PCI: iproc: Add outbound mapping support
Certain SoCs require the PCIe outbound mapping to be configured in
software. Add support for those chips.
[jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit
build.]
[arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error
in 32-bit build.]
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 62e8085..9193951 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -66,6 +66,18 @@
#define PCIE_DL_ACTIVE_SHIFT 2
#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
+#define OARR_VALID_SHIFT 0
+#define OARR_VALID BIT(OARR_VALID_SHIFT)
+#define OARR_SIZE_CFG_SHIFT 1
+#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
+
+#define OARR_LO(window) (0xd20 + (window) * 8)
+#define OARR_HI(window) (0xd24 + (window) * 8)
+#define OMAP_LO(window) (0xd40 + (window) * 8)
+#define OMAP_HI(window) (0xd44 + (window) * 8)
+
+#define MAX_NUM_OB_WINDOWS 2
+
static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
{
struct iproc_pcie *pcie;
@@ -212,6 +224,101 @@
writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
}
+/**
+ * Some iProc SoCs require the SW to configure the outbound address mapping
+ *
+ * Outbound address translation:
+ *
+ * iproc_pcie_address = axi_address - axi_offset
+ * OARR = iproc_pcie_address
+ * OMAP = pci_addr
+ *
+ * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
+ */
+static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
+ u64 pci_addr, resource_size_t size)
+{
+ struct iproc_pcie_ob *ob = &pcie->ob;
+ unsigned i;
+ u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS;
+ u64 remainder;
+
+ if (size > max_size) {
+ dev_err(pcie->dev,
+ "res size 0x%pap exceeds max supported size 0x%llx\n",
+ &size, max_size);
+ return -EINVAL;
+ }
+
+ div64_u64_rem(size, ob->window_size, &remainder);
+ if (remainder) {
+ dev_err(pcie->dev,
+ "res size %pap needs to be multiple of window size %pap\n",
+ &size, &ob->window_size);
+ return -EINVAL;
+ }
+
+ if (axi_addr < ob->axi_offset) {
+ dev_err(pcie->dev,
+ "axi address %pap less than offset %pap\n",
+ &axi_addr, &ob->axi_offset);
+ return -EINVAL;
+ }
+
+ /*
+ * Translate the AXI address to the internal address used by the iProc
+ * PCIe core before programming the OARR
+ */
+ axi_addr -= ob->axi_offset;
+
+ for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
+ writel(lower_32_bits(axi_addr) | OARR_VALID |
+ (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i));
+ writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i));
+ writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i));
+ writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i));
+
+ size -= ob->window_size;
+ if (size == 0)
+ break;
+
+ axi_addr += ob->window_size;
+ pci_addr += ob->window_size;
+ }
+
+ return 0;
+}
+
+static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
+ struct list_head *resources)
+{
+ struct resource_entry *window;
+ int ret;
+
+ resource_list_for_each_entry(window, resources) {
+ struct resource *res = window->res;
+ u64 res_type = resource_type(res);
+
+ switch (res_type) {
+ case IORESOURCE_IO:
+ case IORESOURCE_BUS:
+ break;
+ case IORESOURCE_MEM:
+ ret = iproc_pcie_setup_ob(pcie, res->start,
+ res->start - window->offset,
+ resource_size(res));
+ if (ret)
+ return ret;
+ break;
+ default:
+ dev_err(pcie->dev, "invalid resource %pR\n", res);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
int ret;
@@ -235,6 +342,14 @@
iproc_pcie_reset(pcie);
+ if (pcie->need_ob_cfg) {
+ ret = iproc_pcie_map_ranges(pcie, res);
+ if (ret) {
+ dev_err(pcie->dev, "map failed\n");
+ goto err_power_off_phy;
+ }
+ }
+
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;