blob: e5b6310240fe6b7e19a8bc216fdde2bc6a06dd67 [file] [log] [blame]
Philippe CORNUc1c026d2017-07-17 09:40:23 +02001/*
2 * Copyright (C) STMicroelectronics SA 2017
3 *
4 * Authors: Philippe Cornu <philippe.cornu@st.com>
5 * Yannick Fertre <yannick.fertre@st.com>
6 *
7 * License terms: GNU General Public License (GPL), version 2
8 */
9
10#include <linux/clk.h>
11#include <linux/iopoll.h>
12#include <linux/module.h>
13#include <drm/drmP.h>
14#include <drm/drm_mipi_dsi.h>
15#include <drm/bridge/dw_mipi_dsi.h>
16#include <video/mipi_display.h>
17
18/* DSI wrapper register & bit definitions */
19/* Note: registers are named as in the Reference Manual */
20#define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */
21#define WCFGR_DSIM BIT(0) /* DSI Mode */
22#define WCFGR_COLMUX GENMASK(3, 1) /* COLor MUltipleXing */
23
24#define DSI_WCR 0x0404 /* Wrapper Control Reg */
25#define WCR_DSIEN BIT(3) /* DSI ENable */
26
27#define DSI_WISR 0x040C /* Wrapper Interrupt and Status Reg */
28#define WISR_PLLLS BIT(8) /* PLL Lock Status */
29#define WISR_RRS BIT(12) /* Regulator Ready Status */
30
31#define DSI_WPCR0 0x0418 /* Wrapper Phy Conf Reg 0 */
32#define WPCR0_UIX4 GENMASK(5, 0) /* Unit Interval X 4 */
33#define WPCR0_TDDL BIT(16) /* Turn Disable Data Lanes */
34
35#define DSI_WRPCR 0x0430 /* Wrapper Regulator & Pll Ctrl Reg */
36#define WRPCR_PLLEN BIT(0) /* PLL ENable */
37#define WRPCR_NDIV GENMASK(8, 2) /* pll loop DIVision Factor */
38#define WRPCR_IDF GENMASK(14, 11) /* pll Input Division Factor */
39#define WRPCR_ODF GENMASK(17, 16) /* pll Output Division Factor */
40#define WRPCR_REGEN BIT(24) /* REGulator ENable */
41#define WRPCR_BGREN BIT(28) /* BandGap Reference ENable */
42#define IDF_MIN 1
43#define IDF_MAX 7
44#define NDIV_MIN 10
45#define NDIV_MAX 125
46#define ODF_MIN 1
47#define ODF_MAX 8
48
49/* dsi color format coding according to the datasheet */
50enum dsi_color {
51 DSI_RGB565_CONF1,
52 DSI_RGB565_CONF2,
53 DSI_RGB565_CONF3,
54 DSI_RGB666_CONF1,
55 DSI_RGB666_CONF2,
56 DSI_RGB888,
57};
58
59#define LANE_MIN_KBPS 31250
60#define LANE_MAX_KBPS 500000
61
62/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
63#define SLEEP_US 1000
64#define TIMEOUT_US 200000
65
66struct dw_mipi_dsi_stm {
67 void __iomem *base;
68 struct clk *pllref_clk;
69};
70
71static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
72{
73 writel(val, dsi->base + reg);
74}
75
76static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
77{
78 return readl(dsi->base + reg);
79}
80
81static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
82{
83 dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
84}
85
86static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
87{
88 dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
89}
90
91static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
92 u32 mask, u32 val)
93{
94 dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
95}
96
97static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
98{
99 switch (fmt) {
100 case MIPI_DSI_FMT_RGB888:
101 return DSI_RGB888;
102 case MIPI_DSI_FMT_RGB666:
103 return DSI_RGB666_CONF2;
104 case MIPI_DSI_FMT_RGB666_PACKED:
105 return DSI_RGB666_CONF1;
106 case MIPI_DSI_FMT_RGB565:
107 return DSI_RGB565_CONF1;
108 default:
109 DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
110 }
111 return DSI_RGB888;
112}
113
114static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
115{
Arnd Bergmann3ff558e2017-09-06 15:13:07 +0200116 int divisor = idf * odf;
Philippe CORNUc1c026d2017-07-17 09:40:23 +0200117
Arnd Bergmann3ff558e2017-09-06 15:13:07 +0200118 /* prevent from division by 0 */
119 if (!divisor)
120 return 0;
121
122 return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
Philippe CORNUc1c026d2017-07-17 09:40:23 +0200123}
124
125static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
126 int *idf, int *ndiv, int *odf)
127{
128 int i, o, n, n_min, n_max;
129 int fvco_min, fvco_max, delta, best_delta; /* all in khz */
130
131 /* Early checks preventing division by 0 & odd results */
132 if ((clkin_khz <= 0) || (clkout_khz <= 0))
133 return -EINVAL;
134
135 fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
136 fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
137
138 best_delta = 1000000; /* big started value (1000000khz) */
139
140 for (i = IDF_MIN; i <= IDF_MAX; i++) {
141 /* Compute ndiv range according to Fvco */
142 n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
143 n_max = (fvco_max * i) / (2 * clkin_khz);
144
145 /* No need to continue idf loop if we reach ndiv max */
146 if (n_min >= NDIV_MAX)
147 break;
148
149 /* Clamp ndiv to valid values */
150 if (n_min < NDIV_MIN)
151 n_min = NDIV_MIN;
152 if (n_max > NDIV_MAX)
153 n_max = NDIV_MAX;
154
155 for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
156 n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
157 /* Check ndiv according to vco range */
158 if ((n < n_min) || (n > n_max))
159 continue;
160 /* Check if new delta is better & saves parameters */
161 delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
162 clkout_khz;
163 if (delta < 0)
164 delta = -delta;
165 if (delta < best_delta) {
166 *idf = i;
167 *ndiv = n;
168 *odf = o;
169 best_delta = delta;
170 }
171 /* fast return in case of "perfect result" */
172 if (!delta)
173 return 0;
174 }
175 }
176
177 return 0;
178}
179
180static int dw_mipi_dsi_phy_init(void *priv_data)
181{
182 struct dw_mipi_dsi_stm *dsi = priv_data;
183 u32 val;
184 int ret;
185
186 /* Enable the regulator */
187 dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
188 ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
189 SLEEP_US, TIMEOUT_US);
190 if (ret)
191 DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
192
193 /* Enable the DSI PLL & wait for its lock */
194 dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
195 ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
196 SLEEP_US, TIMEOUT_US);
197 if (ret)
198 DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
199
200 /* Enable the DSI wrapper */
201 dsi_set(dsi, DSI_WCR, WCR_DSIEN);
202
203 return 0;
204}
205
206static int
207dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
208 unsigned long mode_flags, u32 lanes, u32 format,
209 unsigned int *lane_mbps)
210{
211 struct dw_mipi_dsi_stm *dsi = priv_data;
212 unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
213 int ret, bpp;
214 u32 val;
215
216 pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
217
218 /* Compute requested pll out */
219 bpp = mipi_dsi_pixel_format_to_bpp(format);
220 pll_out_khz = mode->clock * bpp / lanes;
221 /* Add 20% to pll out to be higher than pixel bw (burst mode only) */
222 pll_out_khz = (pll_out_khz * 12) / 10;
223 if (pll_out_khz > LANE_MAX_KBPS) {
224 pll_out_khz = LANE_MAX_KBPS;
225 DRM_WARN("Warning max phy mbps is used\n");
226 }
227 if (pll_out_khz < LANE_MIN_KBPS) {
228 pll_out_khz = LANE_MIN_KBPS;
229 DRM_WARN("Warning min phy mbps is used\n");
230 }
231
232 /* Compute best pll parameters */
233 idf = 0;
234 ndiv = 0;
235 odf = 0;
236 ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
237 if (ret)
238 DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
239
240 /* Get the adjusted pll out value */
241 pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
242
243 /* Set the PLL division factors */
244 dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
245 (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
246
247 /* Compute uix4 & set the bit period in high-speed mode */
248 val = 4000000 / pll_out_khz;
249 dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
250
251 /* Select video mode by resetting DSIM bit */
252 dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
253
254 /* Select the color coding */
255 dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
256 dsi_color_from_mipi(format) << 1);
257
258 *lane_mbps = pll_out_khz / 1000;
259
260 DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
261 pll_in_khz, pll_out_khz, *lane_mbps);
262
263 return 0;
264}
265
Philippe CORNU89a15e62017-07-20 14:05:57 +0200266static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
Philippe CORNUc1c026d2017-07-17 09:40:23 +0200267 .init = dw_mipi_dsi_phy_init,
268 .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
269};
270
271static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
272 .max_data_lanes = 2,
273 .phy_ops = &dw_mipi_dsi_stm_phy_ops,
274};
275
276static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
277 { .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, },
278 { },
279};
280MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
281
282static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
283{
284 struct device *dev = &pdev->dev;
285 struct dw_mipi_dsi_stm *dsi;
286 struct resource *res;
287 int ret;
288
289 dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
290 if (!dsi)
291 return -ENOMEM;
292
293 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
294 if (!res) {
295 DRM_ERROR("Unable to get resource\n");
296 return -ENODEV;
297 }
298
299 dsi->base = devm_ioremap_resource(dev, res);
300 if (IS_ERR(dsi->base)) {
301 DRM_ERROR("Unable to get dsi registers\n");
302 return PTR_ERR(dsi->base);
303 }
304
305 dsi->pllref_clk = devm_clk_get(dev, "ref");
306 if (IS_ERR(dsi->pllref_clk)) {
307 ret = PTR_ERR(dsi->pllref_clk);
308 dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
309 return ret;
310 }
311
312 ret = clk_prepare_enable(dsi->pllref_clk);
313 if (ret) {
314 dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
315 return ret;
316 }
317
318 dw_mipi_dsi_stm_plat_data.base = dsi->base;
319 dw_mipi_dsi_stm_plat_data.priv_data = dsi;
320
321 ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
322 if (ret) {
323 DRM_ERROR("Failed to initialize mipi dsi host\n");
324 clk_disable_unprepare(dsi->pllref_clk);
325 }
326
327 return ret;
328}
329
330static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
331{
332 struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
333
334 clk_disable_unprepare(dsi->pllref_clk);
335 dw_mipi_dsi_remove(pdev);
336
337 return 0;
338}
339
340static struct platform_driver dw_mipi_dsi_stm_driver = {
341 .probe = dw_mipi_dsi_stm_probe,
342 .remove = dw_mipi_dsi_stm_remove,
343 .driver = {
344 .of_match_table = dw_mipi_dsi_stm_dt_ids,
345 .name = "dw_mipi_dsi-stm",
346 },
347};
348
349module_platform_driver(dw_mipi_dsi_stm_driver);
350
351MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
352MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
353MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
354MODULE_LICENSE("GPL v2");