
| * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver |
| * |
| * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Documentation: ARM DDI 0173B |
| */ |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/amba/bus.h> |
| #include <linux/io.h> |
| |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/ac97_codec.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| |
| #include "aaci.h" |
| |
| #define DRIVER_NAME "aaci-pl041" |
| |
| #define FRAME_PERIOD_US 21 |
| |
| /* |
| * PM support is not complete. Turn it off. |
| */ |
| #undef CONFIG_PM |
| |
| static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97) |
| { |
| u32 v, maincr = aaci->maincr | MAINCR_SCRA(ac97->num); |
| |
| /* |
| * Ensure that the slot 1/2 RX registers are empty. |
| */ |
| v = readl(aaci->base + AACI_SLFR); |
| if (v & SLFR_2RXV) |
| readl(aaci->base + AACI_SL2RX); |
| if (v & SLFR_1RXV) |
| readl(aaci->base + AACI_SL1RX); |
| |
| writel(maincr, aaci->base + AACI_MAINCR); |
| } |
| |
| /* |
| * P29: |
| * The recommended use of programming the external codec through slot 1 |
| * and slot 2 data is to use the channels during setup routines and the |
| * slot register at any other time. The data written into slot 1, slot 2 |
| * and slot 12 registers is transmitted only when their corresponding |
| * SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR |
| * register. |
| */ |
| static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, |
| unsigned short val) |
| { |
| struct aaci *aaci = ac97->private_data; |
| int timeout; |
| u32 v; |
| |
| if (ac97->num >= 4) |
| return; |
| |
| mutex_lock(&aaci->ac97_sem); |
| |
| aaci_ac97_select_codec(aaci, ac97); |
| |
| /* |
| * P54: You must ensure that AACI_SL2TX is always written |
| * to, if required, before data is written to AACI_SL1TX. |
| */ |
| writel(val << 4, aaci->base + AACI_SL2TX); |
| writel(reg << 12, aaci->base + AACI_SL1TX); |
| |
| /* Initially, wait one frame period */ |
| udelay(FRAME_PERIOD_US); |
| |
| /* And then wait an additional eight frame periods for it to be sent */ |
| timeout = FRAME_PERIOD_US * 8; |
| do { |
| udelay(1); |
| v = readl(aaci->base + AACI_SLFR); |
| } while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout); |
| |
| if (v & (SLFR_1TXB|SLFR_2TXB)) |
| dev_err(&aaci->dev->dev, |
| "timeout waiting for write to complete\n"); |
| |
| mutex_unlock(&aaci->ac97_sem); |
| } |
| |
| /* |
| * Read an AC'97 register. |
| */ |
| static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) |
| { |
| struct aaci *aaci = ac97->private_data; |
| int timeout, retries = 10; |
| u32 v; |
| |
| if (ac97->num >= 4) |
| return ~0; |
| |
| mutex_lock(&aaci->ac97_sem); |
| |
| aaci_ac97_select_codec(aaci, ac97); |
| |
| /* |
| * Write the register address to slot 1. |
| */ |
| writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX); |
| |
| /* Initially, wait one frame period */ |
| udelay(FRAME_PERIOD_US); |
| |
| /* And then wait an additional eight frame periods for it to be sent */ |
| timeout = FRAME_PERIOD_US * 8; |
| do { |
| udelay(1); |
| v = readl(aaci->base + AACI_SLFR); |
| } while ((v & SLFR_1TXB) && --timeout); |
| |
| if (v & SLFR_1TXB) { |
| dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n"); |
| v = ~0; |
| goto out; |
| } |
| |
| /* Now wait for the response frame */ |
| udelay(FRAME_PERIOD_US); |
| |
| /* And then wait an additional eight frame periods for data */ |
| timeout = FRAME_PERIOD_US * 8; |
| do { |
| udelay(1); |
| cond_resched(); |
| v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV); |
| } while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout); |
| |
| if (v != (SLFR_1RXV|SLFR_2RXV)) { |
| dev_err(&aaci->dev->dev, "timeout on RX valid\n"); |
| v = ~0; |
| goto out; |
| } |
| |
| do { |
| v = readl(aaci->base + AACI_SL1RX) >> 12; |
| if (v == reg) { |
| v = readl(aaci->base + AACI_SL2RX) >> 4; |
| break; |
| } else if (--retries) { |
| dev_warn(&aaci->dev->dev, |
| "ac97 read back fail. retry\n"); |
| continue; |
| } else { |
| dev_warn(&aaci->dev->dev, |
| "wrong ac97 register read back (%x != %x)\n", |
| v, reg); |
| v = ~0; |
| } |
| } while (retries); |
| out: |
| mutex_unlock(&aaci->ac97_sem); |
| return v; |
| } |
| |
| static inline void |
| aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask) |
| { |
| u32 val; |
| int timeout = 5000; |
| |
| do { |
| udelay(1); |
| val = readl(aacirun->base + AACI_SR); |
| } while (val & mask && timeout--); |
| } |
| |
| |
| |
| /* |
| * Interrupt support. |
| */ |
| static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) |
| { |
| if (mask & ISR_ORINTR) { |
| dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel); |
| writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR); |
| } |
| |
| if (mask & ISR_RXTOINTR) { |
| dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel); |
| writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR); |
| } |
| |
| if (mask & ISR_RXINTR) { |
| struct aaci_runtime *aacirun = &aaci->capture; |
| void *ptr; |
| |
| if (!aacirun->substream || !aacirun->start) { |
| dev_warn(&aaci->dev->dev, "RX interrupt???\n"); |
| writel(0, aacirun->base + AACI_IE); |
| return; |
| } |
| |
| spin_lock(&aacirun->lock); |
| |
| ptr = aacirun->ptr; |
| do { |
| unsigned int len = aacirun->fifosz; |
| u32 val; |
| |
| if (aacirun->bytes <= 0) { |
| aacirun->bytes += aacirun->period; |
| aacirun->ptr = ptr; |
| spin_unlock(&aacirun->lock); |
| snd_pcm_period_elapsed(aacirun->substream); |
| spin_lock(&aacirun->lock); |
| } |
| if (!(aacirun->cr & CR_EN)) |
| break; |
| |
| val = readl(aacirun->base + AACI_SR); |
| if (!(val & SR_RXHF)) |
| break; |
| if (!(val & SR_RXFF)) |
| len >>= 1; |
| |
| aacirun->bytes -= len; |
| |
| /* reading 16 bytes at a time */ |
| for( ; len > 0; len -= 16) { |
| asm( |
| "ldmia %1, {r0, r1, r2, r3}\n\t" |
| "stmia %0!, {r0, r1, r2, r3}" |
| : "+r" (ptr) |
| : "r" (aacirun->fifo) |
| : "r0", "r1", "r2", "r3", "cc"); |
| |
| if (ptr >= aacirun->end) |
| ptr = aacirun->start; |
| } |
| } while(1); |
| |
| aacirun->ptr = ptr; |
| |
| spin_unlock(&aacirun->lock); |
| } |
| |
| if (mask & ISR_URINTR) { |
| dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel); |
| writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR); |
| } |
| |
| if (mask & ISR_TXINTR) { |
| struct aaci_runtime *aacirun = &aaci->playback; |
| void *ptr; |
| |
| if (!aacirun->substream || !aacirun->start) { |
| dev_warn(&aaci->dev->dev, "TX interrupt???\n"); |
| writel(0, aacirun->base + AACI_IE); |
| return; |
| } |
| |
| spin_lock(&aacirun->lock); |
| |
| ptr = aacirun->ptr; |
| do { |
| unsigned int len = aacirun->fifosz; |
| u32 val; |
| |
| if (aacirun->bytes <= 0) { |
| aacirun->bytes += aacirun->period; |
| aacirun->ptr = ptr; |
| spin_unlock(&aacirun->lock); |
| snd_pcm_period_elapsed(aacirun->substream); |
| spin_lock(&aacirun->lock); |
| } |
| if (!(aacirun->cr & CR_EN)) |
| break; |
| |
| val = readl(aacirun->base + AACI_SR); |
| if (!(val & SR_TXHE)) |
| break; |
| if (!(val & SR_TXFE)) |
| len >>= 1; |
| |
| aacirun->bytes -= len; |
| |
| /* writing 16 bytes at a time */ |
| for ( ; len > 0; len -= 16) { |
| asm( |
| "ldmia %0!, {r0, r1, r2, r3}\n\t" |
| "stmia %1, {r0, r1, r2, r3}" |
| : "+r" (ptr) |
| : "r" (aacirun->fifo) |
| : "r0", "r1", "r2", "r3", "cc"); |
| |
| if (ptr >= aacirun->end) |
| ptr = aacirun->start; |
| } |
| } while (1); |
| |
| aacirun->ptr = ptr; |
| |
| spin_unlock(&aacirun->lock); |
| } |
| } |
| |
| static irqreturn_t aaci_irq(int irq, void *devid) |
| { |
| struct aaci *aaci = devid; |
| u32 mask; |
| int i; |
| |
| mask = readl(aaci->base + AACI_ALLINTS); |
| if (mask) { |
| u32 m = mask; |
| for (i = 0; i < 4; i++, m >>= 7) { |
| if (m & 0x7f) { |
| aaci_fifo_irq(aaci, i, m); |
| } |
| } |
| } |
| |
| return mask ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| |
| |
| /* |
| * ALSA support. |
| */ |
| static struct snd_pcm_hardware aaci_hw_info = { |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_RESUME, |
| |
| /* |
| * ALSA doesn't support 18-bit or 20-bit packed into 32-bit |
| * words. It also doesn't support 12-bit at all. |
| */ |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| |
| /* rates are setup from the AC'97 codec */ |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 64 * 1024, |
| .period_bytes_min = 256, |
| .period_bytes_max = PAGE_SIZE, |
| .periods_min = 4, |
| .periods_max = PAGE_SIZE / 16, |
| }; |
| |
| /* |
| * We can support two and four channel audio. Unfortunately |
| * six channel audio requires a non-standard channel ordering: |
| * 2 -> FL(3), FR(4) |
| * 4 -> FL(3), FR(4), SL(7), SR(8) |
| * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required) |
| * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual) |
| * This requires an ALSA configuration file to correct. |
| */ |
| static int aaci_rule_channels(struct snd_pcm_hw_params *p, |
| struct snd_pcm_hw_rule *rule) |
| { |
| static unsigned int channel_list[] = { 2, 4, 6 }; |
| struct aaci *aaci = rule->private; |
| unsigned int mask = 1 << 0, slots; |
| |
| /* pcms[0] is the our 5.1 PCM instance. */ |
| slots = aaci->ac97_bus->pcms[0].r[0].slots; |
| if (slots & (1 << AC97_SLOT_PCM_SLEFT)) { |
| mask |= 1 << 1; |
| if (slots & (1 << AC97_SLOT_LFE)) |
| mask |= 1 << 2; |
| } |
| |
| return snd_interval_list(hw_param_interval(p, rule->var), |
| ARRAY_SIZE(channel_list), channel_list, mask); |
| } |
| |
| static int aaci_pcm_open(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci *aaci = substream->private_data; |
| struct aaci_runtime *aacirun; |
| int ret = 0; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| aacirun = &aaci->playback; |
| } else { |
| aacirun = &aaci->capture; |
| } |
| |
| aacirun->substream = substream; |
| runtime->private_data = aacirun; |
| runtime->hw = aaci_hw_info; |
| runtime->hw.rates = aacirun->pcm->rates; |
| snd_pcm_limit_hw_rates(runtime); |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| runtime->hw.channels_max = 6; |
| |
| /* Add rule describing channel dependency. */ |
| ret = snd_pcm_hw_rule_add(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| aaci_rule_channels, aaci, |
| SNDRV_PCM_HW_PARAM_CHANNELS, -1); |
| if (ret) |
| return ret; |
| |
| if (aacirun->pcm->r[1].slots) |
| snd_ac97_pcm_double_rate_rules(runtime); |
| } |
| |
| /* |
| * FIXME: ALSA specifies fifo_size in bytes. If we're in normal |
| * mode, each 32-bit word contains one sample. If we're in |
| * compact mode, each 32-bit word contains two samples, effectively |
| * halving the FIFO size. However, we don't know for sure which |
| * we'll be using at this point. We set this to the lower limit. |
| */ |
| runtime->hw.fifo_size = aaci->fifosize * 2; |
| |
| mutex_lock(&aaci->irq_lock); |
| if (!aaci->users++) { |
| ret = request_irq(aaci->dev->irq[0], aaci_irq, |
| IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci); |
| if (ret != 0) |
| aaci->users--; |
| } |
| mutex_unlock(&aaci->irq_lock); |
| |
| return ret; |
| } |
| |
| |
| /* |
| * Common ALSA stuff |
| */ |
| static int aaci_pcm_close(struct snd_pcm_substream *substream) |
| { |
| struct aaci *aaci = substream->private_data; |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| |
| WARN_ON(aacirun->cr & CR_EN); |
| |
| aacirun->substream = NULL; |
| |
| mutex_lock(&aaci->irq_lock); |
| if (!--aaci->users) |
| free_irq(aaci->dev->irq[0], aaci); |
| mutex_unlock(&aaci->irq_lock); |
| |
| return 0; |
| } |
| |
| static int aaci_pcm_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| |
| /* |
| * This must not be called with the device enabled. |
| */ |
| WARN_ON(aacirun->cr & CR_EN); |
| |
| if (aacirun->pcm_open) |
| snd_ac97_pcm_close(aacirun->pcm); |
| aacirun->pcm_open = 0; |
| |
| /* |
| * Clear out the DMA and any allocated buffers. |
| */ |
| snd_pcm_lib_free_pages(substream); |
| |
| return 0; |
| } |
| |
| /* Channel to slot mask */ |
| static const u32 channels_to_slotmask[] = { |
| [2] = CR_SL3 | CR_SL4, |
| [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8, |
| [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9, |
| }; |
| |
| static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| unsigned int channels = params_channels(params); |
| unsigned int rate = params_rate(params); |
| int dbl = rate > 48000; |
| int err; |
| |
| aaci_pcm_hw_free(substream); |
| if (aacirun->pcm_open) { |
| snd_ac97_pcm_close(aacirun->pcm); |
| aacirun->pcm_open = 0; |
| } |
| |
| /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */ |
| if (dbl && channels != 2) |
| return -EINVAL; |
| |
| err = snd_pcm_lib_malloc_pages(substream, |
| params_buffer_bytes(params)); |
| if (err >= 0) { |
| struct aaci *aaci = substream->private_data; |
| |
| err = snd_ac97_pcm_open(aacirun->pcm, rate, channels, |
| aacirun->pcm->r[dbl].slots); |
| |
| aacirun->pcm_open = err == 0; |
| aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; |
| aacirun->cr |= channels_to_slotmask[channels + dbl * 2]; |
| aacirun->fifosz = aaci->fifosize * 4; |
| |
| if (aacirun->cr & CR_COMPACT) |
| aacirun->fifosz >>= 1; |
| } |
| |
| return err; |
| } |
| |
| static int aaci_pcm_prepare(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci_runtime *aacirun = runtime->private_data; |
| |
| aacirun->period = snd_pcm_lib_period_bytes(substream); |
| aacirun->start = runtime->dma_area; |
| aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream); |
| aacirun->ptr = aacirun->start; |
| aacirun->bytes = aacirun->period; |
| |
| return 0; |
| } |
| |
| static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci_runtime *aacirun = runtime->private_data; |
| ssize_t bytes = aacirun->ptr - aacirun->start; |
| |
| return bytes_to_frames(runtime, bytes); |
| } |
| |
| |
| /* |
| * Playback specific ALSA stuff |
| */ |
| static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie &= ~(IE_URIE|IE_TXIE); |
| writel(ie, aacirun->base + AACI_IE); |
| aacirun->cr &= ~CR_EN; |
| aaci_chan_wait_ready(aacirun, SR_TXB); |
| writel(aacirun->cr, aacirun->base + AACI_TXCR); |
| } |
| |
| static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| aaci_chan_wait_ready(aacirun, SR_TXB); |
| aacirun->cr |= CR_EN; |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie |= IE_URIE | IE_TXIE; |
| writel(ie, aacirun->base + AACI_IE); |
| writel(aacirun->cr, aacirun->base + AACI_TXCR); |
| } |
| |
| static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&aacirun->lock, flags); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| aaci_pcm_playback_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_RESUME: |
| aaci_pcm_playback_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_STOP: |
| aaci_pcm_playback_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| aaci_pcm_playback_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| |
| spin_unlock_irqrestore(&aacirun->lock, flags); |
| |
| return ret; |
| } |
| |
| static struct snd_pcm_ops aaci_playback_ops = { |
| .open = aaci_pcm_open, |
| .close = aaci_pcm_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = aaci_pcm_hw_params, |
| .hw_free = aaci_pcm_hw_free, |
| .prepare = aaci_pcm_prepare, |
| .trigger = aaci_pcm_playback_trigger, |
| .pointer = aaci_pcm_pointer, |
| }; |
| |
| static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| aaci_chan_wait_ready(aacirun, SR_RXB); |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie &= ~(IE_ORIE | IE_RXIE); |
| writel(ie, aacirun->base+AACI_IE); |
| |
| aacirun->cr &= ~CR_EN; |
| |
| writel(aacirun->cr, aacirun->base + AACI_RXCR); |
| } |
| |
| static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| aaci_chan_wait_ready(aacirun, SR_RXB); |
| |
| #ifdef DEBUG |
| /* RX Timeout value: bits 28:17 in RXCR */ |
| aacirun->cr |= 0xf << 17; |
| #endif |
| |
| aacirun->cr |= CR_EN; |
| writel(aacirun->cr, aacirun->base + AACI_RXCR); |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full |
| writel(ie, aacirun->base + AACI_IE); |
| } |
| |
| static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&aacirun->lock, flags); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| aaci_pcm_capture_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_RESUME: |
| aaci_pcm_capture_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_STOP: |
| aaci_pcm_capture_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| aaci_pcm_capture_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| |
| spin_unlock_irqrestore(&aacirun->lock, flags); |
| |
| return ret; |
| } |
| |
| static int aaci_pcm_capture_prepare(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci *aaci = substream->private_data; |
| |
| aaci_pcm_prepare(substream); |
| |
| /* allow changing of sample rate */ |
| aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */ |
| aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); |
| aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate); |
| |
| /* Record select: Mic: 0, Aux: 3, Line: 4 */ |
| aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404); |
| |
| return 0; |
| } |
| |
| static struct snd_pcm_ops aaci_capture_ops = { |
| .open = aaci_pcm_open, |
| .close = aaci_pcm_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = aaci_pcm_hw_params, |
| .hw_free = aaci_pcm_hw_free, |
| .prepare = aaci_pcm_capture_prepare, |
| .trigger = aaci_pcm_capture_trigger, |
| .pointer = aaci_pcm_pointer, |
| }; |
| |
| /* |
| * Power Management. |
| */ |
| #ifdef CONFIG_PM |
| static int aaci_do_suspend(struct snd_card *card, unsigned int state) |
| { |
| struct aaci *aaci = card->private_data; |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3cold); |
| snd_pcm_suspend_all(aaci->pcm); |
| return 0; |
| } |
| |
| static int aaci_do_resume(struct snd_card *card, unsigned int state) |
| { |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| |
| static int aaci_suspend(struct amba_device *dev, pm_message_t state) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| return card ? aaci_do_suspend(card) : 0; |
| } |
| |
| static int aaci_resume(struct amba_device *dev) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| return card ? aaci_do_resume(card) : 0; |
| } |
| #else |
| #define aaci_do_suspend NULL |
| #define aaci_do_resume NULL |
| #define aaci_suspend NULL |
| #define aaci_resume NULL |
| #endif |
| |
| |
| static struct ac97_pcm ac97_defs[] __devinitdata = { |
| [0] = { /* Front PCM */ |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_PCM_LEFT) | |
| (1 << AC97_SLOT_PCM_RIGHT) | |
| (1 << AC97_SLOT_PCM_CENTER) | |
| (1 << AC97_SLOT_PCM_SLEFT) | |
| (1 << AC97_SLOT_PCM_SRIGHT) | |
| (1 << AC97_SLOT_LFE), |
| }, |
| [1] = { |
| .slots = (1 << AC97_SLOT_PCM_LEFT) | |
| (1 << AC97_SLOT_PCM_RIGHT) | |
| (1 << AC97_SLOT_PCM_LEFT_0) | |
| (1 << AC97_SLOT_PCM_RIGHT_0), |
| }, |
| }, |
| }, |
| [1] = { /* PCM in */ |
| .stream = 1, |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_PCM_LEFT) | |
| (1 << AC97_SLOT_PCM_RIGHT), |
| }, |
| }, |
| }, |
| [2] = { /* Mic in */ |
| .stream = 1, |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_MIC), |
| }, |
| }, |
| } |
| }; |
| |
| static struct snd_ac97_bus_ops aaci_bus_ops = { |
| .write = aaci_ac97_write, |
| .read = aaci_ac97_read, |
| }; |
| |
| static int __devinit aaci_probe_ac97(struct aaci *aaci) |
| { |
| struct snd_ac97_template ac97_template; |
| struct snd_ac97_bus *ac97_bus; |
| struct snd_ac97 *ac97; |
| int ret; |
| |
| /* |
| * Assert AACIRESET for 2us |
| */ |
| writel(0, aaci->base + AACI_RESET); |
| udelay(2); |
| writel(RESET_NRST, aaci->base + AACI_RESET); |
| |
| /* |
| * Give the AC'97 codec more than enough time |
| * to wake up. (42us = ~2 frames at 48kHz.) |
| */ |
| udelay(FRAME_PERIOD_US * 2); |
| |
| ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus); |
| if (ret) |
| goto out; |
| |
| ac97_bus->clock = 48000; |
| aaci->ac97_bus = ac97_bus; |
| |
| memset(&ac97_template, 0, sizeof(struct snd_ac97_template)); |
| ac97_template.private_data = aaci; |
| ac97_template.num = 0; |
| ac97_template.scaps = AC97_SCAP_SKIP_MODEM; |
| |
| ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97); |
| if (ret) |
| goto out; |
| aaci->ac97 = ac97; |
| |
| /* |
| * Disable AC97 PC Beep input on audio codecs. |
| */ |
| if (ac97_is_audio(ac97)) |
| snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x801e); |
| |
| ret = snd_ac97_pcm_assign(ac97_bus, ARRAY_SIZE(ac97_defs), ac97_defs); |
| if (ret) |
| goto out; |
| |
| aaci->playback.pcm = &ac97_bus->pcms[0]; |
| aaci->capture.pcm = &ac97_bus->pcms[1]; |
| |
| out: |
| return ret; |
| } |
| |
| static void aaci_free_card(struct snd_card *card) |
| { |
| struct aaci *aaci = card->private_data; |
| if (aaci->base) |
| iounmap(aaci->base); |
| } |
| |
| static struct aaci * __devinit aaci_init_card(struct amba_device *dev) |
| { |
| struct aaci *aaci; |
| struct snd_card *card; |
| int err; |
| |
| err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, |
| THIS_MODULE, sizeof(struct aaci), &card); |
| if (err < 0) |
| return NULL; |
| |
| card->private_free = aaci_free_card; |
| |
| strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver)); |
| strlcpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname)); |
| snprintf(card->longname, sizeof(card->longname), |
| "%s PL%03x rev%u at 0x%08llx, irq %d", |
| card->shortname, amba_part(dev), amba_rev(dev), |
| (unsigned long long)dev->res.start, dev->irq[0]); |
| |
| aaci = card->private_data; |
| mutex_init(&aaci->ac97_sem); |
| mutex_init(&aaci->irq_lock); |
| aaci->card = card; |
| aaci->dev = dev; |
| |
| /* Set MAINCR to allow slot 1 and 2 data IO */ |
| aaci->maincr = MAINCR_IE | MAINCR_SL1RXEN | MAINCR_SL1TXEN | |
| MAINCR_SL2RXEN | MAINCR_SL2TXEN; |
| |
| return aaci; |
| } |
| |
| static int __devinit aaci_init_pcm(struct aaci *aaci) |
| { |
| struct snd_pcm *pcm; |
| int ret; |
| |
| ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm); |
| if (ret == 0) { |
| aaci->pcm = pcm; |
| pcm->private_data = aaci; |
| pcm->info_flags = 0; |
| |
| strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name)); |
| |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops); |
| snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, |
| NULL, 0, 64 * 1024); |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) |
| { |
| struct aaci_runtime *aacirun = &aaci->playback; |
| int i; |
| |
| writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR); |
| |
| for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++) |
| writel(0, aacirun->fifo); |
| |
| writel(0, aacirun->base + AACI_TXCR); |
| |
| /* |
| * Re-initialise the AACI after the FIFO depth test, to |
| * ensure that the FIFOs are empty. Unfortunately, merely |
| * disabling the channel doesn't clear the FIFO. |
| */ |
| writel(aaci->maincr & ~MAINCR_IE, aaci->base + AACI_MAINCR); |
| writel(aaci->maincr, aaci->base + AACI_MAINCR); |
| |
| /* |
| * If we hit 4096, we failed. Go back to the specified |
| * fifo depth. |
| */ |
| if (i == 4096) |
| i = 8; |
| |
| return i; |
| } |
| |
| static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) |
| { |
| struct aaci *aaci; |
| int ret, i; |
| |
| ret = amba_request_regions(dev, NULL); |
| if (ret) |
| return ret; |
| |
| aaci = aaci_init_card(dev); |
| if (!aaci) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| aaci->base = ioremap(dev->res.start, resource_size(&dev->res)); |
| if (!aaci->base) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Playback uses AACI channel 0 |
| */ |
| spin_lock_init(&aaci->playback.lock); |
| aaci->playback.base = aaci->base + AACI_CSCH1; |
| aaci->playback.fifo = aaci->base + AACI_DR1; |
| |
| /* |
| * Capture uses AACI channel 0 |
| */ |
| spin_lock_init(&aaci->capture.lock); |
| aaci->capture.base = aaci->base + AACI_CSCH1; |
| aaci->capture.fifo = aaci->base + AACI_DR1; |
| |
| for (i = 0; i < 4; i++) { |
| void __iomem *base = aaci->base + i * 0x14; |
| |
| writel(0, base + AACI_IE); |
| writel(0, base + AACI_TXCR); |
| writel(0, base + AACI_RXCR); |
| } |
| |
| writel(0x1fff, aaci->base + AACI_INTCLR); |
| writel(aaci->maincr, aaci->base + AACI_MAINCR); |
| /* |
| * Fix: ac97 read back fail errors by reading |
| * from any arbitrary aaci register. |
| */ |
| readl(aaci->base + AACI_CSCH1); |
| ret = aaci_probe_ac97(aaci); |
| if (ret) |
| goto out; |
| |
| /* |
| * Size the FIFOs (must be multiple of 16). |
| */ |
| aaci->fifosize = aaci_size_fifo(aaci); |
| if (aaci->fifosize & 15) { |
| printk(KERN_WARNING "AACI: fifosize = %d not supported\n", |
| aaci->fifosize); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| ret = aaci_init_pcm(aaci); |
| if (ret) |
| goto out; |
| |
| snd_card_set_dev(aaci->card, &dev->dev); |
| |
| ret = snd_card_register(aaci->card); |
| if (ret == 0) { |
| dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname, |
| aaci->fifosize); |
| amba_set_drvdata(dev, aaci->card); |
| return ret; |
| } |
| |
| out: |
| if (aaci) |
| snd_card_free(aaci->card); |
| amba_release_regions(dev); |
| return ret; |
| } |
| |
| static int __devexit aaci_remove(struct amba_device *dev) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| |
| amba_set_drvdata(dev, NULL); |
| |
| if (card) { |
| struct aaci *aaci = card->private_data; |
| writel(0, aaci->base + AACI_MAINCR); |
| |
| snd_card_free(card); |
| amba_release_regions(dev); |
| } |
| |
| return 0; |
| } |
| |
| static struct amba_id aaci_ids[] = { |
| { |
| .id = 0x00041041, |
| .mask = 0x000fffff, |
| }, |
| { 0, 0 }, |
| }; |
| |
| static struct amba_driver aaci_driver = { |
| .drv = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = aaci_probe, |
| .remove = __devexit_p(aaci_remove), |
| .suspend = aaci_suspend, |
| .resume = aaci_resume, |
| .id_table = aaci_ids, |
| }; |
| |
| static int __init aaci_init(void) |
| { |
| return amba_driver_register(&aaci_driver); |
| } |
| |
| static void __exit aaci_exit(void) |
| { |
| amba_driver_unregister(&aaci_driver); |
| } |
| |
| module_init(aaci_init); |
| module_exit(aaci_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver"); |