Peter Rosin | 7fde148 | 2016-11-08 12:58:56 +0100 | [diff] [blame] | 1 | /* |
| 2 | * IIO DAC emulation driver using a digital potentiometer |
| 3 | * |
| 4 | * Copyright (C) 2016 Axentia Technologies AB |
| 5 | * |
| 6 | * Author: Peter Rosin <peda@axentia.se> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | /* |
| 14 | * It is assumed that the dpot is used as a voltage divider between the |
| 15 | * current dpot wiper setting and the maximum resistance of the dpot. The |
| 16 | * divided voltage is provided by a vref regulator. |
| 17 | * |
| 18 | * .------. |
| 19 | * .-----------. | | |
| 20 | * | vref |--' .---. |
| 21 | * | regulator |--. | | |
| 22 | * '-----------' | | d | |
| 23 | * | | p | |
| 24 | * | | o | wiper |
| 25 | * | | t |<---------+ |
| 26 | * | | | |
| 27 | * | '---' dac output voltage |
| 28 | * | | |
| 29 | * '------+------------+ |
| 30 | */ |
| 31 | |
| 32 | #include <linux/err.h> |
| 33 | #include <linux/iio/consumer.h> |
| 34 | #include <linux/iio/iio.h> |
| 35 | #include <linux/module.h> |
| 36 | #include <linux/of.h> |
| 37 | #include <linux/platform_device.h> |
| 38 | #include <linux/regulator/consumer.h> |
| 39 | |
| 40 | struct dpot_dac { |
| 41 | struct regulator *vref; |
| 42 | struct iio_channel *dpot; |
| 43 | u32 max_ohms; |
| 44 | }; |
| 45 | |
| 46 | static const struct iio_chan_spec dpot_dac_iio_channel = { |
| 47 | .type = IIO_VOLTAGE, |
| 48 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
| 49 | | BIT(IIO_CHAN_INFO_SCALE), |
| 50 | .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), |
| 51 | .output = 1, |
| 52 | .indexed = 1, |
| 53 | }; |
| 54 | |
| 55 | static int dpot_dac_read_raw(struct iio_dev *indio_dev, |
| 56 | struct iio_chan_spec const *chan, |
| 57 | int *val, int *val2, long mask) |
| 58 | { |
| 59 | struct dpot_dac *dac = iio_priv(indio_dev); |
| 60 | int ret; |
| 61 | unsigned long long tmp; |
| 62 | |
| 63 | switch (mask) { |
| 64 | case IIO_CHAN_INFO_RAW: |
| 65 | return iio_read_channel_raw(dac->dpot, val); |
| 66 | |
| 67 | case IIO_CHAN_INFO_SCALE: |
| 68 | ret = iio_read_channel_scale(dac->dpot, val, val2); |
| 69 | switch (ret) { |
| 70 | case IIO_VAL_FRACTIONAL_LOG2: |
| 71 | tmp = *val * 1000000000LL; |
| 72 | do_div(tmp, dac->max_ohms); |
| 73 | tmp *= regulator_get_voltage(dac->vref) / 1000; |
| 74 | do_div(tmp, 1000000000LL); |
| 75 | *val = tmp; |
| 76 | return ret; |
| 77 | case IIO_VAL_INT: |
| 78 | /* |
| 79 | * Convert integer scale to fractional scale by |
| 80 | * setting the denominator (val2) to one... |
| 81 | */ |
| 82 | *val2 = 1; |
| 83 | ret = IIO_VAL_FRACTIONAL; |
| 84 | /* ...and fall through. */ |
| 85 | case IIO_VAL_FRACTIONAL: |
| 86 | *val *= regulator_get_voltage(dac->vref) / 1000; |
| 87 | *val2 *= dac->max_ohms; |
| 88 | break; |
| 89 | } |
| 90 | |
| 91 | return ret; |
| 92 | } |
| 93 | |
| 94 | return -EINVAL; |
| 95 | } |
| 96 | |
| 97 | static int dpot_dac_read_avail(struct iio_dev *indio_dev, |
| 98 | struct iio_chan_spec const *chan, |
| 99 | const int **vals, int *type, int *length, |
| 100 | long mask) |
| 101 | { |
| 102 | struct dpot_dac *dac = iio_priv(indio_dev); |
| 103 | |
| 104 | switch (mask) { |
| 105 | case IIO_CHAN_INFO_RAW: |
| 106 | *type = IIO_VAL_INT; |
| 107 | return iio_read_avail_channel_raw(dac->dpot, vals, length); |
| 108 | } |
| 109 | |
| 110 | return -EINVAL; |
| 111 | } |
| 112 | |
| 113 | static int dpot_dac_write_raw(struct iio_dev *indio_dev, |
| 114 | struct iio_chan_spec const *chan, |
| 115 | int val, int val2, long mask) |
| 116 | { |
| 117 | struct dpot_dac *dac = iio_priv(indio_dev); |
| 118 | |
| 119 | switch (mask) { |
| 120 | case IIO_CHAN_INFO_RAW: |
| 121 | return iio_write_channel_raw(dac->dpot, val); |
| 122 | } |
| 123 | |
| 124 | return -EINVAL; |
| 125 | } |
| 126 | |
| 127 | static const struct iio_info dpot_dac_info = { |
| 128 | .read_raw = dpot_dac_read_raw, |
| 129 | .read_avail = dpot_dac_read_avail, |
| 130 | .write_raw = dpot_dac_write_raw, |
| 131 | .driver_module = THIS_MODULE, |
| 132 | }; |
| 133 | |
| 134 | static int dpot_dac_channel_max_ohms(struct iio_dev *indio_dev) |
| 135 | { |
| 136 | struct device *dev = &indio_dev->dev; |
| 137 | struct dpot_dac *dac = iio_priv(indio_dev); |
| 138 | unsigned long long tmp; |
| 139 | int ret; |
| 140 | int val; |
| 141 | int val2; |
| 142 | int max; |
| 143 | |
| 144 | ret = iio_read_max_channel_raw(dac->dpot, &max); |
| 145 | if (ret < 0) { |
| 146 | dev_err(dev, "dpot does not indicate its raw maximum value\n"); |
| 147 | return ret; |
| 148 | } |
| 149 | |
| 150 | switch (iio_read_channel_scale(dac->dpot, &val, &val2)) { |
| 151 | case IIO_VAL_INT: |
| 152 | return max * val; |
| 153 | case IIO_VAL_FRACTIONAL: |
| 154 | tmp = (unsigned long long)max * val; |
| 155 | do_div(tmp, val2); |
| 156 | return tmp; |
| 157 | case IIO_VAL_FRACTIONAL_LOG2: |
| 158 | tmp = val * 1000000000LL * max >> val2; |
| 159 | do_div(tmp, 1000000000LL); |
| 160 | return tmp; |
| 161 | default: |
| 162 | dev_err(dev, "dpot has a scale that is too weird\n"); |
| 163 | } |
| 164 | |
| 165 | return -EINVAL; |
| 166 | } |
| 167 | |
| 168 | static int dpot_dac_probe(struct platform_device *pdev) |
| 169 | { |
| 170 | struct device *dev = &pdev->dev; |
| 171 | struct iio_dev *indio_dev; |
| 172 | struct dpot_dac *dac; |
| 173 | enum iio_chan_type type; |
| 174 | int ret; |
| 175 | |
| 176 | indio_dev = devm_iio_device_alloc(dev, sizeof(*dac)); |
| 177 | if (!indio_dev) |
| 178 | return -ENOMEM; |
| 179 | |
| 180 | platform_set_drvdata(pdev, indio_dev); |
| 181 | dac = iio_priv(indio_dev); |
| 182 | |
| 183 | indio_dev->name = dev_name(dev); |
| 184 | indio_dev->dev.parent = dev; |
| 185 | indio_dev->info = &dpot_dac_info; |
| 186 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 187 | indio_dev->channels = &dpot_dac_iio_channel; |
| 188 | indio_dev->num_channels = 1; |
| 189 | |
| 190 | dac->vref = devm_regulator_get(dev, "vref"); |
| 191 | if (IS_ERR(dac->vref)) { |
| 192 | if (PTR_ERR(dac->vref) != -EPROBE_DEFER) |
| 193 | dev_err(&pdev->dev, "failed to get vref regulator\n"); |
| 194 | return PTR_ERR(dac->vref); |
| 195 | } |
| 196 | |
| 197 | dac->dpot = devm_iio_channel_get(dev, "dpot"); |
| 198 | if (IS_ERR(dac->dpot)) { |
| 199 | if (PTR_ERR(dac->dpot) != -EPROBE_DEFER) |
| 200 | dev_err(dev, "failed to get dpot input channel\n"); |
| 201 | return PTR_ERR(dac->dpot); |
| 202 | } |
| 203 | |
| 204 | ret = iio_get_channel_type(dac->dpot, &type); |
| 205 | if (ret < 0) |
| 206 | return ret; |
| 207 | |
| 208 | if (type != IIO_RESISTANCE) { |
| 209 | dev_err(dev, "dpot is of the wrong type\n"); |
| 210 | return -EINVAL; |
| 211 | } |
| 212 | |
| 213 | ret = dpot_dac_channel_max_ohms(indio_dev); |
| 214 | if (ret < 0) |
| 215 | return ret; |
| 216 | dac->max_ohms = ret; |
| 217 | |
| 218 | ret = regulator_enable(dac->vref); |
| 219 | if (ret) { |
| 220 | dev_err(dev, "failed to enable the vref regulator\n"); |
| 221 | return ret; |
| 222 | } |
| 223 | |
| 224 | ret = iio_device_register(indio_dev); |
| 225 | if (ret) { |
| 226 | dev_err(dev, "failed to register iio device\n"); |
| 227 | goto disable_reg; |
| 228 | } |
| 229 | |
| 230 | return 0; |
| 231 | |
| 232 | disable_reg: |
| 233 | regulator_disable(dac->vref); |
| 234 | return ret; |
| 235 | } |
| 236 | |
| 237 | static int dpot_dac_remove(struct platform_device *pdev) |
| 238 | { |
| 239 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 240 | struct dpot_dac *dac = iio_priv(indio_dev); |
| 241 | |
| 242 | iio_device_unregister(indio_dev); |
| 243 | regulator_disable(dac->vref); |
| 244 | |
| 245 | return 0; |
| 246 | } |
| 247 | |
| 248 | static const struct of_device_id dpot_dac_match[] = { |
| 249 | { .compatible = "dpot-dac" }, |
| 250 | { /* sentinel */ } |
| 251 | }; |
| 252 | MODULE_DEVICE_TABLE(of, dpot_dac_match); |
| 253 | |
| 254 | static struct platform_driver dpot_dac_driver = { |
| 255 | .probe = dpot_dac_probe, |
| 256 | .remove = dpot_dac_remove, |
| 257 | .driver = { |
| 258 | .name = "iio-dpot-dac", |
| 259 | .of_match_table = dpot_dac_match, |
| 260 | }, |
| 261 | }; |
| 262 | module_platform_driver(dpot_dac_driver); |
| 263 | |
| 264 | MODULE_DESCRIPTION("DAC emulation driver using a digital potentiometer"); |
| 265 | MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); |
| 266 | MODULE_LICENSE("GPL v2"); |