Christian Lamparter | 4c8a32f | 2009-06-23 10:36:26 -0500 | [diff] [blame^] | 1 | /* |
| 2 | * EEPROM parser code for mac80211 Prism54 drivers |
| 3 | * |
| 4 | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| 5 | * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> |
| 6 | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| 7 | * |
| 8 | * Based on: |
| 9 | * - the islsm (softmac prism54) driver, which is: |
| 10 | * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| 11 | * - stlc45xx driver |
| 12 | * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). |
| 13 | * |
| 14 | * This program is free software; you can redistribute it and/or modify |
| 15 | * it under the terms of the GNU General Public License version 2 as |
| 16 | * published by the Free Software Foundation. |
| 17 | */ |
| 18 | |
| 19 | #include <linux/init.h> |
| 20 | #include <linux/firmware.h> |
| 21 | #include <linux/etherdevice.h> |
| 22 | |
| 23 | #include <net/mac80211.h> |
| 24 | |
| 25 | #include "p54.h" |
| 26 | #include "eeprom.h" |
| 27 | #include "lmac.h" |
| 28 | |
| 29 | static struct ieee80211_rate p54_bgrates[] = { |
| 30 | { .bitrate = 10, .hw_value = 0, }, |
| 31 | { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 32 | { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 33 | { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 34 | { .bitrate = 60, .hw_value = 4, }, |
| 35 | { .bitrate = 90, .hw_value = 5, }, |
| 36 | { .bitrate = 120, .hw_value = 6, }, |
| 37 | { .bitrate = 180, .hw_value = 7, }, |
| 38 | { .bitrate = 240, .hw_value = 8, }, |
| 39 | { .bitrate = 360, .hw_value = 9, }, |
| 40 | { .bitrate = 480, .hw_value = 10, }, |
| 41 | { .bitrate = 540, .hw_value = 11, }, |
| 42 | }; |
| 43 | |
| 44 | static struct ieee80211_channel p54_bgchannels[] = { |
| 45 | { .center_freq = 2412, .hw_value = 1, }, |
| 46 | { .center_freq = 2417, .hw_value = 2, }, |
| 47 | { .center_freq = 2422, .hw_value = 3, }, |
| 48 | { .center_freq = 2427, .hw_value = 4, }, |
| 49 | { .center_freq = 2432, .hw_value = 5, }, |
| 50 | { .center_freq = 2437, .hw_value = 6, }, |
| 51 | { .center_freq = 2442, .hw_value = 7, }, |
| 52 | { .center_freq = 2447, .hw_value = 8, }, |
| 53 | { .center_freq = 2452, .hw_value = 9, }, |
| 54 | { .center_freq = 2457, .hw_value = 10, }, |
| 55 | { .center_freq = 2462, .hw_value = 11, }, |
| 56 | { .center_freq = 2467, .hw_value = 12, }, |
| 57 | { .center_freq = 2472, .hw_value = 13, }, |
| 58 | { .center_freq = 2484, .hw_value = 14, }, |
| 59 | }; |
| 60 | |
| 61 | static struct ieee80211_supported_band band_2GHz = { |
| 62 | .channels = p54_bgchannels, |
| 63 | .n_channels = ARRAY_SIZE(p54_bgchannels), |
| 64 | .bitrates = p54_bgrates, |
| 65 | .n_bitrates = ARRAY_SIZE(p54_bgrates), |
| 66 | }; |
| 67 | |
| 68 | static struct ieee80211_rate p54_arates[] = { |
| 69 | { .bitrate = 60, .hw_value = 4, }, |
| 70 | { .bitrate = 90, .hw_value = 5, }, |
| 71 | { .bitrate = 120, .hw_value = 6, }, |
| 72 | { .bitrate = 180, .hw_value = 7, }, |
| 73 | { .bitrate = 240, .hw_value = 8, }, |
| 74 | { .bitrate = 360, .hw_value = 9, }, |
| 75 | { .bitrate = 480, .hw_value = 10, }, |
| 76 | { .bitrate = 540, .hw_value = 11, }, |
| 77 | }; |
| 78 | |
| 79 | static struct ieee80211_channel p54_achannels[] = { |
| 80 | { .center_freq = 4920 }, |
| 81 | { .center_freq = 4940 }, |
| 82 | { .center_freq = 4960 }, |
| 83 | { .center_freq = 4980 }, |
| 84 | { .center_freq = 5040 }, |
| 85 | { .center_freq = 5060 }, |
| 86 | { .center_freq = 5080 }, |
| 87 | { .center_freq = 5170 }, |
| 88 | { .center_freq = 5180 }, |
| 89 | { .center_freq = 5190 }, |
| 90 | { .center_freq = 5200 }, |
| 91 | { .center_freq = 5210 }, |
| 92 | { .center_freq = 5220 }, |
| 93 | { .center_freq = 5230 }, |
| 94 | { .center_freq = 5240 }, |
| 95 | { .center_freq = 5260 }, |
| 96 | { .center_freq = 5280 }, |
| 97 | { .center_freq = 5300 }, |
| 98 | { .center_freq = 5320 }, |
| 99 | { .center_freq = 5500 }, |
| 100 | { .center_freq = 5520 }, |
| 101 | { .center_freq = 5540 }, |
| 102 | { .center_freq = 5560 }, |
| 103 | { .center_freq = 5580 }, |
| 104 | { .center_freq = 5600 }, |
| 105 | { .center_freq = 5620 }, |
| 106 | { .center_freq = 5640 }, |
| 107 | { .center_freq = 5660 }, |
| 108 | { .center_freq = 5680 }, |
| 109 | { .center_freq = 5700 }, |
| 110 | { .center_freq = 5745 }, |
| 111 | { .center_freq = 5765 }, |
| 112 | { .center_freq = 5785 }, |
| 113 | { .center_freq = 5805 }, |
| 114 | { .center_freq = 5825 }, |
| 115 | }; |
| 116 | |
| 117 | static struct ieee80211_supported_band band_5GHz = { |
| 118 | .channels = p54_achannels, |
| 119 | .n_channels = ARRAY_SIZE(p54_achannels), |
| 120 | .bitrates = p54_arates, |
| 121 | .n_bitrates = ARRAY_SIZE(p54_arates), |
| 122 | }; |
| 123 | |
| 124 | static int p54_convert_rev0(struct ieee80211_hw *dev, |
| 125 | struct pda_pa_curve_data *curve_data) |
| 126 | { |
| 127 | struct p54_common *priv = dev->priv; |
| 128 | struct p54_pa_curve_data_sample *dst; |
| 129 | struct pda_pa_curve_data_sample_rev0 *src; |
| 130 | size_t cd_len = sizeof(*curve_data) + |
| 131 | (curve_data->points_per_channel*sizeof(*dst) + 2) * |
| 132 | curve_data->channels; |
| 133 | unsigned int i, j; |
| 134 | void *source, *target; |
| 135 | |
| 136 | priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len, |
| 137 | GFP_KERNEL); |
| 138 | if (!priv->curve_data) |
| 139 | return -ENOMEM; |
| 140 | |
| 141 | priv->curve_data->entries = curve_data->channels; |
| 142 | priv->curve_data->entry_size = sizeof(__le16) + |
| 143 | sizeof(*dst) * curve_data->points_per_channel; |
| 144 | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); |
| 145 | priv->curve_data->len = cd_len; |
| 146 | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); |
| 147 | source = curve_data->data; |
| 148 | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; |
| 149 | for (i = 0; i < curve_data->channels; i++) { |
| 150 | __le16 *freq = source; |
| 151 | source += sizeof(__le16); |
| 152 | *((__le16 *)target) = *freq; |
| 153 | target += sizeof(__le16); |
| 154 | for (j = 0; j < curve_data->points_per_channel; j++) { |
| 155 | dst = target; |
| 156 | src = source; |
| 157 | |
| 158 | dst->rf_power = src->rf_power; |
| 159 | dst->pa_detector = src->pa_detector; |
| 160 | dst->data_64qam = src->pcv; |
| 161 | /* "invent" the points for the other modulations */ |
| 162 | #define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y)) |
| 163 | dst->data_16qam = SUB(src->pcv, 12); |
| 164 | dst->data_qpsk = SUB(dst->data_16qam, 12); |
| 165 | dst->data_bpsk = SUB(dst->data_qpsk, 12); |
| 166 | dst->data_barker = SUB(dst->data_bpsk, 14); |
| 167 | #undef SUB |
| 168 | target += sizeof(*dst); |
| 169 | source += sizeof(*src); |
| 170 | } |
| 171 | } |
| 172 | |
| 173 | return 0; |
| 174 | } |
| 175 | |
| 176 | static int p54_convert_rev1(struct ieee80211_hw *dev, |
| 177 | struct pda_pa_curve_data *curve_data) |
| 178 | { |
| 179 | struct p54_common *priv = dev->priv; |
| 180 | struct p54_pa_curve_data_sample *dst; |
| 181 | struct pda_pa_curve_data_sample_rev1 *src; |
| 182 | size_t cd_len = sizeof(*curve_data) + |
| 183 | (curve_data->points_per_channel*sizeof(*dst) + 2) * |
| 184 | curve_data->channels; |
| 185 | unsigned int i, j; |
| 186 | void *source, *target; |
| 187 | |
| 188 | priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data), |
| 189 | GFP_KERNEL); |
| 190 | if (!priv->curve_data) |
| 191 | return -ENOMEM; |
| 192 | |
| 193 | priv->curve_data->entries = curve_data->channels; |
| 194 | priv->curve_data->entry_size = sizeof(__le16) + |
| 195 | sizeof(*dst) * curve_data->points_per_channel; |
| 196 | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); |
| 197 | priv->curve_data->len = cd_len; |
| 198 | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); |
| 199 | source = curve_data->data; |
| 200 | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; |
| 201 | for (i = 0; i < curve_data->channels; i++) { |
| 202 | __le16 *freq = source; |
| 203 | source += sizeof(__le16); |
| 204 | *((__le16 *)target) = *freq; |
| 205 | target += sizeof(__le16); |
| 206 | for (j = 0; j < curve_data->points_per_channel; j++) { |
| 207 | memcpy(target, source, sizeof(*src)); |
| 208 | |
| 209 | target += sizeof(*dst); |
| 210 | source += sizeof(*src); |
| 211 | } |
| 212 | source++; |
| 213 | } |
| 214 | |
| 215 | return 0; |
| 216 | } |
| 217 | |
| 218 | static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2", |
| 219 | "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" }; |
| 220 | |
| 221 | static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len, |
| 222 | u16 type) |
| 223 | { |
| 224 | struct p54_common *priv = dev->priv; |
| 225 | int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0; |
| 226 | int entry_size = sizeof(struct pda_rssi_cal_entry) + offset; |
| 227 | int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2; |
| 228 | int i; |
| 229 | |
| 230 | if (len != (entry_size * num_entries)) { |
| 231 | printk(KERN_ERR "%s: unknown rssi calibration data packing " |
| 232 | " type:(%x) len:%d.\n", |
| 233 | wiphy_name(dev->wiphy), type, len); |
| 234 | |
| 235 | print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, |
| 236 | data, len); |
| 237 | |
| 238 | printk(KERN_ERR "%s: please report this issue.\n", |
| 239 | wiphy_name(dev->wiphy)); |
| 240 | return; |
| 241 | } |
| 242 | |
| 243 | for (i = 0; i < num_entries; i++) { |
| 244 | struct pda_rssi_cal_entry *cal = data + |
| 245 | (offset + i * entry_size); |
| 246 | priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul); |
| 247 | priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add); |
| 248 | } |
| 249 | } |
| 250 | |
| 251 | static void p54_parse_default_country(struct ieee80211_hw *dev, |
| 252 | void *data, int len) |
| 253 | { |
| 254 | struct pda_country *country; |
| 255 | |
| 256 | if (len != sizeof(*country)) { |
| 257 | printk(KERN_ERR "%s: found possible invalid default country " |
| 258 | "eeprom entry. (entry size: %d)\n", |
| 259 | wiphy_name(dev->wiphy), len); |
| 260 | |
| 261 | print_hex_dump_bytes("country:", DUMP_PREFIX_NONE, |
| 262 | data, len); |
| 263 | |
| 264 | printk(KERN_ERR "%s: please report this issue.\n", |
| 265 | wiphy_name(dev->wiphy)); |
| 266 | return; |
| 267 | } |
| 268 | |
| 269 | country = (struct pda_country *) data; |
| 270 | if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO) |
| 271 | regulatory_hint(dev->wiphy, country->alpha2); |
| 272 | else { |
| 273 | /* TODO: |
| 274 | * write a shared/common function that converts |
| 275 | * "Regulatory domain codes" (802.11-2007 14.8.2.2) |
| 276 | * into ISO/IEC 3166-1 alpha2 for regulatory_hint. |
| 277 | */ |
| 278 | } |
| 279 | } |
| 280 | |
| 281 | static int p54_convert_output_limits(struct ieee80211_hw *dev, |
| 282 | u8 *data, size_t len) |
| 283 | { |
| 284 | struct p54_common *priv = dev->priv; |
| 285 | |
| 286 | if (len < 2) |
| 287 | return -EINVAL; |
| 288 | |
| 289 | if (data[0] != 0) { |
| 290 | printk(KERN_ERR "%s: unknown output power db revision:%x\n", |
| 291 | wiphy_name(dev->wiphy), data[0]); |
| 292 | return -EINVAL; |
| 293 | } |
| 294 | |
| 295 | if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len) |
| 296 | return -EINVAL; |
| 297 | |
| 298 | priv->output_limit = kmalloc(data[1] * |
| 299 | sizeof(struct pda_channel_output_limit) + |
| 300 | sizeof(*priv->output_limit), GFP_KERNEL); |
| 301 | |
| 302 | if (!priv->output_limit) |
| 303 | return -ENOMEM; |
| 304 | |
| 305 | priv->output_limit->offset = 0; |
| 306 | priv->output_limit->entries = data[1]; |
| 307 | priv->output_limit->entry_size = |
| 308 | sizeof(struct pda_channel_output_limit); |
| 309 | priv->output_limit->len = priv->output_limit->entry_size * |
| 310 | priv->output_limit->entries + |
| 311 | priv->output_limit->offset; |
| 312 | |
| 313 | memcpy(priv->output_limit->data, &data[2], |
| 314 | data[1] * sizeof(struct pda_channel_output_limit)); |
| 315 | |
| 316 | return 0; |
| 317 | } |
| 318 | |
| 319 | static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src, |
| 320 | size_t total_len) |
| 321 | { |
| 322 | struct p54_cal_database *dst; |
| 323 | size_t payload_len, entries, entry_size, offset; |
| 324 | |
| 325 | payload_len = le16_to_cpu(src->len); |
| 326 | entries = le16_to_cpu(src->entries); |
| 327 | entry_size = le16_to_cpu(src->entry_size); |
| 328 | offset = le16_to_cpu(src->offset); |
| 329 | if (((entries * entry_size + offset) != payload_len) || |
| 330 | (payload_len + sizeof(*src) != total_len)) |
| 331 | return NULL; |
| 332 | |
| 333 | dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL); |
| 334 | if (!dst) |
| 335 | return NULL; |
| 336 | |
| 337 | dst->entries = entries; |
| 338 | dst->entry_size = entry_size; |
| 339 | dst->offset = offset; |
| 340 | dst->len = payload_len; |
| 341 | |
| 342 | memcpy(dst->data, src->data, payload_len); |
| 343 | return dst; |
| 344 | } |
| 345 | |
| 346 | int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) |
| 347 | { |
| 348 | struct p54_common *priv = dev->priv; |
| 349 | struct eeprom_pda_wrap *wrap = NULL; |
| 350 | struct pda_entry *entry; |
| 351 | unsigned int data_len, entry_len; |
| 352 | void *tmp; |
| 353 | int err; |
| 354 | u8 *end = (u8 *)eeprom + len; |
| 355 | u16 synth = 0; |
| 356 | |
| 357 | wrap = (struct eeprom_pda_wrap *) eeprom; |
| 358 | entry = (void *)wrap->data + le16_to_cpu(wrap->len); |
| 359 | |
| 360 | /* verify that at least the entry length/code fits */ |
| 361 | while ((u8 *)entry <= end - sizeof(*entry)) { |
| 362 | entry_len = le16_to_cpu(entry->len); |
| 363 | data_len = ((entry_len - 1) << 1); |
| 364 | |
| 365 | /* abort if entry exceeds whole structure */ |
| 366 | if ((u8 *)entry + sizeof(*entry) + data_len > end) |
| 367 | break; |
| 368 | |
| 369 | switch (le16_to_cpu(entry->code)) { |
| 370 | case PDR_MAC_ADDRESS: |
| 371 | if (data_len != ETH_ALEN) |
| 372 | break; |
| 373 | SET_IEEE80211_PERM_ADDR(dev, entry->data); |
| 374 | break; |
| 375 | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: |
| 376 | if (priv->output_limit) |
| 377 | break; |
| 378 | err = p54_convert_output_limits(dev, entry->data, |
| 379 | data_len); |
| 380 | if (err) |
| 381 | goto err; |
| 382 | break; |
| 383 | case PDR_PRISM_PA_CAL_CURVE_DATA: { |
| 384 | struct pda_pa_curve_data *curve_data = |
| 385 | (struct pda_pa_curve_data *)entry->data; |
| 386 | if (data_len < sizeof(*curve_data)) { |
| 387 | err = -EINVAL; |
| 388 | goto err; |
| 389 | } |
| 390 | |
| 391 | switch (curve_data->cal_method_rev) { |
| 392 | case 0: |
| 393 | err = p54_convert_rev0(dev, curve_data); |
| 394 | break; |
| 395 | case 1: |
| 396 | err = p54_convert_rev1(dev, curve_data); |
| 397 | break; |
| 398 | default: |
| 399 | printk(KERN_ERR "%s: unknown curve data " |
| 400 | "revision %d\n", |
| 401 | wiphy_name(dev->wiphy), |
| 402 | curve_data->cal_method_rev); |
| 403 | err = -ENODEV; |
| 404 | break; |
| 405 | } |
| 406 | if (err) |
| 407 | goto err; |
| 408 | } |
| 409 | break; |
| 410 | case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: |
| 411 | priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); |
| 412 | if (!priv->iq_autocal) { |
| 413 | err = -ENOMEM; |
| 414 | goto err; |
| 415 | } |
| 416 | |
| 417 | memcpy(priv->iq_autocal, entry->data, data_len); |
| 418 | priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); |
| 419 | break; |
| 420 | case PDR_DEFAULT_COUNTRY: |
| 421 | p54_parse_default_country(dev, entry->data, data_len); |
| 422 | break; |
| 423 | case PDR_INTERFACE_LIST: |
| 424 | tmp = entry->data; |
| 425 | while ((u8 *)tmp < entry->data + data_len) { |
| 426 | struct exp_if *exp_if = tmp; |
| 427 | if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000)) |
| 428 | synth = le16_to_cpu(exp_if->variant); |
| 429 | tmp += sizeof(*exp_if); |
| 430 | } |
| 431 | break; |
| 432 | case PDR_HARDWARE_PLATFORM_COMPONENT_ID: |
| 433 | if (data_len < 2) |
| 434 | break; |
| 435 | priv->version = *(u8 *)(entry->data + 1); |
| 436 | break; |
| 437 | case PDR_RSSI_LINEAR_APPROXIMATION: |
| 438 | case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND: |
| 439 | case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED: |
| 440 | p54_parse_rssical(dev, entry->data, data_len, |
| 441 | le16_to_cpu(entry->code)); |
| 442 | break; |
| 443 | case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: { |
| 444 | __le16 *src = (void *) entry->data; |
| 445 | s16 *dst = (void *) &priv->rssical_db; |
| 446 | int i; |
| 447 | |
| 448 | if (data_len != sizeof(priv->rssical_db)) { |
| 449 | err = -EINVAL; |
| 450 | goto err; |
| 451 | } |
| 452 | for (i = 0; i < sizeof(priv->rssical_db) / |
| 453 | sizeof(*src); i++) |
| 454 | *(dst++) = (s16) le16_to_cpu(*(src++)); |
| 455 | } |
| 456 | break; |
| 457 | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: { |
| 458 | struct pda_custom_wrapper *pda = (void *) entry->data; |
| 459 | if (priv->output_limit || data_len < sizeof(*pda)) |
| 460 | break; |
| 461 | priv->output_limit = p54_convert_db(pda, data_len); |
| 462 | } |
| 463 | break; |
| 464 | case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: { |
| 465 | struct pda_custom_wrapper *pda = (void *) entry->data; |
| 466 | if (priv->curve_data || data_len < sizeof(*pda)) |
| 467 | break; |
| 468 | priv->curve_data = p54_convert_db(pda, data_len); |
| 469 | } |
| 470 | break; |
| 471 | case PDR_END: |
| 472 | /* make it overrun */ |
| 473 | entry_len = len; |
| 474 | break; |
| 475 | default: |
| 476 | break; |
| 477 | } |
| 478 | |
| 479 | entry = (void *)entry + (entry_len + 1)*2; |
| 480 | } |
| 481 | |
| 482 | if (!synth || !priv->iq_autocal || !priv->output_limit || |
| 483 | !priv->curve_data) { |
| 484 | printk(KERN_ERR "%s: not all required entries found in eeprom!\n", |
| 485 | wiphy_name(dev->wiphy)); |
| 486 | err = -EINVAL; |
| 487 | goto err; |
| 488 | } |
| 489 | |
| 490 | priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK; |
| 491 | if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW) |
| 492 | p54_init_xbow_synth(priv); |
| 493 | if (!(synth & PDR_SYNTH_24_GHZ_DISABLED)) |
| 494 | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; |
| 495 | if (!(synth & PDR_SYNTH_5_GHZ_DISABLED)) |
| 496 | dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz; |
| 497 | if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED) |
| 498 | priv->rx_diversity_mask = 3; |
| 499 | if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED) |
| 500 | priv->tx_diversity_mask = 3; |
| 501 | |
| 502 | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { |
| 503 | u8 perm_addr[ETH_ALEN]; |
| 504 | |
| 505 | printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n", |
| 506 | wiphy_name(dev->wiphy)); |
| 507 | random_ether_addr(perm_addr); |
| 508 | SET_IEEE80211_PERM_ADDR(dev, perm_addr); |
| 509 | } |
| 510 | |
| 511 | printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n", |
| 512 | wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version, |
| 513 | p54_rf_chips[priv->rxhw]); |
| 514 | |
| 515 | return 0; |
| 516 | |
| 517 | err: |
| 518 | kfree(priv->iq_autocal); |
| 519 | kfree(priv->output_limit); |
| 520 | kfree(priv->curve_data); |
| 521 | priv->iq_autocal = NULL; |
| 522 | priv->output_limit = NULL; |
| 523 | priv->curve_data = NULL; |
| 524 | |
| 525 | printk(KERN_ERR "%s: eeprom parse failed!\n", |
| 526 | wiphy_name(dev->wiphy)); |
| 527 | return err; |
| 528 | } |
| 529 | EXPORT_SYMBOL_GPL(p54_parse_eeprom); |
| 530 | |
| 531 | int p54_read_eeprom(struct ieee80211_hw *dev) |
| 532 | { |
| 533 | struct p54_common *priv = dev->priv; |
| 534 | size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize; |
| 535 | int ret = -ENOMEM; |
| 536 | void *eeprom = NULL; |
| 537 | |
| 538 | maxblocksize = EEPROM_READBACK_LEN; |
| 539 | if (priv->fw_var >= 0x509) |
| 540 | maxblocksize -= 0xc; |
| 541 | else |
| 542 | maxblocksize -= 0x4; |
| 543 | |
| 544 | eeprom = kzalloc(eeprom_size, GFP_KERNEL); |
| 545 | if (unlikely(!eeprom)) |
| 546 | goto free; |
| 547 | |
| 548 | while (eeprom_size) { |
| 549 | blocksize = min(eeprom_size, maxblocksize); |
| 550 | ret = p54_download_eeprom(priv, (void *) (eeprom + offset), |
| 551 | offset, blocksize); |
| 552 | if (unlikely(ret)) |
| 553 | goto free; |
| 554 | |
| 555 | offset += blocksize; |
| 556 | eeprom_size -= blocksize; |
| 557 | } |
| 558 | |
| 559 | ret = p54_parse_eeprom(dev, eeprom, offset); |
| 560 | free: |
| 561 | kfree(eeprom); |
| 562 | return ret; |
| 563 | } |
| 564 | EXPORT_SYMBOL_GPL(p54_read_eeprom); |