| Steffen Trumtrar | 5169df8 | 2014-01-10 13:52:59 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2011 Freescale Semiconductor, Inc. |
| 3 | * Copyright 2011 Linaro Ltd. |
| 4 | * |
| 5 | * The code contained herein is licensed under the GNU General Public |
| 6 | * License. You may obtain a copy of the GNU General Public License |
| 7 | * Version 2 or later at the following locations: |
| 8 | * |
| 9 | * http://www.opensource.org/licenses/gpl-license.html |
| 10 | * http://www.gnu.org/copyleft/gpl.html |
| 11 | */ |
| 12 | |
| 13 | /dts-v1/; |
| 14 | |
| 15 | #include "imx53-qsb-common.dtsi" |
| 16 | |
| 17 | / { |
| 18 | model = "Freescale i.MX53 Quick Start-R Board"; |
| 19 | compatible = "fsl,imx53-qsrb", "fsl,imx53"; |
| 20 | }; |
| 21 | |
| 22 | &iomuxc { |
| 23 | i2c1 { |
| 24 | /* open drain */ |
| 25 | pinctrl_i2c1_qsrb: i2c1grp-1 { |
| 26 | fsl,pins = < |
| 27 | MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec |
| 28 | MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec |
| 29 | >; |
| 30 | }; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | &i2c1 { |
| 35 | pinctrl-names = "default"; |
| 36 | pinctrl-0 = <&pinctrl_i2c1_qsrb>; |
| 37 | status = "okay"; |
| 38 | |
| 39 | pmic: mc34708@8 { |
| 40 | compatible = "fsl,mc34708"; |
| 41 | reg = <0x08>; |
| 42 | interrupt-parent = <&gpio5>; |
| 43 | interrupts = <23 0x8>; |
| 44 | regulators { |
| 45 | sw1_reg: sw1a { |
| 46 | regulator-name = "SW1"; |
| 47 | regulator-min-microvolt = <650000>; |
| 48 | regulator-max-microvolt = <1437500>; |
| 49 | regulator-boot-on; |
| 50 | regulator-always-on; |
| 51 | }; |
| 52 | |
| 53 | sw1b_reg: sw1b { |
| 54 | regulator-name = "SW1B"; |
| 55 | regulator-min-microvolt = <650000>; |
| 56 | regulator-max-microvolt = <1437500>; |
| 57 | regulator-boot-on; |
| 58 | regulator-always-on; |
| 59 | }; |
| 60 | |
| 61 | sw2_reg: sw2 { |
| 62 | regulator-name = "SW2"; |
| 63 | regulator-min-microvolt = <650000>; |
| 64 | regulator-max-microvolt = <1437500>; |
| 65 | regulator-boot-on; |
| 66 | regulator-always-on; |
| 67 | }; |
| 68 | |
| 69 | sw3_reg: sw3 { |
| 70 | regulator-name = "SW3"; |
| 71 | regulator-min-microvolt = <650000>; |
| 72 | regulator-max-microvolt = <1425000>; |
| 73 | regulator-boot-on; |
| 74 | }; |
| 75 | |
| 76 | sw4a_reg: sw4a { |
| 77 | regulator-name = "SW4A"; |
| 78 | regulator-min-microvolt = <1200000>; |
| 79 | regulator-max-microvolt = <3300000>; |
| 80 | regulator-boot-on; |
| 81 | regulator-always-on; |
| 82 | }; |
| 83 | |
| 84 | sw4b_reg: sw4b { |
| 85 | regulator-name = "SW4B"; |
| 86 | regulator-min-microvolt = <1200000>; |
| 87 | regulator-max-microvolt = <3300000>; |
| 88 | regulator-boot-on; |
| 89 | regulator-always-on; |
| 90 | }; |
| 91 | |
| 92 | sw5_reg: sw5 { |
| 93 | regulator-name = "SW5"; |
| 94 | regulator-min-microvolt = <1200000>; |
| 95 | regulator-max-microvolt = <1975000>; |
| 96 | regulator-boot-on; |
| 97 | regulator-always-on; |
| 98 | }; |
| 99 | |
| 100 | swbst_reg: swbst { |
| 101 | regulator-name = "SWBST"; |
| 102 | regulator-boot-on; |
| 103 | regulator-always-on; |
| 104 | }; |
| 105 | |
| 106 | vpll_reg: vpll { |
| 107 | regulator-name = "VPLL"; |
| 108 | regulator-min-microvolt = <1200000>; |
| 109 | regulator-max-microvolt = <1800000>; |
| 110 | regulator-boot-on; |
| 111 | }; |
| 112 | |
| 113 | vrefddr_reg: vrefddr { |
| 114 | regulator-name = "VREFDDR"; |
| 115 | regulator-boot-on; |
| 116 | regulator-always-on; |
| 117 | }; |
| 118 | |
| 119 | vusb_reg: vusb { |
| 120 | regulator-name = "VUSB"; |
| 121 | regulator-boot-on; |
| 122 | regulator-always-on; |
| 123 | }; |
| 124 | |
| 125 | vusb2_reg: vusb2 { |
| 126 | regulator-name = "VUSB2"; |
| 127 | regulator-min-microvolt = <2500000>; |
| 128 | regulator-max-microvolt = <3000000>; |
| 129 | regulator-boot-on; |
| 130 | regulator-always-on; |
| 131 | }; |
| 132 | |
| 133 | vdac_reg: vdac { |
| 134 | regulator-name = "VDAC"; |
| 135 | regulator-min-microvolt = <2500000>; |
| 136 | regulator-max-microvolt = <2775000>; |
| 137 | regulator-boot-on; |
| 138 | regulator-always-on; |
| 139 | }; |
| 140 | |
| 141 | vgen1_reg: vgen1 { |
| 142 | regulator-name = "VGEN1"; |
| 143 | regulator-min-microvolt = <1200000>; |
| 144 | regulator-max-microvolt = <1550000>; |
| 145 | regulator-boot-on; |
| 146 | regulator-always-on; |
| 147 | }; |
| 148 | |
| 149 | vgen2_reg: vgen2 { |
| 150 | regulator-name = "VGEN2"; |
| 151 | regulator-min-microvolt = <2500000>; |
| 152 | regulator-max-microvolt = <3300000>; |
| 153 | regulator-boot-on; |
| 154 | regulator-always-on; |
| 155 | }; |
| 156 | }; |
| 157 | }; |
| 158 | }; |