| /* |
| * Embedded Planet 405GP board |
| * http://www.embeddedplanet.com |
| * |
| * Author: Matthew Locke <mlocke@mvista.com> |
| * |
| * 2001 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <asm/system.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/todc.h> |
| #include <asm/ocp.h> |
| #include <asm/ibm_ocp_pci.h> |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| u8 *ep405_bcsr; |
| u8 *ep405_nvram; |
| |
| static struct { |
| u8 cpld_xirq_select; |
| int pci_idsel; |
| int irq; |
| } ep405_devtable[] = { |
| #ifdef CONFIG_EP405PC |
| {0x07, 0x0E, 25}, /* EP405PC: USB */ |
| #endif |
| }; |
| |
| int __init |
| ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) |
| { |
| int i; |
| |
| /* AFAICT this is only called a few times during PCI setup, so |
| performance is not critical */ |
| for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) { |
| if (idsel == ep405_devtable[i].pci_idsel) |
| return ep405_devtable[i].irq; |
| } |
| return -1; |
| }; |
| |
| void __init |
| ep405_setup_arch(void) |
| { |
| ppc4xx_setup_arch(); |
| |
| ibm_ocp_set_emac(0, 0); |
| |
| if (__res.bi_nvramsize == 512*1024) { |
| /* FIXME: we should properly handle NVRTCs of different sizes */ |
| TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8); |
| } |
| } |
| |
| void __init |
| bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) |
| { |
| #ifdef CONFIG_PCI |
| unsigned int bar_response, bar; |
| /* |
| * Expected PCI mapping: |
| * |
| * PLB addr PCI memory addr |
| * --------------------- --------------------- |
| * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff |
| * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff |
| * |
| * PLB addr PCI io addr |
| * --------------------- --------------------- |
| * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 |
| * |
| */ |
| |
| /* Disable region zero first */ |
| out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); |
| /* PLB starting addr, PCI: 0x80000000 */ |
| out_le32((void *) &(pcip->pmm[0].la), 0x80000000); |
| /* PCI start addr, 0x80000000 */ |
| out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); |
| /* 512MB range of PLB to PCI */ |
| out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); |
| /* Enable no pre-fetch, enable region */ |
| out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - |
| (PPC405_PCI_UPPER_MEM - |
| PPC405_PCI_MEM_BASE)) | 0x01)); |
| |
| /* Disable region one */ |
| out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); |
| out_le32((void *) &(pcip->pmm[1].la), 0x00000000); |
| out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); |
| out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); |
| out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); |
| out_le32((void *) &(pcip->ptm1ms), 0x00000000); |
| |
| /* Disable region two */ |
| out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); |
| out_le32((void *) &(pcip->pmm[2].la), 0x00000000); |
| out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); |
| out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); |
| out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); |
| out_le32((void *) &(pcip->ptm2ms), 0x00000000); |
| |
| /* Configure PTM (PCI->PLB) region 1 */ |
| out_le32((void *) &(pcip->ptm1la), 0x00000000); /* PLB base address */ |
| /* Disable PTM region 2 */ |
| out_le32((void *) &(pcip->ptm2ms), 0x00000000); |
| |
| /* Zero config bars */ |
| for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { |
| early_write_config_dword(hose, hose->first_busno, |
| PCI_FUNC(hose->first_busno), bar, |
| 0x00000000); |
| early_read_config_dword(hose, hose->first_busno, |
| PCI_FUNC(hose->first_busno), bar, |
| &bar_response); |
| DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", |
| hose->first_busno, PCI_SLOT(hose->first_busno), |
| PCI_FUNC(hose->first_busno), bar, bar_response); |
| } |
| /* end workaround */ |
| #endif |
| } |
| |
| void __init |
| ep405_map_io(void) |
| { |
| bd_t *bip = &__res; |
| |
| ppc4xx_map_io(); |
| |
| ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE); |
| |
| if (bip->bi_nvramsize > 0) { |
| ep405_nvram = ioremap(EP405_NVRAM_PADDR, bip->bi_nvramsize); |
| } |
| } |
| |
| void __init |
| ep405_init_IRQ(void) |
| { |
| int i; |
| |
| ppc4xx_init_IRQ(); |
| |
| /* Workaround for a bug in the firmware it incorrectly sets |
| the IRQ polarities for XIRQ0 and XIRQ1 */ |
| mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */ |
| mtdcr(DCRN_UIC_SR(DCRN_UIC0_BASE), 0x00000060); /* clear bogus interrupts */ |
| |
| /* Activate the XIRQs from the CPLD */ |
| writeb(0xf0, ep405_bcsr+10); |
| |
| /* Set up IRQ routing */ |
| for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) { |
| if ( (ep405_devtable[i].irq >= 25) |
| && (ep405_devtable[i].irq) <= 31) { |
| writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5); |
| writeb(ep405_devtable[i].irq - 25, ep405_bcsr+6); |
| } |
| } |
| } |
| |
| void __init |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, unsigned long r7) |
| { |
| ppc4xx_init(r3, r4, r5, r6, r7); |
| |
| ppc_md.setup_arch = ep405_setup_arch; |
| ppc_md.setup_io_mappings = ep405_map_io; |
| ppc_md.init_IRQ = ep405_init_IRQ; |
| |
| ppc_md.nvram_read_val = todc_direct_read_val; |
| ppc_md.nvram_write_val = todc_direct_write_val; |
| |
| if (__res.bi_nvramsize == 512*1024) { |
| ppc_md.time_init = todc_time_init; |
| ppc_md.set_rtc_time = todc_set_rtc_time; |
| ppc_md.get_rtc_time = todc_get_rtc_time; |
| } else { |
| printk("EP405: NVRTC size is not 512k (not a DS1557). Not sure what to do with it\n"); |
| } |
| } |