| Tony Lindgren | 5992234 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "omap36xx.dtsi" |
| 11 | #include "omap3-evm-common.dtsi" |
| 12 | |
| 13 | |
| 14 | / { |
| 15 | model = "TI OMAP37XX EVM (TMDSEVM3730)"; |
| 16 | compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; |
| 17 | |
| 18 | memory { |
| 19 | device_type = "memory"; |
| 20 | reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 21 | }; |
| 22 | |
| 23 | wl12xx_vmmc: wl12xx_vmmc { |
| 24 | pinctrl-names = "default"; |
| 25 | pinctrl-0 = <&wl12xx_gpio>; |
| 26 | }; |
| 27 | }; |
| 28 | |
| 29 | &omap3_pmx_core { |
| 30 | mmc1_pins: pinmux_mmc1_pins { |
| 31 | pinctrl-single,pins = < |
| 32 | 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 33 | 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 34 | 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 35 | 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 36 | 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 37 | 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 38 | 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ |
| 39 | 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ |
| 40 | 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ |
| 41 | 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ |
| 42 | >; |
| 43 | }; |
| 44 | |
| 45 | /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ |
| 46 | mmc2_pins: pinmux_mmc2_pins { |
| 47 | pinctrl-single,pins = < |
| 48 | 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ |
| 49 | 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ |
| 50 | 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ |
| 51 | 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ |
| 52 | 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ |
| 53 | 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ |
| 54 | >; |
| 55 | }; |
| 56 | |
| 57 | uart3_pins: pinmux_uart3_pins { |
| 58 | pinctrl-single,pins = < |
| 59 | 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| 60 | 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| 61 | >; |
| 62 | }; |
| 63 | |
| 64 | wl12xx_gpio: pinmux_wl12xx_gpio { |
| 65 | pinctrl-single,pins = < |
| 66 | 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ |
| 67 | 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ |
| 68 | >; |
| 69 | }; |
| 70 | |
| 71 | smsc911x_pins: pinmux_smsc911x_pins { |
| 72 | pinctrl-single,pins = < |
| 73 | 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ |
| 74 | >; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | &mmc1 { |
| 79 | pinctrl-names = "default"; |
| 80 | pinctrl-0 = <&mmc1_pins>; |
| 81 | }; |
| 82 | |
| 83 | &mmc2 { |
| 84 | pinctrl-names = "default"; |
| 85 | pinctrl-0 = <&mmc2_pins>; |
| 86 | }; |
| 87 | |
| 88 | &mmc3 { |
| 89 | status = "disabled"; |
| 90 | }; |
| 91 | |
| Tony Lindgren | 31f0820 | 2014-05-05 17:27:39 -0700 | [diff] [blame^] | 92 | &uart1 { |
| 93 | interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; |
| 94 | }; |
| 95 | |
| 96 | &uart2 { |
| 97 | interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; |
| 98 | }; |
| 99 | |
| Tony Lindgren | 5992234 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 100 | &uart3 { |
| Tony Lindgren | 31f0820 | 2014-05-05 17:27:39 -0700 | [diff] [blame^] | 101 | interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
| Tony Lindgren | 5992234 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 102 | pinctrl-names = "default"; |
| 103 | pinctrl-0 = <&uart3_pins>; |
| 104 | }; |
| 105 | |
| 106 | &gpmc { |
| 107 | ranges = <0 0 0x00000000 0x20000000>, |
| 108 | <5 0 0x2c000000 0x01000000>; |
| 109 | |
| 110 | nand@0,0 { |
| 111 | linux,mtd-name= "hynix,h8kds0un0mer-4em"; |
| 112 | reg = <0 0 0>; |
| 113 | nand-bus-width = <16>; |
| 114 | ti,nand-ecc-opt = "bch8"; |
| 115 | |
| 116 | gpmc,sync-clk-ps = <0>; |
| 117 | gpmc,cs-on-ns = <0>; |
| 118 | gpmc,cs-rd-off-ns = <44>; |
| 119 | gpmc,cs-wr-off-ns = <44>; |
| 120 | gpmc,adv-on-ns = <6>; |
| 121 | gpmc,adv-rd-off-ns = <34>; |
| 122 | gpmc,adv-wr-off-ns = <44>; |
| 123 | gpmc,we-off-ns = <40>; |
| 124 | gpmc,oe-off-ns = <54>; |
| 125 | gpmc,access-ns = <64>; |
| 126 | gpmc,rd-cycle-ns = <82>; |
| 127 | gpmc,wr-cycle-ns = <82>; |
| 128 | gpmc,wr-access-ns = <40>; |
| 129 | gpmc,wr-data-mux-bus-ns = <0>; |
| 130 | |
| 131 | #address-cells = <1>; |
| 132 | #size-cells = <1>; |
| 133 | |
| 134 | partition@0 { |
| 135 | label = "X-Loader"; |
| 136 | reg = <0 0x80000>; |
| 137 | }; |
| 138 | partition@0x80000 { |
| 139 | label = "U-Boot"; |
| 140 | reg = <0x80000 0x1c0000>; |
| 141 | }; |
| 142 | partition@0x1c0000 { |
| 143 | label = "Environment"; |
| 144 | reg = <0x240000 0x40000>; |
| 145 | }; |
| 146 | partition@0x280000 { |
| 147 | label = "Kernel"; |
| 148 | reg = <0x280000 0x500000>; |
| 149 | }; |
| 150 | partition@0x780000 { |
| 151 | label = "Filesystem"; |
| 152 | reg = <0x780000 0x1f880000>; |
| 153 | }; |
| 154 | }; |
| 155 | |
| 156 | ethernet@gpmc { |
| 157 | pinctrl-names = "default"; |
| 158 | pinctrl-0 = <&smsc911x_pins>; |
| 159 | }; |
| 160 | }; |