Oskar Schirmer | b486ddb | 2009-04-02 13:19:07 +0200 | [diff] [blame] | 1 | /* |
| 2 | * drivers/i2c/busses/i2c-s6000.c |
| 3 | * |
| 4 | * Description: Driver for S6000 Family I2C Interface |
| 5 | * Copyright (c) 2008 emlix GmbH |
| 6 | * Author: Oskar Schirmer <os@emlix.com> |
| 7 | * |
| 8 | * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com> |
| 9 | * Copyright (c) 2005-2007 Analog Devices, Inc. |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License as published by |
| 13 | * the Free Software Foundation; either version 2 of the License, or |
| 14 | * (at your option) any later version. |
| 15 | * |
| 16 | * This program is distributed in the hope that it will be useful, |
| 17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 | * GNU General Public License for more details. |
| 20 | * |
| 21 | * You should have received a copy of the GNU General Public License |
| 22 | * along with this program; if not, write to the Free Software |
| 23 | * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA |
| 24 | */ |
| 25 | |
| 26 | #include <linux/clk.h> |
| 27 | #include <linux/err.h> |
| 28 | #include <linux/module.h> |
| 29 | #include <linux/kernel.h> |
| 30 | #include <linux/init.h> |
| 31 | #include <linux/delay.h> |
| 32 | #include <linux/i2c.h> |
| 33 | #include <linux/i2c/s6000.h> |
| 34 | #include <linux/timer.h> |
| 35 | #include <linux/spinlock.h> |
| 36 | #include <linux/completion.h> |
| 37 | #include <linux/interrupt.h> |
| 38 | #include <linux/platform_device.h> |
H Hartley Sweeten | 2178218 | 2010-05-21 18:41:01 +0200 | [diff] [blame] | 39 | #include <linux/io.h> |
Oskar Schirmer | b486ddb | 2009-04-02 13:19:07 +0200 | [diff] [blame] | 40 | |
Oskar Schirmer | b486ddb | 2009-04-02 13:19:07 +0200 | [diff] [blame] | 41 | #include "i2c-s6000.h" |
| 42 | |
| 43 | #define DRV_NAME "i2c-s6000" |
| 44 | |
| 45 | #define POLL_TIMEOUT (2 * HZ) |
| 46 | |
| 47 | struct s6i2c_if { |
| 48 | u8 __iomem *reg; /* memory mapped registers */ |
| 49 | int irq; |
| 50 | spinlock_t lock; |
| 51 | struct i2c_msg *msgs; /* messages currently handled */ |
| 52 | int msgs_num; /* nb of msgs to do */ |
| 53 | int msgs_push; /* nb of msgs read/written */ |
| 54 | int msgs_done; /* nb of msgs finally handled */ |
| 55 | unsigned push; /* nb of bytes read/written in msg */ |
| 56 | unsigned done; /* nb of bytes finally handled */ |
| 57 | int timeout_count; /* timeout retries left */ |
| 58 | struct timer_list timeout_timer; |
| 59 | struct i2c_adapter adap; |
| 60 | struct completion complete; |
| 61 | struct clk *clk; |
| 62 | struct resource *res; |
| 63 | }; |
| 64 | |
| 65 | static inline u16 i2c_rd16(struct s6i2c_if *iface, unsigned n) |
| 66 | { |
| 67 | return readw(iface->reg + (n)); |
| 68 | } |
| 69 | |
| 70 | static inline void i2c_wr16(struct s6i2c_if *iface, unsigned n, u16 v) |
| 71 | { |
| 72 | writew(v, iface->reg + (n)); |
| 73 | } |
| 74 | |
| 75 | static inline u32 i2c_rd32(struct s6i2c_if *iface, unsigned n) |
| 76 | { |
| 77 | return readl(iface->reg + (n)); |
| 78 | } |
| 79 | |
| 80 | static inline void i2c_wr32(struct s6i2c_if *iface, unsigned n, u32 v) |
| 81 | { |
| 82 | writel(v, iface->reg + (n)); |
| 83 | } |
| 84 | |
| 85 | static struct s6i2c_if s6i2c_if; |
| 86 | |
| 87 | static void s6i2c_handle_interrupt(struct s6i2c_if *iface) |
| 88 | { |
| 89 | if (i2c_rd16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) { |
| 90 | i2c_rd16(iface, S6_I2C_CLRTXABRT); |
| 91 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 92 | complete(&iface->complete); |
| 93 | return; |
| 94 | } |
| 95 | if (iface->msgs_done >= iface->msgs_num) { |
| 96 | dev_err(&iface->adap.dev, "s6i2c: spurious I2C irq: %04x\n", |
| 97 | i2c_rd16(iface, S6_I2C_INTRSTAT)); |
| 98 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 99 | return; |
| 100 | } |
| 101 | while ((iface->msgs_push < iface->msgs_num) |
| 102 | && (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) { |
| 103 | struct i2c_msg *m = &iface->msgs[iface->msgs_push]; |
| 104 | if (!(m->flags & I2C_M_RD)) |
| 105 | i2c_wr16(iface, S6_I2C_DATACMD, m->buf[iface->push]); |
| 106 | else |
| 107 | i2c_wr16(iface, S6_I2C_DATACMD, |
| 108 | 1 << S6_I2C_DATACMD_READ); |
| 109 | if (++iface->push >= m->len) { |
| 110 | iface->push = 0; |
| 111 | iface->msgs_push += 1; |
| 112 | } |
| 113 | } |
| 114 | do { |
| 115 | struct i2c_msg *m = &iface->msgs[iface->msgs_done]; |
| 116 | if (!(m->flags & I2C_M_RD)) { |
| 117 | if (iface->msgs_done < iface->msgs_push) |
| 118 | iface->msgs_done += 1; |
| 119 | else |
| 120 | break; |
| 121 | } else if (i2c_rd16(iface, S6_I2C_STATUS) |
| 122 | & (1 << S6_I2C_STATUS_RFNE)) { |
| 123 | m->buf[iface->done] = i2c_rd16(iface, S6_I2C_DATACMD); |
| 124 | if (++iface->done >= m->len) { |
| 125 | iface->done = 0; |
| 126 | iface->msgs_done += 1; |
| 127 | } |
| 128 | } else{ |
| 129 | break; |
| 130 | } |
| 131 | } while (iface->msgs_done < iface->msgs_num); |
| 132 | if (iface->msgs_done >= iface->msgs_num) { |
| 133 | i2c_wr16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT); |
| 134 | complete(&iface->complete); |
| 135 | } else if (iface->msgs_push >= iface->msgs_num) { |
| 136 | i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) | |
| 137 | (1 << S6_I2C_INTR_RXFULL)); |
| 138 | } else { |
| 139 | i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) | |
| 140 | (1 << S6_I2C_INTR_TXEMPTY) | |
| 141 | (1 << S6_I2C_INTR_RXFULL)); |
| 142 | } |
| 143 | } |
| 144 | |
| 145 | static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id) |
| 146 | { |
| 147 | struct s6i2c_if *iface = dev_id; |
| 148 | if (!(i2c_rd16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER) |
| 149 | | (1 << S6_I2C_INTR_RXOVER) |
| 150 | | (1 << S6_I2C_INTR_RXFULL) |
| 151 | | (1 << S6_I2C_INTR_TXOVER) |
| 152 | | (1 << S6_I2C_INTR_TXEMPTY) |
| 153 | | (1 << S6_I2C_INTR_RDREQ) |
| 154 | | (1 << S6_I2C_INTR_TXABRT) |
| 155 | | (1 << S6_I2C_INTR_RXDONE) |
| 156 | | (1 << S6_I2C_INTR_ACTIVITY) |
| 157 | | (1 << S6_I2C_INTR_STOPDET) |
| 158 | | (1 << S6_I2C_INTR_STARTDET) |
| 159 | | (1 << S6_I2C_INTR_GENCALL)))) |
| 160 | return IRQ_NONE; |
| 161 | |
| 162 | spin_lock(&iface->lock); |
| 163 | del_timer(&iface->timeout_timer); |
| 164 | s6i2c_handle_interrupt(iface); |
| 165 | spin_unlock(&iface->lock); |
| 166 | return IRQ_HANDLED; |
| 167 | } |
| 168 | |
| 169 | static void s6i2c_timeout(unsigned long data) |
| 170 | { |
| 171 | struct s6i2c_if *iface = (struct s6i2c_if *)data; |
| 172 | unsigned long flags; |
| 173 | |
| 174 | spin_lock_irqsave(&iface->lock, flags); |
| 175 | s6i2c_handle_interrupt(iface); |
| 176 | if (--iface->timeout_count > 0) { |
| 177 | iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; |
| 178 | add_timer(&iface->timeout_timer); |
| 179 | } else { |
| 180 | complete(&iface->complete); |
| 181 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 182 | } |
| 183 | spin_unlock_irqrestore(&iface->lock, flags); |
| 184 | } |
| 185 | |
| 186 | static int s6i2c_master_xfer(struct i2c_adapter *adap, |
| 187 | struct i2c_msg *msgs, int num) |
| 188 | { |
| 189 | struct s6i2c_if *iface = adap->algo_data; |
| 190 | int i; |
| 191 | if (num == 0) |
| 192 | return 0; |
| 193 | if (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY)) |
| 194 | yield(); |
| 195 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 196 | i2c_rd16(iface, S6_I2C_CLRINTR); |
| 197 | for (i = 0; i < num; i++) { |
| 198 | if (msgs[i].flags & I2C_M_TEN) { |
| 199 | dev_err(&adap->dev, |
| 200 | "s6i2c: 10 bits addr not supported\n"); |
| 201 | return -EINVAL; |
| 202 | } |
| 203 | if (msgs[i].len == 0) { |
| 204 | dev_err(&adap->dev, |
| 205 | "s6i2c: zero length message not supported\n"); |
| 206 | return -EINVAL; |
| 207 | } |
| 208 | if (msgs[i].addr != msgs[0].addr) { |
| 209 | dev_err(&adap->dev, |
| 210 | "s6i2c: multiple xfer cannot change target\n"); |
| 211 | return -EINVAL; |
| 212 | } |
| 213 | } |
| 214 | |
| 215 | iface->msgs = msgs; |
| 216 | iface->msgs_num = num; |
| 217 | iface->msgs_push = 0; |
| 218 | iface->msgs_done = 0; |
| 219 | iface->push = 0; |
| 220 | iface->done = 0; |
| 221 | iface->timeout_count = 10; |
| 222 | i2c_wr16(iface, S6_I2C_TAR, msgs[0].addr); |
| 223 | i2c_wr16(iface, S6_I2C_ENABLE, 1); |
| 224 | i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) | |
| 225 | (1 << S6_I2C_INTR_TXABRT)); |
| 226 | |
| 227 | iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; |
| 228 | add_timer(&iface->timeout_timer); |
| 229 | wait_for_completion(&iface->complete); |
| 230 | del_timer_sync(&iface->timeout_timer); |
| 231 | while (i2c_rd32(iface, S6_I2C_TXFLR) > 0) |
| 232 | schedule(); |
| 233 | while (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY)) |
| 234 | schedule(); |
| 235 | |
| 236 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 237 | i2c_wr16(iface, S6_I2C_ENABLE, 0); |
| 238 | return iface->msgs_done; |
| 239 | } |
| 240 | |
| 241 | static u32 s6i2c_functionality(struct i2c_adapter *adap) |
| 242 | { |
| 243 | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| 244 | } |
| 245 | |
| 246 | static struct i2c_algorithm s6i2c_algorithm = { |
| 247 | .master_xfer = s6i2c_master_xfer, |
| 248 | .functionality = s6i2c_functionality, |
| 249 | }; |
| 250 | |
| 251 | static u16 __devinit nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns) |
| 252 | { |
| 253 | u32 dividend = ((clk_get_rate(iface->clk) / 1000) * ns) / 1000000; |
| 254 | if (dividend > 0xffff) |
| 255 | return 0xffff; |
| 256 | return dividend; |
| 257 | } |
| 258 | |
| 259 | static int __devinit s6i2c_probe(struct platform_device *dev) |
| 260 | { |
| 261 | struct s6i2c_if *iface = &s6i2c_if; |
| 262 | struct i2c_adapter *p_adap; |
| 263 | const char *clock; |
| 264 | int bus_num, rc; |
| 265 | spin_lock_init(&iface->lock); |
| 266 | init_completion(&iface->complete); |
| 267 | iface->irq = platform_get_irq(dev, 0); |
| 268 | if (iface->irq < 0) { |
| 269 | rc = iface->irq; |
| 270 | goto err_out; |
| 271 | } |
| 272 | iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| 273 | if (!iface->res) { |
| 274 | rc = -ENXIO; |
| 275 | goto err_out; |
| 276 | } |
| 277 | iface->res = request_mem_region(iface->res->start, |
| 278 | resource_size(iface->res), |
| 279 | dev->dev.bus_id); |
| 280 | if (!iface->res) { |
| 281 | rc = -EBUSY; |
| 282 | goto err_out; |
| 283 | } |
| 284 | iface->reg = ioremap_nocache(iface->res->start, |
| 285 | resource_size(iface->res)); |
| 286 | if (!iface->reg) { |
| 287 | rc = -ENOMEM; |
| 288 | goto err_reg; |
| 289 | } |
| 290 | |
| 291 | clock = 0; |
| 292 | bus_num = -1; |
| 293 | if (dev->dev.platform_data) { |
| 294 | struct s6_i2c_platform_data *pdata = dev->dev.platform_data; |
| 295 | bus_num = pdata->bus_num; |
| 296 | clock = pdata->clock; |
| 297 | } |
| 298 | iface->clk = clk_get(&dev->dev, clock); |
| 299 | if (IS_ERR(iface->clk)) { |
| 300 | rc = PTR_ERR(iface->clk); |
| 301 | goto err_map; |
| 302 | } |
| 303 | rc = clk_enable(iface->clk); |
| 304 | if (rc < 0) |
| 305 | goto err_clk_put; |
| 306 | init_timer(&iface->timeout_timer); |
| 307 | iface->timeout_timer.function = s6i2c_timeout; |
| 308 | iface->timeout_timer.data = (unsigned long)iface; |
| 309 | |
| 310 | p_adap = &iface->adap; |
| 311 | strlcpy(p_adap->name, dev->name, sizeof(p_adap->name)); |
| 312 | p_adap->algo = &s6i2c_algorithm; |
| 313 | p_adap->algo_data = iface; |
| 314 | p_adap->nr = bus_num; |
| 315 | p_adap->class = 0; |
| 316 | p_adap->dev.parent = &dev->dev; |
| 317 | i2c_wr16(iface, S6_I2C_INTRMASK, 0); |
| 318 | rc = request_irq(iface->irq, s6i2c_interrupt_entry, |
| 319 | IRQF_SHARED, dev->name, iface); |
| 320 | if (rc) { |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 321 | dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq); |
Oskar Schirmer | b486ddb | 2009-04-02 13:19:07 +0200 | [diff] [blame] | 322 | goto err_clk_dis; |
| 323 | } |
| 324 | |
| 325 | i2c_wr16(iface, S6_I2C_ENABLE, 0); |
| 326 | udelay(1); |
| 327 | i2c_wr32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST); |
| 328 | i2c_wr16(iface, S6_I2C_CLRTXABRT, 1); |
| 329 | i2c_wr16(iface, S6_I2C_CON, |
| 330 | (1 << S6_I2C_CON_MASTER) | |
| 331 | (S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) | |
| 332 | (0 << S6_I2C_CON_10BITSLAVE) | |
| 333 | (0 << S6_I2C_CON_10BITMASTER) | |
| 334 | (1 << S6_I2C_CON_RESTARTENA) | |
| 335 | (1 << S6_I2C_CON_SLAVEDISABLE)); |
| 336 | i2c_wr16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000)); |
| 337 | i2c_wr16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700)); |
| 338 | i2c_wr16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600)); |
| 339 | i2c_wr16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300)); |
| 340 | i2c_wr16(iface, S6_I2C_RXTL, 0); |
| 341 | i2c_wr16(iface, S6_I2C_TXTL, 0); |
| 342 | |
| 343 | platform_set_drvdata(dev, iface); |
Grant Likely | 488bf31 | 2011-07-25 17:49:43 +0200 | [diff] [blame] | 344 | rc = i2c_add_numbered_adapter(p_adap); |
Oskar Schirmer | b486ddb | 2009-04-02 13:19:07 +0200 | [diff] [blame] | 345 | if (rc) |
| 346 | goto err_irq_free; |
| 347 | return 0; |
| 348 | |
| 349 | err_irq_free: |
| 350 | free_irq(iface->irq, iface); |
| 351 | err_clk_dis: |
| 352 | clk_disable(iface->clk); |
| 353 | err_clk_put: |
| 354 | clk_put(iface->clk); |
| 355 | err_map: |
| 356 | iounmap(iface->reg); |
| 357 | err_reg: |
| 358 | release_mem_region(iface->res->start, |
| 359 | resource_size(iface->res)); |
| 360 | err_out: |
| 361 | return rc; |
| 362 | } |
| 363 | |
| 364 | static int __devexit s6i2c_remove(struct platform_device *pdev) |
| 365 | { |
| 366 | struct s6i2c_if *iface = platform_get_drvdata(pdev); |
| 367 | i2c_wr16(iface, S6_I2C_ENABLE, 0); |
| 368 | platform_set_drvdata(pdev, NULL); |
| 369 | i2c_del_adapter(&iface->adap); |
| 370 | free_irq(iface->irq, iface); |
| 371 | clk_disable(iface->clk); |
| 372 | clk_put(iface->clk); |
| 373 | iounmap(iface->reg); |
| 374 | release_mem_region(iface->res->start, |
| 375 | resource_size(iface->res)); |
| 376 | return 0; |
| 377 | } |
| 378 | |
| 379 | static struct platform_driver s6i2c_driver = { |
| 380 | .probe = s6i2c_probe, |
| 381 | .remove = __devexit_p(s6i2c_remove), |
| 382 | .driver = { |
| 383 | .name = DRV_NAME, |
| 384 | .owner = THIS_MODULE, |
| 385 | }, |
| 386 | }; |
| 387 | |
| 388 | static int __init s6i2c_init(void) |
| 389 | { |
| 390 | pr_info("I2C: S6000 I2C driver\n"); |
| 391 | return platform_driver_register(&s6i2c_driver); |
| 392 | } |
| 393 | |
| 394 | static void __exit s6i2c_exit(void) |
| 395 | { |
| 396 | platform_driver_unregister(&s6i2c_driver); |
| 397 | } |
| 398 | |
| 399 | MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C"); |
| 400 | MODULE_LICENSE("GPL"); |
| 401 | MODULE_ALIAS("platform:" DRV_NAME); |
| 402 | |
| 403 | subsys_initcall(s6i2c_init); |
| 404 | module_exit(s6i2c_exit); |