| /* |
| * linux/drivers/mmc/mmc.c |
| * |
| * Copyright (C) 2003-2004 Russell King, All Rights Reserved. |
| * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. |
| * SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/completion.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/pagemap.h> |
| #include <linux/err.h> |
| #include <asm/scatterlist.h> |
| #include <linux/scatterlist.h> |
| |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/protocol.h> |
| |
| #include "mmc.h" |
| |
| #define CMD_RETRIES 3 |
| |
| /* |
| * OCR Bit positions to 10s of Vdd mV. |
| */ |
| static const unsigned short mmc_ocr_bit_to_vdd[] = { |
| 150, 155, 160, 165, 170, 180, 190, 200, |
| 210, 220, 230, 240, 250, 260, 270, 280, |
| 290, 300, 310, 320, 330, 340, 350, 360 |
| }; |
| |
| static const unsigned int tran_exp[] = { |
| 10000, 100000, 1000000, 10000000, |
| 0, 0, 0, 0 |
| }; |
| |
| static const unsigned char tran_mant[] = { |
| 0, 10, 12, 13, 15, 20, 25, 30, |
| 35, 40, 45, 50, 55, 60, 70, 80, |
| }; |
| |
| static const unsigned int tacc_exp[] = { |
| 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, |
| }; |
| |
| static const unsigned int tacc_mant[] = { |
| 0, 10, 12, 13, 15, 20, 25, 30, |
| 35, 40, 45, 50, 55, 60, 70, 80, |
| }; |
| |
| |
| /** |
| * mmc_request_done - finish processing an MMC request |
| * @host: MMC host which completed request |
| * @mrq: MMC request which request |
| * |
| * MMC drivers should call this function when they have completed |
| * their processing of a request. |
| */ |
| void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) |
| { |
| struct mmc_command *cmd = mrq->cmd; |
| int err = cmd->error; |
| |
| pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n", |
| mmc_hostname(host), cmd->opcode, err, |
| mrq->data ? mrq->data->error : 0, |
| mrq->stop ? mrq->stop->error : 0, |
| cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); |
| |
| if (err && cmd->retries) { |
| cmd->retries--; |
| cmd->error = 0; |
| host->ops->request(host, mrq); |
| } else if (mrq->done) { |
| mrq->done(mrq); |
| } |
| } |
| |
| EXPORT_SYMBOL(mmc_request_done); |
| |
| /** |
| * mmc_start_request - start a command on a host |
| * @host: MMC host to start command on |
| * @mrq: MMC request to start |
| * |
| * Queue a command on the specified host. We expect the |
| * caller to be holding the host lock with interrupts disabled. |
| */ |
| void |
| mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) |
| { |
| pr_debug("%s: starting CMD%u arg %08x flags %08x\n", |
| mmc_hostname(host), mrq->cmd->opcode, |
| mrq->cmd->arg, mrq->cmd->flags); |
| |
| WARN_ON(host->card_busy == NULL); |
| |
| mrq->cmd->error = 0; |
| mrq->cmd->mrq = mrq; |
| if (mrq->data) { |
| mrq->cmd->data = mrq->data; |
| mrq->data->error = 0; |
| mrq->data->mrq = mrq; |
| if (mrq->stop) { |
| mrq->data->stop = mrq->stop; |
| mrq->stop->error = 0; |
| mrq->stop->mrq = mrq; |
| } |
| } |
| host->ops->request(host, mrq); |
| } |
| |
| EXPORT_SYMBOL(mmc_start_request); |
| |
| static void mmc_wait_done(struct mmc_request *mrq) |
| { |
| complete(mrq->done_data); |
| } |
| |
| int mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) |
| { |
| DECLARE_COMPLETION_ONSTACK(complete); |
| |
| mrq->done_data = &complete; |
| mrq->done = mmc_wait_done; |
| |
| mmc_start_request(host, mrq); |
| |
| wait_for_completion(&complete); |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(mmc_wait_for_req); |
| |
| /** |
| * mmc_wait_for_cmd - start a command and wait for completion |
| * @host: MMC host to start command |
| * @cmd: MMC command to start |
| * @retries: maximum number of retries |
| * |
| * Start a new MMC command for a host, and wait for the command |
| * to complete. Return any error that occurred while the command |
| * was executing. Do not attempt to parse the response. |
| */ |
| int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) |
| { |
| struct mmc_request mrq; |
| |
| BUG_ON(host->card_busy == NULL); |
| |
| memset(&mrq, 0, sizeof(struct mmc_request)); |
| |
| memset(cmd->resp, 0, sizeof(cmd->resp)); |
| cmd->retries = retries; |
| |
| mrq.cmd = cmd; |
| cmd->data = NULL; |
| |
| mmc_wait_for_req(host, &mrq); |
| |
| return cmd->error; |
| } |
| |
| EXPORT_SYMBOL(mmc_wait_for_cmd); |
| |
| /** |
| * mmc_wait_for_app_cmd - start an application command and wait for |
| completion |
| * @host: MMC host to start command |
| * @rca: RCA to send MMC_APP_CMD to |
| * @cmd: MMC command to start |
| * @retries: maximum number of retries |
| * |
| * Sends a MMC_APP_CMD, checks the card response, sends the command |
| * in the parameter and waits for it to complete. Return any error |
| * that occurred while the command was executing. Do not attempt to |
| * parse the response. |
| */ |
| int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca, |
| struct mmc_command *cmd, int retries) |
| { |
| struct mmc_request mrq; |
| struct mmc_command appcmd; |
| |
| int i, err; |
| |
| BUG_ON(host->card_busy == NULL); |
| BUG_ON(retries < 0); |
| |
| err = MMC_ERR_INVALID; |
| |
| /* |
| * We have to resend MMC_APP_CMD for each attempt so |
| * we cannot use the retries field in mmc_command. |
| */ |
| for (i = 0;i <= retries;i++) { |
| memset(&mrq, 0, sizeof(struct mmc_request)); |
| |
| appcmd.opcode = MMC_APP_CMD; |
| appcmd.arg = rca << 16; |
| appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| appcmd.retries = 0; |
| memset(appcmd.resp, 0, sizeof(appcmd.resp)); |
| appcmd.data = NULL; |
| |
| mrq.cmd = &appcmd; |
| appcmd.data = NULL; |
| |
| mmc_wait_for_req(host, &mrq); |
| |
| if (appcmd.error) { |
| err = appcmd.error; |
| continue; |
| } |
| |
| /* Check that card supported application commands */ |
| if (!(appcmd.resp[0] & R1_APP_CMD)) |
| return MMC_ERR_FAILED; |
| |
| memset(&mrq, 0, sizeof(struct mmc_request)); |
| |
| memset(cmd->resp, 0, sizeof(cmd->resp)); |
| cmd->retries = 0; |
| |
| mrq.cmd = cmd; |
| cmd->data = NULL; |
| |
| mmc_wait_for_req(host, &mrq); |
| |
| err = cmd->error; |
| if (cmd->error == MMC_ERR_NONE) |
| break; |
| } |
| |
| return err; |
| } |
| |
| EXPORT_SYMBOL(mmc_wait_for_app_cmd); |
| |
| /** |
| * mmc_set_data_timeout - set the timeout for a data command |
| * @data: data phase for command |
| * @card: the MMC card associated with the data transfer |
| * @write: flag to differentiate reads from writes |
| */ |
| void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card, |
| int write) |
| { |
| unsigned int mult; |
| |
| /* |
| * SD cards use a 100 multiplier rather than 10 |
| */ |
| mult = mmc_card_sd(card) ? 100 : 10; |
| |
| /* |
| * Scale up the multiplier (and therefore the timeout) by |
| * the r2w factor for writes. |
| */ |
| if (write) |
| mult <<= card->csd.r2w_factor; |
| |
| data->timeout_ns = card->csd.tacc_ns * mult; |
| data->timeout_clks = card->csd.tacc_clks * mult; |
| |
| /* |
| * SD cards also have an upper limit on the timeout. |
| */ |
| if (mmc_card_sd(card)) { |
| unsigned int timeout_us, limit_us; |
| |
| timeout_us = data->timeout_ns / 1000; |
| timeout_us += data->timeout_clks * 1000 / |
| (card->host->ios.clock / 1000); |
| |
| if (write) |
| limit_us = 250000; |
| else |
| limit_us = 100000; |
| |
| if (timeout_us > limit_us) { |
| data->timeout_ns = limit_us * 1000; |
| data->timeout_clks = 0; |
| } |
| } |
| } |
| EXPORT_SYMBOL(mmc_set_data_timeout); |
| |
| static int mmc_select_card(struct mmc_host *host, struct mmc_card *card); |
| |
| /** |
| * __mmc_claim_host - exclusively claim a host |
| * @host: mmc host to claim |
| * @card: mmc card to claim host for |
| * |
| * Claim a host for a set of operations. If a valid card |
| * is passed and this wasn't the last card selected, select |
| * the card before returning. |
| * |
| * Note: you should use mmc_card_claim_host or mmc_claim_host. |
| */ |
| int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long flags; |
| int err = 0; |
| |
| add_wait_queue(&host->wq, &wait); |
| spin_lock_irqsave(&host->lock, flags); |
| while (1) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| if (host->card_busy == NULL) |
| break; |
| spin_unlock_irqrestore(&host->lock, flags); |
| schedule(); |
| spin_lock_irqsave(&host->lock, flags); |
| } |
| set_current_state(TASK_RUNNING); |
| host->card_busy = card; |
| spin_unlock_irqrestore(&host->lock, flags); |
| remove_wait_queue(&host->wq, &wait); |
| |
| if (card != (void *)-1) { |
| err = mmc_select_card(host, card); |
| if (err != MMC_ERR_NONE) |
| return err; |
| } |
| |
| return err; |
| } |
| |
| EXPORT_SYMBOL(__mmc_claim_host); |
| |
| /** |
| * mmc_release_host - release a host |
| * @host: mmc host to release |
| * |
| * Release a MMC host, allowing others to claim the host |
| * for their operations. |
| */ |
| void mmc_release_host(struct mmc_host *host) |
| { |
| unsigned long flags; |
| |
| BUG_ON(host->card_busy == NULL); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| host->card_busy = NULL; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| wake_up(&host->wq); |
| } |
| |
| EXPORT_SYMBOL(mmc_release_host); |
| |
| static inline void mmc_set_ios(struct mmc_host *host) |
| { |
| struct mmc_ios *ios = &host->ios; |
| |
| pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n", |
| mmc_hostname(host), ios->clock, ios->bus_mode, |
| ios->power_mode, ios->chip_select, ios->vdd, |
| ios->bus_width); |
| |
| host->ops->set_ios(host, ios); |
| } |
| |
| static int mmc_select_card(struct mmc_host *host, struct mmc_card *card) |
| { |
| int err; |
| struct mmc_command cmd; |
| |
| BUG_ON(host->card_busy == NULL); |
| |
| if (host->card_selected == card) |
| return MMC_ERR_NONE; |
| |
| host->card_selected = card; |
| |
| cmd.opcode = MMC_SELECT_CARD; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err != MMC_ERR_NONE) |
| return err; |
| |
| /* |
| * Default bus width is 1 bit. |
| */ |
| host->ios.bus_width = MMC_BUS_WIDTH_1; |
| |
| /* |
| * We can only change the bus width of the selected |
| * card so therefore we have to put the handling |
| * here. |
| */ |
| if (host->caps & MMC_CAP_4_BIT_DATA) { |
| /* |
| * The card is in 1 bit mode by default so |
| * we only need to change if it supports the |
| * wider version. |
| */ |
| if (mmc_card_sd(card) && |
| (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { |
| struct mmc_command cmd; |
| cmd.opcode = SD_APP_SET_BUS_WIDTH; |
| cmd.arg = SD_BUS_WIDTH_4; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_app_cmd(host, card->rca, &cmd, |
| CMD_RETRIES); |
| if (err != MMC_ERR_NONE) |
| return err; |
| |
| host->ios.bus_width = MMC_BUS_WIDTH_4; |
| } |
| } |
| |
| mmc_set_ios(host); |
| |
| return MMC_ERR_NONE; |
| } |
| |
| /* |
| * Ensure that no card is selected. |
| */ |
| static void mmc_deselect_cards(struct mmc_host *host) |
| { |
| struct mmc_command cmd; |
| |
| if (host->card_selected) { |
| host->card_selected = NULL; |
| |
| cmd.opcode = MMC_SELECT_CARD; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_NONE | MMC_CMD_AC; |
| |
| mmc_wait_for_cmd(host, &cmd, 0); |
| } |
| } |
| |
| |
| static inline void mmc_delay(unsigned int ms) |
| { |
| if (ms < HZ / 1000) { |
| yield(); |
| mdelay(ms); |
| } else { |
| msleep_interruptible (ms); |
| } |
| } |
| |
| /* |
| * Mask off any voltages we don't support and select |
| * the lowest voltage |
| */ |
| static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) |
| { |
| int bit; |
| |
| ocr &= host->ocr_avail; |
| |
| bit = ffs(ocr); |
| if (bit) { |
| bit -= 1; |
| |
| ocr &= 3 << bit; |
| |
| host->ios.vdd = bit; |
| mmc_set_ios(host); |
| } else { |
| ocr = 0; |
| } |
| |
| return ocr; |
| } |
| |
| #define UNSTUFF_BITS(resp,start,size) \ |
| ({ \ |
| const int __size = size; \ |
| const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ |
| const int __off = 3 - ((start) / 32); \ |
| const int __shft = (start) & 31; \ |
| u32 __res; \ |
| \ |
| __res = resp[__off] >> __shft; \ |
| if (__size + __shft > 32) \ |
| __res |= resp[__off-1] << ((32 - __shft) % 32); \ |
| __res & __mask; \ |
| }) |
| |
| /* |
| * Given the decoded CSD structure, decode the raw CID to our CID structure. |
| */ |
| static void mmc_decode_cid(struct mmc_card *card) |
| { |
| u32 *resp = card->raw_cid; |
| |
| memset(&card->cid, 0, sizeof(struct mmc_cid)); |
| |
| if (mmc_card_sd(card)) { |
| /* |
| * SD doesn't currently have a version field so we will |
| * have to assume we can parse this. |
| */ |
| card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); |
| card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); |
| card->cid.hwrev = UNSTUFF_BITS(resp, 60, 4); |
| card->cid.fwrev = UNSTUFF_BITS(resp, 56, 4); |
| card->cid.serial = UNSTUFF_BITS(resp, 24, 32); |
| card->cid.year = UNSTUFF_BITS(resp, 12, 8); |
| card->cid.month = UNSTUFF_BITS(resp, 8, 4); |
| |
| card->cid.year += 2000; /* SD cards year offset */ |
| } else { |
| /* |
| * The selection of the format here is based upon published |
| * specs from sandisk and from what people have reported. |
| */ |
| switch (card->csd.mmca_vsn) { |
| case 0: /* MMC v1.0 - v1.2 */ |
| case 1: /* MMC v1.4 */ |
| card->cid.manfid = UNSTUFF_BITS(resp, 104, 24); |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); |
| card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8); |
| card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4); |
| card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4); |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 24); |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; |
| break; |
| |
| case 2: /* MMC v2.0 - v2.2 */ |
| case 3: /* MMC v3.1 - v3.3 */ |
| case 4: /* MMC v4 */ |
| card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); |
| card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 32); |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; |
| break; |
| |
| default: |
| printk("%s: card has unknown MMCA version %d\n", |
| mmc_hostname(card->host), card->csd.mmca_vsn); |
| mmc_card_set_bad(card); |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Given a 128-bit response, decode to our card CSD structure. |
| */ |
| static void mmc_decode_csd(struct mmc_card *card) |
| { |
| struct mmc_csd *csd = &card->csd; |
| unsigned int e, m, csd_struct; |
| u32 *resp = card->raw_csd; |
| |
| if (mmc_card_sd(card)) { |
| csd_struct = UNSTUFF_BITS(resp, 126, 2); |
| if (csd_struct != 0) { |
| printk("%s: unrecognised CSD structure version %d\n", |
| mmc_hostname(card->host), csd_struct); |
| mmc_card_set_bad(card); |
| return; |
| } |
| |
| m = UNSTUFF_BITS(resp, 115, 4); |
| e = UNSTUFF_BITS(resp, 112, 3); |
| csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; |
| csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; |
| |
| m = UNSTUFF_BITS(resp, 99, 4); |
| e = UNSTUFF_BITS(resp, 96, 3); |
| csd->max_dtr = tran_exp[e] * tran_mant[m]; |
| csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); |
| |
| e = UNSTUFF_BITS(resp, 47, 3); |
| m = UNSTUFF_BITS(resp, 62, 12); |
| csd->capacity = (1 + m) << (e + 2); |
| |
| csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); |
| csd->read_partial = UNSTUFF_BITS(resp, 79, 1); |
| csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); |
| csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); |
| csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); |
| csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); |
| csd->write_partial = UNSTUFF_BITS(resp, 21, 1); |
| } else { |
| /* |
| * We only understand CSD structure v1.1 and v1.2. |
| * v1.2 has extra information in bits 15, 11 and 10. |
| */ |
| csd_struct = UNSTUFF_BITS(resp, 126, 2); |
| if (csd_struct != 1 && csd_struct != 2) { |
| printk("%s: unrecognised CSD structure version %d\n", |
| mmc_hostname(card->host), csd_struct); |
| mmc_card_set_bad(card); |
| return; |
| } |
| |
| csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); |
| m = UNSTUFF_BITS(resp, 115, 4); |
| e = UNSTUFF_BITS(resp, 112, 3); |
| csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; |
| csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; |
| |
| m = UNSTUFF_BITS(resp, 99, 4); |
| e = UNSTUFF_BITS(resp, 96, 3); |
| csd->max_dtr = tran_exp[e] * tran_mant[m]; |
| csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); |
| |
| e = UNSTUFF_BITS(resp, 47, 3); |
| m = UNSTUFF_BITS(resp, 62, 12); |
| csd->capacity = (1 + m) << (e + 2); |
| |
| csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); |
| csd->read_partial = UNSTUFF_BITS(resp, 79, 1); |
| csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); |
| csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); |
| csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); |
| csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); |
| csd->write_partial = UNSTUFF_BITS(resp, 21, 1); |
| } |
| } |
| |
| /* |
| * Given a 64-bit response, decode to our card SCR structure. |
| */ |
| static void mmc_decode_scr(struct mmc_card *card) |
| { |
| struct sd_scr *scr = &card->scr; |
| unsigned int scr_struct; |
| u32 resp[4]; |
| |
| BUG_ON(!mmc_card_sd(card)); |
| |
| resp[3] = card->raw_scr[1]; |
| resp[2] = card->raw_scr[0]; |
| |
| scr_struct = UNSTUFF_BITS(resp, 60, 4); |
| if (scr_struct != 0) { |
| printk("%s: unrecognised SCR structure version %d\n", |
| mmc_hostname(card->host), scr_struct); |
| mmc_card_set_bad(card); |
| return; |
| } |
| |
| scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); |
| scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); |
| } |
| |
| /* |
| * Locate a MMC card on this MMC host given a raw CID. |
| */ |
| static struct mmc_card *mmc_find_card(struct mmc_host *host, u32 *raw_cid) |
| { |
| struct mmc_card *card; |
| |
| list_for_each_entry(card, &host->cards, node) { |
| if (memcmp(card->raw_cid, raw_cid, sizeof(card->raw_cid)) == 0) |
| return card; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Allocate a new MMC card, and assign a unique RCA. |
| */ |
| static struct mmc_card * |
| mmc_alloc_card(struct mmc_host *host, u32 *raw_cid, unsigned int *frca) |
| { |
| struct mmc_card *card, *c; |
| unsigned int rca = *frca; |
| |
| card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL); |
| if (!card) |
| return ERR_PTR(-ENOMEM); |
| |
| mmc_init_card(card, host); |
| memcpy(card->raw_cid, raw_cid, sizeof(card->raw_cid)); |
| |
| again: |
| list_for_each_entry(c, &host->cards, node) |
| if (c->rca == rca) { |
| rca++; |
| goto again; |
| } |
| |
| card->rca = rca; |
| |
| *frca = rca; |
| |
| return card; |
| } |
| |
| /* |
| * Tell attached cards to go to IDLE state |
| */ |
| static void mmc_idle_cards(struct mmc_host *host) |
| { |
| struct mmc_command cmd; |
| |
| host->ios.chip_select = MMC_CS_HIGH; |
| mmc_set_ios(host); |
| |
| mmc_delay(1); |
| |
| cmd.opcode = MMC_GO_IDLE_STATE; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; |
| |
| mmc_wait_for_cmd(host, &cmd, 0); |
| |
| mmc_delay(1); |
| |
| host->ios.chip_select = MMC_CS_DONTCARE; |
| mmc_set_ios(host); |
| |
| mmc_delay(1); |
| } |
| |
| /* |
| * Apply power to the MMC stack. This is a two-stage process. |
| * First, we enable power to the card without the clock running. |
| * We then wait a bit for the power to stabilise. Finally, |
| * enable the bus drivers and clock to the card. |
| * |
| * We must _NOT_ enable the clock prior to power stablising. |
| * |
| * If a host does all the power sequencing itself, ignore the |
| * initial MMC_POWER_UP stage. |
| */ |
| static void mmc_power_up(struct mmc_host *host) |
| { |
| int bit = fls(host->ocr_avail) - 1; |
| |
| host->ios.vdd = bit; |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; |
| host->ios.chip_select = MMC_CS_DONTCARE; |
| host->ios.power_mode = MMC_POWER_UP; |
| host->ios.bus_width = MMC_BUS_WIDTH_1; |
| mmc_set_ios(host); |
| |
| mmc_delay(1); |
| |
| host->ios.clock = host->f_min; |
| host->ios.power_mode = MMC_POWER_ON; |
| mmc_set_ios(host); |
| |
| mmc_delay(2); |
| } |
| |
| static void mmc_power_off(struct mmc_host *host) |
| { |
| host->ios.clock = 0; |
| host->ios.vdd = 0; |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; |
| host->ios.chip_select = MMC_CS_DONTCARE; |
| host->ios.power_mode = MMC_POWER_OFF; |
| host->ios.bus_width = MMC_BUS_WIDTH_1; |
| mmc_set_ios(host); |
| } |
| |
| static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) |
| { |
| struct mmc_command cmd; |
| int i, err = 0; |
| |
| cmd.opcode = MMC_SEND_OP_COND; |
| cmd.arg = ocr; |
| cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; |
| |
| for (i = 100; i; i--) { |
| err = mmc_wait_for_cmd(host, &cmd, 0); |
| if (err != MMC_ERR_NONE) |
| break; |
| |
| if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) |
| break; |
| |
| err = MMC_ERR_TIMEOUT; |
| |
| mmc_delay(10); |
| } |
| |
| if (rocr) |
| *rocr = cmd.resp[0]; |
| |
| return err; |
| } |
| |
| static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) |
| { |
| struct mmc_command cmd; |
| int i, err = 0; |
| |
| cmd.opcode = SD_APP_OP_COND; |
| cmd.arg = ocr; |
| cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; |
| |
| for (i = 100; i; i--) { |
| err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES); |
| if (err != MMC_ERR_NONE) |
| break; |
| |
| if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) |
| break; |
| |
| err = MMC_ERR_TIMEOUT; |
| |
| mmc_delay(10); |
| } |
| |
| if (rocr) |
| *rocr = cmd.resp[0]; |
| |
| return err; |
| } |
| |
| /* |
| * Discover cards by requesting their CID. If this command |
| * times out, it is not an error; there are no further cards |
| * to be discovered. Add new cards to the list. |
| * |
| * Create a mmc_card entry for each discovered card, assigning |
| * it an RCA, and save the raw CID for decoding later. |
| */ |
| static void mmc_discover_cards(struct mmc_host *host) |
| { |
| struct mmc_card *card; |
| unsigned int first_rca = 1, err; |
| |
| while (1) { |
| struct mmc_command cmd; |
| |
| cmd.opcode = MMC_ALL_SEND_CID; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err == MMC_ERR_TIMEOUT) { |
| err = MMC_ERR_NONE; |
| break; |
| } |
| if (err != MMC_ERR_NONE) { |
| printk(KERN_ERR "%s: error requesting CID: %d\n", |
| mmc_hostname(host), err); |
| break; |
| } |
| |
| card = mmc_find_card(host, cmd.resp); |
| if (!card) { |
| card = mmc_alloc_card(host, cmd.resp, &first_rca); |
| if (IS_ERR(card)) { |
| err = PTR_ERR(card); |
| break; |
| } |
| list_add(&card->node, &host->cards); |
| } |
| |
| card->state &= ~MMC_STATE_DEAD; |
| |
| if (host->mode == MMC_MODE_SD) { |
| mmc_card_set_sd(card); |
| |
| cmd.opcode = SD_SEND_RELATIVE_ADDR; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err != MMC_ERR_NONE) |
| mmc_card_set_dead(card); |
| else { |
| card->rca = cmd.resp[0] >> 16; |
| |
| if (!host->ops->get_ro) { |
| printk(KERN_WARNING "%s: host does not " |
| "support reading read-only " |
| "switch. assuming write-enable.\n", |
| mmc_hostname(host)); |
| } else { |
| if (host->ops->get_ro(host)) |
| mmc_card_set_readonly(card); |
| } |
| } |
| } else { |
| cmd.opcode = MMC_SET_RELATIVE_ADDR; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err != MMC_ERR_NONE) |
| mmc_card_set_dead(card); |
| } |
| } |
| } |
| |
| static void mmc_read_csds(struct mmc_host *host) |
| { |
| struct mmc_card *card; |
| |
| list_for_each_entry(card, &host->cards, node) { |
| struct mmc_command cmd; |
| int err; |
| |
| if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) |
| continue; |
| |
| cmd.opcode = MMC_SEND_CSD; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R2 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err != MMC_ERR_NONE) { |
| mmc_card_set_dead(card); |
| continue; |
| } |
| |
| memcpy(card->raw_csd, cmd.resp, sizeof(card->raw_csd)); |
| |
| mmc_decode_csd(card); |
| mmc_decode_cid(card); |
| } |
| } |
| |
| static void mmc_read_scrs(struct mmc_host *host) |
| { |
| int err; |
| struct mmc_card *card; |
| struct mmc_request mrq; |
| struct mmc_command cmd; |
| struct mmc_data data; |
| struct scatterlist sg; |
| |
| list_for_each_entry(card, &host->cards, node) { |
| if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) |
| continue; |
| if (!mmc_card_sd(card)) |
| continue; |
| |
| err = mmc_select_card(host, card); |
| if (err != MMC_ERR_NONE) { |
| mmc_card_set_dead(card); |
| continue; |
| } |
| |
| memset(&cmd, 0, sizeof(struct mmc_command)); |
| |
| cmd.opcode = MMC_APP_CMD; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(host, &cmd, 0); |
| if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) { |
| mmc_card_set_dead(card); |
| continue; |
| } |
| |
| memset(&cmd, 0, sizeof(struct mmc_command)); |
| |
| cmd.opcode = SD_APP_SEND_SCR; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; |
| |
| memset(&data, 0, sizeof(struct mmc_data)); |
| |
| mmc_set_data_timeout(&data, card, 0); |
| |
| data.blksz = 1 << 3; |
| data.blocks = 1; |
| data.flags = MMC_DATA_READ; |
| data.sg = &sg; |
| data.sg_len = 1; |
| |
| memset(&mrq, 0, sizeof(struct mmc_request)); |
| |
| mrq.cmd = &cmd; |
| mrq.data = &data; |
| |
| sg_init_one(&sg, (u8*)card->raw_scr, 8); |
| |
| mmc_wait_for_req(host, &mrq); |
| |
| if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { |
| mmc_card_set_dead(card); |
| continue; |
| } |
| |
| card->raw_scr[0] = ntohl(card->raw_scr[0]); |
| card->raw_scr[1] = ntohl(card->raw_scr[1]); |
| |
| mmc_decode_scr(card); |
| } |
| |
| mmc_deselect_cards(host); |
| } |
| |
| static unsigned int mmc_calculate_clock(struct mmc_host *host) |
| { |
| struct mmc_card *card; |
| unsigned int max_dtr = host->f_max; |
| |
| list_for_each_entry(card, &host->cards, node) |
| if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr) |
| max_dtr = card->csd.max_dtr; |
| |
| pr_debug("%s: selected %d.%03dMHz transfer rate\n", |
| mmc_hostname(host), |
| max_dtr / 1000000, (max_dtr / 1000) % 1000); |
| |
| return max_dtr; |
| } |
| |
| /* |
| * Check whether cards we already know about are still present. |
| * We do this by requesting status, and checking whether a card |
| * responds. |
| * |
| * A request for status does not cause a state change in data |
| * transfer mode. |
| */ |
| static void mmc_check_cards(struct mmc_host *host) |
| { |
| struct list_head *l, *n; |
| |
| mmc_deselect_cards(host); |
| |
| list_for_each_safe(l, n, &host->cards) { |
| struct mmc_card *card = mmc_list_to_card(l); |
| struct mmc_command cmd; |
| int err; |
| |
| cmd.opcode = MMC_SEND_STATUS; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); |
| if (err == MMC_ERR_NONE) |
| continue; |
| |
| mmc_card_set_dead(card); |
| } |
| } |
| |
| static void mmc_setup(struct mmc_host *host) |
| { |
| if (host->ios.power_mode != MMC_POWER_ON) { |
| int err; |
| u32 ocr; |
| |
| host->mode = MMC_MODE_SD; |
| |
| mmc_power_up(host); |
| mmc_idle_cards(host); |
| |
| err = mmc_send_app_op_cond(host, 0, &ocr); |
| |
| /* |
| * If we fail to detect any SD cards then try |
| * searching for MMC cards. |
| */ |
| if (err != MMC_ERR_NONE) { |
| host->mode = MMC_MODE_MMC; |
| |
| err = mmc_send_op_cond(host, 0, &ocr); |
| if (err != MMC_ERR_NONE) |
| return; |
| } |
| |
| host->ocr = mmc_select_voltage(host, ocr); |
| |
| /* |
| * Since we're changing the OCR value, we seem to |
| * need to tell some cards to go back to the idle |
| * state. We wait 1ms to give cards time to |
| * respond. |
| */ |
| if (host->ocr) |
| mmc_idle_cards(host); |
| } else { |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; |
| host->ios.clock = host->f_min; |
| mmc_set_ios(host); |
| |
| /* |
| * We should remember the OCR mask from the existing |
| * cards, and detect the new cards OCR mask, combine |
| * the two and re-select the VDD. However, if we do |
| * change VDD, we should do an idle, and then do a |
| * full re-initialisation. We would need to notify |
| * drivers so that they can re-setup the cards as |
| * well, while keeping their queues at bay. |
| * |
| * For the moment, we take the easy way out - if the |
| * new cards don't like our currently selected VDD, |
| * they drop off the bus. |
| */ |
| } |
| |
| if (host->ocr == 0) |
| return; |
| |
| /* |
| * Send the selected OCR multiple times... until the cards |
| * all get the idea that they should be ready for CMD2. |
| * (My SanDisk card seems to need this.) |
| */ |
| if (host->mode == MMC_MODE_SD) |
| mmc_send_app_op_cond(host, host->ocr, NULL); |
| else |
| mmc_send_op_cond(host, host->ocr, NULL); |
| |
| mmc_discover_cards(host); |
| |
| /* |
| * Ok, now switch to push-pull mode. |
| */ |
| host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; |
| mmc_set_ios(host); |
| |
| mmc_read_csds(host); |
| |
| if (host->mode == MMC_MODE_SD) |
| mmc_read_scrs(host); |
| } |
| |
| |
| /** |
| * mmc_detect_change - process change of state on a MMC socket |
| * @host: host which changed state. |
| * @delay: optional delay to wait before detection (jiffies) |
| * |
| * All we know is that card(s) have been inserted or removed |
| * from the socket(s). We don't know which socket or cards. |
| */ |
| void mmc_detect_change(struct mmc_host *host, unsigned long delay) |
| { |
| mmc_schedule_delayed_work(&host->detect, delay); |
| } |
| |
| EXPORT_SYMBOL(mmc_detect_change); |
| |
| |
| static void mmc_rescan(struct work_struct *work) |
| { |
| struct mmc_host *host = |
| container_of(work, struct mmc_host, detect.work); |
| struct list_head *l, *n; |
| unsigned char power_mode; |
| |
| mmc_claim_host(host); |
| |
| /* |
| * Check for removed cards and newly inserted ones. We check for |
| * removed cards first so we can intelligently re-select the VDD. |
| */ |
| power_mode = host->ios.power_mode; |
| if (power_mode == MMC_POWER_ON) |
| mmc_check_cards(host); |
| |
| mmc_setup(host); |
| |
| /* |
| * Some broken cards process CMD1 even in stand-by state. There is |
| * no reply, but an ILLEGAL_COMMAND error is cached and returned |
| * after next command. We poll for card status here to clear any |
| * possibly pending error. |
| */ |
| if (power_mode == MMC_POWER_ON) |
| mmc_check_cards(host); |
| |
| if (!list_empty(&host->cards)) { |
| /* |
| * (Re-)calculate the fastest clock rate which the |
| * attached cards and the host support. |
| */ |
| host->ios.clock = mmc_calculate_clock(host); |
| mmc_set_ios(host); |
| } |
| |
| mmc_release_host(host); |
| |
| list_for_each_safe(l, n, &host->cards) { |
| struct mmc_card *card = mmc_list_to_card(l); |
| |
| /* |
| * If this is a new and good card, register it. |
| */ |
| if (!mmc_card_present(card) && !mmc_card_dead(card)) { |
| if (mmc_register_card(card)) |
| mmc_card_set_dead(card); |
| else |
| mmc_card_set_present(card); |
| } |
| |
| /* |
| * If this card is dead, destroy it. |
| */ |
| if (mmc_card_dead(card)) { |
| list_del(&card->node); |
| mmc_remove_card(card); |
| } |
| } |
| |
| /* |
| * If we discover that there are no cards on the |
| * bus, turn off the clock and power down. |
| */ |
| if (list_empty(&host->cards)) |
| mmc_power_off(host); |
| } |
| |
| |
| /** |
| * mmc_alloc_host - initialise the per-host structure. |
| * @extra: sizeof private data structure |
| * @dev: pointer to host device model structure |
| * |
| * Initialise the per-host structure. |
| */ |
| struct mmc_host *mmc_alloc_host(int extra, struct device *dev) |
| { |
| struct mmc_host *host; |
| |
| host = mmc_alloc_host_sysfs(extra, dev); |
| if (host) { |
| spin_lock_init(&host->lock); |
| init_waitqueue_head(&host->wq); |
| INIT_LIST_HEAD(&host->cards); |
| INIT_DELAYED_WORK(&host->detect, mmc_rescan); |
| |
| /* |
| * By default, hosts do not support SGIO or large requests. |
| * They have to set these according to their abilities. |
| */ |
| host->max_hw_segs = 1; |
| host->max_phys_segs = 1; |
| host->max_sectors = 1 << (PAGE_CACHE_SHIFT - 9); |
| host->max_seg_size = PAGE_CACHE_SIZE; |
| } |
| |
| return host; |
| } |
| |
| EXPORT_SYMBOL(mmc_alloc_host); |
| |
| /** |
| * mmc_add_host - initialise host hardware |
| * @host: mmc host |
| */ |
| int mmc_add_host(struct mmc_host *host) |
| { |
| int ret; |
| |
| ret = mmc_add_host_sysfs(host); |
| if (ret == 0) { |
| mmc_power_off(host); |
| mmc_detect_change(host, 0); |
| } |
| |
| return ret; |
| } |
| |
| EXPORT_SYMBOL(mmc_add_host); |
| |
| /** |
| * mmc_remove_host - remove host hardware |
| * @host: mmc host |
| * |
| * Unregister and remove all cards associated with this host, |
| * and power down the MMC bus. |
| */ |
| void mmc_remove_host(struct mmc_host *host) |
| { |
| struct list_head *l, *n; |
| |
| list_for_each_safe(l, n, &host->cards) { |
| struct mmc_card *card = mmc_list_to_card(l); |
| |
| mmc_remove_card(card); |
| } |
| |
| mmc_power_off(host); |
| mmc_remove_host_sysfs(host); |
| } |
| |
| EXPORT_SYMBOL(mmc_remove_host); |
| |
| /** |
| * mmc_free_host - free the host structure |
| * @host: mmc host |
| * |
| * Free the host once all references to it have been dropped. |
| */ |
| void mmc_free_host(struct mmc_host *host) |
| { |
| mmc_flush_scheduled_work(); |
| mmc_free_host_sysfs(host); |
| } |
| |
| EXPORT_SYMBOL(mmc_free_host); |
| |
| #ifdef CONFIG_PM |
| |
| /** |
| * mmc_suspend_host - suspend a host |
| * @host: mmc host |
| * @state: suspend mode (PM_SUSPEND_xxx) |
| */ |
| int mmc_suspend_host(struct mmc_host *host, pm_message_t state) |
| { |
| mmc_claim_host(host); |
| mmc_deselect_cards(host); |
| mmc_power_off(host); |
| mmc_release_host(host); |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(mmc_suspend_host); |
| |
| /** |
| * mmc_resume_host - resume a previously suspended host |
| * @host: mmc host |
| */ |
| int mmc_resume_host(struct mmc_host *host) |
| { |
| mmc_rescan(&host->detect.work); |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(mmc_resume_host); |
| |
| #endif |
| |
| MODULE_LICENSE("GPL"); |