| /* |
| * Renesas R-Car GPIO Support |
| * |
| * Copyright (C) 2013 Magnus Damm |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/module.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_data/gpio-rcar.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| |
| struct gpio_rcar_priv { |
| void __iomem *base; |
| spinlock_t lock; |
| struct gpio_rcar_config config; |
| struct platform_device *pdev; |
| struct gpio_chip gpio_chip; |
| struct irq_chip irq_chip; |
| struct irq_domain *irq_domain; |
| }; |
| |
| #define IOINTSEL 0x00 |
| #define INOUTSEL 0x04 |
| #define OUTDT 0x08 |
| #define INDT 0x0c |
| #define INTDT 0x10 |
| #define INTCLR 0x14 |
| #define INTMSK 0x18 |
| #define MSKCLR 0x1c |
| #define POSNEG 0x20 |
| #define EDGLEVEL 0x24 |
| #define FILONOFF 0x28 |
| |
| static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) |
| { |
| return ioread32(p->base + offs); |
| } |
| |
| static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, |
| u32 value) |
| { |
| iowrite32(value, p->base + offs); |
| } |
| |
| static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, |
| int bit, bool value) |
| { |
| u32 tmp = gpio_rcar_read(p, offs); |
| |
| if (value) |
| tmp |= BIT(bit); |
| else |
| tmp &= ~BIT(bit); |
| |
| gpio_rcar_write(p, offs, tmp); |
| } |
| |
| static void gpio_rcar_irq_disable(struct irq_data *d) |
| { |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| |
| gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); |
| } |
| |
| static void gpio_rcar_irq_enable(struct irq_data *d) |
| { |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| |
| gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); |
| } |
| |
| static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, |
| unsigned int hwirq, |
| bool active_high_rising_edge, |
| bool level_trigger) |
| { |
| unsigned long flags; |
| |
| /* follow steps in the GPIO documentation for |
| * "Setting Edge-Sensitive Interrupt Input Mode" and |
| * "Setting Level-Sensitive Interrupt Input Mode" |
| */ |
| |
| spin_lock_irqsave(&p->lock, flags); |
| |
| /* Configure postive or negative logic in POSNEG */ |
| gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); |
| |
| /* Configure edge or level trigger in EDGLEVEL */ |
| gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); |
| |
| /* Select "Interrupt Input Mode" in IOINTSEL */ |
| gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); |
| |
| /* Write INTCLR in case of edge trigger */ |
| if (!level_trigger) |
| gpio_rcar_write(p, INTCLR, BIT(hwirq)); |
| |
| spin_unlock_irqrestore(&p->lock, flags); |
| } |
| |
| static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| unsigned int hwirq = irqd_to_hwirq(d); |
| |
| dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); |
| |
| switch (type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_LEVEL_HIGH: |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) |
| { |
| struct gpio_rcar_priv *p = dev_id; |
| u32 pending; |
| unsigned int offset, irqs_handled = 0; |
| |
| while ((pending = gpio_rcar_read(p, INTDT))) { |
| offset = __ffs(pending); |
| gpio_rcar_write(p, INTCLR, BIT(offset)); |
| generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); |
| irqs_handled++; |
| } |
| |
| return irqs_handled ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct gpio_rcar_priv, gpio_chip); |
| } |
| |
| static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, |
| unsigned int gpio, |
| bool output) |
| { |
| struct gpio_rcar_priv *p = gpio_to_priv(chip); |
| unsigned long flags; |
| |
| /* follow steps in the GPIO documentation for |
| * "Setting General Output Mode" and |
| * "Setting General Input Mode" |
| */ |
| |
| spin_lock_irqsave(&p->lock, flags); |
| |
| /* Configure postive logic in POSNEG */ |
| gpio_rcar_modify_bit(p, POSNEG, gpio, false); |
| |
| /* Select "General Input/Output Mode" in IOINTSEL */ |
| gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); |
| |
| /* Select Input Mode or Output Mode in INOUTSEL */ |
| gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); |
| |
| spin_unlock_irqrestore(&p->lock, flags); |
| } |
| |
| static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) |
| { |
| return pinctrl_request_gpio(chip->base + offset); |
| } |
| |
| static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) |
| { |
| pinctrl_free_gpio(chip->base + offset); |
| |
| /* Set the GPIO as an input to ensure that the next GPIO request won't |
| * drive the GPIO pin as an output. |
| */ |
| gpio_rcar_config_general_input_output_mode(chip, offset, false); |
| } |
| |
| static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| gpio_rcar_config_general_input_output_mode(chip, offset, false); |
| return 0; |
| } |
| |
| static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) |
| { |
| return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & BIT(offset)); |
| } |
| |
| static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct gpio_rcar_priv *p = gpio_to_priv(chip); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| gpio_rcar_modify_bit(p, OUTDT, offset, value); |
| spin_unlock_irqrestore(&p->lock, flags); |
| } |
| |
| static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| /* write GPIO value to output before selecting output mode of pin */ |
| gpio_rcar_set(chip, offset, value); |
| gpio_rcar_config_general_input_output_mode(chip, offset, true); |
| return 0; |
| } |
| |
| static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset); |
| } |
| |
| static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct gpio_rcar_priv *p = h->host_data; |
| |
| dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq); |
| |
| irq_set_chip_data(virq, h->host_data); |
| irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); |
| set_irq_flags(virq, IRQF_VALID); /* kill me now */ |
| return 0; |
| } |
| |
| static struct irq_domain_ops gpio_rcar_irq_domain_ops = { |
| .map = gpio_rcar_irq_domain_map, |
| }; |
| |
| static int gpio_rcar_probe(struct platform_device *pdev) |
| { |
| struct gpio_rcar_config *pdata = pdev->dev.platform_data; |
| struct gpio_rcar_priv *p; |
| struct resource *io, *irq; |
| struct gpio_chip *gpio_chip; |
| struct irq_chip *irq_chip; |
| const char *name = dev_name(&pdev->dev); |
| int ret; |
| |
| p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); |
| if (!p) { |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); |
| ret = -ENOMEM; |
| goto err0; |
| } |
| |
| /* deal with driver instance configuration */ |
| if (pdata) |
| p->config = *pdata; |
| |
| p->pdev = pdev; |
| platform_set_drvdata(pdev, p); |
| spin_lock_init(&p->lock); |
| |
| io = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| |
| if (!io || !irq) { |
| dev_err(&pdev->dev, "missing IRQ or IOMEM\n"); |
| ret = -EINVAL; |
| goto err0; |
| } |
| |
| p->base = devm_ioremap_nocache(&pdev->dev, io->start, |
| resource_size(io)); |
| if (!p->base) { |
| dev_err(&pdev->dev, "failed to remap I/O memory\n"); |
| ret = -ENXIO; |
| goto err0; |
| } |
| |
| gpio_chip = &p->gpio_chip; |
| gpio_chip->request = gpio_rcar_request; |
| gpio_chip->free = gpio_rcar_free; |
| gpio_chip->direction_input = gpio_rcar_direction_input; |
| gpio_chip->get = gpio_rcar_get; |
| gpio_chip->direction_output = gpio_rcar_direction_output; |
| gpio_chip->set = gpio_rcar_set; |
| gpio_chip->to_irq = gpio_rcar_to_irq; |
| gpio_chip->label = name; |
| gpio_chip->owner = THIS_MODULE; |
| gpio_chip->base = p->config.gpio_base; |
| gpio_chip->ngpio = p->config.number_of_pins; |
| |
| irq_chip = &p->irq_chip; |
| irq_chip->name = name; |
| irq_chip->irq_mask = gpio_rcar_irq_disable; |
| irq_chip->irq_unmask = gpio_rcar_irq_enable; |
| irq_chip->irq_enable = gpio_rcar_irq_enable; |
| irq_chip->irq_disable = gpio_rcar_irq_disable; |
| irq_chip->irq_set_type = gpio_rcar_irq_set_type; |
| irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED; |
| |
| p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, |
| p->config.number_of_pins, |
| p->config.irq_base, |
| &gpio_rcar_irq_domain_ops, p); |
| if (!p->irq_domain) { |
| ret = -ENXIO; |
| dev_err(&pdev->dev, "cannot initialize irq domain\n"); |
| goto err1; |
| } |
| |
| if (devm_request_irq(&pdev->dev, irq->start, |
| gpio_rcar_irq_handler, 0, name, p)) { |
| dev_err(&pdev->dev, "failed to request IRQ\n"); |
| ret = -ENOENT; |
| goto err1; |
| } |
| |
| ret = gpiochip_add(gpio_chip); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add GPIO controller\n"); |
| goto err1; |
| } |
| |
| dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins); |
| |
| /* warn in case of mismatch if irq base is specified */ |
| if (p->config.irq_base) { |
| ret = irq_find_mapping(p->irq_domain, 0); |
| if (p->config.irq_base != ret) |
| dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n", |
| p->config.irq_base, ret); |
| } |
| |
| ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, |
| gpio_chip->base, gpio_chip->ngpio); |
| if (ret < 0) |
| dev_warn(&pdev->dev, "failed to add pin range\n"); |
| |
| return 0; |
| |
| err1: |
| irq_domain_remove(p->irq_domain); |
| err0: |
| return ret; |
| } |
| |
| static int gpio_rcar_remove(struct platform_device *pdev) |
| { |
| struct gpio_rcar_priv *p = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = gpiochip_remove(&p->gpio_chip); |
| if (ret) |
| return ret; |
| |
| irq_domain_remove(p->irq_domain); |
| return 0; |
| } |
| |
| static struct platform_driver gpio_rcar_device_driver = { |
| .probe = gpio_rcar_probe, |
| .remove = gpio_rcar_remove, |
| .driver = { |
| .name = "gpio_rcar", |
| } |
| }; |
| |
| module_platform_driver(gpio_rcar_device_driver); |
| |
| MODULE_AUTHOR("Magnus Damm"); |
| MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); |
| MODULE_LICENSE("GPL v2"); |