| /* |
| * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * Freescale DIU Frame Buffer device driver |
| * |
| * Authors: Hongjun Chen <hong-jun.chen@freescale.com> |
| * Paul Widmer <paul.widmer@freescale.com> |
| * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| * York Sun <yorksun@freescale.com> |
| * |
| * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/uaccess.h> |
| #include <linux/vmalloc.h> |
| #include <linux/spinlock.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include <linux/fsl-diu-fb.h> |
| #include "edid.h" |
| |
| #define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */ |
| |
| /* HW cursor parameters */ |
| #define MAX_CURS 32 |
| |
| /* INT_STATUS/INT_MASK field descriptions */ |
| #define INT_VSYNC 0x01 /* Vsync interrupt */ |
| #define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ |
| #define INT_UNDRUN 0x04 /* Under run exception interrupt */ |
| #define INT_PARERR 0x08 /* Display parameters error interrupt */ |
| #define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ |
| |
| /* |
| * List of supported video modes |
| * |
| * The first entry is the default video mode. The remain entries are in |
| * order if increasing resolution and frequency. The 320x240-60 mode is |
| * the initial AOI for the second and third planes. |
| */ |
| static struct fb_videomode __devinitdata fsl_diu_mode_db[] = { |
| { |
| .refresh = 60, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15385, |
| .left_margin = 160, |
| .right_margin = 24, |
| .upper_margin = 29, |
| .lower_margin = 3, |
| .hsync_len = 136, |
| .vsync_len = 6, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 320, |
| .yres = 240, |
| .pixclock = 79440, |
| .left_margin = 16, |
| .right_margin = 16, |
| .upper_margin = 16, |
| .lower_margin = 5, |
| .hsync_len = 48, |
| .vsync_len = 1, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 640, |
| .yres = 480, |
| .pixclock = 39722, |
| .left_margin = 48, |
| .right_margin = 16, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| .hsync_len = 96, |
| .vsync_len = 2, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 72, |
| .xres = 640, |
| .yres = 480, |
| .pixclock = 32052, |
| .left_margin = 128, |
| .right_margin = 24, |
| .upper_margin = 28, |
| .lower_margin = 9, |
| .hsync_len = 40, |
| .vsync_len = 3, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 75, |
| .xres = 640, |
| .yres = 480, |
| .pixclock = 31747, |
| .left_margin = 120, |
| .right_margin = 16, |
| .upper_margin = 16, |
| .lower_margin = 1, |
| .hsync_len = 64, |
| .vsync_len = 3, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 90, |
| .xres = 640, |
| .yres = 480, |
| .pixclock = 25057, |
| .left_margin = 120, |
| .right_margin = 32, |
| .upper_margin = 14, |
| .lower_margin = 25, |
| .hsync_len = 40, |
| .vsync_len = 14, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 100, |
| .xres = 640, |
| .yres = 480, |
| .pixclock = 22272, |
| .left_margin = 48, |
| .right_margin = 32, |
| .upper_margin = 17, |
| .lower_margin = 22, |
| .hsync_len = 128, |
| .vsync_len = 12, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 800, |
| .yres = 480, |
| .pixclock = 33805, |
| .left_margin = 96, |
| .right_margin = 24, |
| .upper_margin = 10, |
| .lower_margin = 3, |
| .hsync_len = 72, |
| .vsync_len = 7, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 800, |
| .yres = 600, |
| .pixclock = 25000, |
| .left_margin = 88, |
| .right_margin = 40, |
| .upper_margin = 23, |
| .lower_margin = 1, |
| .hsync_len = 128, |
| .vsync_len = 4, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 854, |
| .yres = 480, |
| .pixclock = 31518, |
| .left_margin = 104, |
| .right_margin = 16, |
| .upper_margin = 13, |
| .lower_margin = 1, |
| .hsync_len = 88, |
| .vsync_len = 3, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 70, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 16886, |
| .left_margin = 3, |
| .right_margin = 3, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .hsync_len = 40, |
| .vsync_len = 18, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 75, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15009, |
| .left_margin = 3, |
| .right_margin = 3, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .hsync_len = 80, |
| .vsync_len = 32, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 480, |
| .pixclock = 18939, |
| .left_margin = 353, |
| .right_margin = 47, |
| .upper_margin = 39, |
| .lower_margin = 4, |
| .hsync_len = 8, |
| .vsync_len = 2, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 720, |
| .pixclock = 13426, |
| .left_margin = 192, |
| .right_margin = 64, |
| .upper_margin = 22, |
| .lower_margin = 1, |
| .hsync_len = 136, |
| .vsync_len = 3, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9375, |
| .left_margin = 38, |
| .right_margin = 128, |
| .upper_margin = 2, |
| .lower_margin = 7, |
| .hsync_len = 216, |
| .vsync_len = 37, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 70, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9380, |
| .left_margin = 6, |
| .right_margin = 6, |
| .upper_margin = 4, |
| .lower_margin = 4, |
| .hsync_len = 60, |
| .vsync_len = 94, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 75, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9380, |
| .left_margin = 6, |
| .right_margin = 6, |
| .upper_margin = 4, |
| .lower_margin = 4, |
| .hsync_len = 60, |
| .vsync_len = 15, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .refresh = 60, |
| .xres = 1920, |
| .yres = 1080, |
| .pixclock = 5787, |
| .left_margin = 328, |
| .right_margin = 120, |
| .upper_margin = 34, |
| .lower_margin = 1, |
| .hsync_len = 208, |
| .vsync_len = 3, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| }; |
| |
| static char *fb_mode; |
| static unsigned long default_bpp = 32; |
| static enum fsl_diu_monitor_port monitor_port; |
| static char *monitor_string; |
| |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| static u8 *coherence_data; |
| static size_t coherence_data_size; |
| static unsigned int d_cache_line_size; |
| #endif |
| |
| static DEFINE_SPINLOCK(diu_lock); |
| |
| enum mfb_index { |
| PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */ |
| PLANE1_AOI0, /* Plane 1, first AOI */ |
| PLANE1_AOI1, /* Plane 1, second AOI */ |
| PLANE2_AOI0, /* Plane 2, first AOI */ |
| PLANE2_AOI1, /* Plane 2, second AOI */ |
| }; |
| |
| struct mfb_info { |
| enum mfb_index index; |
| char *id; |
| int registered; |
| unsigned long pseudo_palette[16]; |
| struct diu_ad *ad; |
| int cursor_reset; |
| unsigned char g_alpha; |
| unsigned int count; |
| int x_aoi_d; /* aoi display x offset to physical screen */ |
| int y_aoi_d; /* aoi display y offset to physical screen */ |
| struct fsl_diu_data *parent; |
| u8 *edid_data; |
| }; |
| |
| /** |
| * struct fsl_diu_data - per-DIU data structure |
| * @dma_addr: DMA address of this structure |
| * @fsl_diu_info: fb_info objects, one per AOI |
| * @dev_attr: sysfs structure |
| * @irq: IRQ |
| * @monitor_port: the monitor port this DIU is connected to |
| * @diu_reg: pointer to the DIU hardware registers |
| * @reg_lock: spinlock for register access |
| * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI |
| * dummy_ad: DIU Area Descriptor for the dummy AOI |
| * @ad[]: Area Descriptors for each real AOI |
| * @gamma: gamma color table |
| * @cursor: hardware cursor data |
| * |
| * This data structure must be allocated with 32-byte alignment, so that the |
| * internal fields can be aligned properly. |
| */ |
| struct fsl_diu_data { |
| dma_addr_t dma_addr; |
| struct fb_info fsl_diu_info[NUM_AOIS]; |
| struct mfb_info mfb[NUM_AOIS]; |
| struct device_attribute dev_attr; |
| unsigned int irq; |
| enum fsl_diu_monitor_port monitor_port; |
| struct diu __iomem *diu_reg; |
| spinlock_t reg_lock; |
| u8 dummy_aoi[4 * 4 * 4]; |
| struct diu_ad dummy_ad __aligned(8); |
| struct diu_ad ad[NUM_AOIS] __aligned(8); |
| u8 gamma[256 * 3] __aligned(32); |
| u8 cursor[MAX_CURS * MAX_CURS * 2] __aligned(32); |
| } __aligned(32); |
| |
| /* Determine the DMA address of a member of the fsl_diu_data structure */ |
| #define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f)) |
| |
| static struct mfb_info mfb_template[] = { |
| { |
| .index = PLANE0, |
| .id = "Panel0", |
| .registered = 0, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 0, |
| }, |
| { |
| .index = PLANE1_AOI0, |
| .id = "Panel1 AOI0", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 0, |
| }, |
| { |
| .index = PLANE1_AOI1, |
| .id = "Panel1 AOI1", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 480, |
| }, |
| { |
| .index = PLANE2_AOI0, |
| .id = "Panel2 AOI0", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 640, |
| .y_aoi_d = 0, |
| }, |
| { |
| .index = PLANE2_AOI1, |
| .id = "Panel2 AOI1", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 640, |
| .y_aoi_d = 480, |
| }, |
| }; |
| |
| /** |
| * fsl_diu_name_to_port - convert a port name to a monitor port enum |
| * |
| * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns |
| * the enum fsl_diu_monitor_port that corresponds to that string. |
| * |
| * For compatibility with older versions, a number ("0", "1", or "2") is also |
| * supported. |
| * |
| * If the string is unknown, DVI is assumed. |
| * |
| * If the particular port is not supported by the platform, another port |
| * (platform-specific) is chosen instead. |
| */ |
| static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s) |
| { |
| enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI; |
| unsigned long val; |
| |
| if (s) { |
| if (!strict_strtoul(s, 10, &val) && (val <= 2)) |
| port = (enum fsl_diu_monitor_port) val; |
| else if (strncmp(s, "lvds", 4) == 0) |
| port = FSL_DIU_PORT_LVDS; |
| else if (strncmp(s, "dlvds", 5) == 0) |
| port = FSL_DIU_PORT_DLVDS; |
| } |
| |
| return diu_ops.valid_monitor_port(port); |
| } |
| |
| /* |
| * Workaround for failed writing desc register of planes. |
| * Needed with MPC5121 DIU rev 2.0 silicon. |
| */ |
| void wr_reg_wa(u32 *reg, u32 val) |
| { |
| do { |
| out_be32(reg, val); |
| } while (in_be32(reg) != val); |
| } |
| |
| static void fsl_diu_enable_panel(struct fb_info *info) |
| { |
| struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu __iomem *hw = data->diu_reg; |
| |
| switch (mfbi->index) { |
| case PLANE0: |
| if (hw->desc[0] != ad->paddr) |
| wr_reg_wa(&hw->desc[0], ad->paddr); |
| break; |
| case PLANE1_AOI0: |
| cmfbi = &data->mfb[2]; |
| if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ |
| if (cmfbi->count > 0) /* AOI1 open */ |
| ad->next_ad = |
| cpu_to_le32(cmfbi->ad->paddr); |
| else |
| ad->next_ad = 0; |
| wr_reg_wa(&hw->desc[1], ad->paddr); |
| } |
| break; |
| case PLANE2_AOI0: |
| cmfbi = &data->mfb[4]; |
| if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ |
| if (cmfbi->count > 0) /* AOI1 open */ |
| ad->next_ad = |
| cpu_to_le32(cmfbi->ad->paddr); |
| else |
| ad->next_ad = 0; |
| wr_reg_wa(&hw->desc[2], ad->paddr); |
| } |
| break; |
| case PLANE1_AOI1: |
| pmfbi = &data->mfb[1]; |
| ad->next_ad = 0; |
| if (hw->desc[1] == data->dummy_ad.paddr) |
| wr_reg_wa(&hw->desc[1], ad->paddr); |
| else /* AOI0 open */ |
| pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); |
| break; |
| case PLANE2_AOI1: |
| pmfbi = &data->mfb[3]; |
| ad->next_ad = 0; |
| if (hw->desc[2] == data->dummy_ad.paddr) |
| wr_reg_wa(&hw->desc[2], ad->paddr); |
| else /* AOI0 was open */ |
| pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); |
| break; |
| } |
| } |
| |
| static void fsl_diu_disable_panel(struct fb_info *info) |
| { |
| struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu __iomem *hw = data->diu_reg; |
| |
| switch (mfbi->index) { |
| case PLANE0: |
| if (hw->desc[0] != data->dummy_ad.paddr) |
| wr_reg_wa(&hw->desc[0], data->dummy_ad.paddr); |
| break; |
| case PLANE1_AOI0: |
| cmfbi = &data->mfb[2]; |
| if (cmfbi->count > 0) /* AOI1 is open */ |
| wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); |
| /* move AOI1 to the first */ |
| else /* AOI1 was closed */ |
| wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); |
| /* close AOI 0 */ |
| break; |
| case PLANE2_AOI0: |
| cmfbi = &data->mfb[4]; |
| if (cmfbi->count > 0) /* AOI1 is open */ |
| wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); |
| /* move AOI1 to the first */ |
| else /* AOI1 was closed */ |
| wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); |
| /* close AOI 0 */ |
| break; |
| case PLANE1_AOI1: |
| pmfbi = &data->mfb[1]; |
| if (hw->desc[1] != ad->paddr) { |
| /* AOI1 is not the first in the chain */ |
| if (pmfbi->count > 0) |
| /* AOI0 is open, must be the first */ |
| pmfbi->ad->next_ad = 0; |
| } else /* AOI1 is the first in the chain */ |
| wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); |
| /* close AOI 1 */ |
| break; |
| case PLANE2_AOI1: |
| pmfbi = &data->mfb[3]; |
| if (hw->desc[2] != ad->paddr) { |
| /* AOI1 is not the first in the chain */ |
| if (pmfbi->count > 0) |
| /* AOI0 is open, must be the first */ |
| pmfbi->ad->next_ad = 0; |
| } else /* AOI1 is the first in the chain */ |
| wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); |
| /* close AOI 1 */ |
| break; |
| } |
| } |
| |
| static void enable_lcdc(struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu __iomem *hw = data->diu_reg; |
| |
| out_be32(&hw->diu_mode, MFB_MODE1); |
| } |
| |
| static void disable_lcdc(struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu __iomem *hw = data->diu_reg; |
| |
| out_be32(&hw->diu_mode, 0); |
| } |
| |
| static void adjust_aoi_size_position(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; |
| struct fsl_diu_data *data = mfbi->parent; |
| int available_height, upper_aoi_bottom; |
| enum mfb_index index = mfbi->index; |
| int lower_aoi_is_open, upper_aoi_is_open; |
| __u32 base_plane_width, base_plane_height, upper_aoi_height; |
| |
| base_plane_width = data->fsl_diu_info[0].var.xres; |
| base_plane_height = data->fsl_diu_info[0].var.yres; |
| |
| if (mfbi->x_aoi_d < 0) |
| mfbi->x_aoi_d = 0; |
| if (mfbi->y_aoi_d < 0) |
| mfbi->y_aoi_d = 0; |
| switch (index) { |
| case PLANE0: |
| if (mfbi->x_aoi_d != 0) |
| mfbi->x_aoi_d = 0; |
| if (mfbi->y_aoi_d != 0) |
| mfbi->y_aoi_d = 0; |
| break; |
| case PLANE1_AOI0: |
| case PLANE2_AOI0: |
| lower_aoi_mfbi = data->fsl_diu_info[index+1].par; |
| lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; |
| if (var->xres > base_plane_width) |
| var->xres = base_plane_width; |
| if ((mfbi->x_aoi_d + var->xres) > base_plane_width) |
| mfbi->x_aoi_d = base_plane_width - var->xres; |
| |
| if (lower_aoi_is_open) |
| available_height = lower_aoi_mfbi->y_aoi_d; |
| else |
| available_height = base_plane_height; |
| if (var->yres > available_height) |
| var->yres = available_height; |
| if ((mfbi->y_aoi_d + var->yres) > available_height) |
| mfbi->y_aoi_d = available_height - var->yres; |
| break; |
| case PLANE1_AOI1: |
| case PLANE2_AOI1: |
| upper_aoi_mfbi = data->fsl_diu_info[index-1].par; |
| upper_aoi_height = data->fsl_diu_info[index-1].var.yres; |
| upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; |
| upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; |
| if (var->xres > base_plane_width) |
| var->xres = base_plane_width; |
| if ((mfbi->x_aoi_d + var->xres) > base_plane_width) |
| mfbi->x_aoi_d = base_plane_width - var->xres; |
| if (mfbi->y_aoi_d < 0) |
| mfbi->y_aoi_d = 0; |
| if (upper_aoi_is_open) { |
| if (mfbi->y_aoi_d < upper_aoi_bottom) |
| mfbi->y_aoi_d = upper_aoi_bottom; |
| available_height = base_plane_height |
| - upper_aoi_bottom; |
| } else |
| available_height = base_plane_height; |
| if (var->yres > available_height) |
| var->yres = available_height; |
| if ((mfbi->y_aoi_d + var->yres) > base_plane_height) |
| mfbi->y_aoi_d = base_plane_height - var->yres; |
| break; |
| } |
| } |
| /* |
| * Checks to see if the hardware supports the state requested by var passed |
| * in. This function does not alter the hardware state! If the var passed in |
| * is slightly off by what the hardware can support then we alter the var |
| * PASSED in to what we can do. If the hardware doesn't support mode change |
| * a -EINVAL will be returned by the upper layers. |
| */ |
| static int fsl_diu_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| if (var->xres_virtual < var->xres) |
| var->xres_virtual = var->xres; |
| if (var->yres_virtual < var->yres) |
| var->yres_virtual = var->yres; |
| |
| if (var->xoffset < 0) |
| var->xoffset = 0; |
| |
| if (var->yoffset < 0) |
| var->yoffset = 0; |
| |
| if (var->xoffset + info->var.xres > info->var.xres_virtual) |
| var->xoffset = info->var.xres_virtual - info->var.xres; |
| |
| if (var->yoffset + info->var.yres > info->var.yres_virtual) |
| var->yoffset = info->var.yres_virtual - info->var.yres; |
| |
| if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && |
| (var->bits_per_pixel != 16)) |
| var->bits_per_pixel = default_bpp; |
| |
| switch (var->bits_per_pixel) { |
| case 16: |
| var->red.length = 5; |
| var->red.offset = 11; |
| var->red.msb_right = 0; |
| |
| var->green.length = 6; |
| var->green.offset = 5; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 5; |
| var->blue.offset = 0; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 0; |
| var->transp.offset = 0; |
| var->transp.msb_right = 0; |
| break; |
| case 24: |
| var->red.length = 8; |
| var->red.offset = 0; |
| var->red.msb_right = 0; |
| |
| var->green.length = 8; |
| var->green.offset = 8; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 8; |
| var->blue.offset = 16; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 0; |
| var->transp.offset = 0; |
| var->transp.msb_right = 0; |
| break; |
| case 32: |
| var->red.length = 8; |
| var->red.offset = 16; |
| var->red.msb_right = 0; |
| |
| var->green.length = 8; |
| var->green.offset = 8; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 8; |
| var->blue.offset = 0; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 8; |
| var->transp.offset = 24; |
| var->transp.msb_right = 0; |
| |
| break; |
| } |
| |
| var->height = -1; |
| var->width = -1; |
| var->grayscale = 0; |
| |
| /* Copy nonstd field to/from sync for fbset usage */ |
| var->sync |= var->nonstd; |
| var->nonstd |= var->sync; |
| |
| adjust_aoi_size_position(var, info); |
| return 0; |
| } |
| |
| static void set_fix(struct fb_info *info) |
| { |
| struct fb_fix_screeninfo *fix = &info->fix; |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| |
| strncpy(fix->id, mfbi->id, sizeof(fix->id)); |
| fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| fix->type = FB_TYPE_PACKED_PIXELS; |
| fix->accel = FB_ACCEL_NONE; |
| fix->visual = FB_VISUAL_TRUECOLOR; |
| fix->xpanstep = 1; |
| fix->ypanstep = 1; |
| } |
| |
| static void update_lcdc(struct fb_info *info) |
| { |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu __iomem *hw; |
| int i, j; |
| u8 *gamma_table_base; |
| |
| u32 temp; |
| |
| hw = data->diu_reg; |
| |
| diu_ops.set_monitor_port(data->monitor_port); |
| gamma_table_base = data->gamma; |
| |
| /* Prep for DIU init - gamma table, cursor table */ |
| |
| for (i = 0; i <= 2; i++) |
| for (j = 0; j <= 255; j++) |
| *gamma_table_base++ = j; |
| |
| if (diu_ops.set_gamma_table) |
| diu_ops.set_gamma_table(data->monitor_port, data->gamma); |
| |
| disable_lcdc(info); |
| |
| /* Program DIU registers */ |
| |
| out_be32(&hw->gamma, DMA_ADDR(data, gamma)); |
| out_be32(&hw->cursor, DMA_ADDR(data, cursor)); |
| |
| out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */ |
| out_be32(&hw->bgnd_wb, 0); /* BGND_WB */ |
| out_be32(&hw->disp_size, (var->yres << 16 | var->xres)); |
| /* DISP SIZE */ |
| out_be32(&hw->wb_size, 0); /* WB SIZE */ |
| out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */ |
| |
| /* Horizontal and vertical configuration register */ |
| temp = var->left_margin << 22 | /* BP_H */ |
| var->hsync_len << 11 | /* PW_H */ |
| var->right_margin; /* FP_H */ |
| |
| out_be32(&hw->hsyn_para, temp); |
| |
| temp = var->upper_margin << 22 | /* BP_V */ |
| var->vsync_len << 11 | /* PW_V */ |
| var->lower_margin; /* FP_V */ |
| |
| out_be32(&hw->vsyn_para, temp); |
| |
| diu_ops.set_pixel_clock(var->pixclock); |
| |
| out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */ |
| out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */ |
| out_be32(&hw->plut, 0x01F5F666); |
| |
| /* Enable the DIU */ |
| enable_lcdc(info); |
| } |
| |
| static int map_video_memory(struct fb_info *info) |
| { |
| u32 smem_len = info->fix.line_length * info->var.yres_virtual; |
| void *p; |
| |
| p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO); |
| if (!p) { |
| dev_err(info->dev, "unable to allocate fb memory\n"); |
| return -ENOMEM; |
| } |
| mutex_lock(&info->mm_lock); |
| info->screen_base = p; |
| info->fix.smem_start = virt_to_phys(info->screen_base); |
| info->fix.smem_len = smem_len; |
| mutex_unlock(&info->mm_lock); |
| info->screen_size = info->fix.smem_len; |
| |
| return 0; |
| } |
| |
| static void unmap_video_memory(struct fb_info *info) |
| { |
| void *p = info->screen_base; |
| size_t l = info->fix.smem_len; |
| |
| mutex_lock(&info->mm_lock); |
| info->screen_base = NULL; |
| info->fix.smem_start = 0; |
| info->fix.smem_len = 0; |
| mutex_unlock(&info->mm_lock); |
| |
| if (p) |
| free_pages_exact(p, l); |
| } |
| |
| /* |
| * Using the fb_var_screeninfo in fb_info we set the aoi of this |
| * particular framebuffer. It is a light version of fsl_diu_set_par. |
| */ |
| static int fsl_diu_set_aoi(struct fb_info *info) |
| { |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| |
| /* AOI should not be greater than display size */ |
| ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); |
| ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); |
| return 0; |
| } |
| |
| /** |
| * fsl_diu_get_pixel_format: return the pixel format for a given color depth |
| * |
| * The pixel format is a 32-bit value that determine which bits in each |
| * pixel are to be used for each color. This is the default function used |
| * if the platform does not define its own version. |
| */ |
| static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) |
| { |
| #define PF_BYTE_F 0x10000000 |
| #define PF_ALPHA_C_MASK 0x0E000000 |
| #define PF_ALPHA_C_SHIFT 25 |
| #define PF_BLUE_C_MASK 0x01800000 |
| #define PF_BLUE_C_SHIFT 23 |
| #define PF_GREEN_C_MASK 0x00600000 |
| #define PF_GREEN_C_SHIFT 21 |
| #define PF_RED_C_MASK 0x00180000 |
| #define PF_RED_C_SHIFT 19 |
| #define PF_PALETTE 0x00040000 |
| #define PF_PIXEL_S_MASK 0x00030000 |
| #define PF_PIXEL_S_SHIFT 16 |
| #define PF_COMP_3_MASK 0x0000F000 |
| #define PF_COMP_3_SHIFT 12 |
| #define PF_COMP_2_MASK 0x00000F00 |
| #define PF_COMP_2_SHIFT 8 |
| #define PF_COMP_1_MASK 0x000000F0 |
| #define PF_COMP_1_SHIFT 4 |
| #define PF_COMP_0_MASK 0x0000000F |
| #define PF_COMP_0_SHIFT 0 |
| |
| #define MAKE_PF(alpha, red, blue, green, size, c0, c1, c2, c3) \ |
| cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ |
| (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ |
| (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ |
| (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \ |
| (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT)) |
| |
| switch (bits_per_pixel) { |
| case 32: |
| /* 0x88883316 */ |
| return MAKE_PF(3, 2, 0, 1, 3, 8, 8, 8, 8); |
| case 24: |
| /* 0x88082219 */ |
| return MAKE_PF(4, 0, 1, 2, 2, 0, 8, 8, 8); |
| case 16: |
| /* 0x65053118 */ |
| return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); |
| default: |
| pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); |
| return 0; |
| } |
| } |
| |
| /* |
| * Using the fb_var_screeninfo in fb_info we set the resolution of this |
| * particular framebuffer. This function alters the fb_fix_screeninfo stored |
| * in fb_info. It does not alter var in fb_info since we are using that |
| * data. This means we depend on the data in var inside fb_info to be |
| * supported by the hardware. fsl_diu_check_var is always called before |
| * fsl_diu_set_par to ensure this. |
| */ |
| static int fsl_diu_set_par(struct fb_info *info) |
| { |
| unsigned long len; |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *data = mfbi->parent; |
| struct diu_ad *ad = mfbi->ad; |
| struct diu __iomem *hw; |
| |
| hw = data->diu_reg; |
| |
| set_fix(info); |
| mfbi->cursor_reset = 1; |
| |
| len = info->var.yres_virtual * info->fix.line_length; |
| /* Alloc & dealloc each time resolution/bpp change */ |
| if (len != info->fix.smem_len) { |
| if (info->fix.smem_start) |
| unmap_video_memory(info); |
| |
| /* Memory allocation for framebuffer */ |
| if (map_video_memory(info)) { |
| dev_err(info->dev, "unable to allocate fb memory 1\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| if (diu_ops.get_pixel_format) |
| ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port, |
| var->bits_per_pixel); |
| else |
| ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel); |
| |
| ad->addr = cpu_to_le32(info->fix.smem_start); |
| ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | |
| var->xres_virtual) | mfbi->g_alpha; |
| /* AOI should not be greater than display size */ |
| ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); |
| ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); |
| ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); |
| |
| /* Disable chroma keying function */ |
| ad->ckmax_r = 0; |
| ad->ckmax_g = 0; |
| ad->ckmax_b = 0; |
| |
| ad->ckmin_r = 255; |
| ad->ckmin_g = 255; |
| ad->ckmin_b = 255; |
| |
| if (mfbi->index == PLANE0) |
| update_lcdc(info); |
| return 0; |
| } |
| |
| static inline __u32 CNVT_TOHW(__u32 val, __u32 width) |
| { |
| return ((val << width) + 0x7FFF - val) >> 16; |
| } |
| |
| /* |
| * Set a single color register. The values supplied have a 16 bit magnitude |
| * which needs to be scaled in this function for the hardware. Things to take |
| * into consideration are how many color registers, if any, are supported with |
| * the current color visual. With truecolor mode no color palettes are |
| * supported. Here a pseudo palette is created which we store the value in |
| * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited |
| * color palette. |
| */ |
| static int fsl_diu_setcolreg(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| unsigned int transp, struct fb_info *info) |
| { |
| int ret = 1; |
| |
| /* |
| * If greyscale is true, then we convert the RGB value |
| * to greyscale no matter what visual we are using. |
| */ |
| if (info->var.grayscale) |
| red = green = blue = (19595 * red + 38470 * green + |
| 7471 * blue) >> 16; |
| switch (info->fix.visual) { |
| case FB_VISUAL_TRUECOLOR: |
| /* |
| * 16-bit True Colour. We encode the RGB value |
| * according to the RGB bitfield information. |
| */ |
| if (regno < 16) { |
| u32 *pal = info->pseudo_palette; |
| u32 v; |
| |
| red = CNVT_TOHW(red, info->var.red.length); |
| green = CNVT_TOHW(green, info->var.green.length); |
| blue = CNVT_TOHW(blue, info->var.blue.length); |
| transp = CNVT_TOHW(transp, info->var.transp.length); |
| |
| v = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset) | |
| (transp << info->var.transp.offset); |
| |
| pal[regno] = v; |
| ret = 0; |
| } |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Pan (or wrap, depending on the `vmode' field) the display using the |
| * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values |
| * don't fit, return -EINVAL. |
| */ |
| static int fsl_diu_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| if ((info->var.xoffset == var->xoffset) && |
| (info->var.yoffset == var->yoffset)) |
| return 0; /* No change, do nothing */ |
| |
| if (var->xoffset < 0 || var->yoffset < 0 |
| || var->xoffset + info->var.xres > info->var.xres_virtual |
| || var->yoffset + info->var.yres > info->var.yres_virtual) |
| return -EINVAL; |
| |
| info->var.xoffset = var->xoffset; |
| info->var.yoffset = var->yoffset; |
| |
| if (var->vmode & FB_VMODE_YWRAP) |
| info->var.vmode |= FB_VMODE_YWRAP; |
| else |
| info->var.vmode &= ~FB_VMODE_YWRAP; |
| |
| fsl_diu_set_aoi(info); |
| |
| return 0; |
| } |
| |
| static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct mfb_info *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| struct mfb_chroma_key ck; |
| unsigned char global_alpha; |
| struct aoi_display_offset aoi_d; |
| __u32 pix_fmt; |
| void __user *buf = (void __user *)arg; |
| |
| if (!arg) |
| return -EINVAL; |
| switch (cmd) { |
| case MFB_SET_PIXFMT_OLD: |
| dev_warn(info->dev, |
| "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n", |
| MFB_SET_PIXFMT_OLD); |
| case MFB_SET_PIXFMT: |
| if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) |
| return -EFAULT; |
| ad->pix_fmt = pix_fmt; |
| break; |
| case MFB_GET_PIXFMT_OLD: |
| dev_warn(info->dev, |
| "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n", |
| MFB_GET_PIXFMT_OLD); |
| case MFB_GET_PIXFMT: |
| pix_fmt = ad->pix_fmt; |
| if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) |
| return -EFAULT; |
| break; |
| case MFB_SET_AOID: |
| if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) |
| return -EFAULT; |
| mfbi->x_aoi_d = aoi_d.x_aoi_d; |
| mfbi->y_aoi_d = aoi_d.y_aoi_d; |
| fsl_diu_check_var(&info->var, info); |
| fsl_diu_set_aoi(info); |
| break; |
| case MFB_GET_AOID: |
| aoi_d.x_aoi_d = mfbi->x_aoi_d; |
| aoi_d.y_aoi_d = mfbi->y_aoi_d; |
| if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) |
| return -EFAULT; |
| break; |
| case MFB_GET_ALPHA: |
| global_alpha = mfbi->g_alpha; |
| if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) |
| return -EFAULT; |
| break; |
| case MFB_SET_ALPHA: |
| /* set panel information */ |
| if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) |
| return -EFAULT; |
| ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | |
| (global_alpha & 0xff); |
| mfbi->g_alpha = global_alpha; |
| break; |
| case MFB_SET_CHROMA_KEY: |
| /* set panel winformation */ |
| if (copy_from_user(&ck, buf, sizeof(ck))) |
| return -EFAULT; |
| |
| if (ck.enable && |
| (ck.red_max < ck.red_min || |
| ck.green_max < ck.green_min || |
| ck.blue_max < ck.blue_min)) |
| return -EINVAL; |
| |
| if (!ck.enable) { |
| ad->ckmax_r = 0; |
| ad->ckmax_g = 0; |
| ad->ckmax_b = 0; |
| ad->ckmin_r = 255; |
| ad->ckmin_g = 255; |
| ad->ckmin_b = 255; |
| } else { |
| ad->ckmax_r = ck.red_max; |
| ad->ckmax_g = ck.green_max; |
| ad->ckmax_b = ck.blue_max; |
| ad->ckmin_r = ck.red_min; |
| ad->ckmin_g = ck.green_min; |
| ad->ckmin_b = ck.blue_min; |
| } |
| break; |
| default: |
| dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd); |
| return -ENOIOCTLCMD; |
| } |
| |
| return 0; |
| } |
| |
| /* turn on fb if count == 1 |
| */ |
| static int fsl_diu_open(struct fb_info *info, int user) |
| { |
| struct mfb_info *mfbi = info->par; |
| int res = 0; |
| |
| /* free boot splash memory on first /dev/fb0 open */ |
| if ((mfbi->index == PLANE0) && diu_ops.release_bootmem) |
| diu_ops.release_bootmem(); |
| |
| spin_lock(&diu_lock); |
| mfbi->count++; |
| if (mfbi->count == 1) { |
| fsl_diu_check_var(&info->var, info); |
| res = fsl_diu_set_par(info); |
| if (res < 0) |
| mfbi->count--; |
| else |
| fsl_diu_enable_panel(info); |
| } |
| |
| spin_unlock(&diu_lock); |
| return res; |
| } |
| |
| /* turn off fb if count == 0 |
| */ |
| static int fsl_diu_release(struct fb_info *info, int user) |
| { |
| struct mfb_info *mfbi = info->par; |
| int res = 0; |
| |
| spin_lock(&diu_lock); |
| mfbi->count--; |
| if (mfbi->count == 0) |
| fsl_diu_disable_panel(info); |
| |
| spin_unlock(&diu_lock); |
| return res; |
| } |
| |
| static struct fb_ops fsl_diu_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = fsl_diu_check_var, |
| .fb_set_par = fsl_diu_set_par, |
| .fb_setcolreg = fsl_diu_setcolreg, |
| .fb_pan_display = fsl_diu_pan_display, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_ioctl = fsl_diu_ioctl, |
| .fb_open = fsl_diu_open, |
| .fb_release = fsl_diu_release, |
| }; |
| |
| static int __devinit install_fb(struct fb_info *info) |
| { |
| int rc; |
| struct mfb_info *mfbi = info->par; |
| const char *aoi_mode, *init_aoi_mode = "320x240"; |
| struct fb_videomode *db = fsl_diu_mode_db; |
| unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); |
| int has_default_mode = 1; |
| |
| info->var.activate = FB_ACTIVATE_NOW; |
| info->fbops = &fsl_diu_ops; |
| info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK | |
| FBINFO_READS_FAST; |
| info->pseudo_palette = mfbi->pseudo_palette; |
| |
| rc = fb_alloc_cmap(&info->cmap, 16, 0); |
| if (rc) |
| return rc; |
| |
| if (mfbi->index == PLANE0) { |
| if (mfbi->edid_data) { |
| /* Now build modedb from EDID */ |
| fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs); |
| fb_videomode_to_modelist(info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| &info->modelist); |
| db = info->monspecs.modedb; |
| dbsize = info->monspecs.modedb_len; |
| } |
| aoi_mode = fb_mode; |
| } else { |
| aoi_mode = init_aoi_mode; |
| } |
| rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL, |
| default_bpp); |
| if (!rc) { |
| /* |
| * For plane 0 we continue and look into |
| * driver's internal modedb. |
| */ |
| if ((mfbi->index == PLANE0) && mfbi->edid_data) |
| has_default_mode = 0; |
| else |
| return -EINVAL; |
| } |
| |
| if (!has_default_mode) { |
| rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, |
| ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp); |
| if (rc) |
| has_default_mode = 1; |
| } |
| |
| /* Still not found, use preferred mode from database if any */ |
| if (!has_default_mode && info->monspecs.modedb) { |
| struct fb_monspecs *specs = &info->monspecs; |
| struct fb_videomode *modedb = &specs->modedb[0]; |
| |
| /* |
| * Get preferred timing. If not found, |
| * first mode in database will be used. |
| */ |
| if (specs->misc & FB_MISC_1ST_DETAIL) { |
| int i; |
| |
| for (i = 0; i < specs->modedb_len; i++) { |
| if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { |
| modedb = &specs->modedb[i]; |
| break; |
| } |
| } |
| } |
| |
| info->var.bits_per_pixel = default_bpp; |
| fb_videomode_to_var(&info->var, modedb); |
| } |
| |
| if (fsl_diu_check_var(&info->var, info)) { |
| dev_err(info->dev, "fsl_diu_check_var failed\n"); |
| unmap_video_memory(info); |
| fb_dealloc_cmap(&info->cmap); |
| return -EINVAL; |
| } |
| |
| if (register_framebuffer(info) < 0) { |
| dev_err(info->dev, "register_framebuffer failed\n"); |
| unmap_video_memory(info); |
| fb_dealloc_cmap(&info->cmap); |
| return -EINVAL; |
| } |
| |
| mfbi->registered = 1; |
| dev_info(info->dev, "%s registered successfully\n", mfbi->id); |
| |
| return 0; |
| } |
| |
| static void uninstall_fb(struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| |
| if (!mfbi->registered) |
| return; |
| |
| if (mfbi->index == PLANE0) |
| kfree(mfbi->edid_data); |
| |
| unregister_framebuffer(info); |
| unmap_video_memory(info); |
| if (&info->cmap) |
| fb_dealloc_cmap(&info->cmap); |
| |
| mfbi->registered = 0; |
| } |
| |
| static irqreturn_t fsl_diu_isr(int irq, void *dev_id) |
| { |
| struct diu __iomem *hw = dev_id; |
| unsigned int status = in_be32(&hw->int_status); |
| |
| if (status) { |
| /* This is the workaround for underrun */ |
| if (status & INT_UNDRUN) { |
| out_be32(&hw->diu_mode, 0); |
| udelay(1); |
| out_be32(&hw->diu_mode, 1); |
| } |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| else if (status & INT_VSYNC) { |
| unsigned int i; |
| |
| for (i = 0; i < coherence_data_size; |
| i += d_cache_line_size) |
| __asm__ __volatile__ ( |
| "dcbz 0, %[input]" |
| ::[input]"r"(&coherence_data[i])); |
| } |
| #endif |
| return IRQ_HANDLED; |
| } |
| return IRQ_NONE; |
| } |
| |
| static int request_irq_local(struct fsl_diu_data *data) |
| { |
| struct diu __iomem *hw = data->diu_reg; |
| u32 ints; |
| int ret; |
| |
| /* Read to clear the status */ |
| in_be32(&hw->int_status); |
| |
| ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", hw); |
| if (!ret) { |
| ints = INT_PARERR | INT_LS_BF_VS; |
| #if !defined(CONFIG_NOT_COHERENT_CACHE) |
| ints |= INT_VSYNC; |
| #endif |
| |
| /* Read to clear the status */ |
| in_be32(&hw->int_status); |
| out_be32(&hw->int_mask, ints); |
| } |
| |
| return ret; |
| } |
| |
| static void free_irq_local(struct fsl_diu_data *data) |
| { |
| struct diu __iomem *hw = data->diu_reg; |
| |
| /* Disable all LCDC interrupt */ |
| out_be32(&hw->int_mask, 0x1f); |
| |
| free_irq(data->irq, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * Power management hooks. Note that we won't be called from IRQ context, |
| * unlike the blank functions above, so we may sleep. |
| */ |
| static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) |
| { |
| struct fsl_diu_data *data; |
| |
| data = dev_get_drvdata(&ofdev->dev); |
| disable_lcdc(data->fsl_diu_info); |
| |
| return 0; |
| } |
| |
| static int fsl_diu_resume(struct platform_device *ofdev) |
| { |
| struct fsl_diu_data *data; |
| |
| data = dev_get_drvdata(&ofdev->dev); |
| enable_lcdc(data->fsl_diu_info); |
| |
| return 0; |
| } |
| |
| #else |
| #define fsl_diu_suspend NULL |
| #define fsl_diu_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static ssize_t store_monitor(struct device *device, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| enum fsl_diu_monitor_port old_monitor_port; |
| struct fsl_diu_data *data = |
| container_of(attr, struct fsl_diu_data, dev_attr); |
| |
| old_monitor_port = data->monitor_port; |
| data->monitor_port = fsl_diu_name_to_port(buf); |
| |
| if (old_monitor_port != data->monitor_port) { |
| /* All AOIs need adjust pixel format |
| * fsl_diu_set_par only change the pixsel format here |
| * unlikely to fail. */ |
| unsigned int i; |
| |
| for (i=0; i < NUM_AOIS; i++) |
| fsl_diu_set_par(&data->fsl_diu_info[i]); |
| } |
| return count; |
| } |
| |
| static ssize_t show_monitor(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fsl_diu_data *data = |
| container_of(attr, struct fsl_diu_data, dev_attr); |
| |
| switch (data->monitor_port) { |
| case FSL_DIU_PORT_DVI: |
| return sprintf(buf, "DVI\n"); |
| case FSL_DIU_PORT_LVDS: |
| return sprintf(buf, "Single-link LVDS\n"); |
| case FSL_DIU_PORT_DLVDS: |
| return sprintf(buf, "Dual-link LVDS\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int __devinit fsl_diu_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct mfb_info *mfbi; |
| struct fsl_diu_data *data; |
| int diu_mode; |
| dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */ |
| unsigned int i; |
| int ret; |
| |
| data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data), |
| &dma_addr, GFP_DMA | __GFP_ZERO); |
| if (!data) |
| return -ENOMEM; |
| data->dma_addr = dma_addr; |
| |
| /* |
| * dma_alloc_coherent() uses a page allocator, so the address is |
| * always page-aligned. We need the memory to be 32-byte aligned, |
| * so that's good. However, if one day the allocator changes, we |
| * need to catch that. It's not worth the effort to handle unaligned |
| * alloctions now because it's highly unlikely to ever be a problem. |
| */ |
| if ((unsigned long)data & 31) { |
| dev_err(&pdev->dev, "misaligned allocation"); |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| spin_lock_init(&data->reg_lock); |
| |
| for (i = 0; i < NUM_AOIS; i++) { |
| struct fb_info *info = &data->fsl_diu_info[i]; |
| |
| info->device = &pdev->dev; |
| info->par = &data->mfb[i]; |
| |
| /* |
| * We store the physical address of the AD in the reserved |
| * 'paddr' field of the AD itself. |
| */ |
| data->ad[i].paddr = DMA_ADDR(data, ad[i]); |
| |
| info->fix.smem_start = 0; |
| |
| /* Initialize the AOI data structure */ |
| mfbi = info->par; |
| memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); |
| mfbi->parent = data; |
| mfbi->ad = &data->ad[i]; |
| |
| if (mfbi->index == PLANE0) { |
| const u8 *prop; |
| int len; |
| |
| /* Get EDID */ |
| prop = of_get_property(np, "edid", &len); |
| if (prop && len == EDID_LENGTH) |
| mfbi->edid_data = kmemdup(prop, EDID_LENGTH, |
| GFP_KERNEL); |
| } |
| } |
| |
| data->diu_reg = of_iomap(np, 0); |
| if (!data->diu_reg) { |
| dev_err(&pdev->dev, "cannot map DIU registers\n"); |
| ret = -EFAULT; |
| goto error; |
| } |
| |
| diu_mode = in_be32(&data->diu_reg->diu_mode); |
| if (diu_mode == MFB_MODE0) |
| out_be32(&data->diu_reg->diu_mode, 0); /* disable DIU */ |
| |
| /* Get the IRQ of the DIU */ |
| data->irq = irq_of_parse_and_map(np, 0); |
| |
| if (!data->irq) { |
| dev_err(&pdev->dev, "could not get DIU IRQ\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| data->monitor_port = monitor_port; |
| |
| /* Initialize the dummy Area Descriptor */ |
| data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi)); |
| data->dummy_ad.pix_fmt = 0x88882317; |
| data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4); |
| data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2); |
| data->dummy_ad.offset_xyi = 0; |
| data->dummy_ad.offset_xyd = 0; |
| data->dummy_ad.next_ad = 0; |
| data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad); |
| |
| /* |
| * Let DIU display splash screen if it was pre-initialized |
| * by the bootloader, set dummy area descriptor otherwise. |
| */ |
| if (diu_mode == MFB_MODE0) |
| out_be32(&data->diu_reg->desc[0], data->dummy_ad.paddr); |
| |
| out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); |
| out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); |
| |
| for (i = 0; i < NUM_AOIS; i++) { |
| ret = install_fb(&data->fsl_diu_info[i]); |
| if (ret) { |
| dev_err(&pdev->dev, "could not register fb %d\n", i); |
| goto error; |
| } |
| } |
| |
| if (request_irq_local(data)) { |
| dev_err(&pdev->dev, "could not claim irq\n"); |
| goto error; |
| } |
| |
| sysfs_attr_init(&data->dev_attr.attr); |
| data->dev_attr.attr.name = "monitor"; |
| data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; |
| data->dev_attr.show = show_monitor; |
| data->dev_attr.store = store_monitor; |
| ret = device_create_file(&pdev->dev, &data->dev_attr); |
| if (ret) { |
| dev_err(&pdev->dev, "could not create sysfs file %s\n", |
| data->dev_attr.attr.name); |
| } |
| |
| dev_set_drvdata(&pdev->dev, data); |
| return 0; |
| |
| error: |
| for (i = 0; i < NUM_AOIS; i++) |
| uninstall_fb(&data->fsl_diu_info[i]); |
| |
| iounmap(data->diu_reg); |
| |
| return ret; |
| } |
| |
| static int fsl_diu_remove(struct platform_device *pdev) |
| { |
| struct fsl_diu_data *data; |
| int i; |
| |
| data = dev_get_drvdata(&pdev->dev); |
| disable_lcdc(&data->fsl_diu_info[0]); |
| free_irq_local(data); |
| |
| for (i = 0; i < NUM_AOIS; i++) |
| uninstall_fb(&data->fsl_diu_info[i]); |
| |
| iounmap(data->diu_reg); |
| |
| return 0; |
| } |
| |
| #ifndef MODULE |
| static int __init fsl_diu_setup(char *options) |
| { |
| char *opt; |
| unsigned long val; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((opt = strsep(&options, ",")) != NULL) { |
| if (!*opt) |
| continue; |
| if (!strncmp(opt, "monitor=", 8)) { |
| monitor_port = fsl_diu_name_to_port(opt + 8); |
| } else if (!strncmp(opt, "bpp=", 4)) { |
| if (!strict_strtoul(opt + 4, 10, &val)) |
| default_bpp = val; |
| } else |
| fb_mode = opt; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static struct of_device_id fsl_diu_match[] = { |
| #ifdef CONFIG_PPC_MPC512x |
| { |
| .compatible = "fsl,mpc5121-diu", |
| }, |
| #endif |
| { |
| .compatible = "fsl,diu", |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_diu_match); |
| |
| static struct platform_driver fsl_diu_driver = { |
| .driver = { |
| .name = "fsl-diu-fb", |
| .owner = THIS_MODULE, |
| .of_match_table = fsl_diu_match, |
| }, |
| .probe = fsl_diu_probe, |
| .remove = fsl_diu_remove, |
| .suspend = fsl_diu_suspend, |
| .resume = fsl_diu_resume, |
| }; |
| |
| static int __init fsl_diu_init(void) |
| { |
| #ifdef CONFIG_NOT_COHERENT_CACHE |
| struct device_node *np; |
| const u32 *prop; |
| #endif |
| int ret; |
| #ifndef MODULE |
| char *option; |
| |
| /* |
| * For kernel boot options (in 'video=xxxfb:<options>' format) |
| */ |
| if (fb_get_options("fslfb", &option)) |
| return -ENODEV; |
| fsl_diu_setup(option); |
| #else |
| monitor_port = fsl_diu_name_to_port(monitor_string); |
| #endif |
| pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n"); |
| |
| #ifdef CONFIG_NOT_COHERENT_CACHE |
| np = of_find_node_by_type(NULL, "cpu"); |
| if (!np) { |
| pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); |
| return -ENODEV; |
| } |
| |
| prop = of_get_property(np, "d-cache-size", NULL); |
| if (prop == NULL) { |
| pr_err("fsl-diu-fb: missing 'd-cache-size' property' " |
| "in 'cpu' node\n"); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| /* |
| * Freescale PLRU requires 13/8 times the cache size to do a proper |
| * displacement flush |
| */ |
| coherence_data_size = be32_to_cpup(prop) * 13; |
| coherence_data_size /= 8; |
| |
| prop = of_get_property(np, "d-cache-line-size", NULL); |
| if (prop == NULL) { |
| pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " |
| "in 'cpu' node\n"); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| d_cache_line_size = be32_to_cpup(prop); |
| |
| of_node_put(np); |
| coherence_data = vmalloc(coherence_data_size); |
| if (!coherence_data) |
| return -ENOMEM; |
| #endif |
| |
| ret = platform_driver_register(&fsl_diu_driver); |
| if (ret) { |
| pr_err("fsl-diu-fb: failed to register platform driver\n"); |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| vfree(coherence_data); |
| #endif |
| } |
| return ret; |
| } |
| |
| static void __exit fsl_diu_exit(void) |
| { |
| platform_driver_unregister(&fsl_diu_driver); |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| vfree(coherence_data); |
| #endif |
| } |
| |
| module_init(fsl_diu_init); |
| module_exit(fsl_diu_exit); |
| |
| MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); |
| MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param_named(mode, fb_mode, charp, 0); |
| MODULE_PARM_DESC(mode, |
| "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); |
| module_param_named(bpp, default_bpp, ulong, 0); |
| MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'"); |
| module_param_named(monitor, monitor_string, charp, 0); |
| MODULE_PARM_DESC(monitor, "Specify the monitor port " |
| "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform"); |
| |