| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1 | /******************************************************************* |
| 2 | * This file is part of the Emulex Linux Device Driver for * |
| 3 | * Enterprise Fibre Channel Host Bus Adapters. * |
| 4 | * Refer to the README file included with this package for * |
| 5 | * driver version and adapter support. * |
| 6 | * Copyright (C) 2004 Emulex Corporation. * |
| 7 | * www.emulex.com * |
| 8 | * * |
| 9 | * This program is free software; you can redistribute it and/or * |
| 10 | * modify it under the terms of the GNU General Public License * |
| 11 | * as published by the Free Software Foundation; either version 2 * |
| 12 | * of the License, or (at your option) any later version. * |
| 13 | * * |
| 14 | * This program is distributed in the hope that it will be useful, * |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| 17 | * GNU General Public License for more details, a copy of which * |
| 18 | * can be found in the file COPYING included with this package. * |
| 19 | *******************************************************************/ |
| 20 | |
| 21 | /* |
| 22 | * $Id: lpfc_sli.c 1.232 2005/04/13 11:59:16EDT sf_support Exp $ |
| 23 | */ |
| 24 | |
| 25 | #include <linux/blkdev.h> |
| 26 | #include <linux/pci.h> |
| 27 | #include <linux/interrupt.h> |
| 28 | #include <linux/delay.h> |
| 29 | |
| 30 | #include <scsi/scsi_cmnd.h> |
| 31 | #include <scsi/scsi_device.h> |
| 32 | #include <scsi/scsi_host.h> |
| 33 | |
| 34 | #include "lpfc_hw.h" |
| 35 | #include "lpfc_sli.h" |
| 36 | #include "lpfc_disc.h" |
| 37 | #include "lpfc_scsi.h" |
| 38 | #include "lpfc.h" |
| 39 | #include "lpfc_crtn.h" |
| 40 | #include "lpfc_logmsg.h" |
| 41 | #include "lpfc_compat.h" |
| 42 | |
| 43 | /* |
| 44 | * Define macro to log: Mailbox command x%x cannot issue Data |
| 45 | * This allows multiple uses of lpfc_msgBlk0311 |
| 46 | * w/o perturbing log msg utility. |
| 47 | */ |
| 48 | #define LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) \ |
| 49 | lpfc_printf_log(phba, \ |
| 50 | KERN_INFO, \ |
| 51 | LOG_MBOX | LOG_SLI, \ |
| 52 | "%d:0311 Mailbox command x%x cannot issue " \ |
| 53 | "Data: x%x x%x x%x\n", \ |
| 54 | phba->brd_no, \ |
| 55 | mb->mbxCommand, \ |
| 56 | phba->hba_state, \ |
| 57 | psli->sli_flag, \ |
| 58 | flag); |
| 59 | |
| 60 | |
| 61 | /* There are only four IOCB completion types. */ |
| 62 | typedef enum _lpfc_iocb_type { |
| 63 | LPFC_UNKNOWN_IOCB, |
| 64 | LPFC_UNSOL_IOCB, |
| 65 | LPFC_SOL_IOCB, |
| 66 | LPFC_ABORT_IOCB |
| 67 | } lpfc_iocb_type; |
| 68 | |
| 69 | /* |
| 70 | * Translate the iocb command to an iocb command type used to decide the final |
| 71 | * disposition of each completed IOCB. |
| 72 | */ |
| 73 | static lpfc_iocb_type |
| 74 | lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) |
| 75 | { |
| 76 | lpfc_iocb_type type = LPFC_UNKNOWN_IOCB; |
| 77 | |
| 78 | if (iocb_cmnd > CMD_MAX_IOCB_CMD) |
| 79 | return 0; |
| 80 | |
| 81 | switch (iocb_cmnd) { |
| 82 | case CMD_XMIT_SEQUENCE_CR: |
| 83 | case CMD_XMIT_SEQUENCE_CX: |
| 84 | case CMD_XMIT_BCAST_CN: |
| 85 | case CMD_XMIT_BCAST_CX: |
| 86 | case CMD_ELS_REQUEST_CR: |
| 87 | case CMD_ELS_REQUEST_CX: |
| 88 | case CMD_CREATE_XRI_CR: |
| 89 | case CMD_CREATE_XRI_CX: |
| 90 | case CMD_GET_RPI_CN: |
| 91 | case CMD_XMIT_ELS_RSP_CX: |
| 92 | case CMD_GET_RPI_CR: |
| 93 | case CMD_FCP_IWRITE_CR: |
| 94 | case CMD_FCP_IWRITE_CX: |
| 95 | case CMD_FCP_IREAD_CR: |
| 96 | case CMD_FCP_IREAD_CX: |
| 97 | case CMD_FCP_ICMND_CR: |
| 98 | case CMD_FCP_ICMND_CX: |
| 99 | case CMD_ADAPTER_MSG: |
| 100 | case CMD_ADAPTER_DUMP: |
| 101 | case CMD_XMIT_SEQUENCE64_CR: |
| 102 | case CMD_XMIT_SEQUENCE64_CX: |
| 103 | case CMD_XMIT_BCAST64_CN: |
| 104 | case CMD_XMIT_BCAST64_CX: |
| 105 | case CMD_ELS_REQUEST64_CR: |
| 106 | case CMD_ELS_REQUEST64_CX: |
| 107 | case CMD_FCP_IWRITE64_CR: |
| 108 | case CMD_FCP_IWRITE64_CX: |
| 109 | case CMD_FCP_IREAD64_CR: |
| 110 | case CMD_FCP_IREAD64_CX: |
| 111 | case CMD_FCP_ICMND64_CR: |
| 112 | case CMD_FCP_ICMND64_CX: |
| 113 | case CMD_GEN_REQUEST64_CR: |
| 114 | case CMD_GEN_REQUEST64_CX: |
| 115 | case CMD_XMIT_ELS_RSP64_CX: |
| 116 | type = LPFC_SOL_IOCB; |
| 117 | break; |
| 118 | case CMD_ABORT_XRI_CN: |
| 119 | case CMD_ABORT_XRI_CX: |
| 120 | case CMD_CLOSE_XRI_CN: |
| 121 | case CMD_CLOSE_XRI_CX: |
| 122 | case CMD_XRI_ABORTED_CX: |
| 123 | case CMD_ABORT_MXRI64_CN: |
| 124 | type = LPFC_ABORT_IOCB; |
| 125 | break; |
| 126 | case CMD_RCV_SEQUENCE_CX: |
| 127 | case CMD_RCV_ELS_REQ_CX: |
| 128 | case CMD_RCV_SEQUENCE64_CX: |
| 129 | case CMD_RCV_ELS_REQ64_CX: |
| 130 | type = LPFC_UNSOL_IOCB; |
| 131 | break; |
| 132 | default: |
| 133 | type = LPFC_UNKNOWN_IOCB; |
| 134 | break; |
| 135 | } |
| 136 | |
| 137 | return type; |
| 138 | } |
| 139 | |
| 140 | static int |
| 141 | lpfc_sli_ring_map(struct lpfc_hba * phba, LPFC_MBOXQ_t *pmb) |
| 142 | { |
| 143 | struct lpfc_sli *psli = &phba->sli; |
| 144 | MAILBOX_t *pmbox = &pmb->mb; |
| 145 | int i, rc; |
| 146 | |
| 147 | for (i = 0; i < psli->num_rings; i++) { |
| 148 | phba->hba_state = LPFC_INIT_MBX_CMDS; |
| 149 | lpfc_config_ring(phba, i, pmb); |
| 150 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 151 | if (rc != MBX_SUCCESS) { |
| 152 | lpfc_printf_log(phba, |
| 153 | KERN_ERR, |
| 154 | LOG_INIT, |
| 155 | "%d:0446 Adapter failed to init, " |
| 156 | "mbxCmd x%x CFG_RING, mbxStatus x%x, " |
| 157 | "ring %d\n", |
| 158 | phba->brd_no, |
| 159 | pmbox->mbxCommand, |
| 160 | pmbox->mbxStatus, |
| 161 | i); |
| 162 | phba->hba_state = LPFC_HBA_ERROR; |
| 163 | return -ENXIO; |
| 164 | } |
| 165 | } |
| 166 | return 0; |
| 167 | } |
| 168 | |
| 169 | static int |
| 170 | lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba, |
| 171 | struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb) |
| 172 | { |
| 173 | uint16_t iotag; |
| 174 | |
| 175 | list_add_tail(&piocb->list, &pring->txcmplq); |
| 176 | pring->txcmplq_cnt++; |
| 177 | if (unlikely(pring->ringno == LPFC_ELS_RING)) |
| 178 | mod_timer(&phba->els_tmofunc, |
| 179 | jiffies + HZ * (phba->fc_ratov << 1)); |
| 180 | |
| 181 | if (pring->fast_lookup) { |
| 182 | /* Setup fast lookup based on iotag for completion */ |
| 183 | iotag = piocb->iocb.ulpIoTag; |
| 184 | if (iotag && (iotag < pring->fast_iotag)) |
| 185 | *(pring->fast_lookup + iotag) = piocb; |
| 186 | else { |
| 187 | |
| 188 | /* Cmd ring <ringno> put: iotag <iotag> greater then |
| 189 | configured max <fast_iotag> wd0 <icmd> */ |
| 190 | lpfc_printf_log(phba, |
| 191 | KERN_ERR, |
| 192 | LOG_SLI, |
| 193 | "%d:0316 Cmd ring %d put: iotag x%x " |
| 194 | "greater then configured max x%x " |
| 195 | "wd0 x%x\n", |
| 196 | phba->brd_no, |
| 197 | pring->ringno, iotag, |
| 198 | pring->fast_iotag, |
| 199 | *(((uint32_t *)(&piocb->iocb)) + 7)); |
| 200 | } |
| 201 | } |
| 202 | return (0); |
| 203 | } |
| 204 | |
| 205 | static struct lpfc_iocbq * |
| 206 | lpfc_sli_ringtx_get(struct lpfc_hba * phba, struct lpfc_sli_ring * pring) |
| 207 | { |
| 208 | struct list_head *dlp; |
| 209 | struct lpfc_iocbq *cmd_iocb; |
| 210 | |
| 211 | dlp = &pring->txq; |
| 212 | cmd_iocb = NULL; |
| 213 | list_remove_head((&pring->txq), cmd_iocb, |
| 214 | struct lpfc_iocbq, |
| 215 | list); |
| 216 | if (cmd_iocb) { |
| 217 | /* If the first ptr is not equal to the list header, |
| 218 | * deque the IOCBQ_t and return it. |
| 219 | */ |
| 220 | pring->txq_cnt--; |
| 221 | } |
| 222 | return (cmd_iocb); |
| 223 | } |
| 224 | |
| 225 | static IOCB_t * |
| 226 | lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) |
| 227 | { |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 228 | struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 229 | uint32_t max_cmd_idx = pring->numCiocb; |
| 230 | IOCB_t *iocb = NULL; |
| 231 | |
| 232 | if ((pring->next_cmdidx == pring->cmdidx) && |
| 233 | (++pring->next_cmdidx >= max_cmd_idx)) |
| 234 | pring->next_cmdidx = 0; |
| 235 | |
| 236 | if (unlikely(pring->local_getidx == pring->next_cmdidx)) { |
| 237 | |
| 238 | pring->local_getidx = le32_to_cpu(pgp->cmdGetInx); |
| 239 | |
| 240 | if (unlikely(pring->local_getidx >= max_cmd_idx)) { |
| 241 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| 242 | "%d:0315 Ring %d issue: portCmdGet %d " |
| 243 | "is bigger then cmd ring %d\n", |
| 244 | phba->brd_no, pring->ringno, |
| 245 | pring->local_getidx, max_cmd_idx); |
| 246 | |
| 247 | phba->hba_state = LPFC_HBA_ERROR; |
| 248 | /* |
| 249 | * All error attention handlers are posted to |
| 250 | * worker thread |
| 251 | */ |
| 252 | phba->work_ha |= HA_ERATT; |
| 253 | phba->work_hs = HS_FFER3; |
| 254 | if (phba->work_wait) |
| 255 | wake_up(phba->work_wait); |
| 256 | |
| 257 | return NULL; |
| 258 | } |
| 259 | |
| 260 | if (pring->local_getidx == pring->next_cmdidx) |
| 261 | return NULL; |
| 262 | } |
| 263 | |
| 264 | iocb = IOCB_ENTRY(pring->cmdringaddr, pring->cmdidx); |
| 265 | |
| 266 | return iocb; |
| 267 | } |
| 268 | |
| 269 | static uint32_t |
| 270 | lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_sli_ring * pring) |
| 271 | { |
| 272 | uint32_t search_start; |
| 273 | |
| 274 | if (pring->fast_lookup == NULL) { |
| 275 | pring->iotag_ctr++; |
| 276 | if (pring->iotag_ctr >= pring->iotag_max) |
| 277 | pring->iotag_ctr = 1; |
| 278 | return pring->iotag_ctr; |
| 279 | } |
| 280 | |
| 281 | search_start = pring->iotag_ctr; |
| 282 | |
| 283 | do { |
| 284 | pring->iotag_ctr++; |
| 285 | if (pring->iotag_ctr >= pring->fast_iotag) |
| 286 | pring->iotag_ctr = 1; |
| 287 | |
| 288 | if (*(pring->fast_lookup + pring->iotag_ctr) == NULL) |
| 289 | return pring->iotag_ctr; |
| 290 | |
| 291 | } while (pring->iotag_ctr != search_start); |
| 292 | |
| 293 | /* |
| 294 | * Outstanding I/O count for ring <ringno> is at max <fast_iotag> |
| 295 | */ |
| 296 | lpfc_printf_log(phba, |
| 297 | KERN_ERR, |
| 298 | LOG_SLI, |
| 299 | "%d:0318 Outstanding I/O count for ring %d is at max x%x\n", |
| 300 | phba->brd_no, |
| 301 | pring->ringno, |
| 302 | pring->fast_iotag); |
| 303 | return (0); |
| 304 | } |
| 305 | |
| 306 | static void |
| 307 | lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 308 | IOCB_t *iocb, struct lpfc_iocbq *nextiocb) |
| 309 | { |
| 310 | /* |
| 311 | * Allocate and set up an iotag |
| 312 | */ |
| 313 | nextiocb->iocb.ulpIoTag = |
| 314 | lpfc_sli_next_iotag(phba, &phba->sli.ring[phba->sli.fcp_ring]); |
| 315 | |
| 316 | /* |
| 317 | * Issue iocb command to adapter |
| 318 | */ |
| 319 | lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, sizeof (IOCB_t)); |
| 320 | wmb(); |
| 321 | pring->stats.iocb_cmd++; |
| 322 | |
| 323 | /* |
| 324 | * If there is no completion routine to call, we can release the |
| 325 | * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF, |
| 326 | * that have no rsp ring completion, iocb_cmpl MUST be NULL. |
| 327 | */ |
| 328 | if (nextiocb->iocb_cmpl) |
| 329 | lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb); |
| 330 | else { |
| 331 | list_add_tail(&nextiocb->list, &phba->lpfc_iocb_list); |
| 332 | } |
| 333 | |
| 334 | /* |
| 335 | * Let the HBA know what IOCB slot will be the next one the |
| 336 | * driver will put a command into. |
| 337 | */ |
| 338 | pring->cmdidx = pring->next_cmdidx; |
| 339 | writeb(pring->cmdidx, phba->MBslimaddr |
| 340 | + (SLIMOFF + (pring->ringno * 2)) * 4); |
| 341 | } |
| 342 | |
| 343 | static void |
| 344 | lpfc_sli_update_full_ring(struct lpfc_hba * phba, |
| 345 | struct lpfc_sli_ring *pring) |
| 346 | { |
| 347 | int ringno = pring->ringno; |
| 348 | |
| 349 | pring->flag |= LPFC_CALL_RING_AVAILABLE; |
| 350 | |
| 351 | wmb(); |
| 352 | |
| 353 | /* |
| 354 | * Set ring 'ringno' to SET R0CE_REQ in Chip Att register. |
| 355 | * The HBA will tell us when an IOCB entry is available. |
| 356 | */ |
| 357 | writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr); |
| 358 | readl(phba->CAregaddr); /* flush */ |
| 359 | |
| 360 | pring->stats.iocb_cmd_full++; |
| 361 | } |
| 362 | |
| 363 | static void |
| 364 | lpfc_sli_update_ring(struct lpfc_hba * phba, |
| 365 | struct lpfc_sli_ring *pring) |
| 366 | { |
| 367 | int ringno = pring->ringno; |
| 368 | |
| 369 | /* |
| 370 | * Tell the HBA that there is work to do in this ring. |
| 371 | */ |
| 372 | wmb(); |
| 373 | writel(CA_R0ATT << (ringno * 4), phba->CAregaddr); |
| 374 | readl(phba->CAregaddr); /* flush */ |
| 375 | } |
| 376 | |
| 377 | static void |
| 378 | lpfc_sli_resume_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring) |
| 379 | { |
| 380 | IOCB_t *iocb; |
| 381 | struct lpfc_iocbq *nextiocb; |
| 382 | |
| 383 | /* |
| 384 | * Check to see if: |
| 385 | * (a) there is anything on the txq to send |
| 386 | * (b) link is up |
| 387 | * (c) link attention events can be processed (fcp ring only) |
| 388 | * (d) IOCB processing is not blocked by the outstanding mbox command. |
| 389 | */ |
| 390 | if (pring->txq_cnt && |
| 391 | (phba->hba_state > LPFC_LINK_DOWN) && |
| 392 | (pring->ringno != phba->sli.fcp_ring || |
| 393 | phba->sli.sli_flag & LPFC_PROCESS_LA) && |
| 394 | !(pring->flag & LPFC_STOP_IOCB_MBX)) { |
| 395 | |
| 396 | while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) && |
| 397 | (nextiocb = lpfc_sli_ringtx_get(phba, pring))) |
| 398 | lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb); |
| 399 | |
| 400 | if (iocb) |
| 401 | lpfc_sli_update_ring(phba, pring); |
| 402 | else |
| 403 | lpfc_sli_update_full_ring(phba, pring); |
| 404 | } |
| 405 | |
| 406 | return; |
| 407 | } |
| 408 | |
| 409 | /* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */ |
| 410 | static void |
| 411 | lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno) |
| 412 | { |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 413 | struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[ringno]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 414 | |
| 415 | /* If the ring is active, flag it */ |
| 416 | if (phba->sli.ring[ringno].cmdringaddr) { |
| 417 | if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) { |
| 418 | phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX; |
| 419 | /* |
| 420 | * Force update of the local copy of cmdGetInx |
| 421 | */ |
| 422 | phba->sli.ring[ringno].local_getidx |
| 423 | = le32_to_cpu(pgp->cmdGetInx); |
| 424 | spin_lock_irq(phba->host->host_lock); |
| 425 | lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]); |
| 426 | spin_unlock_irq(phba->host->host_lock); |
| 427 | } |
| 428 | } |
| 429 | } |
| 430 | |
| 431 | static int |
| 432 | lpfc_sli_chk_mbx_command(uint8_t mbxCommand) |
| 433 | { |
| 434 | uint8_t ret; |
| 435 | |
| 436 | switch (mbxCommand) { |
| 437 | case MBX_LOAD_SM: |
| 438 | case MBX_READ_NV: |
| 439 | case MBX_WRITE_NV: |
| 440 | case MBX_RUN_BIU_DIAG: |
| 441 | case MBX_INIT_LINK: |
| 442 | case MBX_DOWN_LINK: |
| 443 | case MBX_CONFIG_LINK: |
| 444 | case MBX_CONFIG_RING: |
| 445 | case MBX_RESET_RING: |
| 446 | case MBX_READ_CONFIG: |
| 447 | case MBX_READ_RCONFIG: |
| 448 | case MBX_READ_SPARM: |
| 449 | case MBX_READ_STATUS: |
| 450 | case MBX_READ_RPI: |
| 451 | case MBX_READ_XRI: |
| 452 | case MBX_READ_REV: |
| 453 | case MBX_READ_LNK_STAT: |
| 454 | case MBX_REG_LOGIN: |
| 455 | case MBX_UNREG_LOGIN: |
| 456 | case MBX_READ_LA: |
| 457 | case MBX_CLEAR_LA: |
| 458 | case MBX_DUMP_MEMORY: |
| 459 | case MBX_DUMP_CONTEXT: |
| 460 | case MBX_RUN_DIAGS: |
| 461 | case MBX_RESTART: |
| 462 | case MBX_UPDATE_CFG: |
| 463 | case MBX_DOWN_LOAD: |
| 464 | case MBX_DEL_LD_ENTRY: |
| 465 | case MBX_RUN_PROGRAM: |
| 466 | case MBX_SET_MASK: |
| 467 | case MBX_SET_SLIM: |
| 468 | case MBX_UNREG_D_ID: |
| 469 | case MBX_CONFIG_FARP: |
| 470 | case MBX_LOAD_AREA: |
| 471 | case MBX_RUN_BIU_DIAG64: |
| 472 | case MBX_CONFIG_PORT: |
| 473 | case MBX_READ_SPARM64: |
| 474 | case MBX_READ_RPI64: |
| 475 | case MBX_REG_LOGIN64: |
| 476 | case MBX_READ_LA64: |
| 477 | case MBX_FLASH_WR_ULA: |
| 478 | case MBX_SET_DEBUG: |
| 479 | case MBX_LOAD_EXP_ROM: |
| 480 | ret = mbxCommand; |
| 481 | break; |
| 482 | default: |
| 483 | ret = MBX_SHUTDOWN; |
| 484 | break; |
| 485 | } |
| 486 | return (ret); |
| 487 | } |
| 488 | static void |
| 489 | lpfc_sli_wake_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) |
| 490 | { |
| 491 | wait_queue_head_t *pdone_q; |
| 492 | |
| 493 | /* |
| 494 | * If pdone_q is empty, the driver thread gave up waiting and |
| 495 | * continued running. |
| 496 | */ |
| 497 | pdone_q = (wait_queue_head_t *) pmboxq->context1; |
| 498 | if (pdone_q) |
| 499 | wake_up_interruptible(pdone_q); |
| 500 | return; |
| 501 | } |
| 502 | |
| 503 | void |
| 504 | lpfc_sli_def_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| 505 | { |
| 506 | struct lpfc_dmabuf *mp; |
| 507 | mp = (struct lpfc_dmabuf *) (pmb->context1); |
| 508 | if (mp) { |
| 509 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| 510 | kfree(mp); |
| 511 | } |
| 512 | mempool_free( pmb, phba->mbox_mem_pool); |
| 513 | return; |
| 514 | } |
| 515 | |
| 516 | int |
| 517 | lpfc_sli_handle_mb_event(struct lpfc_hba * phba) |
| 518 | { |
| 519 | MAILBOX_t *mbox; |
| 520 | MAILBOX_t *pmbox; |
| 521 | LPFC_MBOXQ_t *pmb; |
| 522 | struct lpfc_sli *psli; |
| 523 | int i, rc; |
| 524 | uint32_t process_next; |
| 525 | |
| 526 | psli = &phba->sli; |
| 527 | /* We should only get here if we are in SLI2 mode */ |
| 528 | if (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE)) { |
| 529 | return (1); |
| 530 | } |
| 531 | |
| 532 | phba->sli.slistat.mbox_event++; |
| 533 | |
| 534 | /* Get a Mailbox buffer to setup mailbox commands for callback */ |
| 535 | if ((pmb = phba->sli.mbox_active)) { |
| 536 | pmbox = &pmb->mb; |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 537 | mbox = &phba->slim2p->mbx; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 538 | |
| 539 | /* First check out the status word */ |
| 540 | lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t)); |
| 541 | |
| 542 | /* Sanity check to ensure the host owns the mailbox */ |
| 543 | if (pmbox->mbxOwner != OWN_HOST) { |
| 544 | /* Lets try for a while */ |
| 545 | for (i = 0; i < 10240; i++) { |
| 546 | /* First copy command data */ |
| 547 | lpfc_sli_pcimem_bcopy(mbox, pmbox, |
| 548 | sizeof (uint32_t)); |
| 549 | if (pmbox->mbxOwner == OWN_HOST) |
| 550 | goto mbout; |
| 551 | } |
| 552 | /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus |
| 553 | <status> */ |
| 554 | lpfc_printf_log(phba, |
| 555 | KERN_ERR, |
| 556 | LOG_MBOX | LOG_SLI, |
| 557 | "%d:0304 Stray Mailbox Interrupt " |
| 558 | "mbxCommand x%x mbxStatus x%x\n", |
| 559 | phba->brd_no, |
| 560 | pmbox->mbxCommand, |
| 561 | pmbox->mbxStatus); |
| 562 | |
| 563 | spin_lock_irq(phba->host->host_lock); |
| 564 | phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE; |
| 565 | spin_unlock_irq(phba->host->host_lock); |
| 566 | return (1); |
| 567 | } |
| 568 | |
| 569 | mbout: |
| 570 | del_timer_sync(&phba->sli.mbox_tmo); |
| 571 | phba->work_hba_events &= ~WORKER_MBOX_TMO; |
| 572 | |
| 573 | /* |
| 574 | * It is a fatal error if unknown mbox command completion. |
| 575 | */ |
| 576 | if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) == |
| 577 | MBX_SHUTDOWN) { |
| 578 | |
| 579 | /* Unknow mailbox command compl */ |
| 580 | lpfc_printf_log(phba, |
| 581 | KERN_ERR, |
| 582 | LOG_MBOX | LOG_SLI, |
| 583 | "%d:0323 Unknown Mailbox command %x Cmpl\n", |
| 584 | phba->brd_no, |
| 585 | pmbox->mbxCommand); |
| 586 | phba->hba_state = LPFC_HBA_ERROR; |
| 587 | phba->work_hs = HS_FFER3; |
| 588 | lpfc_handle_eratt(phba); |
| 589 | return (0); |
| 590 | } |
| 591 | |
| 592 | phba->sli.mbox_active = NULL; |
| 593 | if (pmbox->mbxStatus) { |
| 594 | phba->sli.slistat.mbox_stat_err++; |
| 595 | if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) { |
| 596 | /* Mbox cmd cmpl error - RETRYing */ |
| 597 | lpfc_printf_log(phba, |
| 598 | KERN_INFO, |
| 599 | LOG_MBOX | LOG_SLI, |
| 600 | "%d:0305 Mbox cmd cmpl error - " |
| 601 | "RETRYing Data: x%x x%x x%x x%x\n", |
| 602 | phba->brd_no, |
| 603 | pmbox->mbxCommand, |
| 604 | pmbox->mbxStatus, |
| 605 | pmbox->un.varWords[0], |
| 606 | phba->hba_state); |
| 607 | pmbox->mbxStatus = 0; |
| 608 | pmbox->mbxOwner = OWN_HOST; |
| 609 | spin_lock_irq(phba->host->host_lock); |
| 610 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 611 | spin_unlock_irq(phba->host->host_lock); |
| 612 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
| 613 | if (rc == MBX_SUCCESS) |
| 614 | return (0); |
| 615 | } |
| 616 | } |
| 617 | |
| 618 | /* Mailbox cmd <cmd> Cmpl <cmpl> */ |
| 619 | lpfc_printf_log(phba, |
| 620 | KERN_INFO, |
| 621 | LOG_MBOX | LOG_SLI, |
| 622 | "%d:0307 Mailbox cmd x%x Cmpl x%p " |
| 623 | "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n", |
| 624 | phba->brd_no, |
| 625 | pmbox->mbxCommand, |
| 626 | pmb->mbox_cmpl, |
| 627 | *((uint32_t *) pmbox), |
| 628 | pmbox->un.varWords[0], |
| 629 | pmbox->un.varWords[1], |
| 630 | pmbox->un.varWords[2], |
| 631 | pmbox->un.varWords[3], |
| 632 | pmbox->un.varWords[4], |
| 633 | pmbox->un.varWords[5], |
| 634 | pmbox->un.varWords[6], |
| 635 | pmbox->un.varWords[7]); |
| 636 | |
| 637 | if (pmb->mbox_cmpl) { |
| 638 | lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE); |
| 639 | pmb->mbox_cmpl(phba,pmb); |
| 640 | } |
| 641 | } |
| 642 | |
| 643 | |
| 644 | do { |
| 645 | process_next = 0; /* by default don't loop */ |
| 646 | spin_lock_irq(phba->host->host_lock); |
| 647 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 648 | |
| 649 | /* Process next mailbox command if there is one */ |
| 650 | if ((pmb = lpfc_mbox_get(phba))) { |
| 651 | spin_unlock_irq(phba->host->host_lock); |
| 652 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
| 653 | if (rc == MBX_NOT_FINISHED) { |
| 654 | pmb->mb.mbxStatus = MBX_NOT_FINISHED; |
| 655 | pmb->mbox_cmpl(phba,pmb); |
| 656 | process_next = 1; |
| 657 | continue; /* loop back */ |
| 658 | } |
| 659 | } else { |
| 660 | spin_unlock_irq(phba->host->host_lock); |
| 661 | /* Turn on IOCB processing */ |
| 662 | for (i = 0; i < phba->sli.num_rings; i++) { |
| 663 | lpfc_sli_turn_on_ring(phba, i); |
| 664 | } |
| 665 | |
| 666 | /* Free any lpfc_dmabuf's waiting for mbox cmd cmpls */ |
| 667 | while (!list_empty(&phba->freebufList)) { |
| 668 | struct lpfc_dmabuf *mp; |
| 669 | |
| 670 | mp = NULL; |
| 671 | list_remove_head((&phba->freebufList), |
| 672 | mp, |
| 673 | struct lpfc_dmabuf, |
| 674 | list); |
| 675 | if (mp) { |
| 676 | lpfc_mbuf_free(phba, mp->virt, |
| 677 | mp->phys); |
| 678 | kfree(mp); |
| 679 | } |
| 680 | } |
| 681 | } |
| 682 | |
| 683 | } while (process_next); |
| 684 | |
| 685 | return (0); |
| 686 | } |
| 687 | static int |
| 688 | lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 689 | struct lpfc_iocbq *saveq) |
| 690 | { |
| 691 | IOCB_t * irsp; |
| 692 | WORD5 * w5p; |
| 693 | uint32_t Rctl, Type; |
| 694 | uint32_t match, i; |
| 695 | |
| 696 | match = 0; |
| 697 | irsp = &(saveq->iocb); |
| 698 | if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) |
| 699 | || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)) { |
| 700 | Rctl = FC_ELS_REQ; |
| 701 | Type = FC_ELS_DATA; |
| 702 | } else { |
| 703 | w5p = |
| 704 | (WORD5 *) & (saveq->iocb.un. |
| 705 | ulpWord[5]); |
| 706 | Rctl = w5p->hcsw.Rctl; |
| 707 | Type = w5p->hcsw.Type; |
| 708 | |
| 709 | /* Firmware Workaround */ |
| 710 | if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) && |
| 711 | (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX)) { |
| 712 | Rctl = FC_ELS_REQ; |
| 713 | Type = FC_ELS_DATA; |
| 714 | w5p->hcsw.Rctl = Rctl; |
| 715 | w5p->hcsw.Type = Type; |
| 716 | } |
| 717 | } |
| 718 | /* unSolicited Responses */ |
| 719 | if (pring->prt[0].profile) { |
| 720 | (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring, saveq); |
| 721 | match = 1; |
| 722 | } else { |
| 723 | /* We must search, based on rctl / type |
| 724 | for the right routine */ |
| 725 | for (i = 0; i < pring->num_mask; |
| 726 | i++) { |
| 727 | if ((pring->prt[i].rctl == |
| 728 | Rctl) |
| 729 | && (pring->prt[i]. |
| 730 | type == Type)) { |
| 731 | (pring->prt[i].lpfc_sli_rcv_unsol_event) |
| 732 | (phba, pring, saveq); |
| 733 | match = 1; |
| 734 | break; |
| 735 | } |
| 736 | } |
| 737 | } |
| 738 | if (match == 0) { |
| 739 | /* Unexpected Rctl / Type received */ |
| 740 | /* Ring <ringno> handler: unexpected |
| 741 | Rctl <Rctl> Type <Type> received */ |
| 742 | lpfc_printf_log(phba, |
| 743 | KERN_WARNING, |
| 744 | LOG_SLI, |
| 745 | "%d:0313 Ring %d handler: unexpected Rctl x%x " |
| 746 | "Type x%x received \n", |
| 747 | phba->brd_no, |
| 748 | pring->ringno, |
| 749 | Rctl, |
| 750 | Type); |
| 751 | } |
| 752 | return(1); |
| 753 | } |
| 754 | |
| 755 | static struct lpfc_iocbq * |
| 756 | lpfc_sli_txcmpl_ring_search_slow(struct lpfc_sli_ring * pring, |
| 757 | struct lpfc_iocbq * prspiocb) |
| 758 | { |
| 759 | IOCB_t *icmd = NULL; |
| 760 | IOCB_t *irsp = NULL; |
| 761 | struct lpfc_iocbq *cmd_iocb; |
| 762 | struct lpfc_iocbq *iocb, *next_iocb; |
| 763 | uint16_t iotag; |
| 764 | |
| 765 | irsp = &prspiocb->iocb; |
| 766 | iotag = irsp->ulpIoTag; |
| 767 | cmd_iocb = NULL; |
| 768 | |
| 769 | /* Search through txcmpl from the begining */ |
| 770 | list_for_each_entry_safe(iocb, next_iocb, &(pring->txcmplq), list) { |
| 771 | icmd = &iocb->iocb; |
| 772 | if (iotag == icmd->ulpIoTag) { |
| 773 | /* Found a match. */ |
| 774 | cmd_iocb = iocb; |
| 775 | list_del(&iocb->list); |
| 776 | pring->txcmplq_cnt--; |
| 777 | break; |
| 778 | } |
| 779 | } |
| 780 | |
| 781 | return (cmd_iocb); |
| 782 | } |
| 783 | |
| 784 | static struct lpfc_iocbq * |
| 785 | lpfc_sli_txcmpl_ring_iotag_lookup(struct lpfc_hba * phba, |
| 786 | struct lpfc_sli_ring * pring, |
| 787 | struct lpfc_iocbq * prspiocb) |
| 788 | { |
| 789 | IOCB_t *irsp = NULL; |
| 790 | struct lpfc_iocbq *cmd_iocb = NULL; |
| 791 | uint16_t iotag; |
| 792 | |
| 793 | if (unlikely(pring->fast_lookup == NULL)) |
| 794 | return NULL; |
| 795 | |
| 796 | /* Use fast lookup based on iotag for completion */ |
| 797 | irsp = &prspiocb->iocb; |
| 798 | iotag = irsp->ulpIoTag; |
| 799 | if (iotag < pring->fast_iotag) { |
| 800 | cmd_iocb = *(pring->fast_lookup + iotag); |
| 801 | *(pring->fast_lookup + iotag) = NULL; |
| 802 | if (cmd_iocb) { |
| 803 | list_del(&cmd_iocb->list); |
| 804 | pring->txcmplq_cnt--; |
| 805 | return cmd_iocb; |
| 806 | } else { |
| 807 | /* |
| 808 | * This is clearly an error. A ring that uses iotags |
| 809 | * should never have a interrupt for a completion that |
| 810 | * is not on the ring. Return NULL and log a error. |
| 811 | */ |
| 812 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| 813 | "%d:0327 Rsp ring %d error - command " |
| 814 | "completion for iotag x%x not found\n", |
| 815 | phba->brd_no, pring->ringno, iotag); |
| 816 | return NULL; |
| 817 | } |
| 818 | } |
| 819 | |
| 820 | /* |
| 821 | * Rsp ring <ringno> get: iotag <iotag> greater then |
| 822 | * configured max <fast_iotag> wd0 <irsp>. This is an |
| 823 | * error. Just return NULL. |
| 824 | */ |
| 825 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| 826 | "%d:0317 Rsp ring %d get: iotag x%x greater then " |
| 827 | "configured max x%x wd0 x%x\n", |
| 828 | phba->brd_no, pring->ringno, iotag, pring->fast_iotag, |
| 829 | *(((uint32_t *) irsp) + 7)); |
| 830 | return NULL; |
| 831 | } |
| 832 | |
| 833 | static int |
| 834 | lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, |
| 835 | struct lpfc_iocbq *saveq) |
| 836 | { |
| 837 | struct lpfc_iocbq * cmdiocbp; |
| 838 | int rc = 1; |
| 839 | unsigned long iflag; |
| 840 | |
| 841 | /* Based on the iotag field, get the cmd IOCB from the txcmplq */ |
| 842 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 843 | cmdiocbp = lpfc_sli_txcmpl_ring_search_slow(pring, saveq); |
| 844 | if (cmdiocbp) { |
| 845 | if (cmdiocbp->iocb_cmpl) { |
| 846 | /* |
| 847 | * Post all ELS completions to the worker thread. |
| 848 | * All other are passed to the completion callback. |
| 849 | */ |
| 850 | if (pring->ringno == LPFC_ELS_RING) { |
| 851 | spin_unlock_irqrestore(phba->host->host_lock, |
| 852 | iflag); |
| 853 | (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq); |
| 854 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 855 | } |
| 856 | else { |
| 857 | if (cmdiocbp->iocb_flag & LPFC_IO_POLL) |
| 858 | rc = 0; |
| 859 | |
| 860 | spin_unlock_irqrestore(phba->host->host_lock, |
| 861 | iflag); |
| 862 | (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq); |
| 863 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 864 | } |
| 865 | } else { |
| 866 | list_add_tail(&cmdiocbp->list, &phba->lpfc_iocb_list); |
| 867 | } |
| 868 | } else { |
| 869 | /* |
| 870 | * Unknown initiating command based on the response iotag. |
| 871 | * This could be the case on the ELS ring because of |
| 872 | * lpfc_els_abort(). |
| 873 | */ |
| 874 | if (pring->ringno != LPFC_ELS_RING) { |
| 875 | /* |
| 876 | * Ring <ringno> handler: unexpected completion IoTag |
| 877 | * <IoTag> |
| 878 | */ |
| 879 | lpfc_printf_log(phba, |
| 880 | KERN_WARNING, |
| 881 | LOG_SLI, |
| 882 | "%d:0322 Ring %d handler: unexpected " |
| 883 | "completion IoTag x%x Data: x%x x%x x%x x%x\n", |
| 884 | phba->brd_no, |
| 885 | pring->ringno, |
| 886 | saveq->iocb.ulpIoTag, |
| 887 | saveq->iocb.ulpStatus, |
| 888 | saveq->iocb.un.ulpWord[4], |
| 889 | saveq->iocb.ulpCommand, |
| 890 | saveq->iocb.ulpContext); |
| 891 | } |
| 892 | } |
| 893 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 894 | return rc; |
| 895 | } |
| 896 | |
| 897 | /* |
| 898 | * This routine presumes LPFC_FCP_RING handling and doesn't bother |
| 899 | * to check it explicitly. |
| 900 | */ |
| 901 | static int |
| 902 | lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, |
| 903 | struct lpfc_sli_ring * pring, uint32_t mask) |
| 904 | { |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 905 | struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 906 | IOCB_t *irsp = NULL; |
| 907 | struct lpfc_iocbq *cmdiocbq = NULL; |
| 908 | struct lpfc_iocbq rspiocbq; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 909 | uint32_t status; |
| 910 | uint32_t portRspPut, portRspMax; |
| 911 | int rc = 1; |
| 912 | lpfc_iocb_type type; |
| 913 | unsigned long iflag; |
| 914 | uint32_t rsp_cmpl = 0; |
| 915 | void __iomem *to_slim; |
| 916 | |
| 917 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 918 | pring->stats.iocb_event++; |
| 919 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 920 | /* |
| 921 | * The next available response entry should never exceed the maximum |
| 922 | * entries. If it does, treat it as an adapter hardware error. |
| 923 | */ |
| 924 | portRspMax = pring->numRiocb; |
| 925 | portRspPut = le32_to_cpu(pgp->rspPutInx); |
| 926 | if (unlikely(portRspPut >= portRspMax)) { |
| 927 | /* |
| 928 | * Ring <ringno> handler: portRspPut <portRspPut> is bigger then |
| 929 | * rsp ring <portRspMax> |
| 930 | */ |
| 931 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| 932 | "%d:0312 Ring %d handler: portRspPut %d " |
| 933 | "is bigger then rsp ring %d\n", |
| 934 | phba->brd_no, pring->ringno, portRspPut, |
| 935 | portRspMax); |
| 936 | |
| 937 | phba->hba_state = LPFC_HBA_ERROR; |
| 938 | |
| 939 | /* All error attention handlers are posted to worker thread */ |
| 940 | phba->work_ha |= HA_ERATT; |
| 941 | phba->work_hs = HS_FFER3; |
| 942 | if (phba->work_wait) |
| 943 | wake_up(phba->work_wait); |
| 944 | |
| 945 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 946 | return 1; |
| 947 | } |
| 948 | |
| 949 | rmb(); |
| 950 | while (pring->rspidx != portRspPut) { |
| 951 | irsp = (IOCB_t *) IOCB_ENTRY(pring->rspringaddr, pring->rspidx); |
| 952 | type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK); |
| 953 | pring->stats.iocb_rsp++; |
| 954 | rsp_cmpl++; |
| 955 | |
| 956 | if (unlikely(irsp->ulpStatus)) { |
| 957 | /* Rsp ring <ringno> error: IOCB */ |
| 958 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
| 959 | "%d:0326 Rsp Ring %d error: IOCB Data: " |
| 960 | "x%x x%x x%x x%x x%x x%x x%x x%x\n", |
| 961 | phba->brd_no, pring->ringno, |
| 962 | irsp->un.ulpWord[0], irsp->un.ulpWord[1], |
| 963 | irsp->un.ulpWord[2], irsp->un.ulpWord[3], |
| 964 | irsp->un.ulpWord[4], irsp->un.ulpWord[5], |
| 965 | *(((uint32_t *) irsp) + 6), |
| 966 | *(((uint32_t *) irsp) + 7)); |
| 967 | } |
| 968 | |
| 969 | switch (type) { |
| 970 | case LPFC_ABORT_IOCB: |
| 971 | case LPFC_SOL_IOCB: |
| 972 | /* |
| 973 | * Idle exchange closed via ABTS from port. No iocb |
| 974 | * resources need to be recovered. |
| 975 | */ |
| 976 | if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { |
| 977 | printk(KERN_INFO "%s: IOCB cmd 0x%x processed. " |
| 978 | "Skipping completion\n", __FUNCTION__, |
| 979 | irsp->ulpCommand); |
| 980 | break; |
| 981 | } |
| 982 | |
| 983 | rspiocbq.iocb.un.ulpWord[4] = irsp->un.ulpWord[4]; |
| 984 | rspiocbq.iocb.ulpStatus = irsp->ulpStatus; |
| 985 | rspiocbq.iocb.ulpContext = irsp->ulpContext; |
| 986 | rspiocbq.iocb.ulpIoTag = irsp->ulpIoTag; |
| 987 | cmdiocbq = lpfc_sli_txcmpl_ring_iotag_lookup(phba, |
| 988 | pring, |
| 989 | &rspiocbq); |
| 990 | if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) { |
| 991 | spin_unlock_irqrestore( |
| 992 | phba->host->host_lock, iflag); |
| 993 | (cmdiocbq->iocb_cmpl)(phba, cmdiocbq, |
| 994 | &rspiocbq); |
| 995 | spin_lock_irqsave(phba->host->host_lock, |
| 996 | iflag); |
| 997 | } |
| 998 | break; |
| 999 | default: |
| 1000 | if (irsp->ulpCommand == CMD_ADAPTER_MSG) { |
| 1001 | char adaptermsg[LPFC_MAX_ADPTMSG]; |
| 1002 | memset(adaptermsg, 0, LPFC_MAX_ADPTMSG); |
| 1003 | memcpy(&adaptermsg[0], (uint8_t *) irsp, |
| 1004 | MAX_MSG_DATA); |
| 1005 | dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s", |
| 1006 | phba->brd_no, adaptermsg); |
| 1007 | } else { |
| 1008 | /* Unknown IOCB command */ |
| 1009 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| 1010 | "%d:0321 Unknown IOCB command " |
| 1011 | "Data: x%x, x%x x%x x%x x%x\n", |
| 1012 | phba->brd_no, type, irsp->ulpCommand, |
| 1013 | irsp->ulpStatus, irsp->ulpIoTag, |
| 1014 | irsp->ulpContext); |
| 1015 | } |
| 1016 | break; |
| 1017 | } |
| 1018 | |
| 1019 | /* |
| 1020 | * The response IOCB has been processed. Update the ring |
| 1021 | * pointer in SLIM. If the port response put pointer has not |
| 1022 | * been updated, sync the pgp->rspPutInx and fetch the new port |
| 1023 | * response put pointer. |
| 1024 | */ |
| 1025 | if (++pring->rspidx >= portRspMax) |
| 1026 | pring->rspidx = 0; |
| 1027 | |
| 1028 | to_slim = phba->MBslimaddr + |
| 1029 | (SLIMOFF + (pring->ringno * 2) + 1) * 4; |
| 1030 | writeb(pring->rspidx, to_slim); |
| 1031 | |
| 1032 | if (pring->rspidx == portRspPut) |
| 1033 | portRspPut = le32_to_cpu(pgp->rspPutInx); |
| 1034 | } |
| 1035 | |
| 1036 | if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) { |
| 1037 | pring->stats.iocb_rsp_full++; |
| 1038 | status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4)); |
| 1039 | writel(status, phba->CAregaddr); |
| 1040 | readl(phba->CAregaddr); |
| 1041 | } |
| 1042 | if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) { |
| 1043 | pring->flag &= ~LPFC_CALL_RING_AVAILABLE; |
| 1044 | pring->stats.iocb_cmd_empty++; |
| 1045 | |
| 1046 | /* Force update of the local copy of cmdGetInx */ |
| 1047 | pring->local_getidx = le32_to_cpu(pgp->cmdGetInx); |
| 1048 | lpfc_sli_resume_iocb(phba, pring); |
| 1049 | |
| 1050 | if ((pring->lpfc_sli_cmd_available)) |
| 1051 | (pring->lpfc_sli_cmd_available) (phba, pring); |
| 1052 | |
| 1053 | } |
| 1054 | |
| 1055 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1056 | return rc; |
| 1057 | } |
| 1058 | |
| 1059 | |
| 1060 | int |
| 1061 | lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, |
| 1062 | struct lpfc_sli_ring * pring, uint32_t mask) |
| 1063 | { |
| 1064 | IOCB_t *entry; |
| 1065 | IOCB_t *irsp = NULL; |
| 1066 | struct lpfc_iocbq *rspiocbp = NULL; |
| 1067 | struct lpfc_iocbq *next_iocb; |
| 1068 | struct lpfc_iocbq *cmdiocbp; |
| 1069 | struct lpfc_iocbq *saveq; |
| 1070 | struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list; |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1071 | struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1072 | uint8_t iocb_cmd_type; |
| 1073 | lpfc_iocb_type type; |
| 1074 | uint32_t status, free_saveq; |
| 1075 | uint32_t portRspPut, portRspMax; |
| 1076 | int rc = 1; |
| 1077 | unsigned long iflag; |
| 1078 | void __iomem *to_slim; |
| 1079 | |
| 1080 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1081 | pring->stats.iocb_event++; |
| 1082 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1083 | /* |
| 1084 | * The next available response entry should never exceed the maximum |
| 1085 | * entries. If it does, treat it as an adapter hardware error. |
| 1086 | */ |
| 1087 | portRspMax = pring->numRiocb; |
| 1088 | portRspPut = le32_to_cpu(pgp->rspPutInx); |
| 1089 | if (portRspPut >= portRspMax) { |
| 1090 | /* |
| 1091 | * Ring <ringno> handler: portRspPut <portRspPut> is bigger then |
| 1092 | * rsp ring <portRspMax> |
| 1093 | */ |
| 1094 | lpfc_printf_log(phba, |
| 1095 | KERN_ERR, |
| 1096 | LOG_SLI, |
| 1097 | "%d:0312 Ring %d handler: portRspPut %d " |
| 1098 | "is bigger then rsp ring %d\n", |
| 1099 | phba->brd_no, |
| 1100 | pring->ringno, portRspPut, portRspMax); |
| 1101 | |
| 1102 | phba->hba_state = LPFC_HBA_ERROR; |
| 1103 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1104 | |
| 1105 | phba->work_hs = HS_FFER3; |
| 1106 | lpfc_handle_eratt(phba); |
| 1107 | |
| 1108 | return 1; |
| 1109 | } |
| 1110 | |
| 1111 | rmb(); |
| 1112 | lpfc_iocb_list = &phba->lpfc_iocb_list; |
| 1113 | while (pring->rspidx != portRspPut) { |
| 1114 | /* |
| 1115 | * Build a completion list and call the appropriate handler. |
| 1116 | * The process is to get the next available response iocb, get |
| 1117 | * a free iocb from the list, copy the response data into the |
| 1118 | * free iocb, insert to the continuation list, and update the |
| 1119 | * next response index to slim. This process makes response |
| 1120 | * iocb's in the ring available to DMA as fast as possible but |
| 1121 | * pays a penalty for a copy operation. Since the iocb is |
| 1122 | * only 32 bytes, this penalty is considered small relative to |
| 1123 | * the PCI reads for register values and a slim write. When |
| 1124 | * the ulpLe field is set, the entire Command has been |
| 1125 | * received. |
| 1126 | */ |
| 1127 | entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx); |
| 1128 | list_remove_head(lpfc_iocb_list, rspiocbp, struct lpfc_iocbq, |
| 1129 | list); |
| 1130 | if (rspiocbp == NULL) { |
| 1131 | printk(KERN_ERR "%s: out of buffers! Failing " |
| 1132 | "completion.\n", __FUNCTION__); |
| 1133 | break; |
| 1134 | } |
| 1135 | |
| 1136 | lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb, sizeof (IOCB_t)); |
| 1137 | irsp = &rspiocbp->iocb; |
| 1138 | |
| 1139 | if (++pring->rspidx >= portRspMax) |
| 1140 | pring->rspidx = 0; |
| 1141 | |
| 1142 | to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2) |
| 1143 | + 1) * 4; |
| 1144 | writeb(pring->rspidx, to_slim); |
| 1145 | |
| 1146 | if (list_empty(&(pring->iocb_continueq))) { |
| 1147 | list_add(&rspiocbp->list, &(pring->iocb_continueq)); |
| 1148 | } else { |
| 1149 | list_add_tail(&rspiocbp->list, |
| 1150 | &(pring->iocb_continueq)); |
| 1151 | } |
| 1152 | |
| 1153 | pring->iocb_continueq_cnt++; |
| 1154 | if (irsp->ulpLe) { |
| 1155 | /* |
| 1156 | * By default, the driver expects to free all resources |
| 1157 | * associated with this iocb completion. |
| 1158 | */ |
| 1159 | free_saveq = 1; |
| 1160 | saveq = list_get_first(&pring->iocb_continueq, |
| 1161 | struct lpfc_iocbq, list); |
| 1162 | irsp = &(saveq->iocb); |
| 1163 | list_del_init(&pring->iocb_continueq); |
| 1164 | pring->iocb_continueq_cnt = 0; |
| 1165 | |
| 1166 | pring->stats.iocb_rsp++; |
| 1167 | |
| 1168 | if (irsp->ulpStatus) { |
| 1169 | /* Rsp ring <ringno> error: IOCB */ |
| 1170 | lpfc_printf_log(phba, |
| 1171 | KERN_WARNING, |
| 1172 | LOG_SLI, |
| 1173 | "%d:0328 Rsp Ring %d error: IOCB Data: " |
| 1174 | "x%x x%x x%x x%x x%x x%x x%x x%x\n", |
| 1175 | phba->brd_no, |
| 1176 | pring->ringno, |
| 1177 | irsp->un.ulpWord[0], |
| 1178 | irsp->un.ulpWord[1], |
| 1179 | irsp->un.ulpWord[2], |
| 1180 | irsp->un.ulpWord[3], |
| 1181 | irsp->un.ulpWord[4], |
| 1182 | irsp->un.ulpWord[5], |
| 1183 | *(((uint32_t *) irsp) + 6), |
| 1184 | *(((uint32_t *) irsp) + 7)); |
| 1185 | } |
| 1186 | |
| 1187 | /* |
| 1188 | * Fetch the IOCB command type and call the correct |
| 1189 | * completion routine. Solicited and Unsolicited |
| 1190 | * IOCBs on the ELS ring get freed back to the |
| 1191 | * lpfc_iocb_list by the discovery kernel thread. |
| 1192 | */ |
| 1193 | iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK; |
| 1194 | type = lpfc_sli_iocb_cmd_type(iocb_cmd_type); |
| 1195 | if (type == LPFC_SOL_IOCB) { |
| 1196 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1197 | iflag); |
| 1198 | rc = lpfc_sli_process_sol_iocb(phba, pring, |
| 1199 | saveq); |
| 1200 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1201 | } else if (type == LPFC_UNSOL_IOCB) { |
| 1202 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1203 | iflag); |
| 1204 | rc = lpfc_sli_process_unsol_iocb(phba, pring, |
| 1205 | saveq); |
| 1206 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1207 | } else if (type == LPFC_ABORT_IOCB) { |
| 1208 | if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) && |
| 1209 | ((cmdiocbp = |
| 1210 | lpfc_sli_txcmpl_ring_search_slow(pring, |
| 1211 | saveq)))) { |
| 1212 | /* Call the specified completion |
| 1213 | routine */ |
| 1214 | if (cmdiocbp->iocb_cmpl) { |
| 1215 | spin_unlock_irqrestore( |
| 1216 | phba->host->host_lock, |
| 1217 | iflag); |
| 1218 | (cmdiocbp->iocb_cmpl) (phba, |
| 1219 | cmdiocbp, saveq); |
| 1220 | spin_lock_irqsave( |
| 1221 | phba->host->host_lock, |
| 1222 | iflag); |
| 1223 | } else { |
| 1224 | list_add_tail(&cmdiocbp->list, |
| 1225 | lpfc_iocb_list); |
| 1226 | } |
| 1227 | } |
| 1228 | } else if (type == LPFC_UNKNOWN_IOCB) { |
| 1229 | if (irsp->ulpCommand == CMD_ADAPTER_MSG) { |
| 1230 | |
| 1231 | char adaptermsg[LPFC_MAX_ADPTMSG]; |
| 1232 | |
| 1233 | memset(adaptermsg, 0, |
| 1234 | LPFC_MAX_ADPTMSG); |
| 1235 | memcpy(&adaptermsg[0], (uint8_t *) irsp, |
| 1236 | MAX_MSG_DATA); |
| 1237 | dev_warn(&((phba->pcidev)->dev), |
| 1238 | "lpfc%d: %s", |
| 1239 | phba->brd_no, adaptermsg); |
| 1240 | } else { |
| 1241 | /* Unknown IOCB command */ |
| 1242 | lpfc_printf_log(phba, |
| 1243 | KERN_ERR, |
| 1244 | LOG_SLI, |
| 1245 | "%d:0321 Unknown IOCB command " |
| 1246 | "Data: x%x x%x x%x x%x\n", |
| 1247 | phba->brd_no, |
| 1248 | irsp->ulpCommand, |
| 1249 | irsp->ulpStatus, |
| 1250 | irsp->ulpIoTag, |
| 1251 | irsp->ulpContext); |
| 1252 | } |
| 1253 | } |
| 1254 | |
| 1255 | if (free_saveq) { |
| 1256 | if (!list_empty(&saveq->list)) { |
| 1257 | list_for_each_entry_safe(rspiocbp, |
| 1258 | next_iocb, |
| 1259 | &saveq->list, |
| 1260 | list) { |
| 1261 | list_add_tail(&rspiocbp->list, |
| 1262 | lpfc_iocb_list); |
| 1263 | } |
| 1264 | } |
| 1265 | |
| 1266 | list_add_tail(&saveq->list, lpfc_iocb_list); |
| 1267 | } |
| 1268 | } |
| 1269 | |
| 1270 | /* |
| 1271 | * If the port response put pointer has not been updated, sync |
| 1272 | * the pgp->rspPutInx in the MAILBOX_tand fetch the new port |
| 1273 | * response put pointer. |
| 1274 | */ |
| 1275 | if (pring->rspidx == portRspPut) { |
| 1276 | portRspPut = le32_to_cpu(pgp->rspPutInx); |
| 1277 | } |
| 1278 | } /* while (pring->rspidx != portRspPut) */ |
| 1279 | |
| 1280 | if ((rspiocbp != 0) && (mask & HA_R0RE_REQ)) { |
| 1281 | /* At least one response entry has been freed */ |
| 1282 | pring->stats.iocb_rsp_full++; |
| 1283 | /* SET RxRE_RSP in Chip Att register */ |
| 1284 | status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4)); |
| 1285 | writel(status, phba->CAregaddr); |
| 1286 | readl(phba->CAregaddr); /* flush */ |
| 1287 | } |
| 1288 | if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) { |
| 1289 | pring->flag &= ~LPFC_CALL_RING_AVAILABLE; |
| 1290 | pring->stats.iocb_cmd_empty++; |
| 1291 | |
| 1292 | /* Force update of the local copy of cmdGetInx */ |
| 1293 | pring->local_getidx = le32_to_cpu(pgp->cmdGetInx); |
| 1294 | lpfc_sli_resume_iocb(phba, pring); |
| 1295 | |
| 1296 | if ((pring->lpfc_sli_cmd_available)) |
| 1297 | (pring->lpfc_sli_cmd_available) (phba, pring); |
| 1298 | |
| 1299 | } |
| 1300 | |
| 1301 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1302 | return rc; |
| 1303 | } |
| 1304 | |
| 1305 | int |
| 1306 | lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) |
| 1307 | { |
| 1308 | struct lpfc_iocbq *iocb, *next_iocb; |
| 1309 | IOCB_t *icmd = NULL, *cmd = NULL; |
| 1310 | int errcnt; |
| 1311 | uint16_t iotag; |
| 1312 | |
| 1313 | errcnt = 0; |
| 1314 | |
| 1315 | /* Error everything on txq and txcmplq |
| 1316 | * First do the txq. |
| 1317 | */ |
| 1318 | spin_lock_irq(phba->host->host_lock); |
| 1319 | list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { |
| 1320 | list_del_init(&iocb->list); |
| 1321 | if (iocb->iocb_cmpl) { |
| 1322 | icmd = &iocb->iocb; |
| 1323 | icmd->ulpStatus = IOSTAT_LOCAL_REJECT; |
| 1324 | icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; |
| 1325 | spin_unlock_irq(phba->host->host_lock); |
| 1326 | (iocb->iocb_cmpl) (phba, iocb, iocb); |
| 1327 | spin_lock_irq(phba->host->host_lock); |
| 1328 | } else { |
| 1329 | list_add_tail(&iocb->list, &phba->lpfc_iocb_list); |
| 1330 | } |
| 1331 | } |
| 1332 | pring->txq_cnt = 0; |
| 1333 | INIT_LIST_HEAD(&(pring->txq)); |
| 1334 | |
| 1335 | /* Next issue ABTS for everything on the txcmplq */ |
| 1336 | list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { |
| 1337 | cmd = &iocb->iocb; |
| 1338 | |
| 1339 | /* |
| 1340 | * Imediate abort of IOCB, clear fast_lookup entry, |
| 1341 | * if any, deque and call compl |
| 1342 | */ |
| 1343 | iotag = cmd->ulpIoTag; |
| 1344 | if (iotag && pring->fast_lookup && |
| 1345 | (iotag < pring->fast_iotag)) |
| 1346 | pring->fast_lookup[iotag] = NULL; |
| 1347 | |
| 1348 | list_del_init(&iocb->list); |
| 1349 | pring->txcmplq_cnt--; |
| 1350 | |
| 1351 | if (iocb->iocb_cmpl) { |
| 1352 | cmd->ulpStatus = IOSTAT_LOCAL_REJECT; |
| 1353 | cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; |
| 1354 | spin_unlock_irq(phba->host->host_lock); |
| 1355 | (iocb->iocb_cmpl) (phba, iocb, iocb); |
| 1356 | spin_lock_irq(phba->host->host_lock); |
| 1357 | } else { |
| 1358 | list_add_tail(&iocb->list, &phba->lpfc_iocb_list); |
| 1359 | } |
| 1360 | } |
| 1361 | |
| 1362 | INIT_LIST_HEAD(&pring->txcmplq); |
| 1363 | pring->txcmplq_cnt = 0; |
| 1364 | spin_unlock_irq(phba->host->host_lock); |
| 1365 | |
| 1366 | return errcnt; |
| 1367 | } |
| 1368 | |
| 1369 | /****************************************************************************** |
| 1370 | * lpfc_sli_send_reset |
| 1371 | * |
| 1372 | * Note: After returning from this function, the HBA cannot be accessed for |
| 1373 | * 1 ms. Since we do not wish to delay in interrupt context, it is the |
| 1374 | * responsibility of the caller to perform the mdelay(1) and flush via readl(). |
| 1375 | ******************************************************************************/ |
| 1376 | static int |
| 1377 | lpfc_sli_send_reset(struct lpfc_hba * phba, uint16_t skip_post) |
| 1378 | { |
| 1379 | MAILBOX_t *swpmb; |
| 1380 | volatile uint32_t word0; |
| 1381 | void __iomem *to_slim; |
| 1382 | unsigned long flags = 0; |
| 1383 | |
| 1384 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 1385 | |
| 1386 | /* A board reset must use REAL SLIM. */ |
| 1387 | phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE; |
| 1388 | |
| 1389 | word0 = 0; |
| 1390 | swpmb = (MAILBOX_t *) & word0; |
| 1391 | swpmb->mbxCommand = MBX_RESTART; |
| 1392 | swpmb->mbxHc = 1; |
| 1393 | |
| 1394 | to_slim = phba->MBslimaddr; |
| 1395 | writel(*(uint32_t *) swpmb, to_slim); |
| 1396 | readl(to_slim); /* flush */ |
| 1397 | |
| 1398 | /* Only skip post after fc_ffinit is completed */ |
| 1399 | if (skip_post) { |
| 1400 | word0 = 1; /* This is really setting up word1 */ |
| 1401 | } else { |
| 1402 | word0 = 0; /* This is really setting up word1 */ |
| 1403 | } |
| 1404 | to_slim = phba->MBslimaddr + sizeof (uint32_t); |
| 1405 | writel(*(uint32_t *) swpmb, to_slim); |
| 1406 | readl(to_slim); /* flush */ |
| 1407 | |
| 1408 | /* Turn off parity checking and serr during the physical reset */ |
| 1409 | pci_read_config_word(phba->pcidev, PCI_COMMAND, &phba->pci_cfg_value); |
| 1410 | pci_write_config_word(phba->pcidev, PCI_COMMAND, |
| 1411 | (phba->pci_cfg_value & |
| 1412 | ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR))); |
| 1413 | |
| 1414 | writel(HC_INITFF, phba->HCregaddr); |
| 1415 | |
| 1416 | phba->hba_state = LPFC_INIT_START; |
| 1417 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 1418 | |
| 1419 | return 0; |
| 1420 | } |
| 1421 | |
| 1422 | static int |
| 1423 | lpfc_sli_brdreset(struct lpfc_hba * phba, uint16_t skip_post) |
| 1424 | { |
| 1425 | struct lpfc_sli_ring *pring; |
| 1426 | int i; |
| 1427 | struct lpfc_dmabuf *mp, *next_mp; |
| 1428 | unsigned long flags = 0; |
| 1429 | |
| 1430 | lpfc_sli_send_reset(phba, skip_post); |
| 1431 | mdelay(1); |
| 1432 | |
| 1433 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 1434 | /* Risk the write on flush case ie no delay after the readl */ |
| 1435 | readl(phba->HCregaddr); /* flush */ |
| 1436 | /* Now toggle INITFF bit set by lpfc_sli_send_reset */ |
| 1437 | writel(0, phba->HCregaddr); |
| 1438 | readl(phba->HCregaddr); /* flush */ |
| 1439 | |
| 1440 | /* Restore PCI cmd register */ |
| 1441 | pci_write_config_word(phba->pcidev, PCI_COMMAND, phba->pci_cfg_value); |
| 1442 | |
| 1443 | /* perform board reset */ |
| 1444 | phba->fc_eventTag = 0; |
| 1445 | phba->fc_myDID = 0; |
| 1446 | phba->fc_prevDID = Mask_DID; |
| 1447 | |
| 1448 | /* Reset HBA */ |
| 1449 | lpfc_printf_log(phba, |
| 1450 | KERN_INFO, |
| 1451 | LOG_SLI, |
| 1452 | "%d:0325 Reset HBA Data: x%x x%x x%x\n", |
| 1453 | phba->brd_no, |
| 1454 | phba->hba_state, |
| 1455 | phba->sli.sli_flag, |
| 1456 | skip_post); |
| 1457 | |
| 1458 | /* Initialize relevant SLI info */ |
| 1459 | for (i = 0; i < phba->sli.num_rings; i++) { |
| 1460 | pring = &phba->sli.ring[i]; |
| 1461 | pring->flag = 0; |
| 1462 | pring->rspidx = 0; |
| 1463 | pring->next_cmdidx = 0; |
| 1464 | pring->local_getidx = 0; |
| 1465 | pring->cmdidx = 0; |
| 1466 | pring->missbufcnt = 0; |
| 1467 | } |
| 1468 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 1469 | |
| 1470 | if (skip_post) { |
| 1471 | mdelay(100); |
| 1472 | } else { |
| 1473 | mdelay(2000); |
| 1474 | } |
| 1475 | |
| 1476 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 1477 | /* Cleanup preposted buffers on the ELS ring */ |
| 1478 | pring = &phba->sli.ring[LPFC_ELS_RING]; |
| 1479 | list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { |
| 1480 | list_del(&mp->list); |
| 1481 | pring->postbufq_cnt--; |
| 1482 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| 1483 | kfree(mp); |
| 1484 | } |
| 1485 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 1486 | |
| 1487 | for (i = 0; i < phba->sli.num_rings; i++) |
| 1488 | lpfc_sli_abort_iocb_ring(phba, &phba->sli.ring[i]); |
| 1489 | |
| 1490 | return 0; |
| 1491 | } |
| 1492 | |
| 1493 | static int |
| 1494 | lpfc_sli_chipset_init(struct lpfc_hba *phba) |
| 1495 | { |
| 1496 | uint32_t status, i = 0; |
| 1497 | |
| 1498 | /* Read the HBA Host Status Register */ |
| 1499 | status = readl(phba->HSregaddr); |
| 1500 | |
| 1501 | /* Check status register to see what current state is */ |
| 1502 | i = 0; |
| 1503 | while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) { |
| 1504 | |
| 1505 | /* Check every 100ms for 5 retries, then every 500ms for 5, then |
| 1506 | * every 2.5 sec for 5, then reset board and every 2.5 sec for |
| 1507 | * 4. |
| 1508 | */ |
| 1509 | if (i++ >= 20) { |
| 1510 | /* Adapter failed to init, timeout, status reg |
| 1511 | <status> */ |
| 1512 | lpfc_printf_log(phba, |
| 1513 | KERN_ERR, |
| 1514 | LOG_INIT, |
| 1515 | "%d:0436 Adapter failed to init, " |
| 1516 | "timeout, status reg x%x\n", |
| 1517 | phba->brd_no, |
| 1518 | status); |
| 1519 | phba->hba_state = LPFC_HBA_ERROR; |
| 1520 | return -ETIMEDOUT; |
| 1521 | } |
| 1522 | |
| 1523 | /* Check to see if any errors occurred during init */ |
| 1524 | if (status & HS_FFERM) { |
| 1525 | /* ERROR: During chipset initialization */ |
| 1526 | /* Adapter failed to init, chipset, status reg |
| 1527 | <status> */ |
| 1528 | lpfc_printf_log(phba, |
| 1529 | KERN_ERR, |
| 1530 | LOG_INIT, |
| 1531 | "%d:0437 Adapter failed to init, " |
| 1532 | "chipset, status reg x%x\n", |
| 1533 | phba->brd_no, |
| 1534 | status); |
| 1535 | phba->hba_state = LPFC_HBA_ERROR; |
| 1536 | return -EIO; |
| 1537 | } |
| 1538 | |
| 1539 | if (i <= 5) { |
| 1540 | msleep(10); |
| 1541 | } else if (i <= 10) { |
| 1542 | msleep(500); |
| 1543 | } else { |
| 1544 | msleep(2500); |
| 1545 | } |
| 1546 | |
| 1547 | if (i == 15) { |
| 1548 | lpfc_sli_brdreset(phba, 0); |
| 1549 | } |
| 1550 | /* Read the HBA Host Status Register */ |
| 1551 | status = readl(phba->HSregaddr); |
| 1552 | } |
| 1553 | |
| 1554 | /* Check to see if any errors occurred during init */ |
| 1555 | if (status & HS_FFERM) { |
| 1556 | /* ERROR: During chipset initialization */ |
| 1557 | /* Adapter failed to init, chipset, status reg <status> */ |
| 1558 | lpfc_printf_log(phba, |
| 1559 | KERN_ERR, |
| 1560 | LOG_INIT, |
| 1561 | "%d:0438 Adapter failed to init, chipset, " |
| 1562 | "status reg x%x\n", |
| 1563 | phba->brd_no, |
| 1564 | status); |
| 1565 | phba->hba_state = LPFC_HBA_ERROR; |
| 1566 | return -EIO; |
| 1567 | } |
| 1568 | |
| 1569 | /* Clear all interrupt enable conditions */ |
| 1570 | writel(0, phba->HCregaddr); |
| 1571 | readl(phba->HCregaddr); /* flush */ |
| 1572 | |
| 1573 | /* setup host attn register */ |
| 1574 | writel(0xffffffff, phba->HAregaddr); |
| 1575 | readl(phba->HAregaddr); /* flush */ |
| 1576 | return 0; |
| 1577 | } |
| 1578 | |
| 1579 | int |
| 1580 | lpfc_sli_hba_setup(struct lpfc_hba * phba) |
| 1581 | { |
| 1582 | LPFC_MBOXQ_t *pmb; |
| 1583 | uint32_t resetcount = 0, rc = 0, done = 0; |
| 1584 | |
| 1585 | pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| 1586 | if (!pmb) { |
| 1587 | phba->hba_state = LPFC_HBA_ERROR; |
| 1588 | return -ENOMEM; |
| 1589 | } |
| 1590 | |
| 1591 | while (resetcount < 2 && !done) { |
| 1592 | phba->hba_state = 0; |
| 1593 | lpfc_sli_brdreset(phba, 0); |
| 1594 | msleep(2500); |
| 1595 | rc = lpfc_sli_chipset_init(phba); |
| 1596 | if (rc) |
| 1597 | break; |
| 1598 | |
| 1599 | resetcount++; |
| 1600 | |
| 1601 | /* Call pre CONFIG_PORT mailbox command initialization. A value of 0 |
| 1602 | * means the call was successful. Any other nonzero value is a failure, |
| 1603 | * but if ERESTART is returned, the driver may reset the HBA and try |
| 1604 | * again. |
| 1605 | */ |
| 1606 | rc = lpfc_config_port_prep(phba); |
| 1607 | if (rc == -ERESTART) { |
| 1608 | phba->hba_state = 0; |
| 1609 | continue; |
| 1610 | } else if (rc) { |
| 1611 | break; |
| 1612 | } |
| 1613 | |
| 1614 | phba->hba_state = LPFC_INIT_MBX_CMDS; |
| 1615 | lpfc_config_port(phba, pmb); |
| 1616 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 1617 | if (rc == MBX_SUCCESS) |
| 1618 | done = 1; |
| 1619 | else { |
| 1620 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 1621 | "%d:0442 Adapter failed to init, mbxCmd x%x " |
| 1622 | "CONFIG_PORT, mbxStatus x%x Data: x%x\n", |
| 1623 | phba->brd_no, pmb->mb.mbxCommand, |
| 1624 | pmb->mb.mbxStatus, 0); |
| 1625 | phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE; |
| 1626 | } |
| 1627 | } |
| 1628 | if (!done) |
| 1629 | goto lpfc_sli_hba_setup_error; |
| 1630 | |
| 1631 | rc = lpfc_sli_ring_map(phba, pmb); |
| 1632 | |
| 1633 | if (rc) |
| 1634 | goto lpfc_sli_hba_setup_error; |
| 1635 | |
| 1636 | phba->sli.sli_flag |= LPFC_PROCESS_LA; |
| 1637 | |
| 1638 | rc = lpfc_config_port_post(phba); |
| 1639 | if (rc) |
| 1640 | goto lpfc_sli_hba_setup_error; |
| 1641 | |
| 1642 | goto lpfc_sli_hba_setup_exit; |
| 1643 | lpfc_sli_hba_setup_error: |
| 1644 | phba->hba_state = LPFC_HBA_ERROR; |
| 1645 | lpfc_sli_hba_setup_exit: |
| 1646 | mempool_free(pmb, phba->mbox_mem_pool); |
| 1647 | return rc; |
| 1648 | } |
| 1649 | |
| 1650 | static void |
| 1651 | lpfc_mbox_abort(struct lpfc_hba * phba) |
| 1652 | { |
| 1653 | LPFC_MBOXQ_t *pmbox; |
| 1654 | MAILBOX_t *mb; |
| 1655 | |
| 1656 | if (phba->sli.mbox_active) { |
| 1657 | del_timer_sync(&phba->sli.mbox_tmo); |
| 1658 | phba->work_hba_events &= ~WORKER_MBOX_TMO; |
| 1659 | pmbox = phba->sli.mbox_active; |
| 1660 | mb = &pmbox->mb; |
| 1661 | phba->sli.mbox_active = NULL; |
| 1662 | if (pmbox->mbox_cmpl) { |
| 1663 | mb->mbxStatus = MBX_NOT_FINISHED; |
| 1664 | (pmbox->mbox_cmpl) (phba, pmbox); |
| 1665 | } |
| 1666 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 1667 | } |
| 1668 | |
| 1669 | /* Abort all the non active mailbox commands. */ |
| 1670 | spin_lock_irq(phba->host->host_lock); |
| 1671 | pmbox = lpfc_mbox_get(phba); |
| 1672 | while (pmbox) { |
| 1673 | mb = &pmbox->mb; |
| 1674 | if (pmbox->mbox_cmpl) { |
| 1675 | mb->mbxStatus = MBX_NOT_FINISHED; |
| 1676 | spin_unlock_irq(phba->host->host_lock); |
| 1677 | (pmbox->mbox_cmpl) (phba, pmbox); |
| 1678 | spin_lock_irq(phba->host->host_lock); |
| 1679 | } |
| 1680 | pmbox = lpfc_mbox_get(phba); |
| 1681 | } |
| 1682 | spin_unlock_irq(phba->host->host_lock); |
| 1683 | return; |
| 1684 | } |
| 1685 | |
| 1686 | /*! lpfc_mbox_timeout |
| 1687 | * |
| 1688 | * \pre |
| 1689 | * \post |
| 1690 | * \param hba Pointer to per struct lpfc_hba structure |
| 1691 | * \param l1 Pointer to the driver's mailbox queue. |
| 1692 | * \return |
| 1693 | * void |
| 1694 | * |
| 1695 | * \b Description: |
| 1696 | * |
| 1697 | * This routine handles mailbox timeout events at timer interrupt context. |
| 1698 | */ |
| 1699 | void |
| 1700 | lpfc_mbox_timeout(unsigned long ptr) |
| 1701 | { |
| 1702 | struct lpfc_hba *phba; |
| 1703 | unsigned long iflag; |
| 1704 | |
| 1705 | phba = (struct lpfc_hba *)ptr; |
| 1706 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1707 | if (!(phba->work_hba_events & WORKER_MBOX_TMO)) { |
| 1708 | phba->work_hba_events |= WORKER_MBOX_TMO; |
| 1709 | if (phba->work_wait) |
| 1710 | wake_up(phba->work_wait); |
| 1711 | } |
| 1712 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1713 | } |
| 1714 | |
| 1715 | void |
| 1716 | lpfc_mbox_timeout_handler(struct lpfc_hba *phba) |
| 1717 | { |
| 1718 | LPFC_MBOXQ_t *pmbox; |
| 1719 | MAILBOX_t *mb; |
| 1720 | |
| 1721 | spin_lock_irq(phba->host->host_lock); |
| 1722 | if (!(phba->work_hba_events & WORKER_MBOX_TMO)) { |
| 1723 | spin_unlock_irq(phba->host->host_lock); |
| 1724 | return; |
| 1725 | } |
| 1726 | |
| 1727 | pmbox = phba->sli.mbox_active; |
| 1728 | mb = &pmbox->mb; |
| 1729 | |
| 1730 | /* Mbox cmd <mbxCommand> timeout */ |
| 1731 | lpfc_printf_log(phba, |
| 1732 | KERN_ERR, |
| 1733 | LOG_MBOX | LOG_SLI, |
| 1734 | "%d:0310 Mailbox command x%x timeout Data: x%x x%x x%p\n", |
| 1735 | phba->brd_no, |
| 1736 | mb->mbxCommand, |
| 1737 | phba->hba_state, |
| 1738 | phba->sli.sli_flag, |
| 1739 | phba->sli.mbox_active); |
| 1740 | |
| 1741 | if (phba->sli.mbox_active == pmbox) { |
| 1742 | phba->sli.mbox_active = NULL; |
| 1743 | if (pmbox->mbox_cmpl) { |
| 1744 | mb->mbxStatus = MBX_NOT_FINISHED; |
| 1745 | spin_unlock_irq(phba->host->host_lock); |
| 1746 | (pmbox->mbox_cmpl) (phba, pmbox); |
| 1747 | spin_lock_irq(phba->host->host_lock); |
| 1748 | } |
| 1749 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 1750 | } |
| 1751 | |
| 1752 | spin_unlock_irq(phba->host->host_lock); |
| 1753 | lpfc_mbox_abort(phba); |
| 1754 | return; |
| 1755 | } |
| 1756 | |
| 1757 | int |
| 1758 | lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) |
| 1759 | { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1760 | MAILBOX_t *mb; |
| 1761 | struct lpfc_sli *psli; |
| 1762 | uint32_t status, evtctr; |
| 1763 | uint32_t ha_copy; |
| 1764 | int i; |
| 1765 | unsigned long drvr_flag = 0; |
| 1766 | volatile uint32_t word0, ldata; |
| 1767 | void __iomem *to_slim; |
| 1768 | |
| 1769 | psli = &phba->sli; |
| 1770 | |
| 1771 | spin_lock_irqsave(phba->host->host_lock, drvr_flag); |
| 1772 | |
| 1773 | |
| 1774 | mb = &pmbox->mb; |
| 1775 | status = MBX_SUCCESS; |
| 1776 | |
| 1777 | if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) { |
| 1778 | /* Polling for a mbox command when another one is already active |
| 1779 | * is not allowed in SLI. Also, the driver must have established |
| 1780 | * SLI2 mode to queue and process multiple mbox commands. |
| 1781 | */ |
| 1782 | |
| 1783 | if (flag & MBX_POLL) { |
| 1784 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1785 | drvr_flag); |
| 1786 | |
| 1787 | /* Mbox command <mbxCommand> cannot issue */ |
| 1788 | LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) |
| 1789 | return (MBX_NOT_FINISHED); |
| 1790 | } |
| 1791 | |
| 1792 | if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) { |
| 1793 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1794 | drvr_flag); |
| 1795 | /* Mbox command <mbxCommand> cannot issue */ |
| 1796 | LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) |
| 1797 | return (MBX_NOT_FINISHED); |
| 1798 | } |
| 1799 | |
| 1800 | /* Handle STOP IOCB processing flag. This is only meaningful |
| 1801 | * if we are not polling for mbox completion. |
| 1802 | */ |
| 1803 | if (flag & MBX_STOP_IOCB) { |
| 1804 | flag &= ~MBX_STOP_IOCB; |
| 1805 | /* Now flag each ring */ |
| 1806 | for (i = 0; i < psli->num_rings; i++) { |
| 1807 | /* If the ring is active, flag it */ |
| 1808 | if (psli->ring[i].cmdringaddr) { |
| 1809 | psli->ring[i].flag |= |
| 1810 | LPFC_STOP_IOCB_MBX; |
| 1811 | } |
| 1812 | } |
| 1813 | } |
| 1814 | |
| 1815 | /* Another mailbox command is still being processed, queue this |
| 1816 | * command to be processed later. |
| 1817 | */ |
| 1818 | lpfc_mbox_put(phba, pmbox); |
| 1819 | |
| 1820 | /* Mbox cmd issue - BUSY */ |
| 1821 | lpfc_printf_log(phba, |
| 1822 | KERN_INFO, |
| 1823 | LOG_MBOX | LOG_SLI, |
| 1824 | "%d:0308 Mbox cmd issue - BUSY Data: x%x x%x x%x x%x\n", |
| 1825 | phba->brd_no, |
| 1826 | mb->mbxCommand, |
| 1827 | phba->hba_state, |
| 1828 | psli->sli_flag, |
| 1829 | flag); |
| 1830 | |
| 1831 | psli->slistat.mbox_busy++; |
| 1832 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1833 | drvr_flag); |
| 1834 | |
| 1835 | return (MBX_BUSY); |
| 1836 | } |
| 1837 | |
| 1838 | /* Handle STOP IOCB processing flag. This is only meaningful |
| 1839 | * if we are not polling for mbox completion. |
| 1840 | */ |
| 1841 | if (flag & MBX_STOP_IOCB) { |
| 1842 | flag &= ~MBX_STOP_IOCB; |
| 1843 | if (flag == MBX_NOWAIT) { |
| 1844 | /* Now flag each ring */ |
| 1845 | for (i = 0; i < psli->num_rings; i++) { |
| 1846 | /* If the ring is active, flag it */ |
| 1847 | if (psli->ring[i].cmdringaddr) { |
| 1848 | psli->ring[i].flag |= |
| 1849 | LPFC_STOP_IOCB_MBX; |
| 1850 | } |
| 1851 | } |
| 1852 | } |
| 1853 | } |
| 1854 | |
| 1855 | psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE; |
| 1856 | |
| 1857 | /* If we are not polling, we MUST be in SLI2 mode */ |
| 1858 | if (flag != MBX_POLL) { |
| 1859 | if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) { |
| 1860 | psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 1861 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1862 | drvr_flag); |
| 1863 | /* Mbox command <mbxCommand> cannot issue */ |
| 1864 | LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag); |
| 1865 | return (MBX_NOT_FINISHED); |
| 1866 | } |
| 1867 | /* timeout active mbox command */ |
| 1868 | mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO); |
| 1869 | } |
| 1870 | |
| 1871 | /* Mailbox cmd <cmd> issue */ |
| 1872 | lpfc_printf_log(phba, |
| 1873 | KERN_INFO, |
| 1874 | LOG_MBOX | LOG_SLI, |
| 1875 | "%d:0309 Mailbox cmd x%x issue Data: x%x x%x x%x\n", |
| 1876 | phba->brd_no, |
| 1877 | mb->mbxCommand, |
| 1878 | phba->hba_state, |
| 1879 | psli->sli_flag, |
| 1880 | flag); |
| 1881 | |
| 1882 | psli->slistat.mbox_cmd++; |
| 1883 | evtctr = psli->slistat.mbox_event; |
| 1884 | |
| 1885 | /* next set own bit for the adapter and copy over command word */ |
| 1886 | mb->mbxOwner = OWN_CHIP; |
| 1887 | |
| 1888 | if (psli->sli_flag & LPFC_SLI2_ACTIVE) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1889 | /* First copy command data to host SLIM area */ |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1890 | lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1891 | } else { |
| 1892 | if (mb->mbxCommand == MBX_CONFIG_PORT) { |
| 1893 | /* copy command data into host mbox for cmpl */ |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1894 | lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, |
| 1895 | MAILBOX_CMD_SIZE); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1896 | } |
| 1897 | |
| 1898 | /* First copy mbox command data to HBA SLIM, skip past first |
| 1899 | word */ |
| 1900 | to_slim = phba->MBslimaddr + sizeof (uint32_t); |
| 1901 | lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0], |
| 1902 | MAILBOX_CMD_SIZE - sizeof (uint32_t)); |
| 1903 | |
| 1904 | /* Next copy over first word, with mbxOwner set */ |
| 1905 | ldata = *((volatile uint32_t *)mb); |
| 1906 | to_slim = phba->MBslimaddr; |
| 1907 | writel(ldata, to_slim); |
| 1908 | readl(to_slim); /* flush */ |
| 1909 | |
| 1910 | if (mb->mbxCommand == MBX_CONFIG_PORT) { |
| 1911 | /* switch over to host mailbox */ |
| 1912 | psli->sli_flag |= LPFC_SLI2_ACTIVE; |
| 1913 | } |
| 1914 | } |
| 1915 | |
| 1916 | wmb(); |
| 1917 | /* interrupt board to doit right away */ |
| 1918 | writel(CA_MBATT, phba->CAregaddr); |
| 1919 | readl(phba->CAregaddr); /* flush */ |
| 1920 | |
| 1921 | switch (flag) { |
| 1922 | case MBX_NOWAIT: |
| 1923 | /* Don't wait for it to finish, just return */ |
| 1924 | psli->mbox_active = pmbox; |
| 1925 | break; |
| 1926 | |
| 1927 | case MBX_POLL: |
| 1928 | i = 0; |
| 1929 | psli->mbox_active = NULL; |
| 1930 | if (psli->sli_flag & LPFC_SLI2_ACTIVE) { |
| 1931 | /* First read mbox status word */ |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1932 | word0 = *((volatile uint32_t *)&phba->slim2p->mbx); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1933 | word0 = le32_to_cpu(word0); |
| 1934 | } else { |
| 1935 | /* First read mbox status word */ |
| 1936 | word0 = readl(phba->MBslimaddr); |
| 1937 | } |
| 1938 | |
| 1939 | /* Read the HBA Host Attention Register */ |
| 1940 | ha_copy = readl(phba->HAregaddr); |
| 1941 | |
| 1942 | /* Wait for command to complete */ |
| 1943 | while (((word0 & OWN_CHIP) == OWN_CHIP) |
| 1944 | || !(ha_copy & HA_MBATT)) { |
| 1945 | if (i++ >= 100) { |
| 1946 | psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 1947 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1948 | drvr_flag); |
| 1949 | return (MBX_NOT_FINISHED); |
| 1950 | } |
| 1951 | |
| 1952 | /* Check if we took a mbox interrupt while we were |
| 1953 | polling */ |
| 1954 | if (((word0 & OWN_CHIP) != OWN_CHIP) |
| 1955 | && (evtctr != psli->slistat.mbox_event)) |
| 1956 | break; |
| 1957 | |
| 1958 | spin_unlock_irqrestore(phba->host->host_lock, |
| 1959 | drvr_flag); |
| 1960 | |
| 1961 | /* Can be in interrupt context, do not sleep */ |
| 1962 | /* (or might be called with interrupts disabled) */ |
| 1963 | mdelay(i); |
| 1964 | |
| 1965 | spin_lock_irqsave(phba->host->host_lock, drvr_flag); |
| 1966 | |
| 1967 | if (psli->sli_flag & LPFC_SLI2_ACTIVE) { |
| 1968 | /* First copy command data */ |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1969 | word0 = *((volatile uint32_t *) |
| 1970 | &phba->slim2p->mbx); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1971 | word0 = le32_to_cpu(word0); |
| 1972 | if (mb->mbxCommand == MBX_CONFIG_PORT) { |
| 1973 | MAILBOX_t *slimmb; |
| 1974 | volatile uint32_t slimword0; |
| 1975 | /* Check real SLIM for any errors */ |
| 1976 | slimword0 = readl(phba->MBslimaddr); |
| 1977 | slimmb = (MAILBOX_t *) & slimword0; |
| 1978 | if (((slimword0 & OWN_CHIP) != OWN_CHIP) |
| 1979 | && slimmb->mbxStatus) { |
| 1980 | psli->sli_flag &= |
| 1981 | ~LPFC_SLI2_ACTIVE; |
| 1982 | word0 = slimword0; |
| 1983 | } |
| 1984 | } |
| 1985 | } else { |
| 1986 | /* First copy command data */ |
| 1987 | word0 = readl(phba->MBslimaddr); |
| 1988 | } |
| 1989 | /* Read the HBA Host Attention Register */ |
| 1990 | ha_copy = readl(phba->HAregaddr); |
| 1991 | } |
| 1992 | |
| 1993 | if (psli->sli_flag & LPFC_SLI2_ACTIVE) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1994 | /* copy results back to user */ |
James.Smart@Emulex.Com | 4cc2da1 | 2005-06-25 10:34:00 -0400 | [diff] [blame^] | 1995 | lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb, |
| 1996 | MAILBOX_CMD_SIZE); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1997 | } else { |
| 1998 | /* First copy command data */ |
| 1999 | lpfc_memcpy_from_slim(mb, phba->MBslimaddr, |
| 2000 | MAILBOX_CMD_SIZE); |
| 2001 | if ((mb->mbxCommand == MBX_DUMP_MEMORY) && |
| 2002 | pmbox->context2) { |
| 2003 | lpfc_memcpy_from_slim((void *)pmbox->context2, |
| 2004 | phba->MBslimaddr + DMP_RSP_OFFSET, |
| 2005 | mb->un.varDmp.word_cnt); |
| 2006 | } |
| 2007 | } |
| 2008 | |
| 2009 | writel(HA_MBATT, phba->HAregaddr); |
| 2010 | readl(phba->HAregaddr); /* flush */ |
| 2011 | |
| 2012 | psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 2013 | status = mb->mbxStatus; |
| 2014 | } |
| 2015 | |
| 2016 | spin_unlock_irqrestore(phba->host->host_lock, drvr_flag); |
| 2017 | return (status); |
| 2018 | } |
| 2019 | |
| 2020 | static int |
| 2021 | lpfc_sli_ringtx_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, |
| 2022 | struct lpfc_iocbq * piocb) |
| 2023 | { |
| 2024 | /* Insert the caller's iocb in the txq tail for later processing. */ |
| 2025 | list_add_tail(&piocb->list, &pring->txq); |
| 2026 | pring->txq_cnt++; |
| 2027 | return (0); |
| 2028 | } |
| 2029 | |
| 2030 | static struct lpfc_iocbq * |
| 2031 | lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 2032 | struct lpfc_iocbq ** piocb) |
| 2033 | { |
| 2034 | struct lpfc_iocbq * nextiocb; |
| 2035 | |
| 2036 | nextiocb = lpfc_sli_ringtx_get(phba, pring); |
| 2037 | if (!nextiocb) { |
| 2038 | nextiocb = *piocb; |
| 2039 | *piocb = NULL; |
| 2040 | } |
| 2041 | |
| 2042 | return nextiocb; |
| 2043 | } |
| 2044 | |
| 2045 | int |
| 2046 | lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 2047 | struct lpfc_iocbq *piocb, uint32_t flag) |
| 2048 | { |
| 2049 | struct lpfc_iocbq *nextiocb; |
| 2050 | IOCB_t *iocb; |
| 2051 | |
| 2052 | /* |
| 2053 | * We should never get an IOCB if we are in a < LINK_DOWN state |
| 2054 | */ |
| 2055 | if (unlikely(phba->hba_state < LPFC_LINK_DOWN)) |
| 2056 | return IOCB_ERROR; |
| 2057 | |
| 2058 | /* |
| 2059 | * Check to see if we are blocking IOCB processing because of a |
| 2060 | * outstanding mbox command. |
| 2061 | */ |
| 2062 | if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX)) |
| 2063 | goto iocb_busy; |
| 2064 | |
| 2065 | if (unlikely(phba->hba_state == LPFC_LINK_DOWN)) { |
| 2066 | /* |
| 2067 | * Only CREATE_XRI, CLOSE_XRI, ABORT_XRI, and QUE_RING_BUF |
| 2068 | * can be issued if the link is not up. |
| 2069 | */ |
| 2070 | switch (piocb->iocb.ulpCommand) { |
| 2071 | case CMD_QUE_RING_BUF_CN: |
| 2072 | case CMD_QUE_RING_BUF64_CN: |
| 2073 | case CMD_CLOSE_XRI_CN: |
| 2074 | case CMD_ABORT_XRI_CN: |
| 2075 | /* |
| 2076 | * For IOCBs, like QUE_RING_BUF, that have no rsp ring |
| 2077 | * completion, iocb_cmpl MUST be 0. |
| 2078 | */ |
| 2079 | if (piocb->iocb_cmpl) |
| 2080 | piocb->iocb_cmpl = NULL; |
| 2081 | /*FALLTHROUGH*/ |
| 2082 | case CMD_CREATE_XRI_CR: |
| 2083 | break; |
| 2084 | default: |
| 2085 | goto iocb_busy; |
| 2086 | } |
| 2087 | |
| 2088 | /* |
| 2089 | * For FCP commands, we must be in a state where we can process link |
| 2090 | * attention events. |
| 2091 | */ |
| 2092 | } else if (unlikely(pring->ringno == phba->sli.fcp_ring && |
| 2093 | !(phba->sli.sli_flag & LPFC_PROCESS_LA))) |
| 2094 | goto iocb_busy; |
| 2095 | |
| 2096 | /* |
| 2097 | * Check to see if this is a high priority command. |
| 2098 | * If so bypass tx queue processing. |
| 2099 | */ |
| 2100 | if (unlikely((flag & SLI_IOCB_HIGH_PRIORITY) && |
| 2101 | (iocb = lpfc_sli_next_iocb_slot(phba, pring)))) { |
| 2102 | lpfc_sli_submit_iocb(phba, pring, iocb, piocb); |
| 2103 | piocb = NULL; |
| 2104 | } |
| 2105 | |
| 2106 | while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) && |
| 2107 | (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb))) |
| 2108 | lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb); |
| 2109 | |
| 2110 | if (iocb) |
| 2111 | lpfc_sli_update_ring(phba, pring); |
| 2112 | else |
| 2113 | lpfc_sli_update_full_ring(phba, pring); |
| 2114 | |
| 2115 | if (!piocb) |
| 2116 | return IOCB_SUCCESS; |
| 2117 | |
| 2118 | goto out_busy; |
| 2119 | |
| 2120 | iocb_busy: |
| 2121 | pring->stats.iocb_cmd_delay++; |
| 2122 | |
| 2123 | out_busy: |
| 2124 | |
| 2125 | if (!(flag & SLI_IOCB_RET_IOCB)) { |
| 2126 | lpfc_sli_ringtx_put(phba, pring, piocb); |
| 2127 | return IOCB_SUCCESS; |
| 2128 | } |
| 2129 | |
| 2130 | return IOCB_BUSY; |
| 2131 | } |
| 2132 | |
| 2133 | int |
| 2134 | lpfc_sli_setup(struct lpfc_hba *phba) |
| 2135 | { |
| 2136 | int i, totiocb = 0; |
| 2137 | struct lpfc_sli *psli = &phba->sli; |
| 2138 | struct lpfc_sli_ring *pring; |
| 2139 | |
| 2140 | psli->num_rings = MAX_CONFIGURED_RINGS; |
| 2141 | psli->sli_flag = 0; |
| 2142 | psli->fcp_ring = LPFC_FCP_RING; |
| 2143 | psli->next_ring = LPFC_FCP_NEXT_RING; |
| 2144 | psli->ip_ring = LPFC_IP_RING; |
| 2145 | |
| 2146 | for (i = 0; i < psli->num_rings; i++) { |
| 2147 | pring = &psli->ring[i]; |
| 2148 | switch (i) { |
| 2149 | case LPFC_FCP_RING: /* ring 0 - FCP */ |
| 2150 | /* numCiocb and numRiocb are used in config_port */ |
| 2151 | pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES; |
| 2152 | pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES; |
| 2153 | pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES; |
| 2154 | pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES; |
| 2155 | pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES; |
| 2156 | pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES; |
| 2157 | pring->iotag_ctr = 0; |
| 2158 | pring->iotag_max = |
| 2159 | (phba->cfg_hba_queue_depth * 2); |
| 2160 | pring->fast_iotag = pring->iotag_max; |
| 2161 | pring->num_mask = 0; |
| 2162 | break; |
| 2163 | case LPFC_IP_RING: /* ring 1 - IP */ |
| 2164 | /* numCiocb and numRiocb are used in config_port */ |
| 2165 | pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES; |
| 2166 | pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES; |
| 2167 | pring->num_mask = 0; |
| 2168 | break; |
| 2169 | case LPFC_ELS_RING: /* ring 2 - ELS / CT */ |
| 2170 | /* numCiocb and numRiocb are used in config_port */ |
| 2171 | pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES; |
| 2172 | pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES; |
| 2173 | pring->fast_iotag = 0; |
| 2174 | pring->iotag_ctr = 0; |
| 2175 | pring->iotag_max = 4096; |
| 2176 | pring->num_mask = 4; |
| 2177 | pring->prt[0].profile = 0; /* Mask 0 */ |
| 2178 | pring->prt[0].rctl = FC_ELS_REQ; |
| 2179 | pring->prt[0].type = FC_ELS_DATA; |
| 2180 | pring->prt[0].lpfc_sli_rcv_unsol_event = |
| 2181 | lpfc_els_unsol_event; |
| 2182 | pring->prt[1].profile = 0; /* Mask 1 */ |
| 2183 | pring->prt[1].rctl = FC_ELS_RSP; |
| 2184 | pring->prt[1].type = FC_ELS_DATA; |
| 2185 | pring->prt[1].lpfc_sli_rcv_unsol_event = |
| 2186 | lpfc_els_unsol_event; |
| 2187 | pring->prt[2].profile = 0; /* Mask 2 */ |
| 2188 | /* NameServer Inquiry */ |
| 2189 | pring->prt[2].rctl = FC_UNSOL_CTL; |
| 2190 | /* NameServer */ |
| 2191 | pring->prt[2].type = FC_COMMON_TRANSPORT_ULP; |
| 2192 | pring->prt[2].lpfc_sli_rcv_unsol_event = |
| 2193 | lpfc_ct_unsol_event; |
| 2194 | pring->prt[3].profile = 0; /* Mask 3 */ |
| 2195 | /* NameServer response */ |
| 2196 | pring->prt[3].rctl = FC_SOL_CTL; |
| 2197 | /* NameServer */ |
| 2198 | pring->prt[3].type = FC_COMMON_TRANSPORT_ULP; |
| 2199 | pring->prt[3].lpfc_sli_rcv_unsol_event = |
| 2200 | lpfc_ct_unsol_event; |
| 2201 | break; |
| 2202 | } |
| 2203 | totiocb += (pring->numCiocb + pring->numRiocb); |
| 2204 | } |
| 2205 | if (totiocb > MAX_SLI2_IOCB) { |
| 2206 | /* Too many cmd / rsp ring entries in SLI2 SLIM */ |
| 2207 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 2208 | "%d:0462 Too many cmd / rsp ring entries in " |
| 2209 | "SLI2 SLIM Data: x%x x%x\n", |
| 2210 | phba->brd_no, totiocb, MAX_SLI2_IOCB); |
| 2211 | } |
| 2212 | |
| 2213 | return 0; |
| 2214 | } |
| 2215 | |
| 2216 | int |
| 2217 | lpfc_sli_queue_setup(struct lpfc_hba * phba) |
| 2218 | { |
| 2219 | struct lpfc_sli *psli; |
| 2220 | struct lpfc_sli_ring *pring; |
| 2221 | int i, cnt; |
| 2222 | |
| 2223 | psli = &phba->sli; |
| 2224 | spin_lock_irq(phba->host->host_lock); |
| 2225 | INIT_LIST_HEAD(&psli->mboxq); |
| 2226 | /* Initialize list headers for txq and txcmplq as double linked lists */ |
| 2227 | for (i = 0; i < psli->num_rings; i++) { |
| 2228 | pring = &psli->ring[i]; |
| 2229 | pring->ringno = i; |
| 2230 | pring->next_cmdidx = 0; |
| 2231 | pring->local_getidx = 0; |
| 2232 | pring->cmdidx = 0; |
| 2233 | INIT_LIST_HEAD(&pring->txq); |
| 2234 | INIT_LIST_HEAD(&pring->txcmplq); |
| 2235 | INIT_LIST_HEAD(&pring->iocb_continueq); |
| 2236 | INIT_LIST_HEAD(&pring->postbufq); |
| 2237 | cnt = pring->fast_iotag; |
| 2238 | spin_unlock_irq(phba->host->host_lock); |
| 2239 | if (cnt) { |
| 2240 | pring->fast_lookup = |
| 2241 | kmalloc(cnt * sizeof (struct lpfc_iocbq *), |
| 2242 | GFP_KERNEL); |
| 2243 | if (pring->fast_lookup == 0) { |
| 2244 | return (0); |
| 2245 | } |
| 2246 | memset((char *)pring->fast_lookup, 0, |
| 2247 | cnt * sizeof (struct lpfc_iocbq *)); |
| 2248 | } |
| 2249 | spin_lock_irq(phba->host->host_lock); |
| 2250 | } |
| 2251 | spin_unlock_irq(phba->host->host_lock); |
| 2252 | return (1); |
| 2253 | } |
| 2254 | |
| 2255 | int |
| 2256 | lpfc_sli_hba_down(struct lpfc_hba * phba) |
| 2257 | { |
| 2258 | struct lpfc_sli *psli; |
| 2259 | struct lpfc_sli_ring *pring; |
| 2260 | LPFC_MBOXQ_t *pmb; |
| 2261 | struct lpfc_iocbq *iocb, *next_iocb; |
| 2262 | IOCB_t *icmd = NULL; |
| 2263 | int i; |
| 2264 | unsigned long flags = 0; |
| 2265 | |
| 2266 | psli = &phba->sli; |
| 2267 | lpfc_hba_down_prep(phba); |
| 2268 | |
| 2269 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 2270 | |
| 2271 | for (i = 0; i < psli->num_rings; i++) { |
| 2272 | pring = &psli->ring[i]; |
| 2273 | pring->flag |= LPFC_DEFERRED_RING_EVENT; |
| 2274 | |
| 2275 | /* |
| 2276 | * Error everything on the txq since these iocbs have not been |
| 2277 | * given to the FW yet. |
| 2278 | */ |
| 2279 | pring->txq_cnt = 0; |
| 2280 | |
| 2281 | list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { |
| 2282 | list_del_init(&iocb->list); |
| 2283 | if (iocb->iocb_cmpl) { |
| 2284 | icmd = &iocb->iocb; |
| 2285 | icmd->ulpStatus = IOSTAT_LOCAL_REJECT; |
| 2286 | icmd->un.ulpWord[4] = IOERR_SLI_DOWN; |
| 2287 | spin_unlock_irqrestore(phba->host->host_lock, |
| 2288 | flags); |
| 2289 | (iocb->iocb_cmpl) (phba, iocb, iocb); |
| 2290 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 2291 | } else { |
| 2292 | list_add_tail(&iocb->list, |
| 2293 | &phba->lpfc_iocb_list); |
| 2294 | } |
| 2295 | } |
| 2296 | |
| 2297 | INIT_LIST_HEAD(&(pring->txq)); |
| 2298 | |
| 2299 | if (pring->fast_lookup) { |
| 2300 | kfree(pring->fast_lookup); |
| 2301 | pring->fast_lookup = NULL; |
| 2302 | } |
| 2303 | |
| 2304 | } |
| 2305 | |
| 2306 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 2307 | |
| 2308 | /* Return any active mbox cmds */ |
| 2309 | del_timer_sync(&psli->mbox_tmo); |
| 2310 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 2311 | phba->work_hba_events &= ~WORKER_MBOX_TMO; |
| 2312 | if (psli->mbox_active) { |
| 2313 | pmb = psli->mbox_active; |
| 2314 | pmb->mb.mbxStatus = MBX_NOT_FINISHED; |
| 2315 | if (pmb->mbox_cmpl) { |
| 2316 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 2317 | pmb->mbox_cmpl(phba,pmb); |
| 2318 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 2319 | } |
| 2320 | } |
| 2321 | psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
| 2322 | psli->mbox_active = NULL; |
| 2323 | |
| 2324 | /* Return any pending mbox cmds */ |
| 2325 | while ((pmb = lpfc_mbox_get(phba)) != NULL) { |
| 2326 | pmb->mb.mbxStatus = MBX_NOT_FINISHED; |
| 2327 | if (pmb->mbox_cmpl) { |
| 2328 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 2329 | pmb->mbox_cmpl(phba,pmb); |
| 2330 | spin_lock_irqsave(phba->host->host_lock, flags); |
| 2331 | } |
| 2332 | } |
| 2333 | |
| 2334 | INIT_LIST_HEAD(&psli->mboxq); |
| 2335 | |
| 2336 | spin_unlock_irqrestore(phba->host->host_lock, flags); |
| 2337 | |
| 2338 | /* |
| 2339 | * Provided the hba is not in an error state, reset it. It is not |
| 2340 | * capable of IO anymore. |
| 2341 | */ |
| 2342 | if (phba->hba_state != LPFC_HBA_ERROR) { |
| 2343 | phba->hba_state = LPFC_INIT_START; |
| 2344 | lpfc_sli_brdreset(phba, 1); |
| 2345 | } |
| 2346 | |
| 2347 | return 1; |
| 2348 | } |
| 2349 | |
| 2350 | void |
| 2351 | lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) |
| 2352 | { |
| 2353 | uint32_t *src = srcp; |
| 2354 | uint32_t *dest = destp; |
| 2355 | uint32_t ldata; |
| 2356 | int i; |
| 2357 | |
| 2358 | for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) { |
| 2359 | ldata = *src; |
| 2360 | ldata = le32_to_cpu(ldata); |
| 2361 | *dest = ldata; |
| 2362 | src++; |
| 2363 | dest++; |
| 2364 | } |
| 2365 | } |
| 2366 | |
| 2367 | int |
| 2368 | lpfc_sli_ringpostbuf_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, |
| 2369 | struct lpfc_dmabuf * mp) |
| 2370 | { |
| 2371 | /* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up |
| 2372 | later */ |
| 2373 | list_add_tail(&mp->list, &pring->postbufq); |
| 2374 | |
| 2375 | pring->postbufq_cnt++; |
| 2376 | return 0; |
| 2377 | } |
| 2378 | |
| 2379 | |
| 2380 | struct lpfc_dmabuf * |
| 2381 | lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 2382 | dma_addr_t phys) |
| 2383 | { |
| 2384 | struct lpfc_dmabuf *mp, *next_mp; |
| 2385 | struct list_head *slp = &pring->postbufq; |
| 2386 | |
| 2387 | /* Search postbufq, from the begining, looking for a match on phys */ |
| 2388 | list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { |
| 2389 | if (mp->phys == phys) { |
| 2390 | list_del_init(&mp->list); |
| 2391 | pring->postbufq_cnt--; |
| 2392 | return mp; |
| 2393 | } |
| 2394 | } |
| 2395 | |
| 2396 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 2397 | "%d:0410 Cannot find virtual addr for mapped buf on " |
| 2398 | "ring %d Data x%llx x%p x%p x%x\n", |
| 2399 | phba->brd_no, pring->ringno, (unsigned long long)phys, |
| 2400 | slp->next, slp->prev, pring->postbufq_cnt); |
| 2401 | return NULL; |
| 2402 | } |
| 2403 | |
| 2404 | static void |
| 2405 | lpfc_sli_abort_elsreq_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, |
| 2406 | struct lpfc_iocbq * rspiocb) |
| 2407 | { |
| 2408 | struct lpfc_dmabuf *buf_ptr, *buf_ptr1; |
| 2409 | /* Free the resources associated with the ELS_REQUEST64 IOCB the driver |
| 2410 | * just aborted. |
| 2411 | * In this case, context2 = cmd, context2->next = rsp, context3 = bpl |
| 2412 | */ |
| 2413 | if (cmdiocb->context2) { |
| 2414 | buf_ptr1 = (struct lpfc_dmabuf *) cmdiocb->context2; |
| 2415 | |
| 2416 | /* Free the response IOCB before completing the abort |
| 2417 | command. */ |
| 2418 | buf_ptr = NULL; |
| 2419 | list_remove_head((&buf_ptr1->list), buf_ptr, |
| 2420 | struct lpfc_dmabuf, list); |
| 2421 | if (buf_ptr) { |
| 2422 | lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); |
| 2423 | kfree(buf_ptr); |
| 2424 | } |
| 2425 | lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys); |
| 2426 | kfree(buf_ptr1); |
| 2427 | } |
| 2428 | |
| 2429 | if (cmdiocb->context3) { |
| 2430 | buf_ptr = (struct lpfc_dmabuf *) cmdiocb->context3; |
| 2431 | lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); |
| 2432 | kfree(buf_ptr); |
| 2433 | } |
| 2434 | |
| 2435 | list_add_tail(&cmdiocb->list, &phba->lpfc_iocb_list); |
| 2436 | return; |
| 2437 | } |
| 2438 | |
| 2439 | int |
| 2440 | lpfc_sli_issue_abort_iotag32(struct lpfc_hba * phba, |
| 2441 | struct lpfc_sli_ring * pring, |
| 2442 | struct lpfc_iocbq * cmdiocb) |
| 2443 | { |
| 2444 | struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list; |
| 2445 | struct lpfc_iocbq *abtsiocbp = NULL; |
| 2446 | IOCB_t *icmd = NULL; |
| 2447 | IOCB_t *iabt = NULL; |
| 2448 | |
| 2449 | /* issue ABTS for this IOCB based on iotag */ |
| 2450 | list_remove_head(lpfc_iocb_list, abtsiocbp, struct lpfc_iocbq, list); |
| 2451 | if (abtsiocbp == NULL) |
| 2452 | return 0; |
| 2453 | memset(abtsiocbp, 0, sizeof (struct lpfc_iocbq)); |
| 2454 | |
| 2455 | iabt = &abtsiocbp->iocb; |
| 2456 | icmd = &cmdiocb->iocb; |
| 2457 | switch (icmd->ulpCommand) { |
| 2458 | case CMD_ELS_REQUEST64_CR: |
| 2459 | /* Even though we abort the ELS command, the firmware may access |
| 2460 | * the BPL or other resources before it processes our |
| 2461 | * ABORT_MXRI64. Thus we must delay reusing the cmdiocb |
| 2462 | * resources till the actual abort request completes. |
| 2463 | */ |
| 2464 | abtsiocbp->context1 = (void *)((unsigned long)icmd->ulpCommand); |
| 2465 | abtsiocbp->context2 = cmdiocb->context2; |
| 2466 | abtsiocbp->context3 = cmdiocb->context3; |
| 2467 | cmdiocb->context2 = NULL; |
| 2468 | cmdiocb->context3 = NULL; |
| 2469 | abtsiocbp->iocb_cmpl = lpfc_sli_abort_elsreq_cmpl; |
| 2470 | break; |
| 2471 | default: |
| 2472 | list_add_tail(&abtsiocbp->list, lpfc_iocb_list); |
| 2473 | return 0; |
| 2474 | } |
| 2475 | |
| 2476 | iabt->un.amxri.abortType = ABORT_TYPE_ABTS; |
| 2477 | iabt->un.amxri.iotag32 = icmd->un.elsreq64.bdl.ulpIoTag32; |
| 2478 | |
| 2479 | iabt->ulpLe = 1; |
| 2480 | iabt->ulpClass = CLASS3; |
| 2481 | iabt->ulpCommand = CMD_ABORT_MXRI64_CN; |
| 2482 | |
| 2483 | if (lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0) == IOCB_ERROR) { |
| 2484 | list_add_tail(&abtsiocbp->list, lpfc_iocb_list); |
| 2485 | return 0; |
| 2486 | } |
| 2487 | |
| 2488 | return 1; |
| 2489 | } |
| 2490 | |
| 2491 | static int |
| 2492 | lpfc_sli_validate_iocb_cmd(struct lpfc_scsi_buf *lpfc_cmd, uint16_t tgt_id, |
| 2493 | uint64_t lun_id, struct lpfc_iocbq *iocb, |
| 2494 | uint32_t ctx, lpfc_ctx_cmd ctx_cmd) |
| 2495 | { |
| 2496 | int rc = 1; |
| 2497 | |
| 2498 | if (lpfc_cmd == NULL) |
| 2499 | return rc; |
| 2500 | |
| 2501 | switch (ctx_cmd) { |
| 2502 | case LPFC_CTX_LUN: |
| 2503 | if ((lpfc_cmd->pCmd->device->id == tgt_id) && |
| 2504 | (lpfc_cmd->pCmd->device->lun == lun_id)) |
| 2505 | rc = 0; |
| 2506 | break; |
| 2507 | case LPFC_CTX_TGT: |
| 2508 | if (lpfc_cmd->pCmd->device->id == tgt_id) |
| 2509 | rc = 0; |
| 2510 | break; |
| 2511 | case LPFC_CTX_CTX: |
| 2512 | if (iocb->iocb.ulpContext == ctx) |
| 2513 | rc = 0; |
| 2514 | case LPFC_CTX_HOST: |
| 2515 | rc = 0; |
| 2516 | break; |
| 2517 | default: |
| 2518 | printk(KERN_ERR "%s: Unknown context cmd type, value %d\n", |
| 2519 | __FUNCTION__, ctx_cmd); |
| 2520 | break; |
| 2521 | } |
| 2522 | |
| 2523 | return rc; |
| 2524 | } |
| 2525 | |
| 2526 | int |
| 2527 | lpfc_sli_sum_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 2528 | uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd) |
| 2529 | { |
| 2530 | struct lpfc_iocbq *iocb, *next_iocb; |
| 2531 | IOCB_t *cmd = NULL; |
| 2532 | struct lpfc_scsi_buf *lpfc_cmd; |
| 2533 | int sum = 0, ret_val = 0; |
| 2534 | |
| 2535 | /* Next check the txcmplq */ |
| 2536 | list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { |
| 2537 | cmd = &iocb->iocb; |
| 2538 | |
| 2539 | /* Must be a FCP command */ |
| 2540 | if ((cmd->ulpCommand != CMD_FCP_ICMND64_CR) && |
| 2541 | (cmd->ulpCommand != CMD_FCP_IWRITE64_CR) && |
| 2542 | (cmd->ulpCommand != CMD_FCP_IREAD64_CR)) { |
| 2543 | continue; |
| 2544 | } |
| 2545 | |
| 2546 | /* context1 MUST be a struct lpfc_scsi_buf */ |
| 2547 | lpfc_cmd = (struct lpfc_scsi_buf *) (iocb->context1); |
| 2548 | ret_val = lpfc_sli_validate_iocb_cmd(lpfc_cmd, tgt_id, lun_id, |
| 2549 | NULL, 0, ctx_cmd); |
| 2550 | if (ret_val != 0) |
| 2551 | continue; |
| 2552 | sum++; |
| 2553 | } |
| 2554 | return sum; |
| 2555 | } |
| 2556 | |
| 2557 | int |
| 2558 | lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, |
| 2559 | uint16_t tgt_id, uint64_t lun_id, uint32_t ctx, |
| 2560 | lpfc_ctx_cmd abort_cmd) |
| 2561 | { |
| 2562 | struct lpfc_iocbq *iocb, *next_iocb; |
| 2563 | struct lpfc_iocbq *abtsiocb = NULL; |
| 2564 | struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list; |
| 2565 | IOCB_t *cmd = NULL; |
| 2566 | struct lpfc_scsi_buf *lpfc_cmd; |
| 2567 | int errcnt = 0, ret_val = 0; |
| 2568 | |
| 2569 | list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { |
| 2570 | cmd = &iocb->iocb; |
| 2571 | |
| 2572 | /* Must be a FCP command */ |
| 2573 | if ((cmd->ulpCommand != CMD_FCP_ICMND64_CR) && |
| 2574 | (cmd->ulpCommand != CMD_FCP_IWRITE64_CR) && |
| 2575 | (cmd->ulpCommand != CMD_FCP_IREAD64_CR)) { |
| 2576 | continue; |
| 2577 | } |
| 2578 | |
| 2579 | /* context1 MUST be a struct lpfc_scsi_buf */ |
| 2580 | lpfc_cmd = (struct lpfc_scsi_buf *) (iocb->context1); |
| 2581 | ret_val = lpfc_sli_validate_iocb_cmd(lpfc_cmd, tgt_id, lun_id, |
| 2582 | iocb, ctx, abort_cmd); |
| 2583 | if (ret_val != 0) |
| 2584 | continue; |
| 2585 | |
| 2586 | /* issue ABTS for this IOCB based on iotag */ |
| 2587 | list_remove_head(lpfc_iocb_list, abtsiocb, struct lpfc_iocbq, |
| 2588 | list); |
| 2589 | if (abtsiocb == NULL) { |
| 2590 | errcnt++; |
| 2591 | continue; |
| 2592 | } |
| 2593 | memset(abtsiocb, 0, sizeof (struct lpfc_iocbq)); |
| 2594 | |
| 2595 | abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS; |
| 2596 | abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext; |
| 2597 | abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag; |
| 2598 | abtsiocb->iocb.ulpLe = 1; |
| 2599 | abtsiocb->iocb.ulpClass = cmd->ulpClass; |
| 2600 | |
| 2601 | if (phba->hba_state >= LPFC_LINK_UP) |
| 2602 | abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN; |
| 2603 | else |
| 2604 | abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN; |
| 2605 | |
| 2606 | ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0); |
| 2607 | if (ret_val == IOCB_ERROR) { |
| 2608 | list_add_tail(&abtsiocb->list, lpfc_iocb_list); |
| 2609 | errcnt++; |
| 2610 | continue; |
| 2611 | } |
| 2612 | } |
| 2613 | |
| 2614 | return errcnt; |
| 2615 | } |
| 2616 | |
| 2617 | void |
| 2618 | lpfc_sli_wake_iocb_high_priority(struct lpfc_hba * phba, |
| 2619 | struct lpfc_iocbq * queue1, |
| 2620 | struct lpfc_iocbq * queue2) |
| 2621 | { |
| 2622 | if (queue1->context2 && queue2) |
| 2623 | memcpy(queue1->context2, queue2, sizeof (struct lpfc_iocbq)); |
| 2624 | |
| 2625 | /* The waiter is looking for LPFC_IO_HIPRI bit to be set |
| 2626 | as a signal to wake up */ |
| 2627 | queue1->iocb_flag |= LPFC_IO_HIPRI; |
| 2628 | return; |
| 2629 | } |
| 2630 | |
| 2631 | int |
| 2632 | lpfc_sli_issue_iocb_wait_high_priority(struct lpfc_hba * phba, |
| 2633 | struct lpfc_sli_ring * pring, |
| 2634 | struct lpfc_iocbq * piocb, |
| 2635 | uint32_t flag, |
| 2636 | struct lpfc_iocbq * prspiocbq, |
| 2637 | uint32_t timeout) |
| 2638 | { |
| 2639 | int j, delay_time, retval = IOCB_ERROR; |
| 2640 | |
| 2641 | /* The caller must left context1 empty. */ |
| 2642 | if (piocb->context_un.hipri_wait_queue != 0) { |
| 2643 | return IOCB_ERROR; |
| 2644 | } |
| 2645 | |
| 2646 | /* |
| 2647 | * If the caller has provided a response iocbq buffer, context2 must |
| 2648 | * be NULL or its an error. |
| 2649 | */ |
| 2650 | if (prspiocbq && piocb->context2) { |
| 2651 | return IOCB_ERROR; |
| 2652 | } |
| 2653 | |
| 2654 | piocb->context2 = prspiocbq; |
| 2655 | |
| 2656 | /* Setup callback routine and issue the command. */ |
| 2657 | piocb->iocb_cmpl = lpfc_sli_wake_iocb_high_priority; |
| 2658 | retval = lpfc_sli_issue_iocb(phba, pring, piocb, |
| 2659 | flag | SLI_IOCB_HIGH_PRIORITY); |
| 2660 | if (retval != IOCB_SUCCESS) { |
| 2661 | piocb->context2 = NULL; |
| 2662 | return IOCB_ERROR; |
| 2663 | } |
| 2664 | |
| 2665 | /* |
| 2666 | * This high-priority iocb was sent out-of-band. Poll for its |
| 2667 | * completion rather than wait for a signal. Note that the host_lock |
| 2668 | * is held by the midlayer and must be released here to allow the |
| 2669 | * interrupt handlers to complete the IO and signal this routine via |
| 2670 | * the iocb_flag. |
| 2671 | * Also, the delay_time is computed to be one second longer than |
| 2672 | * the scsi command timeout to give the FW time to abort on |
| 2673 | * timeout rather than the driver just giving up. Typically, |
| 2674 | * the midlayer does not specify a time for this command so the |
| 2675 | * driver is free to enforce its own timeout. |
| 2676 | */ |
| 2677 | |
| 2678 | delay_time = ((timeout + 1) * 1000) >> 6; |
| 2679 | retval = IOCB_ERROR; |
| 2680 | spin_unlock_irq(phba->host->host_lock); |
| 2681 | for (j = 0; j < 64; j++) { |
| 2682 | msleep(delay_time); |
| 2683 | if (piocb->iocb_flag & LPFC_IO_HIPRI) { |
| 2684 | piocb->iocb_flag &= ~LPFC_IO_HIPRI; |
| 2685 | retval = IOCB_SUCCESS; |
| 2686 | break; |
| 2687 | } |
| 2688 | } |
| 2689 | |
| 2690 | spin_lock_irq(phba->host->host_lock); |
| 2691 | piocb->context2 = NULL; |
| 2692 | return retval; |
| 2693 | } |
| 2694 | int |
| 2695 | lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq, |
| 2696 | uint32_t timeout) |
| 2697 | { |
| 2698 | DECLARE_WAIT_QUEUE_HEAD(done_q); |
| 2699 | DECLARE_WAITQUEUE(wq_entry, current); |
| 2700 | uint32_t timeleft = 0; |
| 2701 | int retval; |
| 2702 | |
| 2703 | /* The caller must leave context1 empty. */ |
| 2704 | if (pmboxq->context1 != 0) { |
| 2705 | return (MBX_NOT_FINISHED); |
| 2706 | } |
| 2707 | |
| 2708 | /* setup wake call as IOCB callback */ |
| 2709 | pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait; |
| 2710 | /* setup context field to pass wait_queue pointer to wake function */ |
| 2711 | pmboxq->context1 = &done_q; |
| 2712 | |
| 2713 | /* start to sleep before we wait, to avoid races */ |
| 2714 | set_current_state(TASK_INTERRUPTIBLE); |
| 2715 | add_wait_queue(&done_q, &wq_entry); |
| 2716 | |
| 2717 | /* now issue the command */ |
| 2718 | retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); |
| 2719 | |
| 2720 | if (retval == MBX_BUSY || retval == MBX_SUCCESS) { |
| 2721 | timeleft = schedule_timeout(timeout * HZ); |
| 2722 | pmboxq->context1 = NULL; |
| 2723 | /* if schedule_timeout returns 0, we timed out and were not |
| 2724 | woken up */ |
| 2725 | if (timeleft == 0) { |
| 2726 | retval = MBX_TIMEOUT; |
| 2727 | } else { |
| 2728 | retval = MBX_SUCCESS; |
| 2729 | } |
| 2730 | } |
| 2731 | |
| 2732 | |
| 2733 | set_current_state(TASK_RUNNING); |
| 2734 | remove_wait_queue(&done_q, &wq_entry); |
| 2735 | return retval; |
| 2736 | } |
| 2737 | |
| 2738 | irqreturn_t |
| 2739 | lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs) |
| 2740 | { |
| 2741 | struct lpfc_hba *phba; |
| 2742 | uint32_t ha_copy; |
| 2743 | uint32_t work_ha_copy; |
| 2744 | unsigned long status; |
| 2745 | int i; |
| 2746 | uint32_t control; |
| 2747 | |
| 2748 | /* |
| 2749 | * Get the driver's phba structure from the dev_id and |
| 2750 | * assume the HBA is not interrupting. |
| 2751 | */ |
| 2752 | phba = (struct lpfc_hba *) dev_id; |
| 2753 | |
| 2754 | if (unlikely(!phba)) |
| 2755 | return IRQ_NONE; |
| 2756 | |
| 2757 | phba->sli.slistat.sli_intr++; |
| 2758 | |
| 2759 | /* |
| 2760 | * Call the HBA to see if it is interrupting. If not, don't claim |
| 2761 | * the interrupt |
| 2762 | */ |
| 2763 | |
| 2764 | /* Ignore all interrupts during initialization. */ |
| 2765 | if (unlikely(phba->hba_state < LPFC_LINK_DOWN)) |
| 2766 | return IRQ_NONE; |
| 2767 | |
| 2768 | /* |
| 2769 | * Read host attention register to determine interrupt source |
| 2770 | * Clear Attention Sources, except Error Attention (to |
| 2771 | * preserve status) and Link Attention |
| 2772 | */ |
| 2773 | spin_lock(phba->host->host_lock); |
| 2774 | ha_copy = readl(phba->HAregaddr); |
| 2775 | writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); |
| 2776 | readl(phba->HAregaddr); /* flush */ |
| 2777 | spin_unlock(phba->host->host_lock); |
| 2778 | |
| 2779 | if (unlikely(!ha_copy)) |
| 2780 | return IRQ_NONE; |
| 2781 | |
| 2782 | work_ha_copy = ha_copy & phba->work_ha_mask; |
| 2783 | |
| 2784 | if (unlikely(work_ha_copy)) { |
| 2785 | if (work_ha_copy & HA_LATT) { |
| 2786 | if (phba->sli.sli_flag & LPFC_PROCESS_LA) { |
| 2787 | /* |
| 2788 | * Turn off Link Attention interrupts |
| 2789 | * until CLEAR_LA done |
| 2790 | */ |
| 2791 | spin_lock(phba->host->host_lock); |
| 2792 | phba->sli.sli_flag &= ~LPFC_PROCESS_LA; |
| 2793 | control = readl(phba->HCregaddr); |
| 2794 | control &= ~HC_LAINT_ENA; |
| 2795 | writel(control, phba->HCregaddr); |
| 2796 | readl(phba->HCregaddr); /* flush */ |
| 2797 | spin_unlock(phba->host->host_lock); |
| 2798 | } |
| 2799 | else |
| 2800 | work_ha_copy &= ~HA_LATT; |
| 2801 | } |
| 2802 | |
| 2803 | if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) { |
| 2804 | for (i = 0; i < phba->sli.num_rings; i++) { |
| 2805 | if (work_ha_copy & (HA_RXATT << (4*i))) { |
| 2806 | /* |
| 2807 | * Turn off Slow Rings interrupts |
| 2808 | */ |
| 2809 | spin_lock(phba->host->host_lock); |
| 2810 | control = readl(phba->HCregaddr); |
| 2811 | control &= ~(HC_R0INT_ENA << i); |
| 2812 | writel(control, phba->HCregaddr); |
| 2813 | readl(phba->HCregaddr); /* flush */ |
| 2814 | spin_unlock(phba->host->host_lock); |
| 2815 | } |
| 2816 | } |
| 2817 | } |
| 2818 | |
| 2819 | if (work_ha_copy & HA_ERATT) { |
| 2820 | phba->hba_state = LPFC_HBA_ERROR; |
| 2821 | /* |
| 2822 | * There was a link/board error. Read the |
| 2823 | * status register to retrieve the error event |
| 2824 | * and process it. |
| 2825 | */ |
| 2826 | phba->sli.slistat.err_attn_event++; |
| 2827 | /* Save status info */ |
| 2828 | phba->work_hs = readl(phba->HSregaddr); |
| 2829 | phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); |
| 2830 | phba->work_status[1] = readl(phba->MBslimaddr + 0xac); |
| 2831 | |
| 2832 | /* Clear Chip error bit */ |
| 2833 | writel(HA_ERATT, phba->HAregaddr); |
| 2834 | readl(phba->HAregaddr); /* flush */ |
| 2835 | |
| 2836 | /* |
| 2837 | * Reseting the HBA is the only reliable way |
| 2838 | * to shutdown interrupt when there is a |
| 2839 | * ERROR. |
| 2840 | */ |
| 2841 | lpfc_sli_send_reset(phba, phba->hba_state); |
| 2842 | } |
| 2843 | |
| 2844 | spin_lock(phba->host->host_lock); |
| 2845 | phba->work_ha |= work_ha_copy; |
| 2846 | if (phba->work_wait) |
| 2847 | wake_up(phba->work_wait); |
| 2848 | spin_unlock(phba->host->host_lock); |
| 2849 | } |
| 2850 | |
| 2851 | ha_copy &= ~(phba->work_ha_mask); |
| 2852 | |
| 2853 | /* |
| 2854 | * Process all events on FCP ring. Take the optimized path for |
| 2855 | * FCP IO. Any other IO is slow path and is handled by |
| 2856 | * the worker thread. |
| 2857 | */ |
| 2858 | status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); |
| 2859 | status >>= (4*LPFC_FCP_RING); |
| 2860 | if (status & HA_RXATT) |
| 2861 | lpfc_sli_handle_fast_ring_event(phba, |
| 2862 | &phba->sli.ring[LPFC_FCP_RING], |
| 2863 | status); |
| 2864 | return IRQ_HANDLED; |
| 2865 | |
| 2866 | } /* lpfc_intr_handler */ |