| /* |
| v4l2 common internal API header |
| |
| This header contains internal shared ioctl definitions for use by the |
| internal low-level v4l2 drivers. |
| Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal |
| define, |
| |
| Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef V4L2_COMMON_H_ |
| #define V4L2_COMMON_H_ |
| |
| #include <media/v4l2-dev.h> |
| |
| /* Common printk constucts for v4l-i2c drivers. These macros create a unique |
| prefix consisting of the driver name, the adapter number and the i2c |
| address. */ |
| #define v4l_printk(level, name, adapter, addr, fmt, arg...) \ |
| printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) |
| |
| #define v4l_client_printk(level, client, fmt, arg...) \ |
| v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \ |
| (client)->addr, fmt , ## arg) |
| |
| #define v4l_err(client, fmt, arg...) \ |
| v4l_client_printk(KERN_ERR, client, fmt , ## arg) |
| |
| #define v4l_warn(client, fmt, arg...) \ |
| v4l_client_printk(KERN_WARNING, client, fmt , ## arg) |
| |
| #define v4l_info(client, fmt, arg...) \ |
| v4l_client_printk(KERN_INFO, client, fmt , ## arg) |
| |
| /* These three macros assume that the debug level is set with a module |
| parameter called 'debug'. */ |
| #define v4l_dbg(level, debug, client, fmt, arg...) \ |
| do { \ |
| if (debug >= (level)) \ |
| v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ |
| } while (0) |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* These printk constructs can be used with v4l2_device and v4l2_subdev */ |
| #define v4l2_printk(level, dev, fmt, arg...) \ |
| printk(level "%s: " fmt, (dev)->name , ## arg) |
| |
| #define v4l2_err(dev, fmt, arg...) \ |
| v4l2_printk(KERN_ERR, dev, fmt , ## arg) |
| |
| #define v4l2_warn(dev, fmt, arg...) \ |
| v4l2_printk(KERN_WARNING, dev, fmt , ## arg) |
| |
| #define v4l2_info(dev, fmt, arg...) \ |
| v4l2_printk(KERN_INFO, dev, fmt , ## arg) |
| |
| /* These three macros assume that the debug level is set with a module |
| parameter called 'debug'. */ |
| #define v4l2_dbg(level, debug, dev, fmt, arg...) \ |
| do { \ |
| if (debug >= (level)) \ |
| v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ |
| } while (0) |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Control helper functions */ |
| |
| int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl, |
| const char * const *menu_items); |
| const char *v4l2_ctrl_get_name(u32 id); |
| const char * const *v4l2_ctrl_get_menu(u32 id); |
| int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def); |
| int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, |
| struct v4l2_queryctrl *qctrl, const char * const *menu_items); |
| #define V4L2_CTRL_MENU_IDS_END (0xffffffff) |
| int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids); |
| |
| /* Note: ctrl_classes points to an array of u32 pointers. Each u32 array is a |
| 0-terminated array of control IDs. Each array must be sorted low to high |
| and belong to the same control class. The array of u32 pointers must also |
| be sorted, from low class IDs to high class IDs. */ |
| u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id); |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Register/chip ident helper function */ |
| |
| struct i2c_client; /* forward reference */ |
| int v4l2_chip_match_i2c_client(struct i2c_client *c, const struct v4l2_dbg_match *match); |
| int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_dbg_chip_ident *chip, |
| u32 ident, u32 revision); |
| int v4l2_chip_match_host(const struct v4l2_dbg_match *match); |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* I2C Helper functions */ |
| |
| struct i2c_driver; |
| struct i2c_adapter; |
| struct i2c_client; |
| struct i2c_device_id; |
| struct v4l2_device; |
| struct v4l2_subdev; |
| struct v4l2_subdev_ops; |
| |
| |
| /* Load an i2c module and return an initialized v4l2_subdev struct. |
| The client_type argument is the name of the chip that's on the adapter. */ |
| struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, |
| struct i2c_adapter *adapter, const char *client_type, |
| u8 addr, const unsigned short *probe_addrs); |
| |
| struct i2c_board_info; |
| |
| struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, |
| struct i2c_adapter *adapter, struct i2c_board_info *info, |
| const unsigned short *probe_addrs); |
| |
| /* Initialize a v4l2_subdev with data from an i2c_client struct */ |
| void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, |
| const struct v4l2_subdev_ops *ops); |
| /* Return i2c client address of v4l2_subdev. */ |
| unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd); |
| |
| enum v4l2_i2c_tuner_type { |
| ADDRS_RADIO, /* Radio tuner addresses */ |
| ADDRS_DEMOD, /* Demod tuner addresses */ |
| ADDRS_TV, /* TV tuner addresses */ |
| /* TV tuner addresses if demod is present, this excludes |
| addresses used by the demodulator from the list of |
| candidates. */ |
| ADDRS_TV_WITH_DEMOD, |
| }; |
| /* Return a list of I2C tuner addresses to probe. Use only if the tuner |
| addresses are unknown. */ |
| const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* SPI Helper functions */ |
| #if defined(CONFIG_SPI) |
| |
| #include <linux/spi/spi.h> |
| |
| struct spi_device; |
| |
| /* Load an spi module and return an initialized v4l2_subdev struct. |
| The client_type argument is the name of the chip that's on the adapter. */ |
| struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, |
| struct spi_master *master, struct spi_board_info *info); |
| |
| /* Initialize a v4l2_subdev with data from an spi_device struct */ |
| void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, |
| const struct v4l2_subdev_ops *ops); |
| #endif |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Note: these remaining ioctls/structs should be removed as well, but they are |
| still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and |
| v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup |
| is needed in those modules. */ |
| |
| /* s_config */ |
| struct v4l2_priv_tun_config { |
| int tuner; |
| void *priv; |
| }; |
| #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) |
| |
| #define VIDIOC_INT_RESET _IOW ('d', 102, u32) |
| |
| struct v4l2_routing { |
| u32 input; |
| u32 output; |
| }; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Miscellaneous helper functions */ |
| |
| void v4l_bound_align_image(unsigned int *w, unsigned int wmin, |
| unsigned int wmax, unsigned int walign, |
| unsigned int *h, unsigned int hmin, |
| unsigned int hmax, unsigned int halign, |
| unsigned int salign); |
| |
| struct v4l2_discrete_probe { |
| const struct v4l2_frmsize_discrete *sizes; |
| int num_sizes; |
| }; |
| |
| const struct v4l2_frmsize_discrete *v4l2_find_nearest_format( |
| const struct v4l2_discrete_probe *probe, |
| s32 width, s32 height); |
| |
| bool v4l_match_dv_timings(const struct v4l2_dv_timings *t1, |
| const struct v4l2_dv_timings *t2, |
| unsigned pclock_delta); |
| |
| bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, |
| u32 polarities, struct v4l2_dv_timings *fmt); |
| |
| bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, |
| u32 polarities, struct v4l2_fract aspect, |
| struct v4l2_dv_timings *fmt); |
| |
| struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait); |
| |
| void v4l2_get_timestamp(struct timeval *tv); |
| |
| #endif /* V4L2_COMMON_H_ */ |