Kamil Debski | 06fb013 | 2014-03-06 12:16:48 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Samsung SoC USB 1.1/2.0 PHY driver |
| 3 | * |
| 4 | * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| 5 | * Author: Kamil Debski <k.debski@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/mfd/syscon.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/of_address.h> |
| 17 | #include <linux/phy/phy.h> |
| 18 | #include <linux/platform_device.h> |
| 19 | #include <linux/spinlock.h> |
| 20 | #include "phy-samsung-usb2.h" |
| 21 | |
| 22 | static int samsung_usb2_phy_power_on(struct phy *phy) |
| 23 | { |
| 24 | struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); |
| 25 | struct samsung_usb2_phy_driver *drv = inst->drv; |
| 26 | int ret; |
| 27 | |
| 28 | dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", |
| 29 | inst->cfg->label); |
| 30 | ret = clk_prepare_enable(drv->clk); |
| 31 | if (ret) |
| 32 | goto err_main_clk; |
| 33 | ret = clk_prepare_enable(drv->ref_clk); |
| 34 | if (ret) |
| 35 | goto err_instance_clk; |
| 36 | if (inst->cfg->power_on) { |
| 37 | spin_lock(&drv->lock); |
| 38 | ret = inst->cfg->power_on(inst); |
| 39 | spin_unlock(&drv->lock); |
| 40 | } |
| 41 | |
| 42 | return 0; |
| 43 | |
| 44 | err_instance_clk: |
| 45 | clk_disable_unprepare(drv->clk); |
| 46 | err_main_clk: |
| 47 | return ret; |
| 48 | } |
| 49 | |
| 50 | static int samsung_usb2_phy_power_off(struct phy *phy) |
| 51 | { |
| 52 | struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); |
| 53 | struct samsung_usb2_phy_driver *drv = inst->drv; |
| 54 | int ret = 0; |
| 55 | |
| 56 | dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", |
| 57 | inst->cfg->label); |
| 58 | if (inst->cfg->power_off) { |
| 59 | spin_lock(&drv->lock); |
| 60 | ret = inst->cfg->power_off(inst); |
| 61 | spin_unlock(&drv->lock); |
| 62 | } |
| 63 | clk_disable_unprepare(drv->ref_clk); |
| 64 | clk_disable_unprepare(drv->clk); |
| 65 | return ret; |
| 66 | } |
| 67 | |
| 68 | static struct phy_ops samsung_usb2_phy_ops = { |
| 69 | .power_on = samsung_usb2_phy_power_on, |
| 70 | .power_off = samsung_usb2_phy_power_off, |
| 71 | .owner = THIS_MODULE, |
| 72 | }; |
| 73 | |
| 74 | static struct phy *samsung_usb2_phy_xlate(struct device *dev, |
| 75 | struct of_phandle_args *args) |
| 76 | { |
| 77 | struct samsung_usb2_phy_driver *drv; |
| 78 | |
| 79 | drv = dev_get_drvdata(dev); |
| 80 | if (!drv) |
| 81 | return ERR_PTR(-EINVAL); |
| 82 | |
| 83 | if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) |
| 84 | return ERR_PTR(-ENODEV); |
| 85 | |
| 86 | return drv->instances[args->args[0]].phy; |
| 87 | } |
| 88 | |
| 89 | static const struct of_device_id samsung_usb2_phy_of_match[] = { |
| 90 | #ifdef CONFIG_PHY_EXYNOS4210_USB2 |
| 91 | { |
| 92 | .compatible = "samsung,exynos4210-usb2-phy", |
| 93 | .data = &exynos4210_usb2_phy_config, |
| 94 | }, |
| 95 | #endif |
| 96 | #ifdef CONFIG_PHY_EXYNOS4X12_USB2 |
| 97 | { |
| 98 | .compatible = "samsung,exynos4x12-usb2-phy", |
| 99 | .data = &exynos4x12_usb2_phy_config, |
| 100 | }, |
| 101 | #endif |
Kamil Debski | 64bf2b2 | 2014-03-06 12:16:49 +0100 | [diff] [blame] | 102 | #ifdef CONFIG_PHY_EXYNOS5250_USB2 |
| 103 | { |
| 104 | .compatible = "samsung,exynos5250-usb2-phy", |
| 105 | .data = &exynos5250_usb2_phy_config, |
| 106 | }, |
| 107 | #endif |
Kamil Debski | 06fb013 | 2014-03-06 12:16:48 +0100 | [diff] [blame] | 108 | { }, |
| 109 | }; |
| 110 | |
| 111 | static int samsung_usb2_phy_probe(struct platform_device *pdev) |
| 112 | { |
| 113 | const struct of_device_id *match; |
| 114 | const struct samsung_usb2_phy_config *cfg; |
| 115 | struct device *dev = &pdev->dev; |
| 116 | struct phy_provider *phy_provider; |
| 117 | struct resource *mem; |
| 118 | struct samsung_usb2_phy_driver *drv; |
| 119 | int i, ret; |
| 120 | |
| 121 | if (!pdev->dev.of_node) { |
| 122 | dev_err(dev, "This driver is required to be instantiated from device tree\n"); |
| 123 | return -EINVAL; |
| 124 | } |
| 125 | |
| 126 | match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node); |
| 127 | if (!match) { |
| 128 | dev_err(dev, "of_match_node() failed\n"); |
| 129 | return -EINVAL; |
| 130 | } |
| 131 | cfg = match->data; |
| 132 | |
| 133 | drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + |
| 134 | cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), |
| 135 | GFP_KERNEL); |
| 136 | if (!drv) |
| 137 | return -ENOMEM; |
| 138 | |
| 139 | dev_set_drvdata(dev, drv); |
| 140 | spin_lock_init(&drv->lock); |
| 141 | |
| 142 | drv->cfg = cfg; |
| 143 | drv->dev = dev; |
| 144 | |
| 145 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 146 | drv->reg_phy = devm_ioremap_resource(dev, mem); |
| 147 | if (IS_ERR(drv->reg_phy)) { |
| 148 | dev_err(dev, "Failed to map register memory (phy)\n"); |
| 149 | return PTR_ERR(drv->reg_phy); |
| 150 | } |
| 151 | |
| 152 | drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, |
| 153 | "samsung,pmureg-phandle"); |
| 154 | if (IS_ERR(drv->reg_pmu)) { |
| 155 | dev_err(dev, "Failed to map PMU registers (via syscon)\n"); |
| 156 | return PTR_ERR(drv->reg_pmu); |
| 157 | } |
| 158 | |
| 159 | if (drv->cfg->has_mode_switch) { |
| 160 | drv->reg_sys = syscon_regmap_lookup_by_phandle( |
| 161 | pdev->dev.of_node, "samsung,sysreg-phandle"); |
| 162 | if (IS_ERR(drv->reg_sys)) { |
| 163 | dev_err(dev, "Failed to map system registers (via syscon)\n"); |
| 164 | return PTR_ERR(drv->reg_sys); |
| 165 | } |
| 166 | } |
| 167 | |
| 168 | drv->clk = devm_clk_get(dev, "phy"); |
| 169 | if (IS_ERR(drv->clk)) { |
| 170 | dev_err(dev, "Failed to get clock of phy controller\n"); |
| 171 | return PTR_ERR(drv->clk); |
| 172 | } |
| 173 | |
| 174 | drv->ref_clk = devm_clk_get(dev, "ref"); |
| 175 | if (IS_ERR(drv->ref_clk)) { |
| 176 | dev_err(dev, "Failed to get reference clock for the phy controller\n"); |
| 177 | return PTR_ERR(drv->ref_clk); |
| 178 | } |
| 179 | |
| 180 | drv->ref_rate = clk_get_rate(drv->ref_clk); |
| 181 | if (drv->cfg->rate_to_clk) { |
| 182 | ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); |
| 183 | if (ret) |
| 184 | return ret; |
| 185 | } |
| 186 | |
| 187 | for (i = 0; i < drv->cfg->num_phys; i++) { |
| 188 | char *label = drv->cfg->phys[i].label; |
| 189 | struct samsung_usb2_phy_instance *p = &drv->instances[i]; |
| 190 | |
| 191 | dev_dbg(dev, "Creating phy \"%s\"\n", label); |
| 192 | p->phy = devm_phy_create(dev, &samsung_usb2_phy_ops, NULL); |
| 193 | if (IS_ERR(p->phy)) { |
| 194 | dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", |
| 195 | label); |
| 196 | return PTR_ERR(p->phy); |
| 197 | } |
| 198 | |
| 199 | p->cfg = &drv->cfg->phys[i]; |
| 200 | p->drv = drv; |
| 201 | phy_set_bus_width(p->phy, 8); |
| 202 | phy_set_drvdata(p->phy, p); |
| 203 | } |
| 204 | |
| 205 | phy_provider = devm_of_phy_provider_register(dev, |
| 206 | samsung_usb2_phy_xlate); |
| 207 | if (IS_ERR(phy_provider)) { |
| 208 | dev_err(drv->dev, "Failed to register phy provider\n"); |
| 209 | return PTR_ERR(phy_provider); |
| 210 | } |
| 211 | |
| 212 | return 0; |
| 213 | } |
| 214 | |
| 215 | static struct platform_driver samsung_usb2_phy_driver = { |
| 216 | .probe = samsung_usb2_phy_probe, |
| 217 | .driver = { |
| 218 | .of_match_table = samsung_usb2_phy_of_match, |
| 219 | .name = "samsung-usb2-phy", |
| 220 | .owner = THIS_MODULE, |
| 221 | } |
| 222 | }; |
| 223 | |
| 224 | module_platform_driver(samsung_usb2_phy_driver); |
| 225 | MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); |
| 226 | MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); |
| 227 | MODULE_LICENSE("GPL v2"); |
| 228 | MODULE_ALIAS("platform:samsung-usb2-phy"); |