| /* |
| * A hwmon driver for the Analog Devices ADT7473 |
| * Copyright (C) 2007 IBM |
| * |
| * Author: Darrick J. Wong <djwong@us.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/log2.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END }; |
| |
| /* ADT7473 registers */ |
| #define ADT7473_REG_BASE_ADDR 0x20 |
| |
| #define ADT7473_REG_VOLT_BASE_ADDR 0x21 |
| #define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46 |
| |
| #define ADT7473_REG_TEMP_BASE_ADDR 0x25 |
| #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E |
| #define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67 |
| #define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A |
| |
| #define ADT7473_REG_FAN_BASE_ADDR 0x28 |
| #define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54 |
| |
| #define ADT7473_REG_PWM_BASE_ADDR 0x30 |
| #define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64 |
| #define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38 |
| #define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C |
| #define ADT7473_PWM_BHVR_MASK 0xE0 |
| #define ADT7473_PWM_BHVR_SHIFT 5 |
| |
| #define ADT7473_REG_CFG1 0x40 |
| #define ADT7473_CFG1_START 0x01 |
| #define ADT7473_CFG1_READY 0x04 |
| #define ADT7473_REG_CFG2 0x73 |
| #define ADT7473_REG_CFG3 0x78 |
| #define ADT7473_REG_CFG4 0x7D |
| #define ADT7473_CFG4_MAX_DUTY_AT_OVT 0x08 |
| #define ADT7473_REG_CFG5 0x7C |
| #define ADT7473_CFG5_TEMP_TWOS 0x01 |
| #define ADT7473_CFG5_TEMP_OFFSET 0x02 |
| |
| #define ADT7473_REG_DEVICE 0x3D |
| #define ADT7473_VENDOR 0x41 |
| #define ADT7473_REG_VENDOR 0x3E |
| #define ADT7473_DEVICE 0x73 |
| #define ADT7473_REG_REVISION 0x3F |
| #define ADT7473_REV_68 0x68 |
| #define ADT7473_REV_69 0x69 |
| |
| #define ADT7473_REG_ALARM1 0x41 |
| #define ADT7473_VCCP_ALARM 0x02 |
| #define ADT7473_VCC_ALARM 0x04 |
| #define ADT7473_R1T_ALARM 0x10 |
| #define ADT7473_LT_ALARM 0x20 |
| #define ADT7473_R2T_ALARM 0x40 |
| #define ADT7473_OOL 0x80 |
| #define ADT7473_REG_ALARM2 0x42 |
| #define ADT7473_OVT_ALARM 0x02 |
| #define ADT7473_FAN1_ALARM 0x04 |
| #define ADT7473_FAN2_ALARM 0x08 |
| #define ADT7473_FAN3_ALARM 0x10 |
| #define ADT7473_FAN4_ALARM 0x20 |
| #define ADT7473_R1T_SHORT 0x40 |
| #define ADT7473_R2T_SHORT 0x80 |
| |
| #define ALARM2(x) ((x) << 8) |
| |
| #define ADT7473_VOLT_COUNT 2 |
| #define ADT7473_REG_VOLT(x) (ADT7473_REG_VOLT_BASE_ADDR + (x)) |
| #define ADT7473_REG_VOLT_MIN(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2)) |
| #define ADT7473_REG_VOLT_MAX(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + \ |
| ((x) * 2) + 1) |
| |
| #define ADT7473_TEMP_COUNT 3 |
| #define ADT7473_REG_TEMP(x) (ADT7473_REG_TEMP_BASE_ADDR + (x)) |
| #define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2)) |
| #define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \ |
| ((x) * 2) + 1) |
| #define ADT7473_REG_TEMP_TMIN(x) (ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x)) |
| #define ADT7473_REG_TEMP_TMAX(x) (ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x)) |
| |
| #define ADT7473_FAN_COUNT 4 |
| #define ADT7473_REG_FAN(x) (ADT7473_REG_FAN_BASE_ADDR + ((x) * 2)) |
| #define ADT7473_REG_FAN_MIN(x) (ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2)) |
| |
| #define ADT7473_PWM_COUNT 3 |
| #define ADT7473_REG_PWM(x) (ADT7473_REG_PWM_BASE_ADDR + (x)) |
| #define ADT7473_REG_PWM_MAX(x) (ADT7473_REG_PWM_MAX_BASE_ADDR + (x)) |
| #define ADT7473_REG_PWM_MIN(x) (ADT7473_REG_PWM_MIN_BASE_ADDR + (x)) |
| #define ADT7473_REG_PWM_BHVR(x) (ADT7473_REG_PWM_BHVR_BASE_ADDR + (x)) |
| |
| /* How often do we reread sensors values? (In jiffies) */ |
| #define SENSOR_REFRESH_INTERVAL (2 * HZ) |
| |
| /* How often do we reread sensor limit values? (In jiffies) */ |
| #define LIMIT_REFRESH_INTERVAL (60 * HZ) |
| |
| /* datasheet says to divide this number by the fan reading to get fan rpm */ |
| #define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) |
| #define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM |
| #define FAN_PERIOD_INVALID 65535 |
| #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) |
| |
| struct adt7473_data { |
| struct device *hwmon_dev; |
| struct attribute_group attrs; |
| struct mutex lock; |
| char sensors_valid; |
| char limits_valid; |
| unsigned long sensors_last_updated; /* In jiffies */ |
| unsigned long limits_last_updated; /* In jiffies */ |
| |
| u8 volt[ADT7473_VOLT_COUNT]; |
| s8 volt_min[ADT7473_VOLT_COUNT]; |
| s8 volt_max[ADT7473_VOLT_COUNT]; |
| |
| s8 temp[ADT7473_TEMP_COUNT]; |
| s8 temp_min[ADT7473_TEMP_COUNT]; |
| s8 temp_max[ADT7473_TEMP_COUNT]; |
| s8 temp_tmin[ADT7473_TEMP_COUNT]; |
| /* This is called the !THERM limit in the datasheet */ |
| s8 temp_tmax[ADT7473_TEMP_COUNT]; |
| |
| u16 fan[ADT7473_FAN_COUNT]; |
| u16 fan_min[ADT7473_FAN_COUNT]; |
| |
| u8 pwm[ADT7473_PWM_COUNT]; |
| u8 pwm_max[ADT7473_PWM_COUNT]; |
| u8 pwm_min[ADT7473_PWM_COUNT]; |
| u8 pwm_behavior[ADT7473_PWM_COUNT]; |
| |
| u8 temp_twos_complement; |
| u8 temp_offset; |
| |
| u16 alarm; |
| u8 max_duty_at_overheat; |
| }; |
| |
| static int adt7473_probe(struct i2c_client *client, |
| const struct i2c_device_id *id); |
| static int adt7473_detect(struct i2c_client *client, |
| struct i2c_board_info *info); |
| static int adt7473_remove(struct i2c_client *client); |
| |
| static const struct i2c_device_id adt7473_id[] = { |
| { "adt7473", 0 }, |
| { } |
| }; |
| |
| static struct i2c_driver adt7473_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "adt7473", |
| }, |
| .probe = adt7473_probe, |
| .remove = adt7473_remove, |
| .id_table = adt7473_id, |
| .detect = adt7473_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| /* |
| * 16-bit registers on the ADT7473 are low-byte first. The data sheet says |
| * that the low byte must be read before the high byte. |
| */ |
| static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg) |
| { |
| u16 foo; |
| foo = i2c_smbus_read_byte_data(client, reg); |
| foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); |
| return foo; |
| } |
| |
| static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg, |
| u16 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value & 0xFF) |
| && i2c_smbus_write_byte_data(client, reg + 1, value >> 8); |
| } |
| |
| static void adt7473_init_client(struct i2c_client *client) |
| { |
| int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1); |
| |
| if (!(reg & ADT7473_CFG1_READY)) { |
| dev_err(&client->dev, "Chip not ready.\n"); |
| } else { |
| /* start monitoring */ |
| i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1, |
| reg | ADT7473_CFG1_START); |
| } |
| } |
| |
| static struct adt7473_data *adt7473_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| unsigned long local_jiffies = jiffies; |
| u8 cfg; |
| int i; |
| |
| mutex_lock(&data->lock); |
| if (time_before(local_jiffies, data->sensors_last_updated + |
| SENSOR_REFRESH_INTERVAL) |
| && data->sensors_valid) |
| goto no_sensor_update; |
| |
| for (i = 0; i < ADT7473_VOLT_COUNT; i++) |
| data->volt[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_VOLT(i)); |
| |
| /* Determine temperature encoding */ |
| cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5); |
| data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS); |
| |
| /* |
| * What does this do? it implies a variable temperature sensor |
| * offset, but the datasheet doesn't say anything about this bit |
| * and other parts of the datasheet imply that "offset64" mode |
| * means that you shift temp values by -64 if the above bit was set. |
| */ |
| data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET); |
| |
| for (i = 0; i < ADT7473_TEMP_COUNT; i++) |
| data->temp[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_TEMP(i)); |
| |
| for (i = 0; i < ADT7473_FAN_COUNT; i++) |
| data->fan[i] = adt7473_read_word_data(client, |
| ADT7473_REG_FAN(i)); |
| |
| for (i = 0; i < ADT7473_PWM_COUNT; i++) |
| data->pwm[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM(i)); |
| |
| data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1); |
| if (data->alarm & ADT7473_OOL) |
| data->alarm |= ALARM2(i2c_smbus_read_byte_data(client, |
| ADT7473_REG_ALARM2)); |
| |
| data->sensors_last_updated = local_jiffies; |
| data->sensors_valid = 1; |
| |
| no_sensor_update: |
| if (time_before(local_jiffies, data->limits_last_updated + |
| LIMIT_REFRESH_INTERVAL) |
| && data->limits_valid) |
| goto out; |
| |
| for (i = 0; i < ADT7473_VOLT_COUNT; i++) { |
| data->volt_min[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_VOLT_MIN(i)); |
| data->volt_max[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_VOLT_MAX(i)); |
| } |
| |
| for (i = 0; i < ADT7473_TEMP_COUNT; i++) { |
| data->temp_min[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_TEMP_MIN(i)); |
| data->temp_max[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_TEMP_MAX(i)); |
| data->temp_tmin[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_TEMP_TMIN(i)); |
| data->temp_tmax[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_TEMP_TMAX(i)); |
| } |
| |
| for (i = 0; i < ADT7473_FAN_COUNT; i++) |
| data->fan_min[i] = adt7473_read_word_data(client, |
| ADT7473_REG_FAN_MIN(i)); |
| |
| for (i = 0; i < ADT7473_PWM_COUNT; i++) { |
| data->pwm_max[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM_MAX(i)); |
| data->pwm_min[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM_MIN(i)); |
| data->pwm_behavior[i] = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM_BHVR(i)); |
| } |
| |
| i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); |
| data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); |
| |
| data->limits_last_updated = local_jiffies; |
| data->limits_valid = 1; |
| |
| out: |
| mutex_unlock(&data->lock); |
| return data; |
| } |
| |
| /* |
| * Conversions |
| */ |
| |
| /* IN are scaled acording to built-in resistors */ |
| static const int adt7473_scaling[] = { /* .001 Volts */ |
| 2250, 3300 |
| }; |
| #define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) |
| |
| static int decode_volt(int volt_index, u8 raw) |
| { |
| return SCALE(raw, 192, adt7473_scaling[volt_index]); |
| } |
| |
| static u8 encode_volt(int volt_index, int cooked) |
| { |
| int raw = SCALE(cooked, adt7473_scaling[volt_index], 192); |
| return SENSORS_LIMIT(raw, 0, 255); |
| } |
| |
| static ssize_t show_volt_min(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", |
| decode_volt(attr->index, data->volt_min[attr->index])); |
| } |
| |
| static ssize_t set_volt_min(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long volt; |
| |
| if (strict_strtol(buf, 10, &volt)) |
| return -EINVAL; |
| |
| volt = encode_volt(attr->index, volt); |
| |
| mutex_lock(&data->lock); |
| data->volt_min[attr->index] = volt; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index), |
| volt); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_volt_max(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", |
| decode_volt(attr->index, data->volt_max[attr->index])); |
| } |
| |
| static ssize_t set_volt_max(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long volt; |
| |
| if (strict_strtol(buf, 10, &volt)) |
| return -EINVAL; |
| |
| volt = encode_volt(attr->index, volt); |
| |
| mutex_lock(&data->lock); |
| data->volt_max[attr->index] = volt; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index), |
| volt); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_volt(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| |
| return sprintf(buf, "%d\n", |
| decode_volt(attr->index, data->volt[attr->index])); |
| } |
| |
| /* |
| * This chip can report temperature data either as a two's complement |
| * number in the range -128 to 127, or as an unsigned number that must |
| * be offset by 64. |
| */ |
| static int decode_temp(u8 twos_complement, u8 raw) |
| { |
| return twos_complement ? (s8)raw : raw - 64; |
| } |
| |
| static u8 encode_temp(u8 twos_complement, int cooked) |
| { |
| u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; |
| return SENSORS_LIMIT(ret, 0, 255); |
| } |
| |
| static ssize_t show_temp_min(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * decode_temp( |
| data->temp_twos_complement, |
| data->temp_min[attr->index])); |
| } |
| |
| static ssize_t set_temp_min(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| temp = encode_temp(data->temp_twos_complement, temp); |
| |
| mutex_lock(&data->lock); |
| data->temp_min[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * decode_temp( |
| data->temp_twos_complement, |
| data->temp_max[attr->index])); |
| } |
| |
| static ssize_t set_temp_max(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| temp = encode_temp(data->temp_twos_complement, temp); |
| |
| mutex_lock(&data->lock); |
| data->temp_max[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * decode_temp( |
| data->temp_twos_complement, |
| data->temp[attr->index])); |
| } |
| |
| static ssize_t show_fan_min(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| |
| if (FAN_DATA_VALID(data->fan_min[attr->index])) |
| return sprintf(buf, "%d\n", |
| FAN_PERIOD_TO_RPM(data->fan_min[attr->index])); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t set_fan_min(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp) || !temp) |
| return -EINVAL; |
| |
| temp = FAN_RPM_TO_PERIOD(temp); |
| temp = SENSORS_LIMIT(temp, 1, 65534); |
| |
| mutex_lock(&data->lock); |
| data->fan_min[attr->index] = temp; |
| adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| |
| if (FAN_DATA_VALID(data->fan[attr->index])) |
| return sprintf(buf, "%d\n", |
| FAN_PERIOD_TO_RPM(data->fan[attr->index])); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t show_max_duty_at_crit(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", data->max_duty_at_overheat); |
| } |
| |
| static ssize_t set_max_duty_at_crit(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| u8 reg; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| data->max_duty_at_overheat = !!temp; |
| reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); |
| if (temp) |
| reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT; |
| else |
| reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm[attr->index]); |
| } |
| |
| static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = SENSORS_LIMIT(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_max(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_max[attr->index]); |
| } |
| |
| static ssize_t set_pwm_max(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = SENSORS_LIMIT(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_max[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_min(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_min[attr->index]); |
| } |
| |
| static ssize_t set_pwm_min(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = SENSORS_LIMIT(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_min[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp_tmax(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * decode_temp( |
| data->temp_twos_complement, |
| data->temp_tmax[attr->index])); |
| } |
| |
| static ssize_t set_temp_tmax(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| temp = encode_temp(data->temp_twos_complement, temp); |
| |
| mutex_lock(&data->lock); |
| data->temp_tmax[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp_tmin(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * decode_temp( |
| data->temp_twos_complement, |
| data->temp_tmin[attr->index])); |
| } |
| |
| static ssize_t set_temp_tmin(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| temp = encode_temp(data->temp_twos_complement, temp); |
| |
| mutex_lock(&data->lock); |
| data->temp_tmin[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_enable(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| |
| switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) { |
| case 3: |
| return sprintf(buf, "0\n"); |
| case 7: |
| return sprintf(buf, "1\n"); |
| default: |
| return sprintf(buf, "2\n"); |
| } |
| } |
| |
| static ssize_t set_pwm_enable(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| u8 reg; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| switch (temp) { |
| case 0: |
| temp = 3; |
| break; |
| case 1: |
| temp = 7; |
| break; |
| case 2: |
| /* Enter automatic mode with fans off */ |
| temp = 4; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mutex_lock(&data->lock); |
| reg = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM_BHVR(attr->index)); |
| reg = (temp << ADT7473_PWM_BHVR_SHIFT) | |
| (reg & ~ADT7473_PWM_BHVR_MASK); |
| i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), |
| reg); |
| data->pwm_behavior[attr->index] = reg; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_temp(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT; |
| |
| switch (bhvr) { |
| case 3: |
| case 4: |
| case 7: |
| return sprintf(buf, "0\n"); |
| case 0: |
| case 1: |
| case 5: |
| case 6: |
| return sprintf(buf, "%d\n", bhvr + 1); |
| case 2: |
| return sprintf(buf, "4\n"); |
| } |
| /* shouldn't ever get here */ |
| BUG(); |
| } |
| |
| static ssize_t set_pwm_auto_temp(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, |
| size_t count) |
| { |
| u8 reg; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| long temp; |
| |
| if (strict_strtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| switch (temp) { |
| case 1: |
| case 2: |
| case 6: |
| case 7: |
| temp--; |
| break; |
| case 0: |
| temp = 4; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mutex_lock(&data->lock); |
| reg = i2c_smbus_read_byte_data(client, |
| ADT7473_REG_PWM_BHVR(attr->index)); |
| reg = (temp << ADT7473_PWM_BHVR_SHIFT) | |
| (reg & ~ADT7473_PWM_BHVR_MASK); |
| i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), |
| reg); |
| data->pwm_behavior[attr->index] = reg; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_alarm(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7473_data *data = adt7473_update_device(dev); |
| |
| if (data->alarm & attr->index) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| |
| static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, |
| set_volt_max, 0); |
| static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, |
| set_volt_max, 1); |
| |
| static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, |
| set_volt_min, 0); |
| static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, |
| set_volt_min, 1); |
| |
| static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0); |
| static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1); |
| |
| static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, |
| ADT7473_VCCP_ALARM); |
| static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, |
| ADT7473_VCC_ALARM); |
| |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, |
| set_temp_max, 0); |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, |
| set_temp_max, 1); |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, |
| set_temp_max, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, |
| set_temp_min, 0); |
| static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, |
| set_temp_min, 1); |
| static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, |
| set_temp_min, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, |
| ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT)); |
| static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, |
| ADT7473_LT_ALARM); |
| static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, |
| ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT)); |
| |
| static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, |
| set_fan_min, 0); |
| static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, |
| set_fan_min, 1); |
| static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, |
| set_fan_min, 2); |
| static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, |
| set_fan_min, 3); |
| |
| static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); |
| static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); |
| static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); |
| static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); |
| |
| static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, |
| ALARM2(ADT7473_FAN1_ALARM)); |
| static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, |
| ALARM2(ADT7473_FAN2_ALARM)); |
| static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, |
| ALARM2(ADT7473_FAN3_ALARM)); |
| static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, |
| ALARM2(ADT7473_FAN4_ALARM)); |
| |
| static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO, |
| show_max_duty_at_crit, set_max_duty_at_crit, 0); |
| |
| static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); |
| static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); |
| static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); |
| |
| static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_min, set_pwm_min, 0); |
| static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_min, set_pwm_min, 1); |
| static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_min, set_pwm_min, 2); |
| |
| static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_max, set_pwm_max, 0); |
| static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_max, set_pwm_max, 1); |
| static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, |
| show_pwm_max, set_pwm_max, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmin, set_temp_tmin, 0); |
| static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmin, set_temp_tmin, 1); |
| static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmin, set_temp_tmin, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmax, set_temp_tmax, 0); |
| static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmax, set_temp_tmax, 1); |
| static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, |
| show_temp_tmax, set_temp_tmax, 2); |
| |
| static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, |
| set_pwm_enable, 0); |
| static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, |
| set_pwm_enable, 1); |
| static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, |
| set_pwm_enable, 2); |
| |
| static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, |
| show_pwm_auto_temp, set_pwm_auto_temp, 0); |
| static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, |
| show_pwm_auto_temp, set_pwm_auto_temp, 1); |
| static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, |
| show_pwm_auto_temp, set_pwm_auto_temp, 2); |
| |
| static struct attribute *adt7473_attr[] = |
| { |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, |
| |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan3_min.dev_attr.attr, |
| &sensor_dev_attr_fan4_min.dev_attr.attr, |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan3_input.dev_attr.attr, |
| &sensor_dev_attr_fan4_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan4_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr, |
| |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm3.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, |
| |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm3_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, |
| |
| NULL |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int adt7473_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int vendor, device, revision; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); |
| if (vendor != ADT7473_VENDOR) |
| return -ENODEV; |
| |
| device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); |
| if (device != ADT7473_DEVICE) |
| return -ENODEV; |
| |
| revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION); |
| if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) |
| return -ENODEV; |
| |
| strlcpy(info->type, "adt7473", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int adt7473_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct adt7473_data *data; |
| int err; |
| |
| data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); |
| if (!data) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| i2c_set_clientdata(client, data); |
| mutex_init(&data->lock); |
| |
| dev_info(&client->dev, "%s chip found\n", client->name); |
| |
| /* Initialize the ADT7473 chip */ |
| adt7473_init_client(client); |
| |
| /* Register sysfs hooks */ |
| data->attrs.attrs = adt7473_attr; |
| err = sysfs_create_group(&client->dev.kobj, &data->attrs); |
| if (err) |
| goto exit_free; |
| |
| data->hwmon_dev = hwmon_device_register(&client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove; |
| } |
| |
| return 0; |
| |
| exit_remove: |
| sysfs_remove_group(&client->dev.kobj, &data->attrs); |
| exit_free: |
| kfree(data); |
| exit: |
| return err; |
| } |
| |
| static int adt7473_remove(struct i2c_client *client) |
| { |
| struct adt7473_data *data = i2c_get_clientdata(client); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&client->dev.kobj, &data->attrs); |
| kfree(data); |
| return 0; |
| } |
| |
| static int __init adt7473_init(void) |
| { |
| pr_notice("The adt7473 driver is deprecated, please use the adt7475 " |
| "driver instead\n"); |
| return i2c_add_driver(&adt7473_driver); |
| } |
| |
| static void __exit adt7473_exit(void) |
| { |
| i2c_del_driver(&adt7473_driver); |
| } |
| |
| MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); |
| MODULE_DESCRIPTION("ADT7473 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(adt7473_init); |
| module_exit(adt7473_exit); |