| # |
| # arch/arm64/Makefile |
| # |
| # This file is included by the global makefile so that you can add your own |
| # architecture-specific flags and dependencies. |
| # |
| # This file is subject to the terms and conditions of the GNU General Public |
| # License. See the file "COPYING" in the main directory of this archive |
| # for more details. |
| # |
| # Copyright (C) 1995-2001 by Russell King |
| |
| LDFLAGS_vmlinux :=--no-undefined -X |
| CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) |
| GZFLAGS :=-9 |
| |
| ifeq ($(CONFIG_RELOCATABLE), y) |
| # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour |
| # for relative relocs, since this leads to better Image compression |
| # with the relocation offsets always being zero. |
| LDFLAGS_vmlinux += -shared -Bsymbolic -z notext \ |
| $(call ld-option, --no-apply-dynamic-relocs) |
| endif |
| |
| ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) |
| ifeq ($(call ld-option, --fix-cortex-a53-843419),) |
| $(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum) |
| else |
| LDFLAGS_vmlinux += --fix-cortex-a53-843419 |
| endif |
| endif |
| |
| # Check for binutils support for specific extensions |
| lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) |
| |
| ifeq ($(CONFIG_ARM64_LSE_ATOMICS), y) |
| ifeq ($(lseinstr),) |
| $(warning LSE atomics not supported by binutils) |
| endif |
| endif |
| |
| cc_has_k_constraint := $(call try-run,echo \ |
| 'int main(void) { \ |
| asm volatile("and w0, w0, %w0" :: "K" (4294967295)); \ |
| return 0; \ |
| }' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1) |
| |
| ifeq ($(CONFIG_ARM64), y) |
| brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1) |
| |
| ifneq ($(brokengasinst),) |
| $(warning Detected assembler with broken .inst; disassembly will be unreliable) |
| endif |
| endif |
| |
| KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) \ |
| $(compat_vdso) $(cc_has_k_constraint) |
| KBUILD_CFLAGS += -fno-asynchronous-unwind-tables |
| KBUILD_CFLAGS += $(call cc-disable-warning, psabi) |
| KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) $(compat_vdso) |
| |
| KBUILD_CFLAGS += $(call cc-option,-mabi=lp64) |
| KBUILD_AFLAGS += $(call cc-option,-mabi=lp64) |
| |
| ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y) |
| prepare: stack_protector_prepare |
| stack_protector_prepare: prepare0 |
| $(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg \ |
| -mstack-protector-guard-reg=sp_el0 \ |
| -mstack-protector-guard-offset=$(shell \ |
| awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \ |
| include/generated/asm-offsets.h)) |
| endif |
| |
| # Ensure that if the compiler supports branch protection we default it |
| # off. |
| KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none) |
| |
| ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) |
| KBUILD_CPPFLAGS += -mbig-endian |
| CHECKFLAGS += -D__AARCH64EB__ |
| AS += -EB |
| # Prefer the baremetal ELF build target, but not all toolchains include |
| # it so fall back to the standard linux version if needed. |
| KBUILD_LDFLAGS += -EB $(call ld-option, -maarch64elfb, -maarch64linuxb -z norelro) |
| UTS_MACHINE := aarch64_be |
| else |
| KBUILD_CPPFLAGS += -mlittle-endian |
| CHECKFLAGS += -D__AARCH64EL__ |
| AS += -EL |
| # Same as above, prefer ELF but fall back to linux target if needed. |
| KBUILD_LDFLAGS += -EL $(call ld-option, -maarch64elf, -maarch64linux -z norelro) |
| UTS_MACHINE := aarch64 |
| endif |
| |
| ifeq ($(CONFIG_LD_IS_LLD), y) |
| KBUILD_LDFLAGS += -z norelro |
| endif |
| |
| CHECKFLAGS += -D__aarch64__ |
| |
| ifeq ($(CONFIG_ARM64_MODULE_PLTS),y) |
| KBUILD_LDS_MODULE += $(srctree)/arch/arm64/kernel/module.lds |
| endif |
| |
| # Default value |
| head-y := arch/arm64/kernel/head.o |
| |
| # The byte offset of the kernel image in RAM from the start of RAM. |
| ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y) |
| TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \ |
| int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \ |
| rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}") |
| else |
| TEXT_OFFSET := 0x00080000 |
| endif |
| |
| ifeq ($(CONFIG_KASAN_SW_TAGS), y) |
| KASAN_SHADOW_SCALE_SHIFT := 4 |
| else |
| KASAN_SHADOW_SCALE_SHIFT := 3 |
| endif |
| |
| KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) |
| KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) |
| KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) |
| |
| export TEXT_OFFSET GZFLAGS |
| |
| core-y += arch/arm64/ |
| libs-y := arch/arm64/lib/ $(libs-y) |
| core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a |
| |
| # Default target when executing plain make |
| boot := arch/arm64/boot |
| KBUILD_IMAGE := $(boot)/Image.gz |
| |
| all: Image.gz |
| |
| |
| Image: vmlinux |
| $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ |
| |
| Image.%: Image |
| $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ |
| |
| zinstall install: |
| $(Q)$(MAKE) $(build)=$(boot) $@ |
| |
| PHONY += vdso_install |
| vdso_install: |
| $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ |
| $(if $(CONFIG_COMPAT_VDSO), \ |
| $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@) |
| |
| # We use MRPROPER_FILES and CLEAN_FILES now |
| archclean: |
| $(Q)$(MAKE) $(clean)=$(boot) |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| # We need to generate vdso-offsets.h before compiling certain files in kernel/. |
| # In order to do that, we should use the archprepare target, but we can't since |
| # asm-offsets.h is included in some files used to generate vdso-offsets.h, and |
| # asm-offsets.h is built in prepare0, for which archprepare is a dependency. |
| # Therefore we need to generate the header after prepare0 has been made, hence |
| # this hack. |
| prepare: vdso_prepare |
| vdso_prepare: prepare0 |
| $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h |
| $(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \ |
| $(build)=arch/arm64/kernel/vdso32 \ |
| include/generated/vdso32-offsets.h) |
| endif |
| |
| define archhelp |
| echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' |
| echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' |
| echo ' install - Install uncompressed kernel' |
| echo ' zinstall - Install compressed kernel' |
| echo ' Install using (your) ~/bin/installkernel or' |
| echo ' (distribution) /sbin/installkernel or' |
| echo ' install to $$(INSTALL_PATH) and run lilo' |
| endef |