Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 1 | /* |
| 2 | * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices |
| 3 | * |
| 4 | * Author : Liu Junliang <liujunliang_ljl@163.com> |
| 5 | * |
| 6 | * Based on dm9601.c |
| 7 | * |
| 8 | * This file is licensed under the terms of the GNU General Public License |
| 9 | * version 2. This program is licensed "as is" without any warranty of any |
| 10 | * kind, whether express or implied. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/sched.h> |
| 15 | #include <linux/stddef.h> |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 16 | #include <linux/netdevice.h> |
| 17 | #include <linux/etherdevice.h> |
| 18 | #include <linux/ethtool.h> |
| 19 | #include <linux/mii.h> |
| 20 | #include <linux/usb.h> |
| 21 | #include <linux/crc32.h> |
| 22 | #include <linux/usb/usbnet.h> |
| 23 | |
| 24 | #include "sr9700.h" |
| 25 | |
| 26 | static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data) |
| 27 | { |
| 28 | int err; |
| 29 | |
| 30 | err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data, |
| 31 | length); |
| 32 | if ((err != length) && (err >= 0)) |
| 33 | err = -EINVAL; |
| 34 | return err; |
| 35 | } |
| 36 | |
| 37 | static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data) |
| 38 | { |
| 39 | int err; |
| 40 | |
| 41 | err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data, |
| 42 | length); |
| 43 | if ((err >= 0) && (err < length)) |
| 44 | err = -EINVAL; |
| 45 | return err; |
| 46 | } |
| 47 | |
| 48 | static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value) |
| 49 | { |
| 50 | return sr_read(dev, reg, 1, value); |
| 51 | } |
| 52 | |
| 53 | static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value) |
| 54 | { |
| 55 | return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| 56 | value, reg, NULL, 0); |
| 57 | } |
| 58 | |
| 59 | static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) |
| 60 | { |
| 61 | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| 62 | 0, reg, data, length); |
| 63 | } |
| 64 | |
| 65 | static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value) |
| 66 | { |
| 67 | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| 68 | value, reg, NULL, 0); |
| 69 | } |
| 70 | |
| 71 | static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) |
| 72 | { |
| 73 | int i; |
| 74 | |
| 75 | for (i = 0; i < SR_SHARE_TIMEOUT; i++) { |
| 76 | u8 tmp = 0; |
| 77 | int ret; |
| 78 | |
| 79 | udelay(1); |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 80 | ret = sr_read_reg(dev, SR_EPCR, &tmp); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 81 | if (ret < 0) |
| 82 | return ret; |
| 83 | |
| 84 | /* ready */ |
| 85 | if (!(tmp & EPCR_ERRE)) |
| 86 | return 0; |
| 87 | } |
| 88 | |
| 89 | netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom"); |
| 90 | |
| 91 | return -EIO; |
| 92 | } |
| 93 | |
| 94 | static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, |
| 95 | __le16 *value) |
| 96 | { |
| 97 | int ret; |
| 98 | |
| 99 | mutex_lock(&dev->phy_mutex); |
| 100 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 101 | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); |
| 102 | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 103 | |
| 104 | ret = wait_phy_eeprom_ready(dev, phy); |
| 105 | if (ret < 0) |
| 106 | goto out_unlock; |
| 107 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 108 | sr_write_reg(dev, SR_EPCR, 0x0); |
| 109 | ret = sr_read(dev, SR_EPDR, 2, value); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 110 | |
| 111 | netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", |
| 112 | phy, reg, *value, ret); |
| 113 | |
| 114 | out_unlock: |
| 115 | mutex_unlock(&dev->phy_mutex); |
| 116 | return ret; |
| 117 | } |
| 118 | |
| 119 | static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, |
| 120 | __le16 value) |
| 121 | { |
| 122 | int ret; |
| 123 | |
| 124 | mutex_lock(&dev->phy_mutex); |
| 125 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 126 | ret = sr_write(dev, SR_EPDR, 2, &value); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 127 | if (ret < 0) |
| 128 | goto out_unlock; |
| 129 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 130 | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); |
| 131 | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 132 | (EPCR_WEP | EPCR_ERPRW)); |
| 133 | |
| 134 | ret = wait_phy_eeprom_ready(dev, phy); |
| 135 | if (ret < 0) |
| 136 | goto out_unlock; |
| 137 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 138 | sr_write_reg(dev, SR_EPCR, 0x0); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 139 | |
| 140 | out_unlock: |
| 141 | mutex_unlock(&dev->phy_mutex); |
| 142 | return ret; |
| 143 | } |
| 144 | |
| 145 | static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) |
| 146 | { |
| 147 | return sr_share_read_word(dev, 0, offset, value); |
| 148 | } |
| 149 | |
| 150 | static int sr9700_get_eeprom_len(struct net_device *netdev) |
| 151 | { |
| 152 | return SR_EEPROM_LEN; |
| 153 | } |
| 154 | |
| 155 | static int sr9700_get_eeprom(struct net_device *netdev, |
| 156 | struct ethtool_eeprom *eeprom, u8 *data) |
| 157 | { |
| 158 | struct usbnet *dev = netdev_priv(netdev); |
| 159 | __le16 *buf = (__le16 *)data; |
| 160 | int ret = 0; |
| 161 | int i; |
| 162 | |
| 163 | /* access is 16bit */ |
| 164 | if ((eeprom->offset & 0x01) || (eeprom->len & 0x01)) |
| 165 | return -EINVAL; |
| 166 | |
| 167 | for (i = 0; i < eeprom->len / 2; i++) { |
| 168 | ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i); |
| 169 | if (ret < 0) |
| 170 | break; |
| 171 | } |
| 172 | |
| 173 | return ret; |
| 174 | } |
| 175 | |
| 176 | static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| 177 | { |
| 178 | struct usbnet *dev = netdev_priv(netdev); |
| 179 | __le16 res; |
| 180 | int rc = 0; |
| 181 | |
| 182 | if (phy_id) { |
| 183 | netdev_dbg(netdev, "Only internal phy supported\n"); |
| 184 | return 0; |
| 185 | } |
| 186 | |
| 187 | /* Access NSR_LINKST bit for link status instead of MII_BMSR */ |
| 188 | if (loc == MII_BMSR) { |
| 189 | u8 value; |
| 190 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 191 | sr_read_reg(dev, SR_NSR, &value); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 192 | if (value & NSR_LINKST) |
| 193 | rc = 1; |
| 194 | } |
| 195 | sr_share_read_word(dev, 1, loc, &res); |
| 196 | if (rc == 1) |
| 197 | res = le16_to_cpu(res) | BMSR_LSTATUS; |
| 198 | else |
| 199 | res = le16_to_cpu(res) & ~BMSR_LSTATUS; |
| 200 | |
| 201 | netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| 202 | phy_id, loc, res); |
| 203 | |
| 204 | return res; |
| 205 | } |
| 206 | |
| 207 | static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, |
| 208 | int val) |
| 209 | { |
| 210 | struct usbnet *dev = netdev_priv(netdev); |
| 211 | __le16 res = cpu_to_le16(val); |
| 212 | |
| 213 | if (phy_id) { |
| 214 | netdev_dbg(netdev, "Only internal phy supported\n"); |
| 215 | return; |
| 216 | } |
| 217 | |
| 218 | netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| 219 | phy_id, loc, val); |
| 220 | |
| 221 | sr_share_write_word(dev, 1, loc, res); |
| 222 | } |
| 223 | |
| 224 | static u32 sr9700_get_link(struct net_device *netdev) |
| 225 | { |
| 226 | struct usbnet *dev = netdev_priv(netdev); |
| 227 | u8 value = 0; |
| 228 | int rc = 0; |
| 229 | |
| 230 | /* Get the Link Status directly */ |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 231 | sr_read_reg(dev, SR_NSR, &value); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 232 | if (value & NSR_LINKST) |
| 233 | rc = 1; |
| 234 | |
| 235 | return rc; |
| 236 | } |
| 237 | |
| 238 | static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| 239 | { |
| 240 | struct usbnet *dev = netdev_priv(netdev); |
| 241 | |
| 242 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| 243 | } |
| 244 | |
| 245 | static const struct ethtool_ops sr9700_ethtool_ops = { |
| 246 | .get_drvinfo = usbnet_get_drvinfo, |
| 247 | .get_link = sr9700_get_link, |
| 248 | .get_msglevel = usbnet_get_msglevel, |
| 249 | .set_msglevel = usbnet_set_msglevel, |
| 250 | .get_eeprom_len = sr9700_get_eeprom_len, |
| 251 | .get_eeprom = sr9700_get_eeprom, |
| 252 | .get_settings = usbnet_get_settings, |
| 253 | .set_settings = usbnet_set_settings, |
| 254 | .nway_reset = usbnet_nway_reset, |
| 255 | }; |
| 256 | |
| 257 | static void sr9700_set_multicast(struct net_device *netdev) |
| 258 | { |
| 259 | struct usbnet *dev = netdev_priv(netdev); |
| 260 | /* We use the 20 byte dev->data for our 8 byte filter buffer |
| 261 | * to avoid allocating memory that is tricky to free later |
| 262 | */ |
| 263 | u8 *hashes = (u8 *)&dev->data; |
| 264 | /* rx_ctl setting : enable, disable_long, disable_crc */ |
| 265 | u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG; |
| 266 | |
| 267 | memset(hashes, 0x00, SR_MCAST_SIZE); |
| 268 | /* broadcast address */ |
| 269 | hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG; |
| 270 | if (netdev->flags & IFF_PROMISC) { |
| 271 | rx_ctl |= RCR_PRMSC; |
| 272 | } else if (netdev->flags & IFF_ALLMULTI || |
| 273 | netdev_mc_count(netdev) > SR_MCAST_MAX) { |
| 274 | rx_ctl |= RCR_RUNT; |
| 275 | } else if (!netdev_mc_empty(netdev)) { |
| 276 | struct netdev_hw_addr *ha; |
| 277 | |
| 278 | netdev_for_each_mc_addr(ha, netdev) { |
| 279 | u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| 280 | hashes[crc >> 3] |= 1 << (crc & 0x7); |
| 281 | } |
| 282 | } |
| 283 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 284 | sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); |
| 285 | sr_write_reg_async(dev, SR_RCR, rx_ctl); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 286 | } |
| 287 | |
| 288 | static int sr9700_set_mac_address(struct net_device *netdev, void *p) |
| 289 | { |
| 290 | struct usbnet *dev = netdev_priv(netdev); |
| 291 | struct sockaddr *addr = p; |
| 292 | |
| 293 | if (!is_valid_ether_addr(addr->sa_data)) { |
| 294 | netdev_err(netdev, "not setting invalid mac address %pM\n", |
| 295 | addr->sa_data); |
| 296 | return -EINVAL; |
| 297 | } |
| 298 | |
| 299 | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 300 | sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 301 | |
| 302 | return 0; |
| 303 | } |
| 304 | |
| 305 | static const struct net_device_ops sr9700_netdev_ops = { |
| 306 | .ndo_open = usbnet_open, |
| 307 | .ndo_stop = usbnet_stop, |
| 308 | .ndo_start_xmit = usbnet_start_xmit, |
| 309 | .ndo_tx_timeout = usbnet_tx_timeout, |
| 310 | .ndo_change_mtu = usbnet_change_mtu, |
| 311 | .ndo_validate_addr = eth_validate_addr, |
| 312 | .ndo_do_ioctl = sr9700_ioctl, |
| 313 | .ndo_set_rx_mode = sr9700_set_multicast, |
| 314 | .ndo_set_mac_address = sr9700_set_mac_address, |
| 315 | }; |
| 316 | |
| 317 | static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) |
| 318 | { |
| 319 | struct net_device *netdev; |
| 320 | struct mii_if_info *mii; |
| 321 | int ret; |
| 322 | |
| 323 | ret = usbnet_get_endpoints(dev, intf); |
| 324 | if (ret) |
| 325 | goto out; |
| 326 | |
| 327 | netdev = dev->net; |
| 328 | |
| 329 | netdev->netdev_ops = &sr9700_netdev_ops; |
| 330 | netdev->ethtool_ops = &sr9700_ethtool_ops; |
| 331 | netdev->hard_header_len += SR_TX_OVERHEAD; |
| 332 | dev->hard_mtu = netdev->mtu + netdev->hard_header_len; |
| 333 | /* bulkin buffer is preferably not less than 3K */ |
| 334 | dev->rx_urb_size = 3072; |
| 335 | |
| 336 | mii = &dev->mii; |
| 337 | mii->dev = netdev; |
| 338 | mii->mdio_read = sr_mdio_read; |
| 339 | mii->mdio_write = sr_mdio_write; |
| 340 | mii->phy_id_mask = 0x1f; |
| 341 | mii->reg_num_mask = 0x1f; |
| 342 | |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 343 | sr_write_reg(dev, SR_NCR, NCR_RST); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 344 | udelay(20); |
| 345 | |
| 346 | /* read MAC |
| 347 | * After Chip Power on, the Chip will reload the MAC from |
| 348 | * EEPROM automatically to PAR. In case there is no EEPROM externally, |
| 349 | * a default MAC address is stored in PAR for making chip work properly. |
| 350 | */ |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 351 | if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 352 | netdev_err(netdev, "Error reading MAC address\n"); |
| 353 | ret = -ENODEV; |
| 354 | goto out; |
| 355 | } |
| 356 | |
| 357 | /* power up and reset phy */ |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 358 | sr_write_reg(dev, SR_PRR, PRR_PHY_RST); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 359 | /* at least 10ms, here 20ms for safe */ |
| 360 | mdelay(20); |
Chen Gang | 06b19b1 | 2015-02-03 05:00:40 +0800 | [diff] [blame] | 361 | sr_write_reg(dev, SR_PRR, 0); |
Liu Junliang | c9b3745 | 2013-09-01 19:38:08 +0800 | [diff] [blame] | 362 | /* at least 1ms, here 2ms for reading right register */ |
| 363 | udelay(2 * 1000); |
| 364 | |
| 365 | /* receive broadcast packets */ |
| 366 | sr9700_set_multicast(netdev); |
| 367 | |
| 368 | sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); |
| 369 | sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL | |
| 370 | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); |
| 371 | mii_nway_restart(mii); |
| 372 | |
| 373 | out: |
| 374 | return ret; |
| 375 | } |
| 376 | |
| 377 | static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| 378 | { |
| 379 | struct sk_buff *sr_skb; |
| 380 | int len; |
| 381 | |
| 382 | /* skb content (packets) format : |
| 383 | * p0 p1 p2 ...... pm |
| 384 | * / \ |
| 385 | * / \ |
| 386 | * / \ |
| 387 | * / \ |
| 388 | * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn |
| 389 | * |
| 390 | * p0 : packet 0 |
| 391 | * p0b0 : packet 0 byte 0 |
| 392 | * |
| 393 | * b0: rx status |
| 394 | * b1: packet length (incl crc) low |
| 395 | * b2: packet length (incl crc) high |
| 396 | * b3..n-4: packet data |
| 397 | * bn-3..bn: ethernet packet crc |
| 398 | */ |
| 399 | if (unlikely(skb->len < SR_RX_OVERHEAD)) { |
| 400 | netdev_err(dev->net, "unexpected tiny rx frame\n"); |
| 401 | return 0; |
| 402 | } |
| 403 | |
| 404 | /* one skb may contains multiple packets */ |
| 405 | while (skb->len > SR_RX_OVERHEAD) { |
| 406 | if (skb->data[0] != 0x40) |
| 407 | return 0; |
| 408 | |
| 409 | /* ignore the CRC length */ |
| 410 | len = (skb->data[1] | (skb->data[2] << 8)) - 4; |
| 411 | |
| 412 | if (len > ETH_FRAME_LEN) |
| 413 | return 0; |
| 414 | |
| 415 | /* the last packet of current skb */ |
| 416 | if (skb->len == (len + SR_RX_OVERHEAD)) { |
| 417 | skb_pull(skb, 3); |
| 418 | skb->len = len; |
| 419 | skb_set_tail_pointer(skb, len); |
| 420 | skb->truesize = len + sizeof(struct sk_buff); |
| 421 | return 2; |
| 422 | } |
| 423 | |
| 424 | /* skb_clone is used for address align */ |
| 425 | sr_skb = skb_clone(skb, GFP_ATOMIC); |
| 426 | if (!sr_skb) |
| 427 | return 0; |
| 428 | |
| 429 | sr_skb->len = len; |
| 430 | sr_skb->data = skb->data + 3; |
| 431 | skb_set_tail_pointer(sr_skb, len); |
| 432 | sr_skb->truesize = len + sizeof(struct sk_buff); |
| 433 | usbnet_skb_return(dev, sr_skb); |
| 434 | |
| 435 | skb_pull(skb, len + SR_RX_OVERHEAD); |
| 436 | }; |
| 437 | |
| 438 | return 0; |
| 439 | } |
| 440 | |
| 441 | static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| 442 | gfp_t flags) |
| 443 | { |
| 444 | int len; |
| 445 | |
| 446 | /* SR9700 can only send out one ethernet packet at once. |
| 447 | * |
| 448 | * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn |
| 449 | * |
| 450 | * b0: rx status |
| 451 | * b1: packet length (incl crc) low |
| 452 | * b2: packet length (incl crc) high |
| 453 | * b3..n-4: packet data |
| 454 | * bn-3..bn: ethernet packet crc |
| 455 | */ |
| 456 | |
| 457 | len = skb->len; |
| 458 | |
| 459 | if (skb_headroom(skb) < SR_TX_OVERHEAD) { |
| 460 | struct sk_buff *skb2; |
| 461 | |
| 462 | skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags); |
| 463 | dev_kfree_skb_any(skb); |
| 464 | skb = skb2; |
| 465 | if (!skb) |
| 466 | return NULL; |
| 467 | } |
| 468 | |
| 469 | __skb_push(skb, SR_TX_OVERHEAD); |
| 470 | |
| 471 | /* usbnet adds padding if length is a multiple of packet size |
| 472 | * if so, adjust length value in header |
| 473 | */ |
| 474 | if ((skb->len % dev->maxpacket) == 0) |
| 475 | len++; |
| 476 | |
| 477 | skb->data[0] = len; |
| 478 | skb->data[1] = len >> 8; |
| 479 | |
| 480 | return skb; |
| 481 | } |
| 482 | |
| 483 | static void sr9700_status(struct usbnet *dev, struct urb *urb) |
| 484 | { |
| 485 | int link; |
| 486 | u8 *buf; |
| 487 | |
| 488 | /* format: |
| 489 | b0: net status |
| 490 | b1: tx status 1 |
| 491 | b2: tx status 2 |
| 492 | b3: rx status |
| 493 | b4: rx overflow |
| 494 | b5: rx count |
| 495 | b6: tx count |
| 496 | b7: gpr |
| 497 | */ |
| 498 | |
| 499 | if (urb->actual_length < 8) |
| 500 | return; |
| 501 | |
| 502 | buf = urb->transfer_buffer; |
| 503 | |
| 504 | link = !!(buf[0] & 0x40); |
| 505 | if (netif_carrier_ok(dev->net) != link) { |
| 506 | usbnet_link_change(dev, link, 1); |
| 507 | netdev_dbg(dev->net, "Link Status is: %d\n", link); |
| 508 | } |
| 509 | } |
| 510 | |
| 511 | static int sr9700_link_reset(struct usbnet *dev) |
| 512 | { |
| 513 | struct ethtool_cmd ecmd; |
| 514 | |
| 515 | mii_check_media(&dev->mii, 1, 1); |
| 516 | mii_ethtool_gset(&dev->mii, &ecmd); |
| 517 | |
| 518 | netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n", |
| 519 | ecmd.speed, ecmd.duplex); |
| 520 | |
| 521 | return 0; |
| 522 | } |
| 523 | |
| 524 | static const struct driver_info sr9700_driver_info = { |
| 525 | .description = "CoreChip SR9700 USB Ethernet", |
| 526 | .flags = FLAG_ETHER, |
| 527 | .bind = sr9700_bind, |
| 528 | .rx_fixup = sr9700_rx_fixup, |
| 529 | .tx_fixup = sr9700_tx_fixup, |
| 530 | .status = sr9700_status, |
| 531 | .link_reset = sr9700_link_reset, |
| 532 | .reset = sr9700_link_reset, |
| 533 | }; |
| 534 | |
| 535 | static const struct usb_device_id products[] = { |
| 536 | { |
| 537 | USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */ |
| 538 | .driver_info = (unsigned long)&sr9700_driver_info, |
| 539 | }, |
| 540 | {}, /* END */ |
| 541 | }; |
| 542 | |
| 543 | MODULE_DEVICE_TABLE(usb, products); |
| 544 | |
| 545 | static struct usb_driver sr9700_usb_driver = { |
| 546 | .name = "sr9700", |
| 547 | .id_table = products, |
| 548 | .probe = usbnet_probe, |
| 549 | .disconnect = usbnet_disconnect, |
| 550 | .suspend = usbnet_suspend, |
| 551 | .resume = usbnet_resume, |
| 552 | .disable_hub_initiated_lpm = 1, |
| 553 | }; |
| 554 | |
| 555 | module_usb_driver(sr9700_usb_driver); |
| 556 | |
| 557 | MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>"); |
| 558 | MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/"); |
| 559 | MODULE_LICENSE("GPL"); |