| Javier Martinez Canillas | 947fd0a | 2012-12-19 14:33:08 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * Device Tree Source for IGEP Technology devices |
| 3 | * |
| 4 | * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> |
| 5 | * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | /dts-v1/; |
| 12 | |
| 13 | /include/ "omap3.dtsi" |
| 14 | |
| 15 | / { |
| 16 | memory { |
| 17 | device_type = "memory"; |
| 18 | reg = <0x80000000 0x20000000>; /* 512 MB */ |
| 19 | }; |
| 20 | |
| 21 | sound { |
| 22 | compatible = "ti,omap-twl4030"; |
| 23 | ti,model = "igep2"; |
| 24 | ti,mcbsp = <&mcbsp2>; |
| 25 | ti,codec = <&twl_audio>; |
| 26 | }; |
| 27 | }; |
| 28 | |
| 29 | &omap3_pmx_core { |
| 30 | uart3_pins: pinmux_uart3_pins { |
| 31 | pinctrl-single,pins = < |
| 32 | 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ |
| 33 | 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */ |
| 34 | >; |
| 35 | }; |
| 36 | |
| 37 | mmc1_pins: pinmux_mmc1_pins { |
| 38 | pinctrl-single,pins = < |
| 39 | 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */ |
| 40 | 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */ |
| 41 | 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */ |
| 42 | 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */ |
| 43 | 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */ |
| 44 | 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */ |
| 45 | 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */ |
| 46 | 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */ |
| 47 | 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */ |
| 48 | 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */ |
| 49 | >; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | &i2c1 { |
| 54 | clock-frequency = <2600000>; |
| 55 | |
| 56 | twl: twl@48 { |
| 57 | reg = <0x48>; |
| 58 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 59 | interrupt-parent = <&intc>; |
| 60 | |
| 61 | twl_audio: audio { |
| 62 | compatible = "ti,twl4030-audio"; |
| 63 | codec { |
| 64 | }; |
| 65 | }; |
| 66 | }; |
| 67 | }; |
| 68 | |
| 69 | /include/ "twl4030.dtsi" |
| 70 | |
| 71 | &i2c2 { |
| 72 | clock-frequency = <400000>; |
| 73 | }; |
| 74 | |
| 75 | &mmc1 { |
| 76 | pinctrl-names = "default"; |
| 77 | pinctrl-0 = <&mmc1_pins>; |
| 78 | vmmc-supply = <&vmmc1>; |
| 79 | vmmc_aux-supply = <&vsim>; |
| 80 | bus-width = <8>; |
| 81 | }; |
| 82 | |
| 83 | &mmc2 { |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | &mmc3 { |
| 88 | status = "disabled"; |
| 89 | }; |
| 90 | |
| 91 | &uart3 { |
| 92 | pinctrl-names = "default"; |
| 93 | pinctrl-0 = <&uart3_pins>; |
| 94 | }; |
| 95 | |
| 96 | &twl_gpio { |
| 97 | ti,use-leds; |
| 98 | }; |