drivers/gpu/drm/exynos/exynos5433_drm_decon.c

/* drivers/gpu/drm/exynos5433_drm_decon.c
 *
 * Copyright (C) 2015 Samsung Electronics Co.Ltd
 * Authors:
 *	Joonyoung Shim <jy0922.shim@samsung.com>
 *	Hyungwon Hwang <human.hwang@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundationr
 */

#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>

#include <video/exynos5433_decon.h>

#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
#include "exynos_drm_plane.h"
#include "exynos_drm_iommu.h"

#define WINDOWS_NR	3
#define MIN_FB_WIDTH_FOR_16WORD_BURST	128

struct decon_context {
	struct device			*dev;
	struct drm_device		*drm_dev;
	struct exynos_drm_crtc		*crtc;
	struct exynos_drm_plane		planes[WINDOWS_NR];
	void __iomem			*addr;
	struct clk			*clks[6];
	unsigned int			default_win;
	unsigned long			irq_flags;
	int				pipe;
	bool				suspended;

#define BIT_CLKS_ENABLED		0
#define BIT_IRQS_ENABLED		1
	unsigned long			enabled;
	bool				i80_if;
	atomic_t			win_updated;
};

static const char * const decon_clks_name[] = {
	"aclk_decon",
	"aclk_smmu_decon0x",
	"aclk_xiu_decon0x",
	"pclk_smmu_decon0x",
	"sclk_decon_vclk",
	"sclk_decon_eclk",
};

static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	u32 val;

	if (ctx->suspended)
		return -EPERM;

	if (test_and_set_bit(0, &ctx->irq_flags)) {
		val = VIDINTCON0_INTEN;
		if (ctx->i80_if)
			val |= VIDINTCON0_FRAMEDONE;
		else
			val |= VIDINTCON0_INTFRMEN;

		writel(val, ctx->addr + DECON_VIDINTCON0);
	}

	return 0;
}

static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;

	if (ctx->suspended)
		return;

	if (test_and_clear_bit(0, &ctx->irq_flags))
		writel(0, ctx->addr + DECON_VIDINTCON0);
}

static void decon_setup_trigger(struct decon_context *ctx)
{
	u32 val = TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
			TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN;
	writel(val, ctx->addr + DECON_TRIGCON);
}

static void decon_commit(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	struct drm_display_mode *mode = &crtc->base.mode;
	u32 val;

	if (ctx->suspended)
		return;

	/* enable clock gate */
	val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F;
	writel(val, ctx->addr + DECON_CMU);

	/* lcd on and use command if */
	val = VIDOUT_LCD_ON;
	if (ctx->i80_if)
		val |= VIDOUT_COMMAND_IF;
	else
		val |= VIDOUT_RGB_IF;
	writel(val, ctx->addr + DECON_VIDOUTCON0);

	val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
		VIDTCON2_HOZVAL(mode->hdisplay - 1);
	writel(val, ctx->addr + DECON_VIDTCON2);

	if (!ctx->i80_if) {
		val = VIDTCON00_VBPD_F(
				mode->crtc_vtotal - mode->crtc_vsync_end) |
			VIDTCON00_VFPD_F(
				mode->crtc_vsync_start - mode->crtc_vdisplay);
		writel(val, ctx->addr + DECON_VIDTCON00);

		val = VIDTCON01_VSPW_F(
				mode->crtc_vsync_end - mode->crtc_vsync_start);
		writel(val, ctx->addr + DECON_VIDTCON01);

		val = VIDTCON10_HBPD_F(
				mode->crtc_htotal - mode->crtc_hsync_end) |
			VIDTCON10_HFPD_F(
				mode->crtc_hsync_start - mode->crtc_hdisplay);
		writel(val, ctx->addr + DECON_VIDTCON10);

		val = VIDTCON11_HSPW_F(
				mode->crtc_hsync_end - mode->crtc_hsync_start);
		writel(val, ctx->addr + DECON_VIDTCON11);
	}

	decon_setup_trigger(ctx);

	/* enable output and display signal */
	val = VIDCON0_ENVID | VIDCON0_ENVID_F;
	writel(val, ctx->addr + DECON_VIDCON0);
}

#define COORDINATE_X(x)		(((x) & 0xfff) << 12)
#define COORDINATE_Y(x)		((x) & 0xfff)
#define OFFSIZE(x)		(((x) & 0x3fff) << 14)
#define PAGEWIDTH(x)		((x) & 0x3fff)

static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win)
{
	struct exynos_drm_plane *plane = &ctx->planes[win];
	unsigned long val;

	val = readl(ctx->addr + DECON_WINCONx(win));
	val &= ~WINCONx_BPPMODE_MASK;

	switch (plane->pixel_format) {
	case DRM_FORMAT_XRGB1555:
		val |= WINCONx_BPPMODE_16BPP_I1555;
		val |= WINCONx_HAWSWP_F;
		val |= WINCONx_BURSTLEN_16WORD;
		break;
	case DRM_FORMAT_RGB565:
		val |= WINCONx_BPPMODE_16BPP_565;
		val |= WINCONx_HAWSWP_F;
		val |= WINCONx_BURSTLEN_16WORD;
		break;
	case DRM_FORMAT_XRGB8888:
		val |= WINCONx_BPPMODE_24BPP_888;
		val |= WINCONx_WSWP_F;
		val |= WINCONx_BURSTLEN_16WORD;
		break;
	case DRM_FORMAT_ARGB8888:
		val |= WINCONx_BPPMODE_32BPP_A8888;
		val |= WINCONx_WSWP_F | WINCONx_BLD_PIX_F | WINCONx_ALPHA_SEL_F;
		val |= WINCONx_BURSTLEN_16WORD;
		break;
	default:
		DRM_ERROR("Proper pixel format is not set\n");
		return;
	}

	DRM_DEBUG_KMS("bpp = %u\n", plane->bpp);

	/*
	 * In case of exynos, setting dma-burst to 16Word causes permanent
	 * tearing for very small buffers, e.g. cursor buffer. Burst Mode
	 * switching which is based on plane size is not recommended as
	 * plane size varies a lot towards the end of the screen and rapid
	 * movement causes unstable DMA which results into iommu crash/tear.
	 */

	if (plane->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
		val &= ~WINCONx_BURSTLEN_MASK;
		val |= WINCONx_BURSTLEN_8WORD;
	}

	writel(val, ctx->addr + DECON_WINCONx(win));
}

static void decon_shadow_protect_win(struct decon_context *ctx, int win,
					bool protect)
{
	u32 val;

	val = readl(ctx->addr + DECON_SHADOWCON);

	if (protect)
		val |= SHADOWCON_Wx_PROTECT(win);
	else
		val &= ~SHADOWCON_Wx_PROTECT(win);

	writel(val, ctx->addr + DECON_SHADOWCON);
}

static void decon_update_plane(struct exynos_drm_crtc *crtc,
			       struct exynos_drm_plane *plane)
{
	struct decon_context *ctx = crtc->ctx;
	unsigned int win = plane->zpos;
	u32 val;

	if (ctx->suspended)
		return;

	decon_shadow_protect_win(ctx, win, true);

	val = COORDINATE_X(plane->crtc_x) | COORDINATE_Y(plane->crtc_y);
	writel(val, ctx->addr + DECON_VIDOSDxA(win));

	val = COORDINATE_X(plane->crtc_x + plane->crtc_width - 1) |
		COORDINATE_Y(plane->crtc_y + plane->crtc_height - 1);
	writel(val, ctx->addr + DECON_VIDOSDxB(win));

	val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
		VIDOSD_Wx_ALPHA_B_F(0x0);
	writel(val, ctx->addr + DECON_VIDOSDxC(win));

	val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
		VIDOSD_Wx_ALPHA_B_F(0x0);
	writel(val, ctx->addr + DECON_VIDOSDxD(win));

	writel(plane->dma_addr[0], ctx->addr + DECON_VIDW0xADD0B0(win));

	val = plane->dma_addr[0] + plane->pitch * plane->crtc_height;
	writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));

	val = OFFSIZE(plane->pitch - plane->crtc_width * (plane->bpp >> 3))
		| PAGEWIDTH(plane->crtc_width * (plane->bpp >> 3));
	writel(val, ctx->addr + DECON_VIDW0xADD2(win));

	decon_win_set_pixfmt(ctx, win);

	/* window enable */
	val = readl(ctx->addr + DECON_WINCONx(win));
	val |= WINCONx_ENWIN_F;
	writel(val, ctx->addr + DECON_WINCONx(win));

	decon_shadow_protect_win(ctx, win, false);

	/* standalone update */
	val = readl(ctx->addr + DECON_UPDATE);
	val |= STANDALONE_UPDATE_F;
	writel(val, ctx->addr + DECON_UPDATE);

	if (ctx->i80_if)
		atomic_set(&ctx->win_updated, 1);
}

static void decon_disable_plane(struct exynos_drm_crtc *crtc,
				struct exynos_drm_plane *plane)
{
	struct decon_context *ctx = crtc->ctx;
	unsigned int win = plane->zpos;
	u32 val;

	if (ctx->suspended)
		return;

	decon_shadow_protect_win(ctx, win, true);

	/* window disable */
	val = readl(ctx->addr + DECON_WINCONx(win));
	val &= ~WINCONx_ENWIN_F;
	writel(val, ctx->addr + DECON_WINCONx(win));

	decon_shadow_protect_win(ctx, win, false);

	/* standalone update */
	val = readl(ctx->addr + DECON_UPDATE);
	val |= STANDALONE_UPDATE_F;
	writel(val, ctx->addr + DECON_UPDATE);
}

static void decon_swreset(struct decon_context *ctx)
{
	unsigned int tries;

	writel(0, ctx->addr + DECON_VIDCON0);
	for (tries = 2000; tries; --tries) {
		if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_STOP_STATUS)
			break;
		udelay(10);
	}

	WARN(tries == 0, "failed to disable DECON\n");

	writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0);
	for (tries = 2000; tries; --tries) {
		if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_SWRESET)
			break;
		udelay(10);
	}

	WARN(tries == 0, "failed to software reset DECON\n");
}

static void decon_enable(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	int ret;
	int i;

	if (!ctx->suspended)
		return;

	ctx->suspended = false;

	pm_runtime_get_sync(ctx->dev);

	for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
		ret = clk_prepare_enable(ctx->clks[i]);
		if (ret < 0)
			goto err;
	}

	set_bit(BIT_CLKS_ENABLED, &ctx->enabled);

	/* if vblank was enabled status, enable it again. */
	if (test_and_clear_bit(0, &ctx->irq_flags))
		decon_enable_vblank(ctx->crtc);

	decon_commit(ctx->crtc);

	return;
err:
	while (--i >= 0)
		clk_disable_unprepare(ctx->clks[i]);

	ctx->suspended = true;
}

static void decon_disable(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	int i;

	if (ctx->suspended)
		return;

	/*
	 * We need to make sure that all windows are disabled before we
	 * suspend that connector. Otherwise we might try to scan from
	 * a destroyed buffer later.
	 */
	for (i = 0; i < WINDOWS_NR; i++)
		decon_disable_plane(crtc, &ctx->planes[i]);

	decon_swreset(ctx);

	for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++)
		clk_disable_unprepare(ctx->clks[i]);

	clear_bit(BIT_CLKS_ENABLED, &ctx->enabled);

	pm_runtime_put_sync(ctx->dev);

	ctx->suspended = true;
}

void decon_te_irq_handler(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	u32 val;

	if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
		return;

	if (atomic_add_unless(&ctx->win_updated, -1, 0)) {
		/* trigger */
		val = readl(ctx->addr + DECON_TRIGCON);
		val |= TRIGCON_SWTRIGCMD;
		writel(val, ctx->addr + DECON_TRIGCON);
	}

	drm_crtc_handle_vblank(&ctx->crtc->base);
}

static void decon_clear_channels(struct exynos_drm_crtc *crtc)
{
	struct decon_context *ctx = crtc->ctx;
	int win, i, ret;
	u32 val;

	DRM_DEBUG_KMS("%s\n", __FILE__);

	for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
		ret = clk_prepare_enable(ctx->clks[i]);
		if (ret < 0)
			goto err;
	}

	for (win = 0; win < WINDOWS_NR; win++) {
		/* shadow update disable */
		val = readl(ctx->addr + DECON_SHADOWCON);
		val |= SHADOWCON_Wx_PROTECT(win);
		writel(val, ctx->addr + DECON_SHADOWCON);

		/* window disable */
		val = readl(ctx->addr + DECON_WINCONx(win));
		val &= ~WINCONx_ENWIN_F;
		writel(val, ctx->addr + DECON_WINCONx(win));

		/* shadow update enable */
		val = readl(ctx->addr + DECON_SHADOWCON);
		val &= ~SHADOWCON_Wx_PROTECT(win);
		writel(val, ctx->addr + DECON_SHADOWCON);

		/* standalone update */
		val = readl(ctx->addr + DECON_UPDATE);
		val |= STANDALONE_UPDATE_F;
		writel(val, ctx->addr + DECON_UPDATE);
	}
	/* TODO: wait for possible vsync */
	msleep(50);

err:
	while (--i >= 0)
		clk_disable_unprepare(ctx->clks[i]);
}

static struct exynos_drm_crtc_ops decon_crtc_ops = {
	.enable			= decon_enable,
	.disable		= decon_disable,
	.commit			= decon_commit,
	.enable_vblank		= decon_enable_vblank,
	.disable_vblank		= decon_disable_vblank,
	.commit			= decon_commit,
	.update_plane		= decon_update_plane,
	.disable_plane		= decon_disable_plane,
	.te_handler		= decon_te_irq_handler,
};

static int decon_bind(struct device *dev, struct device *master, void *data)
{
	struct decon_context *ctx = dev_get_drvdata(dev);
	struct drm_device *drm_dev = data;
	struct exynos_drm_private *priv = drm_dev->dev_private;
	struct exynos_drm_plane *exynos_plane;
	enum drm_plane_type type;
	unsigned int zpos;
	int ret;

	ctx->drm_dev = drm_dev;
	ctx->pipe = priv->pipe++;

	for (zpos = 0; zpos < WINDOWS_NR; zpos++) {
		type = (zpos == ctx->default_win) ? DRM_PLANE_TYPE_PRIMARY :
							DRM_PLANE_TYPE_OVERLAY;
		ret = exynos_plane_init(drm_dev, &ctx->planes[zpos],
				1 << ctx->pipe, type, zpos);
		if (ret)
			return ret;
	}

	exynos_plane = &ctx->planes[ctx->default_win];
	ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
					ctx->pipe, EXYNOS_DISPLAY_TYPE_LCD,
					&decon_crtc_ops, ctx);
	if (IS_ERR(ctx->crtc)) {
		ret = PTR_ERR(ctx->crtc);
		goto err;
	}

	decon_clear_channels(ctx->crtc);

	ret = drm_iommu_attach_device(drm_dev, dev);
	if (ret)
		goto err;

	return ret;
err:
	priv->pipe--;
	return ret;
}

static void decon_unbind(struct device *dev, struct device *master, void *data)
{
	struct decon_context *ctx = dev_get_drvdata(dev);

	decon_disable(ctx->crtc);

	/* detach this sub driver from iommu mapping if supported. */
	drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
}

static const struct component_ops decon_component_ops = {
	.bind	= decon_bind,
	.unbind = decon_unbind,
};

static irqreturn_t decon_vsync_irq_handler(int irq, void *dev_id)
{
	struct decon_context *ctx = dev_id;
	u32 val;

	if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
		goto out;

	val = readl(ctx->addr + DECON_VIDINTCON1);
	if (val & VIDINTCON1_INTFRMPEND) {
		drm_crtc_handle_vblank(&ctx->crtc->base);

		/* clear */
		writel(VIDINTCON1_INTFRMPEND, ctx->addr + DECON_VIDINTCON1);
	}

out:
	return IRQ_HANDLED;
}

static irqreturn_t decon_lcd_sys_irq_handler(int irq, void *dev_id)
{
	struct decon_context *ctx = dev_id;
	u32 val;

	if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
		goto out;

	val = readl(ctx->addr + DECON_VIDINTCON1);
	if (val & VIDINTCON1_INTFRMDONEPEND) {
		exynos_drm_crtc_finish_pageflip(ctx->crtc);

		/* clear */
		writel(VIDINTCON1_INTFRMDONEPEND,
				ctx->addr + DECON_VIDINTCON1);
	}

out:
	return IRQ_HANDLED;
}

static int exynos5433_decon_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct decon_context *ctx;
	struct resource *res;
	int ret;
	int i;

	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
	if (!ctx)
		return -ENOMEM;

	ctx->default_win = 0;
	ctx->suspended = true;
	ctx->dev = dev;
	if (of_get_child_by_name(dev->of_node, "i80-if-timings"))
		ctx->i80_if = true;

	for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
		struct clk *clk;

		clk = devm_clk_get(ctx->dev, decon_clks_name[i]);
		if (IS_ERR(clk))
			return PTR_ERR(clk);

		ctx->clks[i] = clk;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(dev, "cannot find IO resource\n");
		return -ENXIO;
	}

	ctx->addr = devm_ioremap_resource(dev, res);
	if (IS_ERR(ctx->addr)) {
		dev_err(dev, "ioremap failed\n");
		return PTR_ERR(ctx->addr);
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
			ctx->i80_if ? "lcd_sys" : "vsync");
	if (!res) {
		dev_err(dev, "cannot find IRQ resource\n");
		return -ENXIO;
	}

	ret = devm_request_irq(dev, res->start, ctx->i80_if ?
			decon_lcd_sys_irq_handler : decon_vsync_irq_handler, 0,
			"drm_decon", ctx);
	if (ret < 0) {
		dev_err(dev, "lcd_sys irq request failed\n");
		return ret;
	}

	platform_set_drvdata(pdev, ctx);

	pm_runtime_enable(dev);

	ret = component_add(dev, &decon_component_ops);
	if (ret)
		goto err_disable_pm_runtime;

	return 0;

err_disable_pm_runtime:
	pm_runtime_disable(dev);

	return ret;
}

static int exynos5433_decon_remove(struct platform_device *pdev)
{
	pm_runtime_disable(&pdev->dev);

	component_del(&pdev->dev, &decon_component_ops);

	return 0;
}

static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
	{ .compatible = "samsung,exynos5433-decon" },
	{},
};
MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);

struct platform_driver exynos5433_decon_driver = {
	.probe		= exynos5433_decon_probe,
	.remove		= exynos5433_decon_remove,
	.driver		= {
		.name	= "exynos5433-decon",
		.of_match_table = exynos5433_decon_driver_dt_match,
	},
};