drivers/media/dvb-frontends/ds3000.c

/*
    Montage Technology DS3000 - DVBS/S2 Demodulator driver
    Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com>

    Copyright (C) 2009-2012 TurboSight.com

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/firmware.h>

#include "dvb_frontend.h"
#include "ts2020.h"
#include "ds3000.h"

static int debug;

#define dprintk(args...) \
	do { \
		if (debug) \
			printk(args); \
	} while (0)

/* as of March 2009 current DS3000 firmware version is 1.78 */
/* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */
#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw"

#define DS3000_SAMPLE_RATE 96000 /* in kHz */

/* Register values to initialise the demod in DVB-S mode */
static u8 ds3000_dvbs_init_tab[] = {
	0x23, 0x05,
	0x08, 0x03,
	0x0c, 0x00,
	0x21, 0x54,
	0x25, 0x82,
	0x27, 0x31,
	0x30, 0x08,
	0x31, 0x40,
	0x32, 0x32,
	0x33, 0x35,
	0x35, 0xff,
	0x3a, 0x00,
	0x37, 0x10,
	0x38, 0x10,
	0x39, 0x02,
	0x42, 0x60,
	0x4a, 0x40,
	0x4b, 0x04,
	0x4d, 0x91,
	0x5d, 0xc8,
	0x50, 0x77,
	0x51, 0x77,
	0x52, 0x36,
	0x53, 0x36,
	0x56, 0x01,
	0x63, 0x43,
	0x64, 0x30,
	0x65, 0x40,
	0x68, 0x26,
	0x69, 0x4c,
	0x70, 0x20,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x40,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x60,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x80,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0xa0,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x1f,
	0x76, 0x00,
	0x77, 0xd1,
	0x78, 0x0c,
	0x79, 0x80,
	0x7f, 0x04,
	0x7c, 0x00,
	0x80, 0x86,
	0x81, 0xa6,
	0x85, 0x04,
	0xcd, 0xf4,
	0x90, 0x33,
	0xa0, 0x44,
	0xc0, 0x18,
	0xc3, 0x10,
	0xc4, 0x08,
	0xc5, 0x80,
	0xc6, 0x80,
	0xc7, 0x0a,
	0xc8, 0x1a,
	0xc9, 0x80,
	0xfe, 0x92,
	0xe0, 0xf8,
	0xe6, 0x8b,
	0xd0, 0x40,
	0xf8, 0x20,
	0xfa, 0x0f,
	0xfd, 0x20,
	0xad, 0x20,
	0xae, 0x07,
	0xb8, 0x00,
};

/* Register values to initialise the demod in DVB-S2 mode */
static u8 ds3000_dvbs2_init_tab[] = {
	0x23, 0x0f,
	0x08, 0x07,
	0x0c, 0x00,
	0x21, 0x54,
	0x25, 0x82,
	0x27, 0x31,
	0x30, 0x08,
	0x31, 0x32,
	0x32, 0x32,
	0x33, 0x35,
	0x35, 0xff,
	0x3a, 0x00,
	0x37, 0x10,
	0x38, 0x10,
	0x39, 0x02,
	0x42, 0x60,
	0x4a, 0x80,
	0x4b, 0x04,
	0x4d, 0x81,
	0x5d, 0x88,
	0x50, 0x36,
	0x51, 0x36,
	0x52, 0x36,
	0x53, 0x36,
	0x63, 0x60,
	0x64, 0x10,
	0x65, 0x10,
	0x68, 0x04,
	0x69, 0x29,
	0x70, 0x20,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x40,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x60,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x80,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0xa0,
	0x71, 0x70,
	0x72, 0x04,
	0x73, 0x00,
	0x70, 0x1f,
	0xa0, 0x44,
	0xc0, 0x08,
	0xc1, 0x10,
	0xc2, 0x08,
	0xc3, 0x10,
	0xc4, 0x08,
	0xc5, 0xf0,
	0xc6, 0xf0,
	0xc7, 0x0a,
	0xc8, 0x1a,
	0xc9, 0x80,
	0xca, 0x23,
	0xcb, 0x24,
	0xce, 0x74,
	0x90, 0x03,
	0x76, 0x80,
	0x77, 0x42,
	0x78, 0x0a,
	0x79, 0x80,
	0xad, 0x40,
	0xae, 0x07,
	0x7f, 0xd4,
	0x7c, 0x00,
	0x80, 0xa8,
	0x81, 0xda,
	0x7c, 0x01,
	0x80, 0xda,
	0x81, 0xec,
	0x7c, 0x02,
	0x80, 0xca,
	0x81, 0xeb,
	0x7c, 0x03,
	0x80, 0xba,
	0x81, 0xdb,
	0x85, 0x08,
	0x86, 0x00,
	0x87, 0x02,
	0x89, 0x80,
	0x8b, 0x44,
	0x8c, 0xaa,
	0x8a, 0x10,
	0xba, 0x00,
	0xf5, 0x04,
	0xfe, 0x44,
	0xd2, 0x32,
	0xb8, 0x00,
};

struct ds3000_state {
	struct i2c_adapter *i2c;
	const struct ds3000_config *config;
	struct dvb_frontend frontend;
	/* previous uncorrected block counter for DVB-S2 */
	u16 prevUCBS2;
};

static int ds3000_writereg(struct ds3000_state *state, int reg, int data)
{
	u8 buf[] = { reg, data };
	struct i2c_msg msg = { .addr = state->config->demod_address,
		.flags = 0, .buf = buf, .len = 2 };
	int err;

	dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);

	err = i2c_transfer(state->i2c, &msg, 1);
	if (err != 1) {
		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
			 " value == 0x%02x)\n", __func__, err, reg, data);
		return -EREMOTEIO;
	}

	return 0;
}

static int ds3000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
	struct ds3000_state *state = fe->demodulator_priv;

	if (enable)
		ds3000_writereg(state, 0x03, 0x12);
	else
		ds3000_writereg(state, 0x03, 0x02);

	return 0;
}

/* I2C write for 8k firmware load */
static int ds3000_writeFW(struct ds3000_state *state, int reg,
				const u8 *data, u16 len)
{
	int i, ret = 0;
	struct i2c_msg msg;
	u8 *buf;

	buf = kmalloc(33, GFP_KERNEL);
	if (buf == NULL) {
		printk(KERN_ERR "Unable to kmalloc\n");
		return -ENOMEM;
	}

	*(buf) = reg;

	msg.addr = state->config->demod_address;
	msg.flags = 0;
	msg.buf = buf;
	msg.len = 33;

	for (i = 0; i < len; i += 32) {
		memcpy(buf + 1, data + i, 32);

		dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len);

		ret = i2c_transfer(state->i2c, &msg, 1);
		if (ret != 1) {
			printk(KERN_ERR "%s: write error(err == %i, "
				"reg == 0x%02x\n", __func__, ret, reg);
			ret = -EREMOTEIO;
			goto error;
		}
	}
	ret = 0;

error:
	kfree(buf);

	return ret;
}

static int ds3000_readreg(struct ds3000_state *state, u8 reg)
{
	int ret;
	u8 b0[] = { reg };
	u8 b1[] = { 0 };
	struct i2c_msg msg[] = {
		{
			.addr = state->config->demod_address,
			.flags = 0,
			.buf = b0,
			.len = 1
		}, {
			.addr = state->config->demod_address,
			.flags = I2C_M_RD,
			.buf = b1,
			.len = 1
		}
	};

	ret = i2c_transfer(state->i2c, msg, 2);

	if (ret != 2) {
		printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
		return ret;
	}

	dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);

	return b1[0];
}

static int ds3000_load_firmware(struct dvb_frontend *fe,
					const struct firmware *fw);

static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
{
	struct ds3000_state *state = fe->demodulator_priv;
	const struct firmware *fw;
	int ret = 0;

	dprintk("%s()\n", __func__);

	ret = ds3000_readreg(state, 0xb2);
	if (ret < 0)
		return ret;

	/* Load firmware */
	/* request the firmware, this will block until someone uploads it */
	printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
				DS3000_DEFAULT_FIRMWARE);
	ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE,
				state->i2c->dev.parent);
	printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
	if (ret) {
		printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
				"found?)\n", __func__);
		return ret;
	}

	ret = ds3000_load_firmware(fe, fw);
	if (ret)
		printk("%s: Writing firmware to device failed\n", __func__);

	release_firmware(fw);

	dprintk("%s: Firmware upload %s\n", __func__,
			ret == 0 ? "complete" : "failed");

	return ret;
}

static int ds3000_load_firmware(struct dvb_frontend *fe,
					const struct firmware *fw)
{
	struct ds3000_state *state = fe->demodulator_priv;
	int ret = 0;

	dprintk("%s\n", __func__);
	dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
			fw->size,
			fw->data[0],
			fw->data[1],
			fw->data[fw->size - 2],
			fw->data[fw->size - 1]);

	/* Begin the firmware load process */
	ds3000_writereg(state, 0xb2, 0x01);
	/* write the entire firmware */
	ret = ds3000_writeFW(state, 0xb0, fw->data, fw->size);
	ds3000_writereg(state, 0xb2, 0x00);

	return ret;
}

static int ds3000_set_voltage(struct dvb_frontend *fe,
			      enum fe_sec_voltage voltage)
{
	struct ds3000_state *state = fe->demodulator_priv;
	u8 data;

	dprintk("%s(%d)\n", __func__, voltage);

	data = ds3000_readreg(state, 0xa2);
	data |= 0x03; /* bit0 V/H, bit1 off/on */

	switch (voltage) {
	case SEC_VOLTAGE_18:
		data &= ~0x03;
		break;
	case SEC_VOLTAGE_13:
		data &= ~0x03;
		data |= 0x01;
		break;
	case SEC_VOLTAGE_OFF:
		break;
	}

	ds3000_writereg(state, 0xa2, data);

	return 0;
}

static int ds3000_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
	struct ds3000_state *state = fe->demodulator_priv;
	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
	int lock;

	*status = 0;

	switch (c->delivery_system) {
	case SYS_DVBS:
		lock = ds3000_readreg(state, 0xd1);
		if ((lock & 0x07) == 0x07)
			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
				FE_HAS_VITERBI | FE_HAS_SYNC |
				FE_HAS_LOCK;

		break;
	case SYS_DVBS2:
		lock = ds3000_readreg(state, 0x0d);
		if ((lock & 0x8f) == 0x8f)
			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
				FE_HAS_VITERBI | FE_HAS_SYNC |
				FE_HAS_LOCK;

		break;
	default:
		return -EINVAL;
	}

	if (state->config->set_lock_led)
		state->config->set_lock_led(fe, *status == 0 ? 0 : 1);

	dprintk("%s: status = 0x%02x\n", __func__, lock);

	return 0;
}

/* read DS3000 BER value */
static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber)
{
	struct ds3000_state *state = fe->demodulator_priv;
	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
	u8 data;
	u32 ber_reading, lpdc_frames;

	dprintk("%s()\n", __func__);

	switch (c->delivery_system) {
	case SYS_DVBS:
		/* set the number of bytes checked during
		BER estimation */
		ds3000_writereg(state, 0xf9, 0x04);
		/* read BER estimation status */
		data = ds3000_readreg(state, 0xf8);
		/* check if BER estimation is ready */
		if ((data & 0x10) == 0) {
			/* this is the number of error bits,
			to calculate the bit error rate
			divide to 8388608 */
			*ber = (ds3000_readreg(state, 0xf7) << 8) |
				ds3000_readreg(state, 0xf6);
			/* start counting error bits */
			/* need to be set twice
			otherwise it fails sometimes */
			data |= 0x10;
			ds3000_writereg(state, 0xf8, data);
			ds3000_writereg(state, 0xf8, data);
		} else
			/* used to indicate that BER estimation
			is not ready, i.e. BER is unknown */
			*ber = 0xffffffff;
		break;
	case SYS_DVBS2:
		/* read the number of LPDC decoded frames */
		lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) |
				(ds3000_readreg(state, 0xd6) << 8) |
				ds3000_readreg(state, 0xd5);
		/* read the number of packets with bad CRC */
		ber_reading = (ds3000_readreg(state, 0xf8) << 8) |
				ds3000_readreg(state, 0xf7);
		if (lpdc_frames > 750) {
			/* clear LPDC frame counters */
			ds3000_writereg(state, 0xd1, 0x01);
			/* clear bad packets counter */
			ds3000_writereg(state, 0xf9, 0x01);
			/* enable bad packets counter */
			ds3000_writereg(state, 0xf9, 0x00);
			/* enable LPDC frame counters */
			ds3000_writereg(state, 0xd1, 0x00);
			*ber = ber_reading;
		} else
			/* used to indicate that BER estimation is not ready,
			i.e. BER is unknown */
			*ber = 0xffffffff;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ds3000_read_signal_strength(struct dvb_frontend *fe,
						u16 *signal_strength)
{
	if (fe->ops.tuner_ops.get_rf_strength)
		fe->ops.tuner_ops.get_rf_strength(fe, signal_strength);

	return 0;
}

/* calculate DS3000 snr value in dB */
static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr)
{
	struct ds3000_state *state = fe->demodulator_priv;
	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
	u8 snr_reading, snr_value;
	u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp;
	static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */
		0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03,
		0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717,
		0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505
	};
	static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */
		0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103,
		0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5,
		0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6,
		0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888,
		0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51,
		0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68,
		0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206,
		0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a,
		0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649,
		0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813,
		0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1,
		0x49e9, 0x4a20, 0x4a57
	};

	dprintk("%s()\n", __func__);

	switch (c->delivery_system) {
	case SYS_DVBS:
		snr_reading = ds3000_readreg(state, 0xff);
		snr_reading /= 8;
		if (snr_reading == 0)
			*snr = 0x0000;
		else {
			if (snr_reading > 20)
				snr_reading = 20;
			snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026;
			/* cook the value to be suitable for szap-s2
			human readable output */
			*snr = snr_value * 8 * 655;
		}
		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
				snr_reading, *snr);
		break;
	case SYS_DVBS2:
		dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) +
				(ds3000_readreg(state, 0x8d) << 4);
		dvbs2_signal_reading = ds3000_readreg(state, 0x8e);
		tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1;
		if (tmp == 0) {
			*snr = 0x0000;
			return 0;
		}
		if (dvbs2_noise_reading == 0) {
			snr_value = 0x0013;
			/* cook the value to be suitable for szap-s2
			human readable output */
			*snr = 0xffff;
			return 0;
		}
		if (tmp > dvbs2_noise_reading) {
			snr_reading = tmp / dvbs2_noise_reading;
			if (snr_reading > 80)
				snr_reading = 80;
			snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000;
			/* cook the value to be suitable for szap-s2
			human readable output */
			*snr = snr_value * 5 * 655;
		} else {
			snr_reading = dvbs2_noise_reading / tmp;
			if (snr_reading > 80)
				snr_reading = 80;
			*snr = -(dvbs2_snr_tab[snr_reading - 1] / 1000);
		}
		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
				snr_reading, *snr);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

/* read DS3000 uncorrected blocks */
static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
	struct ds3000_state *state = fe->demodulator_priv;
	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
	u8 data;
	u16 _ucblocks;

	dprintk("%s()\n", __func__);

	switch (c->delivery_system) {
	case SYS_DVBS:
		*ucblocks = (ds3000_readreg(state, 0xf5) << 8) |
				ds3000_readreg(state, 0xf4);
		data = ds3000_readreg(state, 0xf8);
		/* clear packet counters */
		data &= ~0x20;
		ds3000_writereg(state, 0xf8, data);
		/* enable packet counters */
		data |= 0x20;
		ds3000_writereg(state, 0xf8, data);
		break;
	case SYS_DVBS2:
		_ucblocks = (ds3000_readreg(state, 0xe2) << 8) |
				ds3000_readreg(state, 0xe1);
		if (_ucblocks > state->prevUCBS2)
			*ucblocks = _ucblocks - state->prevUCBS2;
		else
			*ucblocks = state->prevUCBS2 - _ucblocks;
		state->prevUCBS2 = _ucblocks;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ds3000_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone)
{
	struct ds3000_state *state = fe->demodulator_priv;
	u8 data;

	dprintk("%s(%d)\n", __func__, tone);
	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
		printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
		return -EINVAL;
	}

	data = ds3000_readreg(state, 0xa2);
	data &= ~0xc0;
	ds3000_writereg(state, 0xa2, data);

	switch (tone) {
	case SEC_TONE_ON:
		dprintk("%s: setting tone on\n", __func__);
		data = ds3000_readreg(state, 0xa1);
		data &= ~0x43;
		data |= 0x04;
		ds3000_writereg(state, 0xa1, data);
		break;
	case SEC_TONE_OFF:
		dprintk("%s: setting tone off\n", __func__);
		data = ds3000_readreg(state, 0xa2);
		data |= 0x80;
		ds3000_writereg(state, 0xa2, data);
		break;
	}

	return 0;
}

static int ds3000_send_diseqc_msg(struct dvb_frontend *fe,
				struct dvb_diseqc_master_cmd *d)
{
	struct ds3000_state *state = fe->demodulator_priv;
	int i;
	u8 data;

	/* Dump DiSEqC message */
	dprintk("%s(", __func__);
	for (i = 0 ; i < d->msg_len;) {
		dprintk("0x%02x", d->msg[i]);
		if (++i < d->msg_len)
			dprintk(", ");
	}

	/* enable DiSEqC message send pin */
	data = ds3000_readreg(state, 0xa2);
	data &= ~0xc0;
	ds3000_writereg(state, 0xa2, data);

	/* DiSEqC message */
	for (i = 0; i < d->msg_len; i++)
		ds3000_writereg(state, 0xa3 + i, d->msg[i]);

	data = ds3000_readreg(state, 0xa1);
	/* clear DiSEqC message length and status,
	enable DiSEqC message send */
	data &= ~0xf8;
	/* set DiSEqC mode, modulation active during 33 pulses,
	set DiSEqC message length */
	data |= ((d->msg_len - 1) << 3) | 0x07;
	ds3000_writereg(state, 0xa1, data);

	/* wait up to 150ms for DiSEqC transmission to complete */
	for (i = 0; i < 15; i++) {
		data = ds3000_readreg(state, 0xa1);
		if ((data & 0x40) == 0)
			break;
		msleep(10);
	}

	/* DiSEqC timeout after 150ms */
	if (i == 15) {
		data = ds3000_readreg(state, 0xa1);
		data &= ~0x80;
		data |= 0x40;
		ds3000_writereg(state, 0xa1, data);

		data = ds3000_readreg(state, 0xa2);
		data &= ~0xc0;
		data |= 0x80;
		ds3000_writereg(state, 0xa2, data);

		return -ETIMEDOUT;
	}

	data = ds3000_readreg(state, 0xa2);
	data &= ~0xc0;
	data |= 0x80;
	ds3000_writereg(state, 0xa2, data);

	return 0;
}

/* Send DiSEqC burst */
static int ds3000_diseqc_send_burst(struct dvb_frontend *fe,
				    enum fe_sec_mini_cmd burst)
{
	struct ds3000_state *state = fe->demodulator_priv;
	int i;
	u8 data;

	dprintk("%s()\n", __func__);

	data = ds3000_readreg(state, 0xa2);
	data &= ~0xc0;
	ds3000_writereg(state, 0xa2, data);

	/* DiSEqC burst */
	if (burst == SEC_MINI_A)
		/* Unmodulated tone burst */
		ds3000_writereg(state, 0xa1, 0x02);
	else if (burst == SEC_MINI_B)
		/* Modulated tone burst */
		ds3000_writereg(state, 0xa1, 0x01);
	else
		return -EINVAL;

	msleep(13);
	for (i = 0; i < 5; i++) {
		data = ds3000_readreg(state, 0xa1);
		if ((data & 0x40) == 0)
			break;
		msleep(1);
	}

	if (i == 5) {
		data = ds3000_readreg(state, 0xa1);
		data &= ~0x80;
		data |= 0x40;
		ds3000_writereg(state, 0xa1, data);

		data = ds3000_readreg(state, 0xa2);
		data &= ~0xc0;
		data |= 0x80;
		ds3000_writereg(state, 0xa2, data);

		return -ETIMEDOUT;
	}

	data = ds3000_readreg(state, 0xa2);
	data &= ~0xc0;
	data |= 0x80;
	ds3000_writereg(state, 0xa2, data);

	return 0;
}

static void ds3000_release(struct dvb_frontend *fe)
{
	struct ds3000_state *state = fe->demodulator_priv;

	if (state->config->set_lock_led)
		state->config->set_lock_led(fe, 0);

	dprintk("%s\n", __func__);
	kfree(state);
}

static struct dvb_frontend_ops ds3000_ops;

struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
				    struct i2c_adapter *i2c)
{
	struct ds3000_state *state = NULL;
	int ret;

	dprintk("%s\n", __func__);

	/* allocate memory for the internal state */
	state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL);
	if (state == NULL) {
		printk(KERN_ERR "Unable to kmalloc\n");
		goto error2;
	}

	state->config = config;
	state->i2c = i2c;
	state->prevUCBS2 = 0;

	/* check if the demod is present */
	ret = ds3000_readreg(state, 0x00) & 0xfe;
	if (ret != 0xe0) {
		printk(KERN_ERR "Invalid probe, probably not a DS3000\n");
		goto error3;
	}

	printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n",
			ds3000_readreg(state, 0x02),
			ds3000_readreg(state, 0x01));

	memcpy(&state->frontend.ops, &ds3000_ops,
			sizeof(struct dvb_frontend_ops));
	state->frontend.demodulator_priv = state;

	/*
	 * Some devices like T480 starts with voltage on. Be sure
	 * to turn voltage off during init, as this can otherwise
	 * interfere with Unicable SCR systems.
	 */
	ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
	return &state->frontend;

error3:
	kfree(state);
error2:
	return NULL;
}
EXPORT_SYMBOL(ds3000_attach);

static int ds3000_set_carrier_offset(struct dvb_frontend *fe,
					s32 carrier_offset_khz)
{
	struct ds3000_state *state = fe->demodulator_priv;
	s32 tmp;

	tmp = carrier_offset_khz;
	tmp *= 65536;
	tmp = (2 * tmp + DS3000_SAMPLE_RATE) / (2 * DS3000_SAMPLE_RATE);

	if (tmp < 0)
		tmp += 65536;

	ds3000_writereg(state, 0x5f, tmp >> 8);
	ds3000_writereg(state, 0x5e, tmp & 0xff);

	return 0;
}

static int ds3000_set_frontend(struct dvb_frontend *fe)
{
	struct ds3000_state *state = fe->demodulator_priv;
	struct dtv_frontend_properties *c = &fe->dtv_property_cache;

	int i;
	enum fe_status status;
	s32 offset_khz;
	u32 frequency;
	u16 value;

	dprintk("%s() ", __func__);

	if (state->config->set_ts_params)
		state->config->set_ts_params(fe, 0);
	/* Tune */
	if (fe->ops.tuner_ops.set_params)
		fe->ops.tuner_ops.set_params(fe);

	/* ds3000 global reset */
	ds3000_writereg(state, 0x07, 0x80);
	ds3000_writereg(state, 0x07, 0x00);
	/* ds3000 build-in uC reset */
	ds3000_writereg(state, 0xb2, 0x01);
	/* ds3000 software reset */
	ds3000_writereg(state, 0x00, 0x01);

	switch (c->delivery_system) {
	case SYS_DVBS:
		/* initialise the demod in DVB-S mode */
		for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2)
			ds3000_writereg(state,
				ds3000_dvbs_init_tab[i],
				ds3000_dvbs_init_tab[i + 1]);
		value = ds3000_readreg(state, 0xfe);
		value &= 0xc0;
		value |= 0x1b;
		ds3000_writereg(state, 0xfe, value);
		break;
	case SYS_DVBS2:
		/* initialise the demod in DVB-S2 mode */
		for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2)
			ds3000_writereg(state,
				ds3000_dvbs2_init_tab[i],
				ds3000_dvbs2_init_tab[i + 1]);
		if (c->symbol_rate >= 30000000)
			ds3000_writereg(state, 0xfe, 0x54);
		else
			ds3000_writereg(state, 0xfe, 0x98);
		break;
	default:
		return -EINVAL;
	}

	/* enable 27MHz clock output */
	ds3000_writereg(state, 0x29, 0x80);
	/* enable ac coupling */
	ds3000_writereg(state, 0x25, 0x8a);

	if ((c->symbol_rate < ds3000_ops.info.symbol_rate_min) ||
			(c->symbol_rate > ds3000_ops.info.symbol_rate_max)) {
		dprintk("%s() symbol_rate %u out of range (%u ... %u)\n",
				__func__, c->symbol_rate,
				ds3000_ops.info.symbol_rate_min,
				ds3000_ops.info.symbol_rate_max);
		return -EINVAL;
	}

	/* enhance symbol rate performance */
	if ((c->symbol_rate / 1000) <= 5000) {
		value = 29777 / (c->symbol_rate / 1000) + 1;
		if (value % 2 != 0)
			value++;
		ds3000_writereg(state, 0xc3, 0x0d);
		ds3000_writereg(state, 0xc8, value);
		ds3000_writereg(state, 0xc4, 0x10);
		ds3000_writereg(state, 0xc7, 0x0e);
	} else if ((c->symbol_rate / 1000) <= 10000) {
		value = 92166 / (c->symbol_rate / 1000) + 1;
		if (value % 2 != 0)
			value++;
		ds3000_writereg(state, 0xc3, 0x07);
		ds3000_writereg(state, 0xc8, value);
		ds3000_writereg(state, 0xc4, 0x09);
		ds3000_writereg(state, 0xc7, 0x12);
	} else if ((c->symbol_rate / 1000) <= 20000) {
		value = 64516 / (c->symbol_rate / 1000) + 1;
		ds3000_writereg(state, 0xc3, value);
		ds3000_writereg(state, 0xc8, 0x0e);
		ds3000_writereg(state, 0xc4, 0x07);
		ds3000_writereg(state, 0xc7, 0x18);
	} else {
		value = 129032 / (c->symbol_rate / 1000) + 1;
		ds3000_writereg(state, 0xc3, value);
		ds3000_writereg(state, 0xc8, 0x0a);
		ds3000_writereg(state, 0xc4, 0x05);
		ds3000_writereg(state, 0xc7, 0x24);
	}

	/* normalized symbol rate rounded to the closest integer */
	value = (((c->symbol_rate / 1000) << 16) +
			(DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE;
	ds3000_writereg(state, 0x61, value & 0x00ff);
	ds3000_writereg(state, 0x62, (value & 0xff00) >> 8);

	/* co-channel interference cancellation disabled */
	ds3000_writereg(state, 0x56, 0x00);

	/* equalizer disabled */
	ds3000_writereg(state, 0x76, 0x00);

	/*ds3000_writereg(state, 0x08, 0x03);
	ds3000_writereg(state, 0xfd, 0x22);
	ds3000_writereg(state, 0x08, 0x07);
	ds3000_writereg(state, 0xfd, 0x42);
	ds3000_writereg(state, 0x08, 0x07);*/

	if (state->config->ci_mode) {
		switch (c->delivery_system) {
		case SYS_DVBS:
		default:
			ds3000_writereg(state, 0xfd, 0x80);
		break;
		case SYS_DVBS2:
			ds3000_writereg(state, 0xfd, 0x01);
			break;
		}
	}

	/* ds3000 out of software reset */
	ds3000_writereg(state, 0x00, 0x00);
	/* start ds3000 build-in uC */
	ds3000_writereg(state, 0xb2, 0x00);

	if (fe->ops.tuner_ops.get_frequency) {
		fe->ops.tuner_ops.get_frequency(fe, &frequency);
		offset_khz = frequency - c->frequency;
		ds3000_set_carrier_offset(fe, offset_khz);
	}

	for (i = 0; i < 30 ; i++) {
		ds3000_read_status(fe, &status);
		if (status & FE_HAS_LOCK)
			break;

		msleep(10);
	}

	return 0;
}

static int ds3000_tune(struct dvb_frontend *fe,
			bool re_tune,
			unsigned int mode_flags,
			unsigned int *delay,
			enum fe_status *status)
{
	if (re_tune) {
		int ret = ds3000_set_frontend(fe);
		if (ret)
			return ret;
	}

	*delay = HZ / 5;

	return ds3000_read_status(fe, status);
}

static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe)
{
	struct ds3000_state *state = fe->demodulator_priv;

	if (state->config->set_lock_led)
		state->config->set_lock_led(fe, 0);

	dprintk("%s()\n", __func__);
	return DVBFE_ALGO_HW;
}

/*
 * Initialise or wake up device
 *
 * Power config will reset and load initial firmware if required
 */
static int ds3000_initfe(struct dvb_frontend *fe)
{
	struct ds3000_state *state = fe->demodulator_priv;
	int ret;

	dprintk("%s()\n", __func__);
	/* hard reset */
	ds3000_writereg(state, 0x08, 0x01 | ds3000_readreg(state, 0x08));
	msleep(1);

	/* Load the firmware if required */
	ret = ds3000_firmware_ondemand(fe);
	if (ret != 0) {
		printk(KERN_ERR "%s: Unable initialize firmware\n", __func__);
		return ret;
	}

	return 0;
}

static struct dvb_frontend_ops ds3000_ops = {
	.delsys = { SYS_DVBS, SYS_DVBS2 },
	.info = {
		.name = "Montage Technology DS3000",
		.frequency_min = 950000,
		.frequency_max = 2150000,
		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
		.frequency_tolerance = 5000,
		.symbol_rate_min = 1000000,
		.symbol_rate_max = 45000000,
		.caps = FE_CAN_INVERSION_AUTO |
			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
			FE_CAN_2G_MODULATION |
			FE_CAN_QPSK | FE_CAN_RECOVER
	},

	.release = ds3000_release,

	.init = ds3000_initfe,
	.i2c_gate_ctrl = ds3000_i2c_gate_ctrl,
	.read_status = ds3000_read_status,
	.read_ber = ds3000_read_ber,
	.read_signal_strength = ds3000_read_signal_strength,
	.read_snr = ds3000_read_snr,
	.read_ucblocks = ds3000_read_ucblocks,
	.set_voltage = ds3000_set_voltage,
	.set_tone = ds3000_set_tone,
	.diseqc_send_master_cmd = ds3000_send_diseqc_msg,
	.diseqc_send_burst = ds3000_diseqc_send_burst,
	.get_frontend_algo = ds3000_get_algo,

	.set_frontend = ds3000_set_frontend,
	.tune = ds3000_tune,
};

module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");

MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
			"DS3000 hardware");
MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE);