Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* This version ported to the Linux-MTD system by dwmw2@infradead.org |
Herbert Valerio Riedel | 8ea2e06 | 2005-01-17 13:47:24 +0000 | [diff] [blame] | 2 | * $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 | * |
| 4 | * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| 5 | * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups |
| 6 | * |
| 7 | * Based on: |
| 8 | */ |
| 9 | /*====================================================================== |
| 10 | |
| 11 | A Flash Translation Layer memory card driver |
| 12 | |
| 13 | This driver implements a disk-like block device driver with an |
| 14 | apparent block size of 512 bytes for flash memory cards. |
| 15 | |
| 16 | ftl_cs.c 1.62 2000/02/01 00:59:04 |
| 17 | |
| 18 | The contents of this file are subject to the Mozilla Public |
| 19 | License Version 1.1 (the "License"); you may not use this file |
| 20 | except in compliance with the License. You may obtain a copy of |
| 21 | the License at http://www.mozilla.org/MPL/ |
| 22 | |
| 23 | Software distributed under the License is distributed on an "AS |
| 24 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| 25 | implied. See the License for the specific language governing |
| 26 | rights and limitations under the License. |
| 27 | |
| 28 | The initial developer of the original code is David A. Hinds |
| 29 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| 30 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| 31 | |
| 32 | Alternatively, the contents of this file may be used under the |
| 33 | terms of the GNU General Public License version 2 (the "GPL"), in |
| 34 | which case the provisions of the GPL are applicable instead of the |
| 35 | above. If you wish to allow the use of your version of this file |
| 36 | only under the terms of the GPL and not to allow others to use |
| 37 | your version of this file under the MPL, indicate your decision |
| 38 | by deleting the provisions above and replace them with the notice |
| 39 | and other provisions required by the GPL. If you do not delete |
| 40 | the provisions above, a recipient may use your version of this |
| 41 | file under either the MPL or the GPL. |
| 42 | |
| 43 | LEGAL NOTE: The FTL format is patented by M-Systems. They have |
| 44 | granted a license for its use with PCMCIA devices: |
| 45 | |
| 46 | "M-Systems grants a royalty-free, non-exclusive license under |
| 47 | any presently existing M-Systems intellectual property rights |
| 48 | necessary for the design and development of FTL-compatible |
| 49 | drivers, file systems and utilities using the data formats with |
| 50 | PCMCIA PC Cards as described in the PCMCIA Flash Translation |
| 51 | Layer (FTL) Specification." |
| 52 | |
| 53 | Use of the FTL format for non-PCMCIA applications may be an |
| 54 | infringement of these patents. For additional information, |
| 55 | contact M-Systems (http://www.m-sys.com) directly. |
| 56 | |
| 57 | ======================================================================*/ |
| 58 | #include <linux/mtd/blktrans.h> |
| 59 | #include <linux/module.h> |
| 60 | #include <linux/mtd/mtd.h> |
| 61 | /*#define PSYCHO_DEBUG */ |
| 62 | |
| 63 | #include <linux/kernel.h> |
| 64 | #include <linux/sched.h> |
| 65 | #include <linux/ptrace.h> |
| 66 | #include <linux/slab.h> |
| 67 | #include <linux/string.h> |
| 68 | #include <linux/timer.h> |
| 69 | #include <linux/major.h> |
| 70 | #include <linux/fs.h> |
| 71 | #include <linux/init.h> |
| 72 | #include <linux/hdreg.h> |
| 73 | #include <linux/vmalloc.h> |
| 74 | #include <linux/blkpg.h> |
| 75 | #include <asm/uaccess.h> |
| 76 | |
| 77 | #include <linux/mtd/ftl.h> |
| 78 | |
| 79 | /*====================================================================*/ |
| 80 | |
| 81 | /* Parameters that can be set with 'insmod' */ |
| 82 | static int shuffle_freq = 50; |
| 83 | module_param(shuffle_freq, int, 0); |
| 84 | |
| 85 | /*====================================================================*/ |
| 86 | |
| 87 | /* Major device # for FTL device */ |
| 88 | #ifndef FTL_MAJOR |
| 89 | #define FTL_MAJOR 44 |
| 90 | #endif |
| 91 | |
| 92 | |
| 93 | /*====================================================================*/ |
| 94 | |
| 95 | /* Maximum number of separate memory devices we'll allow */ |
| 96 | #define MAX_DEV 4 |
| 97 | |
| 98 | /* Maximum number of regions per device */ |
| 99 | #define MAX_REGION 4 |
| 100 | |
| 101 | /* Maximum number of partitions in an FTL region */ |
| 102 | #define PART_BITS 4 |
| 103 | |
| 104 | /* Maximum number of outstanding erase requests per socket */ |
| 105 | #define MAX_ERASE 8 |
| 106 | |
| 107 | /* Sector size -- shouldn't need to change */ |
| 108 | #define SECTOR_SIZE 512 |
| 109 | |
| 110 | |
| 111 | /* Each memory region corresponds to a minor device */ |
| 112 | typedef struct partition_t { |
| 113 | struct mtd_blktrans_dev mbd; |
| 114 | u_int32_t state; |
| 115 | u_int32_t *VirtualBlockMap; |
| 116 | u_int32_t *VirtualPageMap; |
| 117 | u_int32_t FreeTotal; |
| 118 | struct eun_info_t { |
| 119 | u_int32_t Offset; |
| 120 | u_int32_t EraseCount; |
| 121 | u_int32_t Free; |
| 122 | u_int32_t Deleted; |
| 123 | } *EUNInfo; |
| 124 | struct xfer_info_t { |
| 125 | u_int32_t Offset; |
| 126 | u_int32_t EraseCount; |
| 127 | u_int16_t state; |
| 128 | } *XferInfo; |
| 129 | u_int16_t bam_index; |
| 130 | u_int32_t *bam_cache; |
| 131 | u_int16_t DataUnits; |
| 132 | u_int32_t BlocksPerUnit; |
| 133 | erase_unit_header_t header; |
| 134 | #if 0 |
| 135 | region_info_t region; |
| 136 | memory_handle_t handle; |
| 137 | #endif |
| 138 | } partition_t; |
| 139 | |
| 140 | void ftl_freepart(partition_t *part); |
| 141 | |
| 142 | /* Partition state flags */ |
| 143 | #define FTL_FORMATTED 0x01 |
| 144 | |
| 145 | /* Transfer unit states */ |
| 146 | #define XFER_UNKNOWN 0x00 |
| 147 | #define XFER_ERASING 0x01 |
| 148 | #define XFER_ERASED 0x02 |
| 149 | #define XFER_PREPARED 0x03 |
| 150 | #define XFER_FAILED 0x04 |
| 151 | |
| 152 | /*====================================================================*/ |
| 153 | |
| 154 | |
| 155 | static void ftl_erase_callback(struct erase_info *done); |
| 156 | |
| 157 | |
| 158 | /*====================================================================== |
| 159 | |
| 160 | Scan_header() checks to see if a memory region contains an FTL |
| 161 | partition. build_maps() reads all the erase unit headers, builds |
| 162 | the erase unit map, and then builds the virtual page map. |
| 163 | |
| 164 | ======================================================================*/ |
| 165 | |
| 166 | static int scan_header(partition_t *part) |
| 167 | { |
| 168 | erase_unit_header_t header; |
| 169 | loff_t offset, max_offset; |
| 170 | size_t ret; |
| 171 | int err; |
| 172 | part->header.FormattedSize = 0; |
| 173 | max_offset = (0x100000<part->mbd.mtd->size)?0x100000:part->mbd.mtd->size; |
| 174 | /* Search first megabyte for a valid FTL header */ |
| 175 | for (offset = 0; |
| 176 | (offset + sizeof(header)) < max_offset; |
| 177 | offset += part->mbd.mtd->erasesize ? : 0x2000) { |
| 178 | |
| 179 | err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, |
| 180 | (unsigned char *)&header); |
| 181 | |
| 182 | if (err) |
| 183 | return err; |
| 184 | |
| 185 | if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break; |
| 186 | } |
| 187 | |
| 188 | if (offset == max_offset) { |
| 189 | printk(KERN_NOTICE "ftl_cs: FTL header not found.\n"); |
| 190 | return -ENOENT; |
| 191 | } |
| 192 | if (header.BlockSize != 9 || |
| 193 | (header.EraseUnitSize < 10) || (header.EraseUnitSize > 31) || |
| 194 | (header.NumTransferUnits >= le16_to_cpu(header.NumEraseUnits))) { |
| 195 | printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n"); |
| 196 | return -1; |
| 197 | } |
| 198 | if ((1 << header.EraseUnitSize) != part->mbd.mtd->erasesize) { |
| 199 | printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n", |
| 200 | 1 << header.EraseUnitSize,part->mbd.mtd->erasesize); |
| 201 | return -1; |
| 202 | } |
| 203 | part->header = header; |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static int build_maps(partition_t *part) |
| 208 | { |
| 209 | erase_unit_header_t header; |
| 210 | u_int16_t xvalid, xtrans, i; |
| 211 | u_int blocks, j; |
| 212 | int hdr_ok, ret = -1; |
| 213 | ssize_t retval; |
| 214 | loff_t offset; |
| 215 | |
| 216 | /* Set up erase unit maps */ |
| 217 | part->DataUnits = le16_to_cpu(part->header.NumEraseUnits) - |
| 218 | part->header.NumTransferUnits; |
| 219 | part->EUNInfo = kmalloc(part->DataUnits * sizeof(struct eun_info_t), |
| 220 | GFP_KERNEL); |
| 221 | if (!part->EUNInfo) |
| 222 | goto out; |
| 223 | for (i = 0; i < part->DataUnits; i++) |
| 224 | part->EUNInfo[i].Offset = 0xffffffff; |
| 225 | part->XferInfo = |
| 226 | kmalloc(part->header.NumTransferUnits * sizeof(struct xfer_info_t), |
| 227 | GFP_KERNEL); |
| 228 | if (!part->XferInfo) |
| 229 | goto out_EUNInfo; |
| 230 | |
| 231 | xvalid = xtrans = 0; |
| 232 | for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) { |
| 233 | offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN)) |
| 234 | << part->header.EraseUnitSize); |
| 235 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, |
| 236 | (unsigned char *)&header); |
| 237 | |
| 238 | if (ret) |
| 239 | goto out_XferInfo; |
| 240 | |
| 241 | ret = -1; |
| 242 | /* Is this a transfer partition? */ |
| 243 | hdr_ok = (strcmp(header.DataOrgTuple+3, "FTL100") == 0); |
| 244 | if (hdr_ok && (le16_to_cpu(header.LogicalEUN) < part->DataUnits) && |
| 245 | (part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset == 0xffffffff)) { |
| 246 | part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset = offset; |
| 247 | part->EUNInfo[le16_to_cpu(header.LogicalEUN)].EraseCount = |
| 248 | le32_to_cpu(header.EraseCount); |
| 249 | xvalid++; |
| 250 | } else { |
| 251 | if (xtrans == part->header.NumTransferUnits) { |
| 252 | printk(KERN_NOTICE "ftl_cs: format error: too many " |
| 253 | "transfer units!\n"); |
| 254 | goto out_XferInfo; |
| 255 | } |
| 256 | if (hdr_ok && (le16_to_cpu(header.LogicalEUN) == 0xffff)) { |
| 257 | part->XferInfo[xtrans].state = XFER_PREPARED; |
| 258 | part->XferInfo[xtrans].EraseCount = le32_to_cpu(header.EraseCount); |
| 259 | } else { |
| 260 | part->XferInfo[xtrans].state = XFER_UNKNOWN; |
| 261 | /* Pick anything reasonable for the erase count */ |
| 262 | part->XferInfo[xtrans].EraseCount = |
| 263 | le32_to_cpu(part->header.EraseCount); |
| 264 | } |
| 265 | part->XferInfo[xtrans].Offset = offset; |
| 266 | xtrans++; |
| 267 | } |
| 268 | } |
| 269 | /* Check for format trouble */ |
| 270 | header = part->header; |
| 271 | if ((xtrans != header.NumTransferUnits) || |
| 272 | (xvalid+xtrans != le16_to_cpu(header.NumEraseUnits))) { |
| 273 | printk(KERN_NOTICE "ftl_cs: format error: erase units " |
| 274 | "don't add up!\n"); |
| 275 | goto out_XferInfo; |
| 276 | } |
| 277 | |
| 278 | /* Set up virtual page map */ |
| 279 | blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize; |
| 280 | part->VirtualBlockMap = vmalloc(blocks * sizeof(u_int32_t)); |
| 281 | if (!part->VirtualBlockMap) |
| 282 | goto out_XferInfo; |
| 283 | |
| 284 | memset(part->VirtualBlockMap, 0xff, blocks * sizeof(u_int32_t)); |
| 285 | part->BlocksPerUnit = (1 << header.EraseUnitSize) >> header.BlockSize; |
| 286 | |
| 287 | part->bam_cache = kmalloc(part->BlocksPerUnit * sizeof(u_int32_t), |
| 288 | GFP_KERNEL); |
| 289 | if (!part->bam_cache) |
| 290 | goto out_VirtualBlockMap; |
| 291 | |
| 292 | part->bam_index = 0xffff; |
| 293 | part->FreeTotal = 0; |
| 294 | |
| 295 | for (i = 0; i < part->DataUnits; i++) { |
| 296 | part->EUNInfo[i].Free = 0; |
| 297 | part->EUNInfo[i].Deleted = 0; |
| 298 | offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset); |
| 299 | |
| 300 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, |
| 301 | part->BlocksPerUnit * sizeof(u_int32_t), &retval, |
| 302 | (unsigned char *)part->bam_cache); |
| 303 | |
| 304 | if (ret) |
| 305 | goto out_bam_cache; |
| 306 | |
| 307 | for (j = 0; j < part->BlocksPerUnit; j++) { |
| 308 | if (BLOCK_FREE(le32_to_cpu(part->bam_cache[j]))) { |
| 309 | part->EUNInfo[i].Free++; |
| 310 | part->FreeTotal++; |
| 311 | } else if ((BLOCK_TYPE(le32_to_cpu(part->bam_cache[j])) == BLOCK_DATA) && |
| 312 | (BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j])) < blocks)) |
| 313 | part->VirtualBlockMap[BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j]))] = |
| 314 | (i << header.EraseUnitSize) + (j << header.BlockSize); |
| 315 | else if (BLOCK_DELETED(le32_to_cpu(part->bam_cache[j]))) |
| 316 | part->EUNInfo[i].Deleted++; |
| 317 | } |
| 318 | } |
| 319 | |
| 320 | ret = 0; |
| 321 | goto out; |
| 322 | |
| 323 | out_bam_cache: |
| 324 | kfree(part->bam_cache); |
| 325 | out_VirtualBlockMap: |
| 326 | vfree(part->VirtualBlockMap); |
| 327 | out_XferInfo: |
| 328 | kfree(part->XferInfo); |
| 329 | out_EUNInfo: |
| 330 | kfree(part->EUNInfo); |
| 331 | out: |
| 332 | return ret; |
| 333 | } /* build_maps */ |
| 334 | |
| 335 | /*====================================================================== |
| 336 | |
| 337 | Erase_xfer() schedules an asynchronous erase operation for a |
| 338 | transfer unit. |
| 339 | |
| 340 | ======================================================================*/ |
| 341 | |
| 342 | static int erase_xfer(partition_t *part, |
| 343 | u_int16_t xfernum) |
| 344 | { |
| 345 | int ret; |
| 346 | struct xfer_info_t *xfer; |
| 347 | struct erase_info *erase; |
| 348 | |
| 349 | xfer = &part->XferInfo[xfernum]; |
| 350 | DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset); |
| 351 | xfer->state = XFER_ERASING; |
| 352 | |
| 353 | /* Is there a free erase slot? Always in MTD. */ |
| 354 | |
| 355 | |
| 356 | erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL); |
| 357 | if (!erase) |
| 358 | return -ENOMEM; |
| 359 | |
Herbert Valerio Riedel | 8ea2e06 | 2005-01-17 13:47:24 +0000 | [diff] [blame] | 360 | erase->mtd = part->mbd.mtd; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 361 | erase->callback = ftl_erase_callback; |
| 362 | erase->addr = xfer->Offset; |
| 363 | erase->len = 1 << part->header.EraseUnitSize; |
| 364 | erase->priv = (u_long)part; |
| 365 | |
| 366 | ret = part->mbd.mtd->erase(part->mbd.mtd, erase); |
| 367 | |
| 368 | if (!ret) |
| 369 | xfer->EraseCount++; |
| 370 | else |
| 371 | kfree(erase); |
| 372 | |
| 373 | return ret; |
| 374 | } /* erase_xfer */ |
| 375 | |
| 376 | /*====================================================================== |
| 377 | |
| 378 | Prepare_xfer() takes a freshly erased transfer unit and gives |
| 379 | it an appropriate header. |
| 380 | |
| 381 | ======================================================================*/ |
| 382 | |
| 383 | static void ftl_erase_callback(struct erase_info *erase) |
| 384 | { |
| 385 | partition_t *part; |
| 386 | struct xfer_info_t *xfer; |
| 387 | int i; |
| 388 | |
| 389 | /* Look up the transfer unit */ |
| 390 | part = (partition_t *)(erase->priv); |
| 391 | |
| 392 | for (i = 0; i < part->header.NumTransferUnits; i++) |
| 393 | if (part->XferInfo[i].Offset == erase->addr) break; |
| 394 | |
| 395 | if (i == part->header.NumTransferUnits) { |
| 396 | printk(KERN_NOTICE "ftl_cs: internal error: " |
| 397 | "erase lookup failed!\n"); |
| 398 | return; |
| 399 | } |
| 400 | |
| 401 | xfer = &part->XferInfo[i]; |
| 402 | if (erase->state == MTD_ERASE_DONE) |
| 403 | xfer->state = XFER_ERASED; |
| 404 | else { |
| 405 | xfer->state = XFER_FAILED; |
| 406 | printk(KERN_NOTICE "ftl_cs: erase failed: state = %d\n", |
| 407 | erase->state); |
| 408 | } |
| 409 | |
| 410 | kfree(erase); |
| 411 | |
| 412 | } /* ftl_erase_callback */ |
| 413 | |
| 414 | static int prepare_xfer(partition_t *part, int i) |
| 415 | { |
| 416 | erase_unit_header_t header; |
| 417 | struct xfer_info_t *xfer; |
| 418 | int nbam, ret; |
| 419 | u_int32_t ctl; |
| 420 | ssize_t retlen; |
| 421 | loff_t offset; |
| 422 | |
| 423 | xfer = &part->XferInfo[i]; |
| 424 | xfer->state = XFER_FAILED; |
| 425 | |
| 426 | DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset); |
| 427 | |
| 428 | /* Write the transfer unit header */ |
| 429 | header = part->header; |
| 430 | header.LogicalEUN = cpu_to_le16(0xffff); |
| 431 | header.EraseCount = cpu_to_le32(xfer->EraseCount); |
| 432 | |
| 433 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header), |
| 434 | &retlen, (u_char *)&header); |
| 435 | |
| 436 | if (ret) { |
| 437 | return ret; |
| 438 | } |
| 439 | |
| 440 | /* Write the BAM stub */ |
| 441 | nbam = (part->BlocksPerUnit * sizeof(u_int32_t) + |
| 442 | le32_to_cpu(part->header.BAMOffset) + SECTOR_SIZE - 1) / SECTOR_SIZE; |
| 443 | |
| 444 | offset = xfer->Offset + le32_to_cpu(part->header.BAMOffset); |
| 445 | ctl = cpu_to_le32(BLOCK_CONTROL); |
| 446 | |
| 447 | for (i = 0; i < nbam; i++, offset += sizeof(u_int32_t)) { |
| 448 | |
| 449 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), |
| 450 | &retlen, (u_char *)&ctl); |
| 451 | |
| 452 | if (ret) |
| 453 | return ret; |
| 454 | } |
| 455 | xfer->state = XFER_PREPARED; |
| 456 | return 0; |
| 457 | |
| 458 | } /* prepare_xfer */ |
| 459 | |
| 460 | /*====================================================================== |
| 461 | |
| 462 | Copy_erase_unit() takes a full erase block and a transfer unit, |
| 463 | copies everything to the transfer unit, then swaps the block |
| 464 | pointers. |
| 465 | |
| 466 | All data blocks are copied to the corresponding blocks in the |
| 467 | target unit, so the virtual block map does not need to be |
| 468 | updated. |
| 469 | |
| 470 | ======================================================================*/ |
| 471 | |
| 472 | static int copy_erase_unit(partition_t *part, u_int16_t srcunit, |
| 473 | u_int16_t xferunit) |
| 474 | { |
| 475 | u_char buf[SECTOR_SIZE]; |
| 476 | struct eun_info_t *eun; |
| 477 | struct xfer_info_t *xfer; |
| 478 | u_int32_t src, dest, free, i; |
| 479 | u_int16_t unit; |
| 480 | int ret; |
| 481 | ssize_t retlen; |
| 482 | loff_t offset; |
| 483 | u_int16_t srcunitswap = cpu_to_le16(srcunit); |
| 484 | |
| 485 | eun = &part->EUNInfo[srcunit]; |
| 486 | xfer = &part->XferInfo[xferunit]; |
| 487 | DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n", |
| 488 | eun->Offset, xfer->Offset); |
| 489 | |
| 490 | |
| 491 | /* Read current BAM */ |
| 492 | if (part->bam_index != srcunit) { |
| 493 | |
| 494 | offset = eun->Offset + le32_to_cpu(part->header.BAMOffset); |
| 495 | |
| 496 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, |
| 497 | part->BlocksPerUnit * sizeof(u_int32_t), |
| 498 | &retlen, (u_char *) (part->bam_cache)); |
| 499 | |
| 500 | /* mark the cache bad, in case we get an error later */ |
| 501 | part->bam_index = 0xffff; |
| 502 | |
| 503 | if (ret) { |
| 504 | printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); |
| 505 | return ret; |
| 506 | } |
| 507 | } |
| 508 | |
| 509 | /* Write the LogicalEUN for the transfer unit */ |
| 510 | xfer->state = XFER_UNKNOWN; |
| 511 | offset = xfer->Offset + 20; /* Bad! */ |
| 512 | unit = cpu_to_le16(0x7fff); |
| 513 | |
| 514 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int16_t), |
| 515 | &retlen, (u_char *) &unit); |
| 516 | |
| 517 | if (ret) { |
| 518 | printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n"); |
| 519 | return ret; |
| 520 | } |
| 521 | |
| 522 | /* Copy all data blocks from source unit to transfer unit */ |
| 523 | src = eun->Offset; dest = xfer->Offset; |
| 524 | |
| 525 | free = 0; |
| 526 | ret = 0; |
| 527 | for (i = 0; i < part->BlocksPerUnit; i++) { |
| 528 | switch (BLOCK_TYPE(le32_to_cpu(part->bam_cache[i]))) { |
| 529 | case BLOCK_CONTROL: |
| 530 | /* This gets updated later */ |
| 531 | break; |
| 532 | case BLOCK_DATA: |
| 533 | case BLOCK_REPLACEMENT: |
| 534 | ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE, |
| 535 | &retlen, (u_char *) buf); |
| 536 | if (ret) { |
| 537 | printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n"); |
| 538 | return ret; |
| 539 | } |
| 540 | |
| 541 | |
| 542 | ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE, |
| 543 | &retlen, (u_char *) buf); |
| 544 | if (ret) { |
| 545 | printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n"); |
| 546 | return ret; |
| 547 | } |
| 548 | |
| 549 | break; |
| 550 | default: |
| 551 | /* All other blocks must be free */ |
| 552 | part->bam_cache[i] = cpu_to_le32(0xffffffff); |
| 553 | free++; |
| 554 | break; |
| 555 | } |
| 556 | src += SECTOR_SIZE; |
| 557 | dest += SECTOR_SIZE; |
| 558 | } |
| 559 | |
| 560 | /* Write the BAM to the transfer unit */ |
| 561 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), |
| 562 | part->BlocksPerUnit * sizeof(int32_t), &retlen, |
| 563 | (u_char *)part->bam_cache); |
| 564 | if (ret) { |
| 565 | printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n"); |
| 566 | return ret; |
| 567 | } |
| 568 | |
| 569 | |
| 570 | /* All clear? Then update the LogicalEUN again */ |
| 571 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(u_int16_t), |
| 572 | &retlen, (u_char *)&srcunitswap); |
| 573 | |
| 574 | if (ret) { |
| 575 | printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n"); |
| 576 | return ret; |
| 577 | } |
| 578 | |
| 579 | |
| 580 | /* Update the maps and usage stats*/ |
| 581 | i = xfer->EraseCount; |
| 582 | xfer->EraseCount = eun->EraseCount; |
| 583 | eun->EraseCount = i; |
| 584 | i = xfer->Offset; |
| 585 | xfer->Offset = eun->Offset; |
| 586 | eun->Offset = i; |
| 587 | part->FreeTotal -= eun->Free; |
| 588 | part->FreeTotal += free; |
| 589 | eun->Free = free; |
| 590 | eun->Deleted = 0; |
| 591 | |
| 592 | /* Now, the cache should be valid for the new block */ |
| 593 | part->bam_index = srcunit; |
| 594 | |
| 595 | return 0; |
| 596 | } /* copy_erase_unit */ |
| 597 | |
| 598 | /*====================================================================== |
| 599 | |
| 600 | reclaim_block() picks a full erase unit and a transfer unit and |
| 601 | then calls copy_erase_unit() to copy one to the other. Then, it |
| 602 | schedules an erase on the expired block. |
| 603 | |
| 604 | What's a good way to decide which transfer unit and which erase |
| 605 | unit to use? Beats me. My way is to always pick the transfer |
| 606 | unit with the fewest erases, and usually pick the data unit with |
| 607 | the most deleted blocks. But with a small probability, pick the |
| 608 | oldest data unit instead. This means that we generally postpone |
| 609 | the next reclaimation as long as possible, but shuffle static |
| 610 | stuff around a bit for wear leveling. |
| 611 | |
| 612 | ======================================================================*/ |
| 613 | |
| 614 | static int reclaim_block(partition_t *part) |
| 615 | { |
| 616 | u_int16_t i, eun, xfer; |
| 617 | u_int32_t best; |
| 618 | int queued, ret; |
| 619 | |
| 620 | DEBUG(0, "ftl_cs: reclaiming space...\n"); |
| 621 | DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits); |
| 622 | /* Pick the least erased transfer unit */ |
| 623 | best = 0xffffffff; xfer = 0xffff; |
| 624 | do { |
| 625 | queued = 0; |
| 626 | for (i = 0; i < part->header.NumTransferUnits; i++) { |
| 627 | int n=0; |
| 628 | if (part->XferInfo[i].state == XFER_UNKNOWN) { |
| 629 | DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i); |
| 630 | n=1; |
| 631 | erase_xfer(part, i); |
| 632 | } |
| 633 | if (part->XferInfo[i].state == XFER_ERASING) { |
| 634 | DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i); |
| 635 | n=1; |
| 636 | queued = 1; |
| 637 | } |
| 638 | else if (part->XferInfo[i].state == XFER_ERASED) { |
| 639 | DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i); |
| 640 | n=1; |
| 641 | prepare_xfer(part, i); |
| 642 | } |
| 643 | if (part->XferInfo[i].state == XFER_PREPARED) { |
| 644 | DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i); |
| 645 | n=1; |
| 646 | if (part->XferInfo[i].EraseCount <= best) { |
| 647 | best = part->XferInfo[i].EraseCount; |
| 648 | xfer = i; |
| 649 | } |
| 650 | } |
| 651 | if (!n) |
| 652 | DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state); |
| 653 | |
| 654 | } |
| 655 | if (xfer == 0xffff) { |
| 656 | if (queued) { |
| 657 | DEBUG(1, "ftl_cs: waiting for transfer " |
| 658 | "unit to be prepared...\n"); |
| 659 | if (part->mbd.mtd->sync) |
| 660 | part->mbd.mtd->sync(part->mbd.mtd); |
| 661 | } else { |
| 662 | static int ne = 0; |
| 663 | if (++ne < 5) |
| 664 | printk(KERN_NOTICE "ftl_cs: reclaim failed: no " |
| 665 | "suitable transfer units!\n"); |
| 666 | else |
| 667 | DEBUG(1, "ftl_cs: reclaim failed: no " |
| 668 | "suitable transfer units!\n"); |
| 669 | |
| 670 | return -EIO; |
| 671 | } |
| 672 | } |
| 673 | } while (xfer == 0xffff); |
| 674 | |
| 675 | eun = 0; |
| 676 | if ((jiffies % shuffle_freq) == 0) { |
| 677 | DEBUG(1, "ftl_cs: recycling freshest block...\n"); |
| 678 | best = 0xffffffff; |
| 679 | for (i = 0; i < part->DataUnits; i++) |
| 680 | if (part->EUNInfo[i].EraseCount <= best) { |
| 681 | best = part->EUNInfo[i].EraseCount; |
| 682 | eun = i; |
| 683 | } |
| 684 | } else { |
| 685 | best = 0; |
| 686 | for (i = 0; i < part->DataUnits; i++) |
| 687 | if (part->EUNInfo[i].Deleted >= best) { |
| 688 | best = part->EUNInfo[i].Deleted; |
| 689 | eun = i; |
| 690 | } |
| 691 | if (best == 0) { |
| 692 | static int ne = 0; |
| 693 | if (++ne < 5) |
| 694 | printk(KERN_NOTICE "ftl_cs: reclaim failed: " |
| 695 | "no free blocks!\n"); |
| 696 | else |
| 697 | DEBUG(1,"ftl_cs: reclaim failed: " |
| 698 | "no free blocks!\n"); |
| 699 | |
| 700 | return -EIO; |
| 701 | } |
| 702 | } |
| 703 | ret = copy_erase_unit(part, eun, xfer); |
| 704 | if (!ret) |
| 705 | erase_xfer(part, xfer); |
| 706 | else |
| 707 | printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n"); |
| 708 | return ret; |
| 709 | } /* reclaim_block */ |
| 710 | |
| 711 | /*====================================================================== |
| 712 | |
| 713 | Find_free() searches for a free block. If necessary, it updates |
| 714 | the BAM cache for the erase unit containing the free block. It |
| 715 | returns the block index -- the erase unit is just the currently |
| 716 | cached unit. If there are no free blocks, it returns 0 -- this |
| 717 | is never a valid data block because it contains the header. |
| 718 | |
| 719 | ======================================================================*/ |
| 720 | |
| 721 | #ifdef PSYCHO_DEBUG |
| 722 | static void dump_lists(partition_t *part) |
| 723 | { |
| 724 | int i; |
| 725 | printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal); |
| 726 | for (i = 0; i < part->DataUnits; i++) |
| 727 | printk(KERN_DEBUG "ftl_cs: unit %d: %d phys, %d free, " |
| 728 | "%d deleted\n", i, |
| 729 | part->EUNInfo[i].Offset >> part->header.EraseUnitSize, |
| 730 | part->EUNInfo[i].Free, part->EUNInfo[i].Deleted); |
| 731 | } |
| 732 | #endif |
| 733 | |
| 734 | static u_int32_t find_free(partition_t *part) |
| 735 | { |
| 736 | u_int16_t stop, eun; |
| 737 | u_int32_t blk; |
| 738 | size_t retlen; |
| 739 | int ret; |
| 740 | |
| 741 | /* Find an erase unit with some free space */ |
| 742 | stop = (part->bam_index == 0xffff) ? 0 : part->bam_index; |
| 743 | eun = stop; |
| 744 | do { |
| 745 | if (part->EUNInfo[eun].Free != 0) break; |
| 746 | /* Wrap around at end of table */ |
| 747 | if (++eun == part->DataUnits) eun = 0; |
| 748 | } while (eun != stop); |
| 749 | |
| 750 | if (part->EUNInfo[eun].Free == 0) |
| 751 | return 0; |
| 752 | |
| 753 | /* Is this unit's BAM cached? */ |
| 754 | if (eun != part->bam_index) { |
| 755 | /* Invalidate cache */ |
| 756 | part->bam_index = 0xffff; |
| 757 | |
| 758 | ret = part->mbd.mtd->read(part->mbd.mtd, |
| 759 | part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset), |
| 760 | part->BlocksPerUnit * sizeof(u_int32_t), |
| 761 | &retlen, (u_char *) (part->bam_cache)); |
| 762 | |
| 763 | if (ret) { |
| 764 | printk(KERN_WARNING"ftl: Error reading BAM in find_free\n"); |
| 765 | return 0; |
| 766 | } |
| 767 | part->bam_index = eun; |
| 768 | } |
| 769 | |
| 770 | /* Find a free block */ |
| 771 | for (blk = 0; blk < part->BlocksPerUnit; blk++) |
| 772 | if (BLOCK_FREE(le32_to_cpu(part->bam_cache[blk]))) break; |
| 773 | if (blk == part->BlocksPerUnit) { |
| 774 | #ifdef PSYCHO_DEBUG |
| 775 | static int ne = 0; |
| 776 | if (++ne == 1) |
| 777 | dump_lists(part); |
| 778 | #endif |
| 779 | printk(KERN_NOTICE "ftl_cs: bad free list!\n"); |
| 780 | return 0; |
| 781 | } |
| 782 | DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun); |
| 783 | return blk; |
| 784 | |
| 785 | } /* find_free */ |
| 786 | |
| 787 | |
| 788 | /*====================================================================== |
| 789 | |
| 790 | Read a series of sectors from an FTL partition. |
| 791 | |
| 792 | ======================================================================*/ |
| 793 | |
| 794 | static int ftl_read(partition_t *part, caddr_t buffer, |
| 795 | u_long sector, u_long nblocks) |
| 796 | { |
| 797 | u_int32_t log_addr, bsize; |
| 798 | u_long i; |
| 799 | int ret; |
| 800 | size_t offset, retlen; |
| 801 | |
| 802 | DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n", |
| 803 | part, sector, nblocks); |
| 804 | if (!(part->state & FTL_FORMATTED)) { |
| 805 | printk(KERN_NOTICE "ftl_cs: bad partition\n"); |
| 806 | return -EIO; |
| 807 | } |
| 808 | bsize = 1 << part->header.EraseUnitSize; |
| 809 | |
| 810 | for (i = 0; i < nblocks; i++) { |
| 811 | if (((sector+i) * SECTOR_SIZE) >= le32_to_cpu(part->header.FormattedSize)) { |
| 812 | printk(KERN_NOTICE "ftl_cs: bad read offset\n"); |
| 813 | return -EIO; |
| 814 | } |
| 815 | log_addr = part->VirtualBlockMap[sector+i]; |
| 816 | if (log_addr == 0xffffffff) |
| 817 | memset(buffer, 0, SECTOR_SIZE); |
| 818 | else { |
| 819 | offset = (part->EUNInfo[log_addr / bsize].Offset |
| 820 | + (log_addr % bsize)); |
| 821 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE, |
| 822 | &retlen, (u_char *) buffer); |
| 823 | |
| 824 | if (ret) { |
| 825 | printk(KERN_WARNING "Error reading MTD device in ftl_read()\n"); |
| 826 | return ret; |
| 827 | } |
| 828 | } |
| 829 | buffer += SECTOR_SIZE; |
| 830 | } |
| 831 | return 0; |
| 832 | } /* ftl_read */ |
| 833 | |
| 834 | /*====================================================================== |
| 835 | |
| 836 | Write a series of sectors to an FTL partition |
| 837 | |
| 838 | ======================================================================*/ |
| 839 | |
| 840 | static int set_bam_entry(partition_t *part, u_int32_t log_addr, |
| 841 | u_int32_t virt_addr) |
| 842 | { |
| 843 | u_int32_t bsize, blk, le_virt_addr; |
| 844 | #ifdef PSYCHO_DEBUG |
| 845 | u_int32_t old_addr; |
| 846 | #endif |
| 847 | u_int16_t eun; |
| 848 | int ret; |
| 849 | size_t retlen, offset; |
| 850 | |
| 851 | DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n", |
| 852 | part, log_addr, virt_addr); |
| 853 | bsize = 1 << part->header.EraseUnitSize; |
| 854 | eun = log_addr / bsize; |
| 855 | blk = (log_addr % bsize) / SECTOR_SIZE; |
| 856 | offset = (part->EUNInfo[eun].Offset + blk * sizeof(u_int32_t) + |
| 857 | le32_to_cpu(part->header.BAMOffset)); |
| 858 | |
| 859 | #ifdef PSYCHO_DEBUG |
| 860 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(u_int32_t), |
| 861 | &retlen, (u_char *)&old_addr); |
| 862 | if (ret) { |
| 863 | printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret); |
| 864 | return ret; |
| 865 | } |
| 866 | old_addr = le32_to_cpu(old_addr); |
| 867 | |
| 868 | if (((virt_addr == 0xfffffffe) && !BLOCK_FREE(old_addr)) || |
| 869 | ((virt_addr == 0) && (BLOCK_TYPE(old_addr) != BLOCK_DATA)) || |
| 870 | (!BLOCK_DELETED(virt_addr) && (old_addr != 0xfffffffe))) { |
| 871 | static int ne = 0; |
| 872 | if (++ne < 5) { |
| 873 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n"); |
| 874 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x" |
| 875 | ", new = 0x%x\n", log_addr, old_addr, virt_addr); |
| 876 | } |
| 877 | return -EIO; |
| 878 | } |
| 879 | #endif |
| 880 | le_virt_addr = cpu_to_le32(virt_addr); |
| 881 | if (part->bam_index == eun) { |
| 882 | #ifdef PSYCHO_DEBUG |
| 883 | if (le32_to_cpu(part->bam_cache[blk]) != old_addr) { |
| 884 | static int ne = 0; |
| 885 | if (++ne < 5) { |
| 886 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() " |
| 887 | "inconsistency!\n"); |
| 888 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache" |
| 889 | " = 0x%x\n", |
| 890 | le32_to_cpu(part->bam_cache[blk]), old_addr); |
| 891 | } |
| 892 | return -EIO; |
| 893 | } |
| 894 | #endif |
| 895 | part->bam_cache[blk] = le_virt_addr; |
| 896 | } |
| 897 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), |
| 898 | &retlen, (u_char *)&le_virt_addr); |
| 899 | |
| 900 | if (ret) { |
| 901 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n"); |
| 902 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n", |
| 903 | log_addr, virt_addr); |
| 904 | } |
| 905 | return ret; |
| 906 | } /* set_bam_entry */ |
| 907 | |
| 908 | static int ftl_write(partition_t *part, caddr_t buffer, |
| 909 | u_long sector, u_long nblocks) |
| 910 | { |
| 911 | u_int32_t bsize, log_addr, virt_addr, old_addr, blk; |
| 912 | u_long i; |
| 913 | int ret; |
| 914 | size_t retlen, offset; |
| 915 | |
| 916 | DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n", |
| 917 | part, sector, nblocks); |
| 918 | if (!(part->state & FTL_FORMATTED)) { |
| 919 | printk(KERN_NOTICE "ftl_cs: bad partition\n"); |
| 920 | return -EIO; |
| 921 | } |
| 922 | /* See if we need to reclaim space, before we start */ |
| 923 | while (part->FreeTotal < nblocks) { |
| 924 | ret = reclaim_block(part); |
| 925 | if (ret) |
| 926 | return ret; |
| 927 | } |
| 928 | |
| 929 | bsize = 1 << part->header.EraseUnitSize; |
| 930 | |
| 931 | virt_addr = sector * SECTOR_SIZE | BLOCK_DATA; |
| 932 | for (i = 0; i < nblocks; i++) { |
| 933 | if (virt_addr >= le32_to_cpu(part->header.FormattedSize)) { |
| 934 | printk(KERN_NOTICE "ftl_cs: bad write offset\n"); |
| 935 | return -EIO; |
| 936 | } |
| 937 | |
| 938 | /* Grab a free block */ |
| 939 | blk = find_free(part); |
| 940 | if (blk == 0) { |
| 941 | static int ne = 0; |
| 942 | if (++ne < 5) |
| 943 | printk(KERN_NOTICE "ftl_cs: internal error: " |
| 944 | "no free blocks!\n"); |
| 945 | return -ENOSPC; |
| 946 | } |
| 947 | |
| 948 | /* Tag the BAM entry, and write the new block */ |
| 949 | log_addr = part->bam_index * bsize + blk * SECTOR_SIZE; |
| 950 | part->EUNInfo[part->bam_index].Free--; |
| 951 | part->FreeTotal--; |
| 952 | if (set_bam_entry(part, log_addr, 0xfffffffe)) |
| 953 | return -EIO; |
| 954 | part->EUNInfo[part->bam_index].Deleted++; |
| 955 | offset = (part->EUNInfo[part->bam_index].Offset + |
| 956 | blk * SECTOR_SIZE); |
| 957 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, |
| 958 | buffer); |
| 959 | |
| 960 | if (ret) { |
| 961 | printk(KERN_NOTICE "ftl_cs: block write failed!\n"); |
| 962 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr" |
| 963 | " = 0x%x, Offset = 0x%zx\n", log_addr, virt_addr, |
| 964 | offset); |
| 965 | return -EIO; |
| 966 | } |
| 967 | |
| 968 | /* Only delete the old entry when the new entry is ready */ |
| 969 | old_addr = part->VirtualBlockMap[sector+i]; |
| 970 | if (old_addr != 0xffffffff) { |
| 971 | part->VirtualBlockMap[sector+i] = 0xffffffff; |
| 972 | part->EUNInfo[old_addr/bsize].Deleted++; |
| 973 | if (set_bam_entry(part, old_addr, 0)) |
| 974 | return -EIO; |
| 975 | } |
| 976 | |
| 977 | /* Finally, set up the new pointers */ |
| 978 | if (set_bam_entry(part, log_addr, virt_addr)) |
| 979 | return -EIO; |
| 980 | part->VirtualBlockMap[sector+i] = log_addr; |
| 981 | part->EUNInfo[part->bam_index].Deleted--; |
| 982 | |
| 983 | buffer += SECTOR_SIZE; |
| 984 | virt_addr += SECTOR_SIZE; |
| 985 | } |
| 986 | return 0; |
| 987 | } /* ftl_write */ |
| 988 | |
| 989 | static int ftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) |
| 990 | { |
| 991 | partition_t *part = (void *)dev; |
| 992 | u_long sect; |
| 993 | |
| 994 | /* Sort of arbitrary: round size down to 4KiB boundary */ |
| 995 | sect = le32_to_cpu(part->header.FormattedSize)/SECTOR_SIZE; |
| 996 | |
| 997 | geo->heads = 1; |
| 998 | geo->sectors = 8; |
| 999 | geo->cylinders = sect >> 3; |
| 1000 | |
| 1001 | return 0; |
| 1002 | } |
| 1003 | |
| 1004 | static int ftl_readsect(struct mtd_blktrans_dev *dev, |
| 1005 | unsigned long block, char *buf) |
| 1006 | { |
| 1007 | return ftl_read((void *)dev, buf, block, 1); |
| 1008 | } |
| 1009 | |
| 1010 | static int ftl_writesect(struct mtd_blktrans_dev *dev, |
| 1011 | unsigned long block, char *buf) |
| 1012 | { |
| 1013 | return ftl_write((void *)dev, buf, block, 1); |
| 1014 | } |
| 1015 | |
| 1016 | /*====================================================================*/ |
| 1017 | |
| 1018 | void ftl_freepart(partition_t *part) |
| 1019 | { |
| 1020 | if (part->VirtualBlockMap) { |
| 1021 | vfree(part->VirtualBlockMap); |
| 1022 | part->VirtualBlockMap = NULL; |
| 1023 | } |
| 1024 | if (part->VirtualPageMap) { |
| 1025 | kfree(part->VirtualPageMap); |
| 1026 | part->VirtualPageMap = NULL; |
| 1027 | } |
| 1028 | if (part->EUNInfo) { |
| 1029 | kfree(part->EUNInfo); |
| 1030 | part->EUNInfo = NULL; |
| 1031 | } |
| 1032 | if (part->XferInfo) { |
| 1033 | kfree(part->XferInfo); |
| 1034 | part->XferInfo = NULL; |
| 1035 | } |
| 1036 | if (part->bam_cache) { |
| 1037 | kfree(part->bam_cache); |
| 1038 | part->bam_cache = NULL; |
| 1039 | } |
| 1040 | |
| 1041 | } /* ftl_freepart */ |
| 1042 | |
| 1043 | static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) |
| 1044 | { |
| 1045 | partition_t *partition; |
| 1046 | |
| 1047 | partition = kmalloc(sizeof(partition_t), GFP_KERNEL); |
| 1048 | |
| 1049 | if (!partition) { |
| 1050 | printk(KERN_WARNING "No memory to scan for FTL on %s\n", |
| 1051 | mtd->name); |
| 1052 | return; |
| 1053 | } |
| 1054 | |
| 1055 | memset(partition, 0, sizeof(partition_t)); |
| 1056 | |
| 1057 | partition->mbd.mtd = mtd; |
| 1058 | |
| 1059 | if ((scan_header(partition) == 0) && |
| 1060 | (build_maps(partition) == 0)) { |
| 1061 | |
| 1062 | partition->state = FTL_FORMATTED; |
| 1063 | #ifdef PCMCIA_DEBUG |
| 1064 | printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n", |
| 1065 | le32_to_cpu(partition->header.FormattedSize) >> 10); |
| 1066 | #endif |
| 1067 | partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9; |
| 1068 | partition->mbd.blksize = SECTOR_SIZE; |
| 1069 | partition->mbd.tr = tr; |
| 1070 | partition->mbd.devnum = -1; |
| 1071 | if (!add_mtd_blktrans_dev((void *)partition)) |
| 1072 | return; |
| 1073 | } |
| 1074 | |
| 1075 | ftl_freepart(partition); |
| 1076 | kfree(partition); |
| 1077 | } |
| 1078 | |
| 1079 | static void ftl_remove_dev(struct mtd_blktrans_dev *dev) |
| 1080 | { |
| 1081 | del_mtd_blktrans_dev(dev); |
| 1082 | ftl_freepart((partition_t *)dev); |
| 1083 | kfree(dev); |
| 1084 | } |
| 1085 | |
| 1086 | struct mtd_blktrans_ops ftl_tr = { |
| 1087 | .name = "ftl", |
| 1088 | .major = FTL_MAJOR, |
| 1089 | .part_bits = PART_BITS, |
| 1090 | .readsect = ftl_readsect, |
| 1091 | .writesect = ftl_writesect, |
| 1092 | .getgeo = ftl_getgeo, |
| 1093 | .add_mtd = ftl_add_mtd, |
| 1094 | .remove_dev = ftl_remove_dev, |
| 1095 | .owner = THIS_MODULE, |
| 1096 | }; |
| 1097 | |
| 1098 | int init_ftl(void) |
| 1099 | { |
Herbert Valerio Riedel | 8ea2e06 | 2005-01-17 13:47:24 +0000 | [diff] [blame] | 1100 | DEBUG(0, "$Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1101 | |
| 1102 | return register_mtd_blktrans(&ftl_tr); |
| 1103 | } |
| 1104 | |
| 1105 | static void __exit cleanup_ftl(void) |
| 1106 | { |
| 1107 | deregister_mtd_blktrans(&ftl_tr); |
| 1108 | } |
| 1109 | |
| 1110 | module_init(init_ftl); |
| 1111 | module_exit(cleanup_ftl); |
| 1112 | |
| 1113 | |
| 1114 | MODULE_LICENSE("Dual MPL/GPL"); |
| 1115 | MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); |
| 1116 | MODULE_DESCRIPTION("Support code for Flash Translation Layer, used on PCMCIA devices"); |