Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Abilis Systems TB101 SOC device tree |
| 3 | * |
| 4 | * Copyright (C) Abilis Systems 2013 |
| 5 | * |
| 6 | * Author: Christian Ruppert <christian.ruppert@abilis.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 20 | */ |
| 21 | |
| 22 | /include/ "abilis_tb10x.dtsi" |
| 23 | |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 24 | |
| 25 | / { |
| 26 | clock-frequency = <500000000>; /* 500 MHZ */ |
| 27 | |
| 28 | soc100 { |
| 29 | bus-frequency = <166666666>; |
| 30 | |
| 31 | pll0: oscillator { |
| 32 | clock-frequency = <1000000000>; |
| 33 | }; |
| 34 | cpu_clk: clkdiv_cpu { |
| 35 | clock-mult = <1>; |
| 36 | clock-div = <2>; |
| 37 | }; |
| 38 | ahb_clk: clkdiv_ahb { |
| 39 | clock-mult = <1>; |
| 40 | clock-div = <6>; |
| 41 | }; |
| 42 | |
| 43 | iomux: iomux@FF10601c { |
| 44 | /* Port 1 */ |
| 45 | pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ |
| 46 | pingrp = "mis0_pins"; |
| 47 | }; |
| 48 | pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ |
| 49 | pingrp = "mis1_pins"; |
| 50 | }; |
| 51 | pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ |
| 52 | pingrp = "gpioa_pins"; |
| 53 | }; |
| 54 | pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ |
| 55 | pingrp = "mip1_pins"; |
| 56 | }; |
| 57 | /* Port 2 */ |
| 58 | pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ |
| 59 | pingrp = "mis2_pins"; |
| 60 | }; |
| 61 | pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ |
| 62 | pingrp = "mis3_pins"; |
| 63 | }; |
| 64 | pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ |
| 65 | pingrp = "gpioc_pins"; |
| 66 | }; |
| 67 | pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ |
| 68 | pingrp = "mip3_pins"; |
| 69 | }; |
| 70 | /* Port 3 */ |
| 71 | pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ |
| 72 | pingrp = "mis4_pins"; |
| 73 | }; |
| 74 | pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ |
| 75 | pingrp = "mis5_pins"; |
| 76 | }; |
| 77 | pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ |
| 78 | pingrp = "gpioe_pins"; |
| 79 | }; |
| 80 | pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ |
| 81 | pingrp = "mip5_pins"; |
| 82 | }; |
| 83 | /* Port 4 */ |
| 84 | pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ |
| 85 | pingrp = "mis6_pins"; |
| 86 | }; |
| 87 | pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ |
| 88 | pingrp = "mis7_pins"; |
| 89 | }; |
| 90 | pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ |
| 91 | pingrp = "gpiog_pins"; |
| 92 | }; |
| 93 | pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ |
| 94 | pingrp = "mip7_pins"; |
| 95 | }; |
| 96 | /* Port 5 */ |
| 97 | pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ |
| 98 | pingrp = "gpioj_pins"; |
| 99 | }; |
| 100 | pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ |
| 101 | pingrp = "gpiok_pins"; |
| 102 | }; |
| 103 | pctl_ciplus: pctl-ciplus { /* CI+ interface */ |
| 104 | pingrp = "ciplus_pins"; |
| 105 | }; |
| 106 | pctl_mcard: pctl-mcard { /* M-Card interface */ |
| 107 | pingrp = "mcard_pins"; |
| 108 | }; |
| 109 | pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ |
| 110 | pingrp = "stc0_pins"; |
| 111 | }; |
| 112 | pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ |
| 113 | pingrp = "stc1_pins"; |
| 114 | }; |
| 115 | /* Port 6 */ |
| 116 | pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ |
| 117 | pingrp = "mop_pins"; |
| 118 | }; |
| 119 | pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ |
| 120 | pingrp = "mos0_pins"; |
| 121 | }; |
| 122 | pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ |
| 123 | pingrp = "mos1_pins"; |
| 124 | }; |
| 125 | pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ |
| 126 | pingrp = "mos2_pins"; |
| 127 | }; |
| 128 | pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ |
| 129 | pingrp = "mos3_pins"; |
| 130 | }; |
| 131 | /* Port 7 */ |
| 132 | pctl_uart0: pctl-uart0 { /* UART 0 */ |
| 133 | pingrp = "uart0_pins"; |
| 134 | }; |
| 135 | pctl_uart1: pctl-uart1 { /* UART 1 */ |
| 136 | pingrp = "uart1_pins"; |
| 137 | }; |
| 138 | pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ |
| 139 | pingrp = "gpiol_pins"; |
| 140 | }; |
| 141 | pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ |
| 142 | pingrp = "gpiom_pins"; |
| 143 | }; |
| 144 | /* Port 8 */ |
| 145 | pctl_spi3: pctl-spi3 { |
| 146 | pingrp = "spi3_pins"; |
| 147 | }; |
| 148 | pctl_jtag: pctl-jtag { |
| 149 | pingrp = "jtag_pins"; |
| 150 | }; |
| 151 | /* Port 9 */ |
| 152 | pctl_spi1: pctl-spi1 { |
| 153 | pingrp = "spi1_pins"; |
| 154 | }; |
| 155 | pctl_gpio_n: pctl-gpio-n { |
| 156 | pingrp = "gpion_pins"; |
| 157 | }; |
| 158 | /* Unmuxed GPIOs */ |
| 159 | pctl_gpio_b: pctl-gpio-b { |
| 160 | pingrp = "gpiob_pins"; |
| 161 | }; |
| 162 | pctl_gpio_d: pctl-gpio-d { |
| 163 | pingrp = "gpiod_pins"; |
| 164 | }; |
| 165 | pctl_gpio_f: pctl-gpio-f { |
| 166 | pingrp = "gpiof_pins"; |
| 167 | }; |
| 168 | pctl_gpio_h: pctl-gpio-h { |
| 169 | pingrp = "gpioh_pins"; |
| 170 | }; |
| 171 | pctl_gpio_i: pctl-gpio-i { |
| 172 | pingrp = "gpioi_pins"; |
| 173 | }; |
| 174 | }; |
| 175 | |
| 176 | gpioa: gpio@FF140000 { |
| 177 | compatible = "abilis,tb10x-gpio"; |
| 178 | interrupt-controller; |
| 179 | #interrupt-cells = <1>; |
| 180 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 181 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 182 | reg = <0xFF140000 0x1000>; |
| 183 | gpio-controller; |
| 184 | #gpio-cells = <1>; |
| 185 | gpio-base = <0>; |
| 186 | gpio-pins = <&pctl_gpio_a>; |
| 187 | }; |
| 188 | gpiob: gpio@FF141000 { |
| 189 | compatible = "abilis,tb10x-gpio"; |
| 190 | interrupt-controller; |
| 191 | #interrupt-cells = <1>; |
| 192 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 193 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 194 | reg = <0xFF141000 0x1000>; |
| 195 | gpio-controller; |
| 196 | #gpio-cells = <1>; |
| 197 | gpio-base = <3>; |
| 198 | gpio-pins = <&pctl_gpio_b>; |
| 199 | }; |
| 200 | gpioc: gpio@FF142000 { |
| 201 | compatible = "abilis,tb10x-gpio"; |
| 202 | interrupt-controller; |
| 203 | #interrupt-cells = <1>; |
| 204 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 205 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 206 | reg = <0xFF142000 0x1000>; |
| 207 | gpio-controller; |
| 208 | #gpio-cells = <1>; |
| 209 | gpio-base = <5>; |
| 210 | gpio-pins = <&pctl_gpio_c>; |
| 211 | }; |
| 212 | gpiod: gpio@FF143000 { |
| 213 | compatible = "abilis,tb10x-gpio"; |
| 214 | interrupt-controller; |
| 215 | #interrupt-cells = <1>; |
| 216 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 217 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 218 | reg = <0xFF143000 0x1000>; |
| 219 | gpio-controller; |
| 220 | #gpio-cells = <1>; |
| 221 | gpio-base = <8>; |
| 222 | gpio-pins = <&pctl_gpio_d>; |
| 223 | }; |
| 224 | gpioe: gpio@FF144000 { |
| 225 | compatible = "abilis,tb10x-gpio"; |
| 226 | interrupt-controller; |
| 227 | #interrupt-cells = <1>; |
| 228 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 229 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 230 | reg = <0xFF144000 0x1000>; |
| 231 | gpio-controller; |
| 232 | #gpio-cells = <1>; |
| 233 | gpio-base = <10>; |
| 234 | gpio-pins = <&pctl_gpio_e>; |
| 235 | }; |
| 236 | gpiof: gpio@FF145000 { |
| 237 | compatible = "abilis,tb10x-gpio"; |
| 238 | interrupt-controller; |
| 239 | #interrupt-cells = <1>; |
| 240 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 241 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 242 | reg = <0xFF145000 0x1000>; |
| 243 | gpio-controller; |
| 244 | #gpio-cells = <1>; |
| 245 | gpio-base = <13>; |
| 246 | gpio-pins = <&pctl_gpio_f>; |
| 247 | }; |
| 248 | gpiog: gpio@FF146000 { |
| 249 | compatible = "abilis,tb10x-gpio"; |
| 250 | interrupt-controller; |
| 251 | #interrupt-cells = <1>; |
| 252 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 253 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 254 | reg = <0xFF146000 0x1000>; |
| 255 | gpio-controller; |
| 256 | #gpio-cells = <1>; |
| 257 | gpio-base = <15>; |
| 258 | gpio-pins = <&pctl_gpio_g>; |
| 259 | }; |
| 260 | gpioh: gpio@FF147000 { |
| 261 | compatible = "abilis,tb10x-gpio"; |
| 262 | interrupt-controller; |
| 263 | #interrupt-cells = <1>; |
| 264 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 265 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 266 | reg = <0xFF147000 0x1000>; |
| 267 | gpio-controller; |
| 268 | #gpio-cells = <1>; |
| 269 | gpio-base = <18>; |
| 270 | gpio-pins = <&pctl_gpio_h>; |
| 271 | }; |
| 272 | gpioi: gpio@FF148000 { |
| 273 | compatible = "abilis,tb10x-gpio"; |
| 274 | interrupt-controller; |
| 275 | #interrupt-cells = <1>; |
| 276 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 277 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 278 | reg = <0xFF148000 0x1000>; |
| 279 | gpio-controller; |
| 280 | #gpio-cells = <1>; |
| 281 | gpio-base = <20>; |
| 282 | gpio-pins = <&pctl_gpio_i>; |
| 283 | }; |
| 284 | gpioj: gpio@FF149000 { |
| 285 | compatible = "abilis,tb10x-gpio"; |
| 286 | interrupt-controller; |
| 287 | #interrupt-cells = <1>; |
| 288 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 289 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 290 | reg = <0xFF149000 0x1000>; |
| 291 | gpio-controller; |
| 292 | #gpio-cells = <1>; |
| 293 | gpio-base = <32>; |
| 294 | gpio-pins = <&pctl_gpio_j>; |
| 295 | }; |
| 296 | gpiok: gpio@FF14a000 { |
| 297 | compatible = "abilis,tb10x-gpio"; |
| 298 | interrupt-controller; |
| 299 | #interrupt-cells = <1>; |
| 300 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 301 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 302 | reg = <0xFF14A000 0x1000>; |
| 303 | gpio-controller; |
| 304 | #gpio-cells = <1>; |
| 305 | gpio-base = <64>; |
| 306 | gpio-pins = <&pctl_gpio_k>; |
| 307 | }; |
| 308 | gpiol: gpio@FF14b000 { |
| 309 | compatible = "abilis,tb10x-gpio"; |
| 310 | interrupt-controller; |
| 311 | #interrupt-cells = <1>; |
| 312 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 313 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 314 | reg = <0xFF14B000 0x1000>; |
| 315 | gpio-controller; |
| 316 | #gpio-cells = <1>; |
| 317 | gpio-base = <86>; |
| 318 | gpio-pins = <&pctl_gpio_l>; |
| 319 | }; |
| 320 | gpiom: gpio@FF14c000 { |
| 321 | compatible = "abilis,tb10x-gpio"; |
| 322 | interrupt-controller; |
| 323 | #interrupt-cells = <1>; |
| 324 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 325 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 326 | reg = <0xFF14C000 0x1000>; |
| 327 | gpio-controller; |
| 328 | #gpio-cells = <1>; |
| 329 | gpio-base = <90>; |
| 330 | gpio-pins = <&pctl_gpio_m>; |
| 331 | }; |
| 332 | gpion: gpio@FF14d000 { |
| 333 | compatible = "abilis,tb10x-gpio"; |
| 334 | interrupt-controller; |
| 335 | #interrupt-cells = <1>; |
| 336 | interrupt-parent = <&tb10x_ictl>; |
Christian Ruppert | 723e2b8 | 2013-06-26 16:01:28 +0200 | [diff] [blame^] | 337 | interrupts = <27 2>; |
Christian Ruppert | 2eb9504 | 2013-04-11 15:19:40 +0200 | [diff] [blame] | 338 | reg = <0xFF14D000 0x1000>; |
| 339 | gpio-controller; |
| 340 | #gpio-cells = <1>; |
| 341 | gpio-base = <94>; |
| 342 | gpio-pins = <&pctl_gpio_n>; |
| 343 | }; |
| 344 | }; |
| 345 | }; |