| Tony Lindgren | 687c276 | 2015-05-20 09:23:43 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify |
| 3 | * it under the terms of the GNU General Public License version 2 as |
| 4 | * published by the Free Software Foundation. |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include "omap36xx.dtsi" |
| 10 | #include "logicpd-torpedo-som.dtsi" |
| 11 | #include "omap-gpmc-smsc9221.dtsi" |
| 12 | |
| 13 | / { |
| 14 | model = "LogicPD Zoom DM3730 Torpedo Development Kit"; |
| Tony Lindgren | 57df538 | 2015-10-16 12:23:33 -0700 | [diff] [blame] | 15 | compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; |
| Tony Lindgren | 687c276 | 2015-05-20 09:23:43 -0700 | [diff] [blame] | 16 | |
| 17 | gpio_keys { |
| 18 | compatible = "gpio-keys"; |
| 19 | pinctrl-names = "default"; |
| 20 | pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; |
| 21 | |
| 22 | sysboot2 { |
| 23 | label = "sysboot2"; |
| 24 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ |
| 25 | linux,code = <BTN_0>; |
| 26 | gpio-key,wakeup; |
| 27 | }; |
| 28 | |
| 29 | sysboot5 { |
| 30 | label = "sysboot5"; |
| 31 | gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ |
| 32 | linux,code = <BTN_1>; |
| 33 | gpio-key,wakeup; |
| 34 | }; |
| 35 | |
| 36 | gpio1 { |
| 37 | label = "gpio1"; |
| 38 | gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ |
| 39 | linux,code = <BTN_2>; |
| 40 | gpio-key,wakeup; |
| 41 | }; |
| 42 | |
| 43 | gpio2 { |
| 44 | label = "gpio2"; |
| 45 | gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ |
| 46 | linux,code = <BTN_3>; |
| 47 | gpio-key,wakeup; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | leds { |
| 52 | compatible = "gpio-leds"; |
| 53 | pinctrl-names = "default"; |
| 54 | pinctrl-0 = <&led_pins>; |
| 55 | |
| 56 | led1 { |
| 57 | label = "led1"; |
| 58 | gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ |
| 59 | linux,default-trigger = "cpu0"; |
| 60 | }; |
| 61 | |
| 62 | led2 { |
| 63 | label = "led2"; |
| 64 | gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ |
| 65 | linux,default-trigger = "none"; |
| 66 | }; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | &charger { |
| 71 | ti,bb-uvolt = <3200000>; |
| 72 | ti,bb-uamp = <150>; |
| 73 | }; |
| 74 | |
| 75 | &gpmc { |
| 76 | ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ |
| 77 | |
| 78 | ethernet@gpmc { |
| 79 | pinctrl-names = "default"; |
| 80 | pinctrl-0 = <&lan9221_pins>; |
| 81 | interrupt-parent = <&gpio5>; |
| 82 | interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ |
| 83 | reg = <1 0 0xff>; |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | &mmc1 { |
| 88 | interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; |
| 89 | pinctrl-names = "default"; |
| 90 | pinctrl-0 = <&mmc1_pins &mmc1_cd>; |
| 91 | cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */ |
| 92 | vmmc-supply = <&vmmc1>; |
| 93 | bus-width = <4>; |
| 94 | cap-power-off-card; |
| 95 | }; |
| 96 | |
| 97 | &omap3_pmx_core { |
| 98 | gpio_key_pins: pinmux_gpio_key_pins { |
| 99 | pinctrl-single,pins = < |
| 100 | OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ |
| 101 | OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ |
| 102 | >; |
| 103 | }; |
| 104 | |
| 105 | led_pins: pinmux_led_pins { |
| 106 | pinctrl-single,pins = < |
| 107 | OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ |
| 108 | OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ |
| 109 | >; |
| 110 | }; |
| 111 | |
| 112 | mmc1_pins: pinmux_mmc1_pins { |
| 113 | pinctrl-single,pins = < |
| 114 | OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 115 | OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 116 | OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 117 | OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 118 | OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 119 | OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 120 | >; |
| 121 | }; |
| 122 | }; |
| 123 | |
| 124 | &omap3_pmx_wkup { |
| 125 | gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { |
| 126 | pinctrl-single,pins = < |
| 127 | OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ |
| 128 | OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ |
| 129 | >; |
| 130 | }; |
| 131 | |
| 132 | lan9221_pins: pinmux_lan9221_pins { |
| 133 | pinctrl-single,pins = < |
| 134 | OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ |
| 135 | >; |
| 136 | }; |
| 137 | |
| 138 | mmc1_cd: pinmux_mmc1_cd { |
| 139 | pinctrl-single,pins = < |
| 140 | OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ |
| 141 | >; |
| 142 | }; |
| 143 | }; |
| 144 | |
| 145 | &uart1 { |
| 146 | interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; |
| 147 | }; |
| 148 | |
| 149 | /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ |
| 150 | &usb_otg_hs { |
| 151 | interface-type = <0>; |
| 152 | usb-phy = <&usb2_phy>; |
| 153 | phys = <&usb2_phy>; |
| 154 | phy-names = "usb2-phy"; |
| 155 | mode = <3>; |
| 156 | power = <50>; |
| 157 | }; |