drivers/scsi/NCR5380.h - kernel/msm-5.4 - Gitiles

 /*
  * NCR 5380 defines
  *
  * Copyright 1993, Drew Eckhardt
  *	Visionary Computing
  *	(Unix consulting and custom programming)
  * 	drew@colorado.edu
  *      +1 (303) 666-5836
  *
  * For more information, please consult
  *
  * NCR 5380 Family
  * SCSI Protocol Controller
  * Databook
  * NCR Microelectronics
  * 1635 Aeroplaza Drive
  * Colorado Springs, CO 80916
  * 1+ (719) 578-3400
  * 1+ (800) 334-5454
  */

 #ifndef NCR5380_H
 #define NCR5380_H

 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/workqueue.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_transport_spi.h>

 #define NDEBUG_ARBITRATION	0x1
 #define NDEBUG_AUTOSENSE	0x2
 #define NDEBUG_DMA		0x4
 #define NDEBUG_HANDSHAKE	0x8
 #define NDEBUG_INFORMATION	0x10
 #define NDEBUG_INIT		0x20
 #define NDEBUG_INTR		0x40
 #define NDEBUG_LINKED		0x80
 #define NDEBUG_MAIN		0x100
 #define NDEBUG_NO_DATAOUT	0x200
 #define NDEBUG_NO_WRITE		0x400
 #define NDEBUG_PIO		0x800
 #define NDEBUG_PSEUDO_DMA	0x1000
 #define NDEBUG_QUEUES		0x2000
 #define NDEBUG_RESELECTION	0x4000
 #define NDEBUG_SELECTION	0x8000
 #define NDEBUG_USLEEP		0x10000
 #define NDEBUG_LAST_BYTE_SENT	0x20000
 #define NDEBUG_RESTART_SELECT	0x40000
 #define NDEBUG_EXTENDED		0x80000
 #define NDEBUG_C400_PREAD	0x100000
 #define NDEBUG_C400_PWRITE	0x200000
 #define NDEBUG_LISTS		0x400000
 #define NDEBUG_ABORT		0x800000
 #define NDEBUG_TAGS		0x1000000
 #define NDEBUG_MERGING		0x2000000

 #define NDEBUG_ANY		0xFFFFFFFFUL

 /*
  * The contents of the OUTPUT DATA register are asserted on the bus when
  * either arbitration is occurring or the phase-indicating signals (
  * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
  * bit in the INITIATOR COMMAND register is set.
  */

 #define OUTPUT_DATA_REG         0	/* wo DATA lines on SCSI bus */
 #define CURRENT_SCSI_DATA_REG   0	/* ro same */

 #define INITIATOR_COMMAND_REG	1	/* rw */
 #define ICR_ASSERT_RST		0x80	/* rw Set to assert RST  */
 #define ICR_ARBITRATION_PROGRESS 0x40	/* ro Indicates arbitration complete */
 #define ICR_TRI_STATE		0x40	/* wo Set to tri-state drivers */
 #define ICR_ARBITRATION_LOST	0x20	/* ro Indicates arbitration lost */
 #define ICR_DIFF_ENABLE		0x20	/* wo Set to enable diff. drivers */
 #define ICR_ASSERT_ACK		0x10	/* rw ini Set to assert ACK */
 #define ICR_ASSERT_BSY		0x08	/* rw Set to assert BSY */
 #define ICR_ASSERT_SEL 		0x04	/* rw Set to assert SEL */
 #define ICR_ASSERT_ATN		0x02	/* rw Set to assert ATN */
 #define ICR_ASSERT_DATA		0x01	/* rw SCSI_DATA_REG is asserted */

 #ifdef DIFFERENTIAL
 #define ICR_BASE		ICR_DIFF_ENABLE
 #else
 #define ICR_BASE		0
 #endif

 #define MODE_REG		2
 /*
  * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
  * transfer, causing the chip to hog the bus.  You probably don't want
  * this.
  */
 #define MR_BLOCK_DMA_MODE	0x80	/* rw block mode DMA */
 #define MR_TARGET		0x40	/* rw target mode */
 #define MR_ENABLE_PAR_CHECK	0x20	/* rw enable parity checking */
 #define MR_ENABLE_PAR_INTR	0x10	/* rw enable bad parity interrupt */
 #define MR_ENABLE_EOP_INTR	0x08	/* rw enable eop interrupt */
 #define MR_MONITOR_BSY		0x04	/* rw enable int on unexpected bsy fail */
 #define MR_DMA_MODE		0x02	/* rw DMA / pseudo DMA mode */
 #define MR_ARBITRATE		0x01	/* rw start arbitration */

 #ifdef PARITY
 #define MR_BASE			MR_ENABLE_PAR_CHECK
 #else
 #define MR_BASE			0
 #endif

 #define TARGET_COMMAND_REG	3
 #define TCR_LAST_BYTE_SENT	0x80	/* ro DMA done */
 #define TCR_ASSERT_REQ		0x08	/* tgt rw assert REQ */
 #define TCR_ASSERT_MSG		0x04	/* tgt rw assert MSG */
 #define TCR_ASSERT_CD		0x02	/* tgt rw assert CD */
 #define TCR_ASSERT_IO		0x01	/* tgt rw assert IO */

 #define STATUS_REG		4	/* ro */
 /*
  * Note : a set bit indicates an active signal, driven by us or another
  * device.
  */
 #define SR_RST			0x80
 #define SR_BSY			0x40
 #define SR_REQ			0x20
 #define SR_MSG			0x10
 #define SR_CD			0x08
 #define SR_IO			0x04
 #define SR_SEL			0x02
 #define SR_DBP			0x01

 /*
  * Setting a bit in this register will cause an interrupt to be generated when
  * BSY is false and SEL true and this bit is asserted  on the bus.
  */
 #define SELECT_ENABLE_REG	4	/* wo */

 #define BUS_AND_STATUS_REG	5	/* ro */
 #define BASR_END_DMA_TRANSFER	0x80	/* ro set on end of transfer */
 #define BASR_DRQ		0x40	/* ro mirror of DRQ pin */
 #define BASR_PARITY_ERROR	0x20	/* ro parity error detected */
 #define BASR_IRQ		0x10	/* ro mirror of IRQ pin */
 #define BASR_PHASE_MATCH	0x08	/* ro Set when MSG CD IO match TCR */
 #define BASR_BUSY_ERROR		0x04	/* ro Unexpected change to inactive state */
 #define BASR_ATN 		0x02	/* ro BUS status */
 #define BASR_ACK		0x01	/* ro BUS status */

 /* Write any value to this register to start a DMA send */
 #define START_DMA_SEND_REG	5	/* wo */

 /*
  * Used in DMA transfer mode, data is latched from the SCSI bus on
  * the falling edge of REQ (ini) or ACK (tgt)
  */
 #define INPUT_DATA_REG			6	/* ro */

 /* Write any value to this register to start a DMA receive */
 #define START_DMA_TARGET_RECEIVE_REG	6	/* wo */

 /* Read this register to clear interrupt conditions */
 #define RESET_PARITY_INTERRUPT_REG	7	/* ro */

 /* Write any value to this register to start an ini mode DMA receive */
 #define START_DMA_INITIATOR_RECEIVE_REG 7	/* wo */

 /* NCR 53C400(A) Control Status Register bits: */
 #define CSR_RESET              0x80	/* wo  Resets 53c400 */
 #define CSR_53C80_REG          0x80	/* ro  5380 registers busy */
 #define CSR_TRANS_DIR          0x40	/* rw  Data transfer direction */
 #define CSR_SCSI_BUFF_INTR     0x20	/* rw  Enable int on transfer ready */
 #define CSR_53C80_INTR         0x10	/* rw  Enable 53c80 interrupts */
 #define CSR_SHARED_INTR        0x08	/* rw  Interrupt sharing */
 #define CSR_HOST_BUF_NOT_RDY   0x04	/* ro  Is Host buffer ready */
 #define CSR_SCSI_BUF_RDY       0x02	/* ro  SCSI buffer read */
 #define CSR_GATED_53C80_IRQ    0x01	/* ro  Last block xferred */

 #if 0
 #define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
 #else
 #define CSR_BASE CSR_53C80_INTR
 #endif

 /* Note : PHASE_* macros are based on the values of the STATUS register */
 #define PHASE_MASK 	(SR_MSG | SR_CD | SR_IO)

 #define PHASE_DATAOUT		0
 #define PHASE_DATAIN		SR_IO
 #define PHASE_CMDOUT		SR_CD
 #define PHASE_STATIN		(SR_CD | SR_IO)
 #define PHASE_MSGOUT		(SR_MSG | SR_CD)
 #define PHASE_MSGIN		(SR_MSG | SR_CD | SR_IO)
 #define PHASE_UNKNOWN		0xff

 /*
  * Convert status register phase to something we can use to set phase in
  * the target register so we can get phase mismatch interrupts on DMA
  * transfers.
  */

 #define PHASE_SR_TO_TCR(phase) ((phase) >> 2)

 #ifndef NO_IRQ
 #define NO_IRQ		0
 #endif

 #define FLAG_DMA_FIXUP			1	/* Use DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
 #define FLAG_LATE_DMA_SETUP		32	/* Setup NCR before DMA H/W */
 #define FLAG_TOSHIBA_DELAY		128	/* Allow for borken CD-ROMs */

 struct NCR5380_hostdata {
 	NCR5380_implementation_fields;		/* Board-specific data */
 	u8 __iomem *io;				/* Remapped 5380 address */
 	u8 __iomem *pdma_io;			/* Remapped PDMA address */
 	unsigned long poll_loops;		/* Register polling limit */
 	spinlock_t lock;			/* Protects this struct */
 	struct scsi_cmnd *connected;		/* Currently connected cmnd */
 	struct list_head disconnected;		/* Waiting for reconnect */
 	struct Scsi_Host *host;			/* SCSI host backpointer */
 	struct workqueue_struct *work_q;	/* SCSI host work queue */
 	struct work_struct main_task;		/* Work item for main loop */
 	int flags;				/* Board-specific quirks */
 	int dma_len;				/* Requested length of DMA */
 	int read_overruns;	/* Transfer size reduction for DMA erratum */
 	unsigned long io_port;			/* Device IO port */
 	unsigned long base;			/* Device base address */
 	struct list_head unissued;		/* Waiting to be issued */
 	struct scsi_cmnd *selecting;		/* Cmnd to be connected */
 	struct list_head autosense;		/* Priority cmnd queue */
 	struct scsi_cmnd *sensing;		/* Cmnd needing autosense */
 	struct scsi_eh_save ses;		/* Cmnd state saved for EH */
 	unsigned char busy[8];			/* Index = target, bit = lun */
 	unsigned char id_mask;			/* 1 << Host ID */
 	unsigned char id_higher_mask;		/* All bits above id_mask */
 	unsigned char last_message;		/* Last Message Out */
 	unsigned long region_size;		/* Size of address/port range */
 	char info[256];
 };

 #ifdef __KERNEL__

 struct NCR5380_cmd {
 	struct list_head list;
 };

 #define NCR5380_CMD_SIZE		(sizeof(struct NCR5380_cmd))

 #define NCR5380_PIO_CHUNK_SIZE		256

 /* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */
 #define NCR5380_REG_POLL_TIME		15

 static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
 {
 	return ((struct scsi_cmnd *)ncmd_ptr) - 1;
 }

 #ifndef NDEBUG
 #define NDEBUG (0)
 #endif

 #define dprintk(flg, fmt, ...) \
 	do { if ((NDEBUG) & (flg)) \
 		printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)

 #define dsprintk(flg, host, fmt, ...) \
 	do { if ((NDEBUG) & (flg)) \
 		shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
 	} while (0)

 #if NDEBUG
 #define NCR5380_dprint(flg, arg) \
 	do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
 #define NCR5380_dprint_phase(flg, arg) \
 	do { if ((NDEBUG) & (flg)) NCR5380_print_phase(arg); } while (0)
 static void NCR5380_print_phase(struct Scsi_Host *instance);
 static void NCR5380_print(struct Scsi_Host *instance);
 #else
 #define NCR5380_dprint(flg, arg)       do {} while (0)
 #define NCR5380_dprint_phase(flg, arg) do {} while (0)
 #endif

 static int NCR5380_init(struct Scsi_Host *instance, int flags);
 static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
 static void NCR5380_exit(struct Scsi_Host *instance);
 static void NCR5380_information_transfer(struct Scsi_Host *instance);
 static irqreturn_t NCR5380_intr(int irq, void *dev_id);
 static void NCR5380_main(struct work_struct *work);
 static const char *NCR5380_info(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
 static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 static int NCR5380_poll_politely2(struct NCR5380_hostdata *,
                                   unsigned int, u8, u8,
                                   unsigned int, u8, u8, unsigned long);

 static inline int NCR5380_poll_politely(struct NCR5380_hostdata *hostdata,
                                         unsigned int reg, u8 bit, u8 val,
                                         unsigned long wait)
 {
 	if ((NCR5380_read(reg) & bit) == val)
 		return 0;

 	return NCR5380_poll_politely2(hostdata, reg, bit, val,
 						reg, bit, val, wait);
 }

 static int NCR5380_dma_xfer_len(struct NCR5380_hostdata *,
                                 struct scsi_cmnd *);
 static int NCR5380_dma_send_setup(struct NCR5380_hostdata *,
                                   unsigned char *, int);
 static int NCR5380_dma_recv_setup(struct NCR5380_hostdata *,
                                   unsigned char *, int);
 static int NCR5380_dma_residual(struct NCR5380_hostdata *);

 static inline int NCR5380_dma_xfer_none(struct NCR5380_hostdata *hostdata,
                                         struct scsi_cmnd *cmd)
 {
 	return 0;
 }

 static inline int NCR5380_dma_setup_none(struct NCR5380_hostdata *hostdata,
                                          unsigned char *data, int count)
 {
 	return 0;
 }

 static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata)
 {
 	return 0;
 }

 #endif				/* __KERNEL__ */
 #endif				/* NCR5380_H */
	/*
	* NCR 5380 defines
	*
	* Copyright 1993, Drew Eckhardt
	* Visionary Computing
	* (Unix consulting and custom programming)
	* drew@colorado.edu
	* +1 (303) 666-5836
	*
	* For more information, please consult
	*
	* NCR 5380 Family
	* SCSI Protocol Controller
	* Databook
	* NCR Microelectronics
	* 1635 Aeroplaza Drive
	* Colorado Springs, CO 80916
	* 1+ (719) 578-3400
	* 1+ (800) 334-5454
	*/

	#ifndef NCR5380_H
	#define NCR5380_H

	#include <linux/delay.h>
	#include <linux/interrupt.h>
	#include <linux/list.h>
	#include <linux/workqueue.h>
	#include <scsi/scsi_dbg.h>
	#include <scsi/scsi_eh.h>
	#include <scsi/scsi_transport_spi.h>

	#define NDEBUG_ARBITRATION 0x1
	#define NDEBUG_AUTOSENSE 0x2
	#define NDEBUG_DMA 0x4
	#define NDEBUG_HANDSHAKE 0x8
	#define NDEBUG_INFORMATION 0x10
	#define NDEBUG_INIT 0x20
	#define NDEBUG_INTR 0x40
	#define NDEBUG_LINKED 0x80
	#define NDEBUG_MAIN 0x100
	#define NDEBUG_NO_DATAOUT 0x200
	#define NDEBUG_NO_WRITE 0x400
	#define NDEBUG_PIO 0x800
	#define NDEBUG_PSEUDO_DMA 0x1000
	#define NDEBUG_QUEUES 0x2000
	#define NDEBUG_RESELECTION 0x4000
	#define NDEBUG_SELECTION 0x8000
	#define NDEBUG_USLEEP 0x10000
	#define NDEBUG_LAST_BYTE_SENT 0x20000
	#define NDEBUG_RESTART_SELECT 0x40000
	#define NDEBUG_EXTENDED 0x80000
	#define NDEBUG_C400_PREAD 0x100000
	#define NDEBUG_C400_PWRITE 0x200000
	#define NDEBUG_LISTS 0x400000
	#define NDEBUG_ABORT 0x800000
	#define NDEBUG_TAGS 0x1000000
	#define NDEBUG_MERGING 0x2000000

	#define NDEBUG_ANY 0xFFFFFFFFUL

	/*
	* The contents of the OUTPUT DATA register are asserted on the bus when
	* either arbitration is occurring or the phase-indicating signals (
	* IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
	* bit in the INITIATOR COMMAND register is set.
	*/

	#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
	#define CURRENT_SCSI_DATA_REG 0 /* ro same */

	#define INITIATOR_COMMAND_REG 1 /* rw */
	#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
	#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
	#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
	#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
	#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
	#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
	#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
	#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
	#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
	#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */

	#ifdef DIFFERENTIAL
	#define ICR_BASE ICR_DIFF_ENABLE
	#else
	#define ICR_BASE 0
	#endif

	#define MODE_REG 2
	/*
	* Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
	* transfer, causing the chip to hog the bus. You probably don't want
	* this.
	*/
	#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
	#define MR_TARGET 0x40 /* rw target mode */
	#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
	#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
	#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
	#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
	#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
	#define MR_ARBITRATE 0x01 /* rw start arbitration */

	#ifdef PARITY
	#define MR_BASE MR_ENABLE_PAR_CHECK
	#else
	#define MR_BASE 0
	#endif

	#define TARGET_COMMAND_REG 3
	#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
	#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
	#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
	#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
	#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */

	#define STATUS_REG 4 /* ro */
	/*
	* Note : a set bit indicates an active signal, driven by us or another
	* device.
	*/
	#define SR_RST 0x80
	#define SR_BSY 0x40
	#define SR_REQ 0x20
	#define SR_MSG 0x10
	#define SR_CD 0x08
	#define SR_IO 0x04
	#define SR_SEL 0x02
	#define SR_DBP 0x01

	/*
	* Setting a bit in this register will cause an interrupt to be generated when
	* BSY is false and SEL true and this bit is asserted on the bus.
	*/
	#define SELECT_ENABLE_REG 4 /* wo */

	#define BUS_AND_STATUS_REG 5 /* ro */
	#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
	#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
	#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
	#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
	#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
	#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
	#define BASR_ATN 0x02 /* ro BUS status */
	#define BASR_ACK 0x01 /* ro BUS status */

	/* Write any value to this register to start a DMA send */
	#define START_DMA_SEND_REG 5 /* wo */

	/*
	* Used in DMA transfer mode, data is latched from the SCSI bus on
	* the falling edge of REQ (ini) or ACK (tgt)
	*/
	#define INPUT_DATA_REG 6 /* ro */

	/* Write any value to this register to start a DMA receive */
	#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */

	/* Read this register to clear interrupt conditions */
	#define RESET_PARITY_INTERRUPT_REG 7 /* ro */

	/* Write any value to this register to start an ini mode DMA receive */
	#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */

	/* NCR 53C400(A) Control Status Register bits: */
	#define CSR_RESET 0x80 /* wo Resets 53c400 */
	#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
	#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
	#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
	#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
	#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
	#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
	#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
	#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */

	#if 0
	#define CSR_BASE CSR_SCSI_BUFF_INTR \| CSR_53C80_INTR
	#else
	#define CSR_BASE CSR_53C80_INTR
	#endif

	/* Note : PHASE_* macros are based on the values of the STATUS register */
	#define PHASE_MASK (SR_MSG \| SR_CD \| SR_IO)

	#define PHASE_DATAOUT 0
	#define PHASE_DATAIN SR_IO
	#define PHASE_CMDOUT SR_CD
	#define PHASE_STATIN (SR_CD \| SR_IO)
	#define PHASE_MSGOUT (SR_MSG \| SR_CD)
	#define PHASE_MSGIN (SR_MSG \| SR_CD \| SR_IO)
	#define PHASE_UNKNOWN 0xff

	/*
	* Convert status register phase to something we can use to set phase in
	* the target register so we can get phase mismatch interrupts on DMA
	* transfers.
	*/

	#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)

	#ifndef NO_IRQ
	#define NO_IRQ 0
	#endif

	#define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */
	#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
	#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
	#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */

	struct NCR5380_hostdata {
	NCR5380_implementation_fields; /* Board-specific data */
	u8 __iomem io; / Remapped 5380 address */
	u8 __iomem pdma_io; / Remapped PDMA address */
	unsigned long poll_loops; /* Register polling limit */
	spinlock_t lock; /* Protects this struct */
	struct scsi_cmnd connected; / Currently connected cmnd */
	struct list_head disconnected; /* Waiting for reconnect */
	struct Scsi_Host host; / SCSI host backpointer */
	struct workqueue_struct work_q; / SCSI host work queue */
	struct work_struct main_task; /* Work item for main loop */
	int flags; /* Board-specific quirks */
	int dma_len; /* Requested length of DMA */
	int read_overruns; /* Transfer size reduction for DMA erratum */
	unsigned long io_port; /* Device IO port */
	unsigned long base; /* Device base address */
	struct list_head unissued; /* Waiting to be issued */
	struct scsi_cmnd selecting; / Cmnd to be connected */
	struct list_head autosense; /* Priority cmnd queue */
	struct scsi_cmnd sensing; / Cmnd needing autosense */
	struct scsi_eh_save ses; /* Cmnd state saved for EH */
	unsigned char busy[8]; /* Index = target, bit = lun */
	unsigned char id_mask; /* 1 << Host ID */
	unsigned char id_higher_mask; /* All bits above id_mask */
	unsigned char last_message; /* Last Message Out */
	unsigned long region_size; /* Size of address/port range */
	char info[256];
	};

	#ifdef __KERNEL__

	struct NCR5380_cmd {
	struct list_head list;
	};

	#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))

	#define NCR5380_PIO_CHUNK_SIZE 256

	/* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */
	#define NCR5380_REG_POLL_TIME 15

	static inline struct scsi_cmnd NCR5380_to_scmd(struct NCR5380_cmd ncmd_ptr)
	{
	return ((struct scsi_cmnd *)ncmd_ptr) - 1;
	}

	#ifndef NDEBUG
	#define NDEBUG (0)
	#endif

	#define dprintk(flg, fmt, ...) \
	do { if ((NDEBUG) & (flg)) \
	printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)

	#define dsprintk(flg, host, fmt, ...) \
	do { if ((NDEBUG) & (flg)) \
	shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
	} while (0)

	#if NDEBUG
	#define NCR5380_dprint(flg, arg) \
	do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
	#define NCR5380_dprint_phase(flg, arg) \
	do { if ((NDEBUG) & (flg)) NCR5380_print_phase(arg); } while (0)
	static void NCR5380_print_phase(struct Scsi_Host *instance);
	static void NCR5380_print(struct Scsi_Host *instance);
	#else
	#define NCR5380_dprint(flg, arg) do {} while (0)
	#define NCR5380_dprint_phase(flg, arg) do {} while (0)
	#endif

	static int NCR5380_init(struct Scsi_Host *instance, int flags);
	static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
	static void NCR5380_exit(struct Scsi_Host *instance);
	static void NCR5380_information_transfer(struct Scsi_Host *instance);
	static irqreturn_t NCR5380_intr(int irq, void *dev_id);
	static void NCR5380_main(struct work_struct *work);
	static const char NCR5380_info(struct Scsi_Host instance);
	static void NCR5380_reselect(struct Scsi_Host *instance);
	static struct scsi_cmnd NCR5380_select(struct Scsi_Host , struct scsi_cmnd *);
	static int NCR5380_transfer_dma(struct Scsi_Host instance, unsigned char phase, int count, unsigned char *data);
	static int NCR5380_transfer_pio(struct Scsi_Host instance, unsigned char phase, int count, unsigned char *data);
	static int NCR5380_poll_politely2(struct NCR5380_hostdata *,
	unsigned int, u8, u8,
	unsigned int, u8, u8, unsigned long);

	static inline int NCR5380_poll_politely(struct NCR5380_hostdata *hostdata,
	unsigned int reg, u8 bit, u8 val,
	unsigned long wait)
	{
	if ((NCR5380_read(reg) & bit) == val)
	return 0;

	return NCR5380_poll_politely2(hostdata, reg, bit, val,
	reg, bit, val, wait);
	}

	static int NCR5380_dma_xfer_len(struct NCR5380_hostdata *,
	struct scsi_cmnd *);
	static int NCR5380_dma_send_setup(struct NCR5380_hostdata *,
	unsigned char *, int);
	static int NCR5380_dma_recv_setup(struct NCR5380_hostdata *,
	unsigned char *, int);
	static int NCR5380_dma_residual(struct NCR5380_hostdata *);

	static inline int NCR5380_dma_xfer_none(struct NCR5380_hostdata *hostdata,
	struct scsi_cmnd *cmd)
	{
	return 0;
	}

	static inline int NCR5380_dma_setup_none(struct NCR5380_hostdata *hostdata,
	unsigned char *data, int count)
	{
	return 0;
	}

	static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata)
	{
	return 0;
	}

	#endif /* __KERNEL__ */
	#endif /* NCR5380_H */