| /* |
| * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) |
| * Licensed under the GPL |
| */ |
| |
| #include "linux/sched.h" |
| #include "linux/slab.h" |
| #include "linux/list.h" |
| #include "linux/kd.h" |
| #include "linux/interrupt.h" |
| #include "linux/devfs_fs_kernel.h" |
| #include "asm/uaccess.h" |
| #include "chan_kern.h" |
| #include "irq_user.h" |
| #include "line.h" |
| #include "kern.h" |
| #include "user_util.h" |
| #include "kern_util.h" |
| #include "os.h" |
| #include "irq_kern.h" |
| |
| #define LINE_BUFSIZE 4096 |
| |
| static irqreturn_t line_interrupt(int irq, void *data, struct pt_regs *unused) |
| { |
| struct tty_struct *tty = data; |
| struct line *line = tty->driver_data; |
| |
| if (line) |
| chan_interrupt(&line->chan_list, &line->task, tty, irq); |
| return IRQ_HANDLED; |
| } |
| |
| static void line_timer_cb(void *arg) |
| { |
| struct tty_struct *tty = arg; |
| struct line *line = tty->driver_data; |
| |
| line_interrupt(line->driver->read_irq, arg, NULL); |
| } |
| |
| /* Returns the free space inside the ring buffer of this line. |
| * |
| * Should be called while holding line->lock (this does not modify datas). |
| */ |
| static int write_room(struct line *line) |
| { |
| int n; |
| |
| if (line->buffer == NULL) |
| return LINE_BUFSIZE - 1; |
| |
| /* This is for the case where the buffer is wrapped! */ |
| n = line->head - line->tail; |
| |
| if (n <= 0) |
| n = LINE_BUFSIZE + n; /* The other case */ |
| return n - 1; |
| } |
| |
| int line_write_room(struct tty_struct *tty) |
| { |
| struct line *line = tty->driver_data; |
| unsigned long flags; |
| int room; |
| |
| if (tty->stopped) |
| return 0; |
| |
| spin_lock_irqsave(&line->lock, flags); |
| room = write_room(line); |
| spin_unlock_irqrestore(&line->lock, flags); |
| |
| /*XXX: Warning to remove */ |
| if (0 == room) |
| printk(KERN_DEBUG "%s: %s: no room left in buffer\n", |
| __FUNCTION__,tty->name); |
| return room; |
| } |
| |
| int line_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct line *line = tty->driver_data; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&line->lock, flags); |
| |
| /*write_room subtracts 1 for the needed NULL, so we readd it.*/ |
| ret = LINE_BUFSIZE - (write_room(line) + 1); |
| spin_unlock_irqrestore(&line->lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * This copies the content of buf into the circular buffer associated with |
| * this line. |
| * The return value is the number of characters actually copied, i.e. the ones |
| * for which there was space: this function is not supposed to ever flush out |
| * the circular buffer. |
| * |
| * Must be called while holding line->lock! |
| */ |
| static int buffer_data(struct line *line, const char *buf, int len) |
| { |
| int end, room; |
| |
| if(line->buffer == NULL){ |
| line->buffer = kmalloc(LINE_BUFSIZE, GFP_ATOMIC); |
| if (line->buffer == NULL) { |
| printk("buffer_data - atomic allocation failed\n"); |
| return(0); |
| } |
| line->head = line->buffer; |
| line->tail = line->buffer; |
| } |
| |
| room = write_room(line); |
| len = (len > room) ? room : len; |
| |
| end = line->buffer + LINE_BUFSIZE - line->tail; |
| |
| if (len < end){ |
| memcpy(line->tail, buf, len); |
| line->tail += len; |
| } else { |
| /* The circular buffer is wrapping */ |
| memcpy(line->tail, buf, end); |
| buf += end; |
| memcpy(line->buffer, buf, len - end); |
| line->tail = line->buffer + len - end; |
| } |
| |
| return len; |
| } |
| |
| /* |
| * Flushes the ring buffer to the output channels. That is, write_chan is |
| * called, passing it line->head as buffer, and an appropriate count. |
| * |
| * On exit, returns 1 when the buffer is empty, |
| * 0 when the buffer is not empty on exit, |
| * and -errno when an error occurred. |
| * |
| * Must be called while holding line->lock!*/ |
| static int flush_buffer(struct line *line) |
| { |
| int n, count; |
| |
| if ((line->buffer == NULL) || (line->head == line->tail)) |
| return 1; |
| |
| if (line->tail < line->head) { |
| /* line->buffer + LINE_BUFSIZE is the end of the buffer! */ |
| count = line->buffer + LINE_BUFSIZE - line->head; |
| |
| n = write_chan(&line->chan_list, line->head, count, |
| line->driver->write_irq); |
| if (n < 0) |
| return n; |
| if (n == count) { |
| /* We have flushed from ->head to buffer end, now we |
| * must flush only from the beginning to ->tail.*/ |
| line->head = line->buffer; |
| } else { |
| line->head += n; |
| return 0; |
| } |
| } |
| |
| count = line->tail - line->head; |
| n = write_chan(&line->chan_list, line->head, count, |
| line->driver->write_irq); |
| |
| if(n < 0) |
| return n; |
| |
| line->head += n; |
| return line->head == line->tail; |
| } |
| |
| void line_flush_buffer(struct tty_struct *tty) |
| { |
| struct line *line = tty->driver_data; |
| unsigned long flags; |
| int err; |
| |
| /*XXX: copied from line_write, verify if it is correct!*/ |
| if(tty->stopped) |
| return; |
| //return 0; |
| |
| spin_lock_irqsave(&line->lock, flags); |
| err = flush_buffer(line); |
| /*if (err == 1) |
| err = 0;*/ |
| spin_unlock_irqrestore(&line->lock, flags); |
| //return err; |
| } |
| |
| /* We map both ->flush_chars and ->put_char (which go in pair) onto ->flush_buffer |
| * and ->write. Hope it's not that bad.*/ |
| void line_flush_chars(struct tty_struct *tty) |
| { |
| line_flush_buffer(tty); |
| } |
| |
| void line_put_char(struct tty_struct *tty, unsigned char ch) |
| { |
| line_write(tty, &ch, sizeof(ch)); |
| } |
| |
| int line_write(struct tty_struct *tty, const unsigned char *buf, int len) |
| { |
| struct line *line = tty->driver_data; |
| unsigned long flags; |
| int n, err, ret = 0; |
| |
| if(tty->stopped) |
| return 0; |
| |
| spin_lock_irqsave(&line->lock, flags); |
| if (line->head != line->tail) { |
| ret = buffer_data(line, buf, len); |
| err = flush_buffer(line); |
| if (err <= 0 && (err != -EAGAIN || !ret)) |
| ret = err; |
| } else { |
| n = write_chan(&line->chan_list, buf, len, |
| line->driver->write_irq); |
| if (n < 0) { |
| ret = n; |
| goto out_up; |
| } |
| |
| len -= n; |
| ret += n; |
| if (len > 0) |
| ret += buffer_data(line, buf + n, len); |
| } |
| out_up: |
| spin_unlock_irqrestore(&line->lock, flags); |
| return ret; |
| } |
| |
| void line_set_termios(struct tty_struct *tty, struct termios * old) |
| { |
| /* nothing */ |
| } |
| |
| static struct { |
| int cmd; |
| char *level; |
| char *name; |
| } tty_ioctls[] = { |
| /* don't print these, they flood the log ... */ |
| { TCGETS, NULL, "TCGETS" }, |
| { TCSETS, NULL, "TCSETS" }, |
| { TCSETSW, NULL, "TCSETSW" }, |
| { TCFLSH, NULL, "TCFLSH" }, |
| { TCSBRK, NULL, "TCSBRK" }, |
| |
| /* general tty stuff */ |
| { TCSETSF, KERN_DEBUG, "TCSETSF" }, |
| { TCGETA, KERN_DEBUG, "TCGETA" }, |
| { TIOCMGET, KERN_DEBUG, "TIOCMGET" }, |
| { TCSBRKP, KERN_DEBUG, "TCSBRKP" }, |
| { TIOCMSET, KERN_DEBUG, "TIOCMSET" }, |
| |
| /* linux-specific ones */ |
| { TIOCLINUX, KERN_INFO, "TIOCLINUX" }, |
| { KDGKBMODE, KERN_INFO, "KDGKBMODE" }, |
| { KDGKBTYPE, KERN_INFO, "KDGKBTYPE" }, |
| { KDSIGACCEPT, KERN_INFO, "KDSIGACCEPT" }, |
| }; |
| |
| int line_ioctl(struct tty_struct *tty, struct file * file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int ret; |
| int i; |
| |
| ret = 0; |
| switch(cmd) { |
| #ifdef TIOCGETP |
| case TIOCGETP: |
| case TIOCSETP: |
| case TIOCSETN: |
| #endif |
| #ifdef TIOCGETC |
| case TIOCGETC: |
| case TIOCSETC: |
| #endif |
| #ifdef TIOCGLTC |
| case TIOCGLTC: |
| case TIOCSLTC: |
| #endif |
| case TCGETS: |
| case TCSETSF: |
| case TCSETSW: |
| case TCSETS: |
| case TCGETA: |
| case TCSETAF: |
| case TCSETAW: |
| case TCSETA: |
| case TCXONC: |
| case TCFLSH: |
| case TIOCOUTQ: |
| case TIOCINQ: |
| case TIOCGLCKTRMIOS: |
| case TIOCSLCKTRMIOS: |
| case TIOCPKT: |
| case TIOCGSOFTCAR: |
| case TIOCSSOFTCAR: |
| return -ENOIOCTLCMD; |
| #if 0 |
| case TCwhatever: |
| /* do something */ |
| break; |
| #endif |
| default: |
| for (i = 0; i < ARRAY_SIZE(tty_ioctls); i++) |
| if (cmd == tty_ioctls[i].cmd) |
| break; |
| if (i < ARRAY_SIZE(tty_ioctls)) { |
| if (NULL != tty_ioctls[i].level) |
| printk("%s%s: %s: ioctl %s called\n", |
| tty_ioctls[i].level, __FUNCTION__, |
| tty->name, tty_ioctls[i].name); |
| } else { |
| printk(KERN_ERR "%s: %s: unknown ioctl: 0x%x\n", |
| __FUNCTION__, tty->name, cmd); |
| } |
| ret = -ENOIOCTLCMD; |
| break; |
| } |
| return ret; |
| } |
| |
| static irqreturn_t line_write_interrupt(int irq, void *data, |
| struct pt_regs *unused) |
| { |
| struct tty_struct *tty = data; |
| struct line *line = tty->driver_data; |
| int err; |
| |
| /* Interrupts are enabled here because we registered the interrupt with |
| * SA_INTERRUPT (see line_setup_irq).*/ |
| |
| spin_lock_irq(&line->lock); |
| err = flush_buffer(line); |
| if (err == 0) { |
| return IRQ_NONE; |
| } else if(err < 0) { |
| line->head = line->buffer; |
| line->tail = line->buffer; |
| } |
| spin_unlock_irq(&line->lock); |
| |
| if(tty == NULL) |
| return IRQ_NONE; |
| |
| if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && |
| (tty->ldisc.write_wakeup != NULL)) |
| (tty->ldisc.write_wakeup)(tty); |
| |
| /* BLOCKING mode |
| * In blocking mode, everything sleeps on tty->write_wait. |
| * Sleeping in the console driver would break non-blocking |
| * writes. |
| */ |
| |
| if (waitqueue_active(&tty->write_wait)) |
| wake_up_interruptible(&tty->write_wait); |
| return IRQ_HANDLED; |
| } |
| |
| int line_setup_irq(int fd, int input, int output, struct tty_struct *tty) |
| { |
| struct line *line = tty->driver_data; |
| struct line_driver *driver = line->driver; |
| int err = 0, flags = SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM; |
| |
| if (input) |
| err = um_request_irq(driver->read_irq, fd, IRQ_READ, |
| line_interrupt, flags, |
| driver->read_irq_name, tty); |
| if (err) |
| return err; |
| if (output) |
| err = um_request_irq(driver->write_irq, fd, IRQ_WRITE, |
| line_write_interrupt, flags, |
| driver->write_irq_name, tty); |
| line->have_irq = 1; |
| return err; |
| } |
| |
| void line_disable(struct tty_struct *tty, int current_irq) |
| { |
| struct line *line = tty->driver_data; |
| |
| if(!line->have_irq) |
| return; |
| |
| if(line->driver->read_irq == current_irq) |
| free_irq_later(line->driver->read_irq, tty); |
| else { |
| free_irq_by_irq_and_dev(line->driver->read_irq, tty); |
| free_irq(line->driver->read_irq, tty); |
| } |
| |
| if(line->driver->write_irq == current_irq) |
| free_irq_later(line->driver->write_irq, tty); |
| else { |
| free_irq_by_irq_and_dev(line->driver->write_irq, tty); |
| free_irq(line->driver->write_irq, tty); |
| } |
| |
| line->have_irq = 0; |
| } |
| |
| int line_open(struct line *lines, struct tty_struct *tty, |
| struct chan_opts *opts) |
| { |
| struct line *line; |
| int err = 0; |
| |
| line = &lines[tty->index]; |
| tty->driver_data = line; |
| |
| /* The IRQ which takes this lock is not yet enabled and won't be run |
| * before the end, so we don't need to use spin_lock_irq.*/ |
| spin_lock(&line->lock); |
| if (tty->count == 1) { |
| if (!line->valid) { |
| err = -ENODEV; |
| goto out; |
| } |
| if (list_empty(&line->chan_list)) { |
| err = parse_chan_pair(line->init_str, &line->chan_list, |
| line->init_pri, tty->index, opts); |
| if(err) goto out; |
| err = open_chan(&line->chan_list); |
| if(err) goto out; |
| } |
| /* Here the interrupt is registered.*/ |
| enable_chan(&line->chan_list, tty); |
| INIT_WORK(&line->task, line_timer_cb, tty); |
| } |
| |
| if(!line->sigio){ |
| chan_enable_winch(&line->chan_list, tty); |
| line->sigio = 1; |
| } |
| chan_window_size(&line->chan_list, &tty->winsize.ws_row, |
| &tty->winsize.ws_col); |
| line->count++; |
| |
| out: |
| spin_unlock(&line->lock); |
| return err; |
| } |
| |
| static void unregister_winch(struct tty_struct *tty); |
| |
| void line_close(struct tty_struct *tty, struct file * filp) |
| { |
| struct line *line = tty->driver_data; |
| |
| /* XXX: I assume this should be called in process context, not with |
| * interrupts disabled! |
| */ |
| spin_lock_irq(&line->lock); |
| |
| /* We ignore the error anyway! */ |
| flush_buffer(line); |
| |
| line->count--; |
| if (tty->count == 1) { |
| line_disable(tty, -1); |
| tty->driver_data = NULL; |
| } |
| |
| if((line->count == 0) && line->sigio){ |
| unregister_winch(tty); |
| line->sigio = 0; |
| } |
| |
| spin_unlock_irq(&line->lock); |
| } |
| |
| void close_lines(struct line *lines, int nlines) |
| { |
| int i; |
| |
| for(i = 0; i < nlines; i++) |
| close_chan(&lines[i].chan_list); |
| } |
| |
| /* Common setup code for both startup command line and mconsole initialization. |
| * @lines contains the the array (of size @num) to modify; |
| * @init is the setup string; |
| * @all_allowed is a boolean saying if we can setup the whole @lines |
| * at once. For instance, it will be usually true for startup init. (where we |
| * can use con=xterm) and false for mconsole.*/ |
| |
| int line_setup(struct line *lines, unsigned int num, char *init, int all_allowed) |
| { |
| int i, n; |
| char *end; |
| |
| if(*init == '=') { |
| /* We said con=/ssl= instead of con#=, so we are configuring all |
| * consoles at once.*/ |
| n = -1; |
| } else { |
| n = simple_strtoul(init, &end, 0); |
| if(*end != '='){ |
| printk(KERN_ERR "line_setup failed to parse \"%s\"\n", |
| init); |
| return 0; |
| } |
| init = end; |
| } |
| init++; |
| |
| if (n >= (signed int) num) { |
| printk("line_setup - %d out of range ((0 ... %d) allowed)\n", |
| n, num - 1); |
| return 0; |
| } else if (n >= 0){ |
| if (lines[n].count > 0) { |
| printk("line_setup - device %d is open\n", n); |
| return 0; |
| } |
| if (lines[n].init_pri <= INIT_ONE){ |
| lines[n].init_pri = INIT_ONE; |
| if (!strcmp(init, "none")) |
| lines[n].valid = 0; |
| else { |
| lines[n].init_str = init; |
| lines[n].valid = 1; |
| } |
| } |
| } else if(!all_allowed){ |
| printk("line_setup - can't configure all devices from " |
| "mconsole\n"); |
| return 0; |
| } else { |
| for(i = 0; i < num; i++){ |
| if(lines[i].init_pri <= INIT_ALL){ |
| lines[i].init_pri = INIT_ALL; |
| if(!strcmp(init, "none")) lines[i].valid = 0; |
| else { |
| lines[i].init_str = init; |
| lines[i].valid = 1; |
| } |
| } |
| } |
| } |
| return 1; |
| } |
| |
| int line_config(struct line *lines, unsigned int num, char *str) |
| { |
| char *new = uml_strdup(str); |
| |
| if(new == NULL){ |
| printk("line_config - uml_strdup failed\n"); |
| return -ENOMEM; |
| } |
| return !line_setup(lines, num, new, 0); |
| } |
| |
| int line_get_config(char *name, struct line *lines, unsigned int num, char *str, |
| int size, char **error_out) |
| { |
| struct line *line; |
| char *end; |
| int dev, n = 0; |
| |
| dev = simple_strtoul(name, &end, 0); |
| if((*end != '\0') || (end == name)){ |
| *error_out = "line_get_config failed to parse device number"; |
| return 0; |
| } |
| |
| if((dev < 0) || (dev >= num)){ |
| *error_out = "device number out of range"; |
| return 0; |
| } |
| |
| line = &lines[dev]; |
| |
| spin_lock(&line->lock); |
| if(!line->valid) |
| CONFIG_CHUNK(str, size, n, "none", 1); |
| else if(line->count == 0) |
| CONFIG_CHUNK(str, size, n, line->init_str, 1); |
| else n = chan_config_string(&line->chan_list, str, size, error_out); |
| spin_unlock(&line->lock); |
| |
| return n; |
| } |
| |
| int line_remove(struct line *lines, unsigned int num, char *str) |
| { |
| char config[sizeof("conxxxx=none\0")]; |
| |
| sprintf(config, "%s=none", str); |
| return !line_setup(lines, num, config, 0); |
| } |
| |
| struct tty_driver *line_register_devfs(struct lines *set, |
| struct line_driver *line_driver, |
| struct tty_operations *ops, struct line *lines, |
| int nlines) |
| { |
| int i; |
| struct tty_driver *driver = alloc_tty_driver(nlines); |
| |
| if (!driver) |
| return NULL; |
| |
| driver->driver_name = line_driver->name; |
| driver->name = line_driver->device_name; |
| driver->devfs_name = line_driver->devfs_name; |
| driver->major = line_driver->major; |
| driver->minor_start = line_driver->minor_start; |
| driver->type = line_driver->type; |
| driver->subtype = line_driver->subtype; |
| driver->flags = TTY_DRIVER_REAL_RAW; |
| driver->init_termios = tty_std_termios; |
| tty_set_operations(driver, ops); |
| |
| if (tty_register_driver(driver)) { |
| printk("%s: can't register %s driver\n", |
| __FUNCTION__,line_driver->name); |
| put_tty_driver(driver); |
| return NULL; |
| } |
| |
| for(i = 0; i < nlines; i++){ |
| if(!lines[i].valid) |
| tty_unregister_device(driver, i); |
| } |
| |
| mconsole_register_dev(&line_driver->mc); |
| return driver; |
| } |
| |
| void lines_init(struct line *lines, int nlines) |
| { |
| struct line *line; |
| int i; |
| |
| for(i = 0; i < nlines; i++){ |
| line = &lines[i]; |
| INIT_LIST_HEAD(&line->chan_list); |
| spin_lock_init(&line->lock); |
| if(line->init_str != NULL){ |
| line->init_str = uml_strdup(line->init_str); |
| if(line->init_str == NULL) |
| printk("lines_init - uml_strdup returned " |
| "NULL\n"); |
| } |
| } |
| } |
| |
| struct winch { |
| struct list_head list; |
| int fd; |
| int tty_fd; |
| int pid; |
| struct tty_struct *tty; |
| }; |
| |
| irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused) |
| { |
| struct winch *winch = data; |
| struct tty_struct *tty; |
| struct line *line; |
| int err; |
| char c; |
| |
| if(winch->fd != -1){ |
| err = generic_read(winch->fd, &c, NULL); |
| if(err < 0){ |
| if(err != -EAGAIN){ |
| printk("winch_interrupt : read failed, " |
| "errno = %d\n", -err); |
| printk("fd %d is losing SIGWINCH support\n", |
| winch->tty_fd); |
| return IRQ_HANDLED; |
| } |
| goto out; |
| } |
| } |
| tty = winch->tty; |
| if (tty != NULL) { |
| line = tty->driver_data; |
| chan_window_size(&line->chan_list, |
| &tty->winsize.ws_row, |
| &tty->winsize.ws_col); |
| kill_pg(tty->pgrp, SIGWINCH, 1); |
| } |
| out: |
| if(winch->fd != -1) |
| reactivate_fd(winch->fd, WINCH_IRQ); |
| return IRQ_HANDLED; |
| } |
| |
| DECLARE_MUTEX(winch_handler_sem); |
| LIST_HEAD(winch_handlers); |
| |
| void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty) |
| { |
| struct winch *winch; |
| |
| down(&winch_handler_sem); |
| winch = kmalloc(sizeof(*winch), GFP_KERNEL); |
| if (winch == NULL) { |
| printk("register_winch_irq - kmalloc failed\n"); |
| goto out; |
| } |
| *winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list), |
| .fd = fd, |
| .tty_fd = tty_fd, |
| .pid = pid, |
| .tty = tty }); |
| list_add(&winch->list, &winch_handlers); |
| if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, |
| SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, |
| "winch", winch) < 0) |
| printk("register_winch_irq - failed to register IRQ\n"); |
| out: |
| up(&winch_handler_sem); |
| } |
| |
| static void unregister_winch(struct tty_struct *tty) |
| { |
| struct list_head *ele; |
| struct winch *winch, *found = NULL; |
| |
| down(&winch_handler_sem); |
| list_for_each(ele, &winch_handlers){ |
| winch = list_entry(ele, struct winch, list); |
| if(winch->tty == tty){ |
| found = winch; |
| break; |
| } |
| } |
| |
| if(found == NULL) |
| goto out; |
| |
| if(winch->pid != -1) |
| os_kill_process(winch->pid, 1); |
| |
| free_irq_by_irq_and_dev(WINCH_IRQ, winch); |
| free_irq(WINCH_IRQ, winch); |
| list_del(&winch->list); |
| kfree(winch); |
| out: |
| up(&winch_handler_sem); |
| } |
| |
| static void winch_cleanup(void) |
| { |
| struct list_head *ele; |
| struct winch *winch; |
| |
| list_for_each(ele, &winch_handlers){ |
| winch = list_entry(ele, struct winch, list); |
| if(winch->fd != -1){ |
| deactivate_fd(winch->fd, WINCH_IRQ); |
| os_close_file(winch->fd); |
| } |
| if(winch->pid != -1) |
| os_kill_process(winch->pid, 1); |
| } |
| } |
| __uml_exitcall(winch_cleanup); |
| |
| char *add_xterm_umid(char *base) |
| { |
| char *umid, *title; |
| int len; |
| |
| umid = get_umid(1); |
| if(umid == NULL) |
| return base; |
| |
| len = strlen(base) + strlen(" ()") + strlen(umid) + 1; |
| title = kmalloc(len, GFP_KERNEL); |
| if(title == NULL){ |
| printk("Failed to allocate buffer for xterm title\n"); |
| return base; |
| } |
| |
| snprintf(title, len, "%s (%s)", base, umid); |
| return title; |
| } |