| /* |
| * Workaround for device erratum PCI 9. |
| * See Motorola's "XPC826xA Family Device Errata Reference." |
| * The erratum applies to all 8260 family Hip4 processors. It is scheduled |
| * to be fixed in HiP4 Rev C. Erratum PCI 9 states that a simultaneous PCI |
| * inbound write transaction and PCI outbound read transaction can result in a |
| * bus deadlock. The suggested workaround is to use the IDMA controller to |
| * perform all reads from PCI configuration, memory, and I/O space. |
| * |
| * Author: andy_lowe@mvista.com |
| * |
| * 2003 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| |
| #include <asm/io.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/byteorder.h> |
| #include <asm/mpc8260.h> |
| #include <asm/immap_cpm2.h> |
| #include <asm/cpm2.h> |
| |
| #include "m82xx_pci.h" |
| |
| #ifdef CONFIG_8260_PCI9 |
| /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */ |
| |
| #define IDMA_XFER_BUF_SIZE 64 /* size of the IDMA transfer buffer */ |
| |
| /* define a structure for the IDMA dpram usage */ |
| typedef struct idma_dpram_s { |
| idma_t pram; /* IDMA parameter RAM */ |
| u_char xfer_buf[IDMA_XFER_BUF_SIZE]; /* IDMA transfer buffer */ |
| idma_bd_t bd; /* buffer descriptor */ |
| } idma_dpram_t; |
| |
| /* define offsets relative to start of IDMA dpram */ |
| #define IDMA_XFER_BUF_OFFSET (sizeof(idma_t)) |
| #define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE) |
| |
| /* define globals */ |
| static volatile idma_dpram_t *idma_dpram; |
| |
| /* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, |
| * where n is 1, 2, 3, or 4. This selects the IDMA channel used for |
| * the PCI9 workaround. |
| */ |
| #ifdef CONFIG_8260_PCI9_IDMA1 |
| #define IDMA_CHAN 0 |
| #define PROFF_IDMA PROFF_IDMA1_BASE |
| #define IDMA_PAGE CPM_CR_IDMA1_PAGE |
| #define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK |
| #endif |
| #ifdef CONFIG_8260_PCI9_IDMA2 |
| #define IDMA_CHAN 1 |
| #define PROFF_IDMA PROFF_IDMA2_BASE |
| #define IDMA_PAGE CPM_CR_IDMA2_PAGE |
| #define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK |
| #endif |
| #ifdef CONFIG_8260_PCI9_IDMA3 |
| #define IDMA_CHAN 2 |
| #define PROFF_IDMA PROFF_IDMA3_BASE |
| #define IDMA_PAGE CPM_CR_IDMA3_PAGE |
| #define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK |
| #endif |
| #ifdef CONFIG_8260_PCI9_IDMA4 |
| #define IDMA_CHAN 3 |
| #define PROFF_IDMA PROFF_IDMA4_BASE |
| #define IDMA_PAGE CPM_CR_IDMA4_PAGE |
| #define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK |
| #endif |
| |
| void idma_pci9_init(void) |
| { |
| uint dpram_offset; |
| volatile idma_t *pram; |
| volatile im_idma_t *idma_reg; |
| volatile cpm2_map_t *immap = cpm2_immr; |
| |
| /* allocate IDMA dpram */ |
| dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64); |
| idma_dpram = cpm_dpram_addr(dpram_offset); |
| |
| /* initialize the IDMA parameter RAM */ |
| memset((void *)idma_dpram, 0, sizeof(idma_dpram_t)); |
| pram = &idma_dpram->pram; |
| pram->ibase = dpram_offset + IDMA_BD_OFFSET; |
| pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET; |
| pram->ss_max = 32; |
| pram->dts = 32; |
| |
| /* initialize the IDMA_BASE pointer to the IDMA parameter RAM */ |
| *((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset; |
| |
| /* initialize the IDMA registers */ |
| idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1; |
| idma_reg[IDMA_CHAN].idmr = 0; /* mask all IDMA interrupts */ |
| idma_reg[IDMA_CHAN].idsr = 0xff; /* clear all event flags */ |
| |
| printk(KERN_WARNING |
| "Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n", |
| IDMA_CHAN + 1); |
| |
| return; |
| } |
| |
| /* Use the IDMA controller to transfer data from I/O memory to local RAM. |
| * The src address must be a physical address suitable for use by the DMA |
| * controller with no translation. The dst address must be a kernel virtual |
| * address. The dst address is translated to a physical address via |
| * virt_to_phys(). |
| * The sinc argument specifies whether or not the source address is incremented |
| * by the DMA controller. The source address is incremented if and only if sinc |
| * is non-zero. The destination address is always incremented since the |
| * destination is always host RAM. |
| */ |
| static void |
| idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc) |
| { |
| unsigned long flags; |
| volatile idma_t *pram = &idma_dpram->pram; |
| volatile idma_bd_t *bd = &idma_dpram->bd; |
| volatile cpm2_map_t *immap = cpm2_immr; |
| |
| local_irq_save(flags); |
| |
| /* initialize IDMA parameter RAM for this transfer */ |
| if (sinc) |
| pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC |
| | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM; |
| else |
| pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC |
| | IDMA_DCM_SD_MEM2MEM; |
| pram->ibdptr = pram->ibase; |
| pram->sts = unit_size; |
| pram->istate = 0; |
| |
| /* initialize the buffer descriptor */ |
| bd->dst = virt_to_phys(dst); |
| bd->src = (uint) src; |
| bd->len = bytes; |
| bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL |
| | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB; |
| |
| /* issue the START_IDMA command to the CP */ |
| while (immap->im_cpm.cp_cpcr & CPM_CR_FLG); |
| immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0, |
| CPM_CR_START_IDMA) | CPM_CR_FLG; |
| while (immap->im_cpm.cp_cpcr & CPM_CR_FLG); |
| |
| /* wait for transfer to complete */ |
| while(bd->flags & IDMA_BD_V); |
| |
| local_irq_restore(flags); |
| |
| return; |
| } |
| |
| /* Use the IDMA controller to transfer data from I/O memory to local RAM. |
| * The dst address must be a physical address suitable for use by the DMA |
| * controller with no translation. The src address must be a kernel virtual |
| * address. The src address is translated to a physical address via |
| * virt_to_phys(). |
| * The dinc argument specifies whether or not the dest address is incremented |
| * by the DMA controller. The source address is incremented if and only if sinc |
| * is non-zero. The source address is always incremented since the |
| * source is always host RAM. |
| */ |
| static void |
| idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc) |
| { |
| unsigned long flags; |
| volatile idma_t *pram = &idma_dpram->pram; |
| volatile idma_bd_t *bd = &idma_dpram->bd; |
| volatile cpm2_map_t *immap = cpm2_immr; |
| |
| local_irq_save(flags); |
| |
| /* initialize IDMA parameter RAM for this transfer */ |
| if (dinc) |
| pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC |
| | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM; |
| else |
| pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC |
| | IDMA_DCM_SD_MEM2MEM; |
| pram->ibdptr = pram->ibase; |
| pram->sts = unit_size; |
| pram->istate = 0; |
| |
| /* initialize the buffer descriptor */ |
| bd->dst = (uint) dst; |
| bd->src = virt_to_phys(src); |
| bd->len = bytes; |
| bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL |
| | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB; |
| |
| /* issue the START_IDMA command to the CP */ |
| while (immap->im_cpm.cp_cpcr & CPM_CR_FLG); |
| immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0, |
| CPM_CR_START_IDMA) | CPM_CR_FLG; |
| while (immap->im_cpm.cp_cpcr & CPM_CR_FLG); |
| |
| /* wait for transfer to complete */ |
| while(bd->flags & IDMA_BD_V); |
| |
| local_irq_restore(flags); |
| |
| return; |
| } |
| |
| /* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed |
| * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if |
| * the unit_size is 4. |
| */ |
| static void |
| idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc) |
| { |
| int i; |
| u8 *p; |
| |
| idma_pci9_read(dst, src, bytes, unit_size, sinc); |
| switch(unit_size) { |
| case 2: |
| for (i = 0, p = dst; i < bytes; i += 2, p += 2) |
| swab16s((u16 *) p); |
| break; |
| case 4: |
| for (i = 0, p = dst; i < bytes; i += 4, p += 4) |
| swab32s((u32 *) p); |
| break; |
| default: |
| break; |
| } |
| } |
| EXPORT_SYMBOL(idma_pci9_init); |
| EXPORT_SYMBOL(idma_pci9_read); |
| EXPORT_SYMBOL(idma_pci9_read_le); |
| |
| static inline int is_pci_mem(unsigned long addr) |
| { |
| if (addr >= M82xx_PCI_LOWER_MMIO && |
| addr <= M82xx_PCI_UPPER_MMIO) |
| return 1; |
| if (addr >= M82xx_PCI_LOWER_MEM && |
| addr <= M82xx_PCI_UPPER_MEM) |
| return 1; |
| return 0; |
| } |
| |
| #define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000)) |
| int readb(volatile unsigned char *addr) |
| { |
| u8 val; |
| unsigned long pa = iopa((unsigned long) addr); |
| |
| if (!is_pci_mem(pa)) |
| return in_8(addr); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0); |
| return val; |
| } |
| |
| int readw(volatile unsigned short *addr) |
| { |
| u16 val; |
| unsigned long pa = iopa((unsigned long) addr); |
| |
| if (!is_pci_mem(pa)) |
| return in_le16(addr); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0); |
| return swab16(val); |
| } |
| |
| unsigned readl(volatile unsigned *addr) |
| { |
| u32 val; |
| unsigned long pa = iopa((unsigned long) addr); |
| |
| if (!is_pci_mem(pa)) |
| return in_le32(addr); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0); |
| return swab32(val); |
| } |
| |
| int inb(unsigned port) |
| { |
| u8 val; |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0); |
| return val; |
| } |
| |
| int inw(unsigned port) |
| { |
| u16 val; |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0); |
| return swab16(val); |
| } |
| |
| unsigned inl(unsigned port) |
| { |
| u32 val; |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0); |
| return swab32(val); |
| } |
| |
| void insb(unsigned port, void *buf, int ns) |
| { |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0); |
| } |
| |
| void insw(unsigned port, void *buf, int ns) |
| { |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0); |
| } |
| |
| void insl(unsigned port, void *buf, int nl) |
| { |
| u8 *addr = (u8 *)(port + _IO_BASE); |
| |
| idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0); |
| } |
| |
| void *memcpy_fromio(void *dest, unsigned long src, size_t count) |
| { |
| unsigned long pa = iopa((unsigned long) src); |
| |
| if (is_pci_mem(pa)) |
| idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1); |
| else |
| memcpy(dest, (void *)src, count); |
| return dest; |
| } |
| |
| EXPORT_SYMBOL(readb); |
| EXPORT_SYMBOL(readw); |
| EXPORT_SYMBOL(readl); |
| EXPORT_SYMBOL(inb); |
| EXPORT_SYMBOL(inw); |
| EXPORT_SYMBOL(inl); |
| EXPORT_SYMBOL(insb); |
| EXPORT_SYMBOL(insw); |
| EXPORT_SYMBOL(insl); |
| EXPORT_SYMBOL(memcpy_fromio); |
| |
| #endif /* ifdef CONFIG_8260_PCI9 */ |
| |
| /* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c. |
| * Copyright (C) 1998 Gabriel Paubert. |
| */ |
| #ifndef CONFIG_8260_PCI9 |
| #define cfg_read(val, addr, type, op) *val = op((type)(addr)) |
| #else |
| #define cfg_read(val, addr, type, op) \ |
| idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0) |
| #endif |
| |
| #define cfg_write(val, addr, type, op) op((type *)(addr), (val)) |
| |
| static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where, |
| int size, u32 value) |
| { |
| struct pci_controller *hose = pbus->sysdata; |
| u8 cfg_type = 0; |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(pbus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (hose->set_cfg_type) |
| if (pbus->number != hose->first_busno) |
| cfg_type = 1; |
| |
| out_be32(hose->cfg_addr, |
| (((where & 0xfc) | cfg_type) << 24) | (devfn << 16) |
| | ((pbus->number - hose->bus_offset) << 8) | 0x80); |
| |
| switch (size) |
| { |
| case 1: |
| cfg_write(value, hose->cfg_data + (where & 3), u8, out_8); |
| break; |
| case 2: |
| cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16); |
| break; |
| case 4: |
| cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where, |
| int size, u32 *value) |
| { |
| struct pci_controller *hose = pbus->sysdata; |
| u8 cfg_type = 0; |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(pbus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (hose->set_cfg_type) |
| if (pbus->number != hose->first_busno) |
| cfg_type = 1; |
| |
| out_be32(hose->cfg_addr, |
| (((where & 0xfc) | cfg_type) << 24) | (devfn << 16) |
| | ((pbus->number - hose->bus_offset) << 8) | 0x80); |
| |
| switch (size) |
| { |
| case 1: |
| cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8); |
| break; |
| case 2: |
| cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16); |
| break; |
| case 4: |
| cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops indirect_pci_ops = |
| { |
| .read = indirect_read_config, |
| .write = indirect_write_config, |
| }; |
| |
| void |
| setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) |
| { |
| hose->ops = &indirect_pci_ops; |
| hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4); |
| hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4); |
| } |