| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Quick'n'dirty IP checksum ... |
| * |
| * Copyright (C) 1998, 1999 Ralf Baechle |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * Copyright (C) 2007 Maciej W. Rozycki |
| * Copyright (C) 2014 Imagination Technologies Ltd. |
| */ |
| #include <linux/errno.h> |
| #include <asm/asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/regdef.h> |
| |
| #ifdef CONFIG_64BIT |
| /* |
| * As we are sharing code base with the mips32 tree (which use the o32 ABI |
| * register definitions). We need to redefine the register definitions from |
| * the n64 ABI register naming to the o32 ABI register naming. |
| */ |
| #undef t0 |
| #undef t1 |
| #undef t2 |
| #undef t3 |
| #define t0 $8 |
| #define t1 $9 |
| #define t2 $10 |
| #define t3 $11 |
| #define t4 $12 |
| #define t5 $13 |
| #define t6 $14 |
| #define t7 $15 |
| |
| #define USE_DOUBLE |
| #endif |
| |
| #ifdef USE_DOUBLE |
| |
| #define LOAD ld |
| #define LOAD32 lwu |
| #define ADD daddu |
| #define NBYTES 8 |
| |
| #else |
| |
| #define LOAD lw |
| #define LOAD32 lw |
| #define ADD addu |
| #define NBYTES 4 |
| |
| #endif /* USE_DOUBLE */ |
| |
| #define UNIT(unit) ((unit)*NBYTES) |
| |
| #define ADDC(sum,reg) \ |
| .set push; \ |
| .set noat; \ |
| ADD sum, reg; \ |
| sltu v1, sum, reg; \ |
| ADD sum, v1; \ |
| .set pop |
| |
| #define ADDC32(sum,reg) \ |
| .set push; \ |
| .set noat; \ |
| addu sum, reg; \ |
| sltu v1, sum, reg; \ |
| addu sum, v1; \ |
| .set pop |
| |
| #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ |
| LOAD _t0, (offset + UNIT(0))(src); \ |
| LOAD _t1, (offset + UNIT(1))(src); \ |
| LOAD _t2, (offset + UNIT(2))(src); \ |
| LOAD _t3, (offset + UNIT(3))(src); \ |
| ADDC(sum, _t0); \ |
| ADDC(sum, _t1); \ |
| ADDC(sum, _t2); \ |
| ADDC(sum, _t3) |
| |
| #ifdef USE_DOUBLE |
| #define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \ |
| CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) |
| #else |
| #define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \ |
| CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3); \ |
| CSUM_BIGCHUNK1(src, offset + 0x10, sum, _t0, _t1, _t2, _t3) |
| #endif |
| |
| /* |
| * a0: source address |
| * a1: length of the area to checksum |
| * a2: partial checksum |
| */ |
| |
| #define src a0 |
| #define sum v0 |
| |
| .text |
| .set noreorder |
| .align 5 |
| LEAF(csum_partial) |
| move sum, zero |
| move t7, zero |
| |
| sltiu t8, a1, 0x8 |
| bnez t8, .Lsmall_csumcpy /* < 8 bytes to copy */ |
| move t2, a1 |
| |
| andi t7, src, 0x1 /* odd buffer? */ |
| |
| .Lhword_align: |
| beqz t7, .Lword_align |
| andi t8, src, 0x2 |
| |
| lbu t0, (src) |
| LONG_SUBU a1, a1, 0x1 |
| #ifdef __MIPSEL__ |
| sll t0, t0, 8 |
| #endif |
| ADDC(sum, t0) |
| PTR_ADDU src, src, 0x1 |
| andi t8, src, 0x2 |
| |
| .Lword_align: |
| beqz t8, .Ldword_align |
| sltiu t8, a1, 56 |
| |
| lhu t0, (src) |
| LONG_SUBU a1, a1, 0x2 |
| ADDC(sum, t0) |
| sltiu t8, a1, 56 |
| PTR_ADDU src, src, 0x2 |
| |
| .Ldword_align: |
| bnez t8, .Ldo_end_words |
| move t8, a1 |
| |
| andi t8, src, 0x4 |
| beqz t8, .Lqword_align |
| andi t8, src, 0x8 |
| |
| LOAD32 t0, 0x00(src) |
| LONG_SUBU a1, a1, 0x4 |
| ADDC(sum, t0) |
| PTR_ADDU src, src, 0x4 |
| andi t8, src, 0x8 |
| |
| .Lqword_align: |
| beqz t8, .Loword_align |
| andi t8, src, 0x10 |
| |
| #ifdef USE_DOUBLE |
| ld t0, 0x00(src) |
| LONG_SUBU a1, a1, 0x8 |
| ADDC(sum, t0) |
| #else |
| lw t0, 0x00(src) |
| lw t1, 0x04(src) |
| LONG_SUBU a1, a1, 0x8 |
| ADDC(sum, t0) |
| ADDC(sum, t1) |
| #endif |
| PTR_ADDU src, src, 0x8 |
| andi t8, src, 0x10 |
| |
| .Loword_align: |
| beqz t8, .Lbegin_movement |
| LONG_SRL t8, a1, 0x7 |
| |
| #ifdef USE_DOUBLE |
| ld t0, 0x00(src) |
| ld t1, 0x08(src) |
| ADDC(sum, t0) |
| ADDC(sum, t1) |
| #else |
| CSUM_BIGCHUNK1(src, 0x00, sum, t0, t1, t3, t4) |
| #endif |
| LONG_SUBU a1, a1, 0x10 |
| PTR_ADDU src, src, 0x10 |
| LONG_SRL t8, a1, 0x7 |
| |
| .Lbegin_movement: |
| beqz t8, 1f |
| andi t2, a1, 0x40 |
| |
| .Lmove_128bytes: |
| CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) |
| CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4) |
| CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4) |
| CSUM_BIGCHUNK(src, 0x60, sum, t0, t1, t3, t4) |
| LONG_SUBU t8, t8, 0x01 |
| .set reorder /* DADDI_WAR */ |
| PTR_ADDU src, src, 0x80 |
| bnez t8, .Lmove_128bytes |
| .set noreorder |
| |
| 1: |
| beqz t2, 1f |
| andi t2, a1, 0x20 |
| |
| .Lmove_64bytes: |
| CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) |
| CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4) |
| PTR_ADDU src, src, 0x40 |
| |
| 1: |
| beqz t2, .Ldo_end_words |
| andi t8, a1, 0x1c |
| |
| .Lmove_32bytes: |
| CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) |
| andi t8, a1, 0x1c |
| PTR_ADDU src, src, 0x20 |
| |
| .Ldo_end_words: |
| beqz t8, .Lsmall_csumcpy |
| andi t2, a1, 0x3 |
| LONG_SRL t8, t8, 0x2 |
| |
| .Lend_words: |
| LOAD32 t0, (src) |
| LONG_SUBU t8, t8, 0x1 |
| ADDC(sum, t0) |
| .set reorder /* DADDI_WAR */ |
| PTR_ADDU src, src, 0x4 |
| bnez t8, .Lend_words |
| .set noreorder |
| |
| /* unknown src alignment and < 8 bytes to go */ |
| .Lsmall_csumcpy: |
| move a1, t2 |
| |
| andi t0, a1, 4 |
| beqz t0, 1f |
| andi t0, a1, 2 |
| |
| /* Still a full word to go */ |
| ulw t1, (src) |
| PTR_ADDIU src, 4 |
| #ifdef USE_DOUBLE |
| dsll t1, t1, 32 /* clear lower 32bit */ |
| #endif |
| ADDC(sum, t1) |
| |
| 1: move t1, zero |
| beqz t0, 1f |
| andi t0, a1, 1 |
| |
| /* Still a halfword to go */ |
| ulhu t1, (src) |
| PTR_ADDIU src, 2 |
| |
| 1: beqz t0, 1f |
| sll t1, t1, 16 |
| |
| lbu t2, (src) |
| nop |
| |
| #ifdef __MIPSEB__ |
| sll t2, t2, 8 |
| #endif |
| or t1, t2 |
| |
| 1: ADDC(sum, t1) |
| |
| /* fold checksum */ |
| #ifdef USE_DOUBLE |
| dsll32 v1, sum, 0 |
| daddu sum, v1 |
| sltu v1, sum, v1 |
| dsra32 sum, sum, 0 |
| addu sum, v1 |
| #endif |
| |
| /* odd buffer alignment? */ |
| #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) |
| .set push |
| .set arch=mips32r2 |
| wsbh v1, sum |
| movn sum, v1, t7 |
| .set pop |
| #else |
| beqz t7, 1f /* odd buffer alignment? */ |
| lui v1, 0x00ff |
| addu v1, 0x00ff |
| and t0, sum, v1 |
| sll t0, t0, 8 |
| srl sum, sum, 8 |
| and sum, sum, v1 |
| or sum, sum, t0 |
| 1: |
| #endif |
| .set reorder |
| /* Add the passed partial csum. */ |
| ADDC32(sum, a2) |
| jr ra |
| .set noreorder |
| END(csum_partial) |
| |
| |
| /* |
| * checksum and copy routines based on memcpy.S |
| * |
| * csum_partial_copy_nocheck(src, dst, len, sum) |
| * __csum_partial_copy_kernel(src, dst, len, sum, errp) |
| * |
| * See "Spec" in memcpy.S for details. Unlike __copy_user, all |
| * function in this file use the standard calling convention. |
| */ |
| |
| #define src a0 |
| #define dst a1 |
| #define len a2 |
| #define psum a3 |
| #define sum v0 |
| #define odd t8 |
| #define errptr t9 |
| |
| /* |
| * The exception handler for loads requires that: |
| * 1- AT contain the address of the byte just past the end of the source |
| * of the copy, |
| * 2- src_entry <= src < AT, and |
| * 3- (dst - src) == (dst_entry - src_entry), |
| * The _entry suffix denotes values when __copy_user was called. |
| * |
| * (1) is set up up by __csum_partial_copy_from_user and maintained by |
| * not writing AT in __csum_partial_copy |
| * (2) is met by incrementing src by the number of bytes copied |
| * (3) is met by not doing loads between a pair of increments of dst and src |
| * |
| * The exception handlers for stores stores -EFAULT to errptr and return. |
| * These handlers do not need to overwrite any data. |
| */ |
| |
| /* Instruction type */ |
| #define LD_INSN 1 |
| #define ST_INSN 2 |
| #define LEGACY_MODE 1 |
| #define EVA_MODE 2 |
| #define USEROP 1 |
| #define KERNELOP 2 |
| |
| /* |
| * Wrapper to add an entry in the exception table |
| * in case the insn causes a memory exception. |
| * Arguments: |
| * insn : Load/store instruction |
| * type : Instruction type |
| * reg : Register |
| * addr : Address |
| * handler : Exception handler |
| */ |
| #define EXC(insn, type, reg, addr, handler) \ |
| .if \mode == LEGACY_MODE; \ |
| 9: insn reg, addr; \ |
| .section __ex_table,"a"; \ |
| PTR 9b, handler; \ |
| .previous; \ |
| /* This is enabled in EVA mode */ \ |
| .else; \ |
| /* If loading from user or storing to user */ \ |
| .if ((\from == USEROP) && (type == LD_INSN)) || \ |
| ((\to == USEROP) && (type == ST_INSN)); \ |
| 9: __BUILD_EVA_INSN(insn##e, reg, addr); \ |
| .section __ex_table,"a"; \ |
| PTR 9b, handler; \ |
| .previous; \ |
| .else; \ |
| /* EVA without exception */ \ |
| insn reg, addr; \ |
| .endif; \ |
| .endif |
| |
| #undef LOAD |
| |
| #ifdef USE_DOUBLE |
| |
| #define LOADK ld /* No exception */ |
| #define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler) |
| #define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) |
| #define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler) |
| #define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler) |
| #define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) |
| #define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler) |
| #define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler) |
| #define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler) |
| #define ADD daddu |
| #define SUB dsubu |
| #define SRL dsrl |
| #define SLL dsll |
| #define SLLV dsllv |
| #define SRLV dsrlv |
| #define NBYTES 8 |
| #define LOG_NBYTES 3 |
| |
| #else |
| |
| #define LOADK lw /* No exception */ |
| #define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler) |
| #define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) |
| #define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler) |
| #define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler) |
| #define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) |
| #define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler) |
| #define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler) |
| #define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler) |
| #define ADD addu |
| #define SUB subu |
| #define SRL srl |
| #define SLL sll |
| #define SLLV sllv |
| #define SRLV srlv |
| #define NBYTES 4 |
| #define LOG_NBYTES 2 |
| |
| #endif /* USE_DOUBLE */ |
| |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN |
| #define LDFIRST LOADR |
| #define LDREST LOADL |
| #define STFIRST STORER |
| #define STREST STOREL |
| #define SHIFT_DISCARD SLLV |
| #define SHIFT_DISCARD_REVERT SRLV |
| #else |
| #define LDFIRST LOADL |
| #define LDREST LOADR |
| #define STFIRST STOREL |
| #define STREST STORER |
| #define SHIFT_DISCARD SRLV |
| #define SHIFT_DISCARD_REVERT SLLV |
| #endif |
| |
| #define FIRST(unit) ((unit)*NBYTES) |
| #define REST(unit) (FIRST(unit)+NBYTES-1) |
| |
| #define ADDRMASK (NBYTES-1) |
| |
| #ifndef CONFIG_CPU_DADDI_WORKAROUNDS |
| .set noat |
| #else |
| .set at=v1 |
| #endif |
| |
| .macro __BUILD_CSUM_PARTIAL_COPY_USER mode, from, to, __nocheck |
| |
| PTR_ADDU AT, src, len /* See (1) above. */ |
| /* initialize __nocheck if this the first time we execute this |
| * macro |
| */ |
| #ifdef CONFIG_64BIT |
| move errptr, a4 |
| #else |
| lw errptr, 16(sp) |
| #endif |
| .if \__nocheck == 1 |
| FEXPORT(csum_partial_copy_nocheck) |
| .endif |
| move sum, zero |
| move odd, zero |
| /* |
| * Note: dst & src may be unaligned, len may be 0 |
| * Temps |
| */ |
| /* |
| * The "issue break"s below are very approximate. |
| * Issue delays for dcache fills will perturb the schedule, as will |
| * load queue full replay traps, etc. |
| * |
| * If len < NBYTES use byte operations. |
| */ |
| sltu t2, len, NBYTES |
| and t1, dst, ADDRMASK |
| bnez t2, .Lcopy_bytes_checklen\@ |
| and t0, src, ADDRMASK |
| andi odd, dst, 0x1 /* odd buffer? */ |
| bnez t1, .Ldst_unaligned\@ |
| nop |
| bnez t0, .Lsrc_unaligned_dst_aligned\@ |
| /* |
| * use delay slot for fall-through |
| * src and dst are aligned; need to compute rem |
| */ |
| .Lboth_aligned\@: |
| SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter |
| beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES |
| nop |
| SUB len, 8*NBYTES # subtract here for bgez loop |
| .align 4 |
| 1: |
| LOAD(t0, UNIT(0)(src), .Ll_exc\@) |
| LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) |
| LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) |
| LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) |
| LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@) |
| LOAD(t5, UNIT(5)(src), .Ll_exc_copy\@) |
| LOAD(t6, UNIT(6)(src), .Ll_exc_copy\@) |
| LOAD(t7, UNIT(7)(src), .Ll_exc_copy\@) |
| SUB len, len, 8*NBYTES |
| ADD src, src, 8*NBYTES |
| STORE(t0, UNIT(0)(dst), .Ls_exc\@) |
| ADDC(sum, t0) |
| STORE(t1, UNIT(1)(dst), .Ls_exc\@) |
| ADDC(sum, t1) |
| STORE(t2, UNIT(2)(dst), .Ls_exc\@) |
| ADDC(sum, t2) |
| STORE(t3, UNIT(3)(dst), .Ls_exc\@) |
| ADDC(sum, t3) |
| STORE(t4, UNIT(4)(dst), .Ls_exc\@) |
| ADDC(sum, t4) |
| STORE(t5, UNIT(5)(dst), .Ls_exc\@) |
| ADDC(sum, t5) |
| STORE(t6, UNIT(6)(dst), .Ls_exc\@) |
| ADDC(sum, t6) |
| STORE(t7, UNIT(7)(dst), .Ls_exc\@) |
| ADDC(sum, t7) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, 8*NBYTES |
| bgez len, 1b |
| .set noreorder |
| ADD len, 8*NBYTES # revert len (see above) |
| |
| /* |
| * len == the number of bytes left to copy < 8*NBYTES |
| */ |
| .Lcleanup_both_aligned\@: |
| #define rem t7 |
| beqz len, .Ldone\@ |
| sltu t0, len, 4*NBYTES |
| bnez t0, .Lless_than_4units\@ |
| and rem, len, (NBYTES-1) # rem = len % NBYTES |
| /* |
| * len >= 4*NBYTES |
| */ |
| LOAD(t0, UNIT(0)(src), .Ll_exc\@) |
| LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) |
| LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) |
| LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) |
| SUB len, len, 4*NBYTES |
| ADD src, src, 4*NBYTES |
| STORE(t0, UNIT(0)(dst), .Ls_exc\@) |
| ADDC(sum, t0) |
| STORE(t1, UNIT(1)(dst), .Ls_exc\@) |
| ADDC(sum, t1) |
| STORE(t2, UNIT(2)(dst), .Ls_exc\@) |
| ADDC(sum, t2) |
| STORE(t3, UNIT(3)(dst), .Ls_exc\@) |
| ADDC(sum, t3) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, 4*NBYTES |
| beqz len, .Ldone\@ |
| .set noreorder |
| .Lless_than_4units\@: |
| /* |
| * rem = len % NBYTES |
| */ |
| beq rem, len, .Lcopy_bytes\@ |
| nop |
| 1: |
| LOAD(t0, 0(src), .Ll_exc\@) |
| ADD src, src, NBYTES |
| SUB len, len, NBYTES |
| STORE(t0, 0(dst), .Ls_exc\@) |
| ADDC(sum, t0) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, NBYTES |
| bne rem, len, 1b |
| .set noreorder |
| |
| /* |
| * src and dst are aligned, need to copy rem bytes (rem < NBYTES) |
| * A loop would do only a byte at a time with possible branch |
| * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE |
| * because can't assume read-access to dst. Instead, use |
| * STREST dst, which doesn't require read access to dst. |
| * |
| * This code should perform better than a simple loop on modern, |
| * wide-issue mips processors because the code has fewer branches and |
| * more instruction-level parallelism. |
| */ |
| #define bits t2 |
| beqz len, .Ldone\@ |
| ADD t1, dst, len # t1 is just past last byte of dst |
| li bits, 8*NBYTES |
| SLL rem, len, 3 # rem = number of bits to keep |
| LOAD(t0, 0(src), .Ll_exc\@) |
| SUB bits, bits, rem # bits = number of bits to discard |
| SHIFT_DISCARD t0, t0, bits |
| STREST(t0, -1(t1), .Ls_exc\@) |
| SHIFT_DISCARD_REVERT t0, t0, bits |
| .set reorder |
| ADDC(sum, t0) |
| b .Ldone\@ |
| .set noreorder |
| .Ldst_unaligned\@: |
| /* |
| * dst is unaligned |
| * t0 = src & ADDRMASK |
| * t1 = dst & ADDRMASK; T1 > 0 |
| * len >= NBYTES |
| * |
| * Copy enough bytes to align dst |
| * Set match = (src and dst have same alignment) |
| */ |
| #define match rem |
| LDFIRST(t3, FIRST(0)(src), .Ll_exc\@) |
| ADD t2, zero, NBYTES |
| LDREST(t3, REST(0)(src), .Ll_exc_copy\@) |
| SUB t2, t2, t1 # t2 = number of bytes copied |
| xor match, t0, t1 |
| STFIRST(t3, FIRST(0)(dst), .Ls_exc\@) |
| SLL t4, t1, 3 # t4 = number of bits to discard |
| SHIFT_DISCARD t3, t3, t4 |
| /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */ |
| ADDC(sum, t3) |
| beq len, t2, .Ldone\@ |
| SUB len, len, t2 |
| ADD dst, dst, t2 |
| beqz match, .Lboth_aligned\@ |
| ADD src, src, t2 |
| |
| .Lsrc_unaligned_dst_aligned\@: |
| SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter |
| beqz t0, .Lcleanup_src_unaligned\@ |
| and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES |
| 1: |
| /* |
| * Avoid consecutive LD*'s to the same register since some mips |
| * implementations can't issue them in the same cycle. |
| * It's OK to load FIRST(N+1) before REST(N) because the two addresses |
| * are to the same unit (unless src is aligned, but it's not). |
| */ |
| LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) |
| LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@) |
| SUB len, len, 4*NBYTES |
| LDREST(t0, REST(0)(src), .Ll_exc_copy\@) |
| LDREST(t1, REST(1)(src), .Ll_exc_copy\@) |
| LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@) |
| LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@) |
| LDREST(t2, REST(2)(src), .Ll_exc_copy\@) |
| LDREST(t3, REST(3)(src), .Ll_exc_copy\@) |
| ADD src, src, 4*NBYTES |
| #ifdef CONFIG_CPU_SB1 |
| nop # improves slotting |
| #endif |
| STORE(t0, UNIT(0)(dst), .Ls_exc\@) |
| ADDC(sum, t0) |
| STORE(t1, UNIT(1)(dst), .Ls_exc\@) |
| ADDC(sum, t1) |
| STORE(t2, UNIT(2)(dst), .Ls_exc\@) |
| ADDC(sum, t2) |
| STORE(t3, UNIT(3)(dst), .Ls_exc\@) |
| ADDC(sum, t3) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, 4*NBYTES |
| bne len, rem, 1b |
| .set noreorder |
| |
| .Lcleanup_src_unaligned\@: |
| beqz len, .Ldone\@ |
| and rem, len, NBYTES-1 # rem = len % NBYTES |
| beq rem, len, .Lcopy_bytes\@ |
| nop |
| 1: |
| LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) |
| LDREST(t0, REST(0)(src), .Ll_exc_copy\@) |
| ADD src, src, NBYTES |
| SUB len, len, NBYTES |
| STORE(t0, 0(dst), .Ls_exc\@) |
| ADDC(sum, t0) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, NBYTES |
| bne len, rem, 1b |
| .set noreorder |
| |
| .Lcopy_bytes_checklen\@: |
| beqz len, .Ldone\@ |
| nop |
| .Lcopy_bytes\@: |
| /* 0 < len < NBYTES */ |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN |
| #define SHIFT_START 0 |
| #define SHIFT_INC 8 |
| #else |
| #define SHIFT_START 8*(NBYTES-1) |
| #define SHIFT_INC -8 |
| #endif |
| move t2, zero # partial word |
| li t3, SHIFT_START # shift |
| /* use .Ll_exc_copy here to return correct sum on fault */ |
| #define COPY_BYTE(N) \ |
| LOADBU(t0, N(src), .Ll_exc_copy\@); \ |
| SUB len, len, 1; \ |
| STOREB(t0, N(dst), .Ls_exc\@); \ |
| SLLV t0, t0, t3; \ |
| addu t3, SHIFT_INC; \ |
| beqz len, .Lcopy_bytes_done\@; \ |
| or t2, t0 |
| |
| COPY_BYTE(0) |
| COPY_BYTE(1) |
| #ifdef USE_DOUBLE |
| COPY_BYTE(2) |
| COPY_BYTE(3) |
| COPY_BYTE(4) |
| COPY_BYTE(5) |
| #endif |
| LOADBU(t0, NBYTES-2(src), .Ll_exc_copy\@) |
| SUB len, len, 1 |
| STOREB(t0, NBYTES-2(dst), .Ls_exc\@) |
| SLLV t0, t0, t3 |
| or t2, t0 |
| .Lcopy_bytes_done\@: |
| ADDC(sum, t2) |
| .Ldone\@: |
| /* fold checksum */ |
| .set push |
| .set noat |
| #ifdef USE_DOUBLE |
| dsll32 v1, sum, 0 |
| daddu sum, v1 |
| sltu v1, sum, v1 |
| dsra32 sum, sum, 0 |
| addu sum, v1 |
| #endif |
| |
| #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) |
| .set push |
| .set arch=mips32r2 |
| wsbh v1, sum |
| movn sum, v1, odd |
| .set pop |
| #else |
| beqz odd, 1f /* odd buffer alignment? */ |
| lui v1, 0x00ff |
| addu v1, 0x00ff |
| and t0, sum, v1 |
| sll t0, t0, 8 |
| srl sum, sum, 8 |
| and sum, sum, v1 |
| or sum, sum, t0 |
| 1: |
| #endif |
| .set pop |
| .set reorder |
| ADDC32(sum, psum) |
| jr ra |
| .set noreorder |
| |
| .Ll_exc_copy\@: |
| /* |
| * Copy bytes from src until faulting load address (or until a |
| * lb faults) |
| * |
| * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28) |
| * may be more than a byte beyond the last address. |
| * Hence, the lb below may get an exception. |
| * |
| * Assumes src < THREAD_BUADDR($28) |
| */ |
| LOADK t0, TI_TASK($28) |
| li t2, SHIFT_START |
| LOADK t0, THREAD_BUADDR(t0) |
| 1: |
| LOADBU(t1, 0(src), .Ll_exc\@) |
| ADD src, src, 1 |
| sb t1, 0(dst) # can't fault -- we're copy_from_user |
| SLLV t1, t1, t2 |
| addu t2, SHIFT_INC |
| ADDC(sum, t1) |
| .set reorder /* DADDI_WAR */ |
| ADD dst, dst, 1 |
| bne src, t0, 1b |
| .set noreorder |
| .Ll_exc\@: |
| LOADK t0, TI_TASK($28) |
| nop |
| LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address |
| nop |
| SUB len, AT, t0 # len number of uncopied bytes |
| /* |
| * Here's where we rely on src and dst being incremented in tandem, |
| * See (3) above. |
| * dst += (fault addr - src) to put dst at first byte to clear |
| */ |
| ADD dst, t0 # compute start address in a1 |
| SUB dst, src |
| /* |
| * Clear len bytes starting at dst. Can't call __bzero because it |
| * might modify len. An inefficient loop for these rare times... |
| */ |
| .set reorder /* DADDI_WAR */ |
| SUB src, len, 1 |
| beqz len, .Ldone\@ |
| .set noreorder |
| 1: sb zero, 0(dst) |
| ADD dst, dst, 1 |
| .set push |
| .set noat |
| #ifndef CONFIG_CPU_DADDI_WORKAROUNDS |
| bnez src, 1b |
| SUB src, src, 1 |
| #else |
| li v1, 1 |
| bnez src, 1b |
| SUB src, src, v1 |
| #endif |
| li v1, -EFAULT |
| b .Ldone\@ |
| sw v1, (errptr) |
| |
| .Ls_exc\@: |
| li v0, -1 /* invalid checksum */ |
| li v1, -EFAULT |
| jr ra |
| sw v1, (errptr) |
| .set pop |
| .endm |
| |
| LEAF(__csum_partial_copy_kernel) |
| #ifndef CONFIG_EVA |
| FEXPORT(__csum_partial_copy_to_user) |
| FEXPORT(__csum_partial_copy_from_user) |
| #endif |
| __BUILD_CSUM_PARTIAL_COPY_USER LEGACY_MODE USEROP USEROP 1 |
| END(__csum_partial_copy_kernel) |
| |
| #ifdef CONFIG_EVA |
| LEAF(__csum_partial_copy_to_user) |
| __BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE KERNELOP USEROP 0 |
| END(__csum_partial_copy_to_user) |
| |
| LEAF(__csum_partial_copy_from_user) |
| __BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE USEROP KERNELOP 0 |
| END(__csum_partial_copy_from_user) |
| #endif |