Marek Belisko | 0e87873 | 2014-12-03 22:33:20 +0100 | [diff] [blame] | 1 | /* |
| 2 | * OPA362 analog video amplifier with output/power control |
| 3 | * |
| 4 | * Copyright (C) 2014 Golden Delicious Computers |
| 5 | * Author: H. Nikolaus Schaller <hns@goldelico.com> |
| 6 | * |
| 7 | * based on encoder-tfp410 |
| 8 | * |
| 9 | * Copyright (C) 2013 Texas Instruments |
| 10 | * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify it |
| 13 | * under the terms of the GNU General Public License version 2 as published by |
| 14 | * the Free Software Foundation. |
| 15 | */ |
| 16 | |
| 17 | #include <linux/gpio.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/slab.h> |
| 21 | #include <linux/of_gpio.h> |
| 22 | |
| 23 | #include <video/omapdss.h> |
| 24 | |
| 25 | struct panel_drv_data { |
| 26 | struct omap_dss_device dssdev; |
| 27 | struct omap_dss_device *in; |
| 28 | |
| 29 | struct gpio_desc *enable_gpio; |
| 30 | |
| 31 | struct omap_video_timings timings; |
| 32 | }; |
| 33 | |
| 34 | #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev) |
| 35 | |
| 36 | static int opa362_connect(struct omap_dss_device *dssdev, |
| 37 | struct omap_dss_device *dst) |
| 38 | { |
| 39 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 40 | struct omap_dss_device *in = ddata->in; |
| 41 | int r; |
| 42 | |
| 43 | dev_dbg(dssdev->dev, "connect\n"); |
| 44 | |
| 45 | if (omapdss_device_is_connected(dssdev)) |
| 46 | return -EBUSY; |
| 47 | |
| 48 | r = in->ops.atv->connect(in, dssdev); |
| 49 | if (r) |
| 50 | return r; |
| 51 | |
| 52 | dst->src = dssdev; |
| 53 | dssdev->dst = dst; |
| 54 | |
| 55 | return 0; |
| 56 | } |
| 57 | |
| 58 | static void opa362_disconnect(struct omap_dss_device *dssdev, |
| 59 | struct omap_dss_device *dst) |
| 60 | { |
| 61 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 62 | struct omap_dss_device *in = ddata->in; |
| 63 | |
| 64 | dev_dbg(dssdev->dev, "disconnect\n"); |
| 65 | |
| 66 | WARN_ON(!omapdss_device_is_connected(dssdev)); |
| 67 | if (!omapdss_device_is_connected(dssdev)) |
| 68 | return; |
| 69 | |
| 70 | WARN_ON(dst != dssdev->dst); |
| 71 | if (dst != dssdev->dst) |
| 72 | return; |
| 73 | |
| 74 | dst->src = NULL; |
| 75 | dssdev->dst = NULL; |
| 76 | |
| 77 | in->ops.atv->disconnect(in, &ddata->dssdev); |
| 78 | } |
| 79 | |
| 80 | static int opa362_enable(struct omap_dss_device *dssdev) |
| 81 | { |
| 82 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 83 | struct omap_dss_device *in = ddata->in; |
| 84 | int r; |
| 85 | |
| 86 | dev_dbg(dssdev->dev, "enable\n"); |
| 87 | |
| 88 | if (!omapdss_device_is_connected(dssdev)) |
| 89 | return -ENODEV; |
| 90 | |
| 91 | if (omapdss_device_is_enabled(dssdev)) |
| 92 | return 0; |
| 93 | |
| 94 | in->ops.atv->set_timings(in, &ddata->timings); |
| 95 | |
| 96 | r = in->ops.atv->enable(in); |
| 97 | if (r) |
| 98 | return r; |
| 99 | |
| 100 | if (ddata->enable_gpio) |
| 101 | gpiod_set_value_cansleep(ddata->enable_gpio, 1); |
| 102 | |
| 103 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| 104 | |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static void opa362_disable(struct omap_dss_device *dssdev) |
| 109 | { |
| 110 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 111 | struct omap_dss_device *in = ddata->in; |
| 112 | |
| 113 | dev_dbg(dssdev->dev, "disable\n"); |
| 114 | |
| 115 | if (!omapdss_device_is_enabled(dssdev)) |
| 116 | return; |
| 117 | |
| 118 | if (ddata->enable_gpio) |
| 119 | gpiod_set_value_cansleep(ddata->enable_gpio, 0); |
| 120 | |
| 121 | in->ops.atv->disable(in); |
| 122 | |
| 123 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| 124 | } |
| 125 | |
| 126 | static void opa362_set_timings(struct omap_dss_device *dssdev, |
| 127 | struct omap_video_timings *timings) |
| 128 | { |
| 129 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 130 | struct omap_dss_device *in = ddata->in; |
| 131 | |
| 132 | dev_dbg(dssdev->dev, "set_timings\n"); |
| 133 | |
| 134 | ddata->timings = *timings; |
| 135 | dssdev->panel.timings = *timings; |
| 136 | |
| 137 | in->ops.atv->set_timings(in, timings); |
| 138 | } |
| 139 | |
| 140 | static void opa362_get_timings(struct omap_dss_device *dssdev, |
| 141 | struct omap_video_timings *timings) |
| 142 | { |
| 143 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 144 | |
| 145 | dev_dbg(dssdev->dev, "get_timings\n"); |
| 146 | |
| 147 | *timings = ddata->timings; |
| 148 | } |
| 149 | |
| 150 | static int opa362_check_timings(struct omap_dss_device *dssdev, |
| 151 | struct omap_video_timings *timings) |
| 152 | { |
| 153 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 154 | struct omap_dss_device *in = ddata->in; |
| 155 | |
| 156 | dev_dbg(dssdev->dev, "check_timings\n"); |
| 157 | |
| 158 | return in->ops.atv->check_timings(in, timings); |
| 159 | } |
| 160 | |
| 161 | static void opa362_set_type(struct omap_dss_device *dssdev, |
| 162 | enum omap_dss_venc_type type) |
| 163 | { |
| 164 | /* we can only drive a COMPOSITE output */ |
| 165 | WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE); |
| 166 | |
| 167 | } |
| 168 | |
| 169 | static const struct omapdss_atv_ops opa362_atv_ops = { |
| 170 | .connect = opa362_connect, |
| 171 | .disconnect = opa362_disconnect, |
| 172 | |
| 173 | .enable = opa362_enable, |
| 174 | .disable = opa362_disable, |
| 175 | |
| 176 | .check_timings = opa362_check_timings, |
| 177 | .set_timings = opa362_set_timings, |
| 178 | .get_timings = opa362_get_timings, |
| 179 | |
| 180 | .set_type = opa362_set_type, |
| 181 | }; |
| 182 | |
| 183 | static int opa362_probe(struct platform_device *pdev) |
| 184 | { |
| 185 | struct device_node *node = pdev->dev.of_node; |
| 186 | struct panel_drv_data *ddata; |
| 187 | struct omap_dss_device *dssdev, *in; |
| 188 | struct gpio_desc *gpio; |
| 189 | int r; |
| 190 | |
| 191 | dev_dbg(&pdev->dev, "probe\n"); |
| 192 | |
| 193 | if (node == NULL) { |
| 194 | dev_err(&pdev->dev, "Unable to find device tree\n"); |
| 195 | return -EINVAL; |
| 196 | } |
| 197 | |
| 198 | ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| 199 | if (!ddata) |
| 200 | return -ENOMEM; |
| 201 | |
| 202 | platform_set_drvdata(pdev, ddata); |
| 203 | |
Uwe Kleine-König | ca8c67d | 2015-05-28 10:05:15 +0200 | [diff] [blame^] | 204 | gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW); |
| 205 | if (IS_ERR(gpio)) |
| 206 | return PTR_ERR(gpio); |
Marek Belisko | 0e87873 | 2014-12-03 22:33:20 +0100 | [diff] [blame] | 207 | |
| 208 | ddata->enable_gpio = gpio; |
| 209 | |
| 210 | in = omapdss_of_find_source_for_first_ep(node); |
| 211 | if (IS_ERR(in)) { |
| 212 | dev_err(&pdev->dev, "failed to find video source\n"); |
| 213 | return PTR_ERR(in); |
| 214 | } |
| 215 | |
| 216 | ddata->in = in; |
| 217 | |
| 218 | dssdev = &ddata->dssdev; |
| 219 | dssdev->ops.atv = &opa362_atv_ops; |
| 220 | dssdev->dev = &pdev->dev; |
| 221 | dssdev->type = OMAP_DISPLAY_TYPE_VENC; |
| 222 | dssdev->output_type = OMAP_DISPLAY_TYPE_VENC; |
| 223 | dssdev->owner = THIS_MODULE; |
| 224 | |
| 225 | r = omapdss_register_output(dssdev); |
| 226 | if (r) { |
| 227 | dev_err(&pdev->dev, "Failed to register output\n"); |
| 228 | goto err_reg; |
| 229 | } |
| 230 | |
| 231 | return 0; |
| 232 | err_reg: |
| 233 | omap_dss_put_device(ddata->in); |
| 234 | return r; |
| 235 | } |
| 236 | |
| 237 | static int __exit opa362_remove(struct platform_device *pdev) |
| 238 | { |
| 239 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 240 | struct omap_dss_device *dssdev = &ddata->dssdev; |
| 241 | struct omap_dss_device *in = ddata->in; |
| 242 | |
| 243 | omapdss_unregister_output(&ddata->dssdev); |
| 244 | |
| 245 | WARN_ON(omapdss_device_is_enabled(dssdev)); |
| 246 | if (omapdss_device_is_enabled(dssdev)) |
| 247 | opa362_disable(dssdev); |
| 248 | |
| 249 | WARN_ON(omapdss_device_is_connected(dssdev)); |
| 250 | if (omapdss_device_is_connected(dssdev)) |
| 251 | opa362_disconnect(dssdev, dssdev->dst); |
| 252 | |
| 253 | omap_dss_put_device(in); |
| 254 | |
| 255 | return 0; |
| 256 | } |
| 257 | |
| 258 | static const struct of_device_id opa362_of_match[] = { |
| 259 | { .compatible = "omapdss,ti,opa362", }, |
| 260 | {}, |
| 261 | }; |
| 262 | MODULE_DEVICE_TABLE(of, opa362_of_match); |
| 263 | |
| 264 | static struct platform_driver opa362_driver = { |
| 265 | .probe = opa362_probe, |
| 266 | .remove = __exit_p(opa362_remove), |
| 267 | .driver = { |
| 268 | .name = "amplifier-opa362", |
| 269 | .owner = THIS_MODULE, |
| 270 | .of_match_table = opa362_of_match, |
| 271 | .suppress_bind_attrs = true, |
| 272 | }, |
| 273 | }; |
| 274 | |
| 275 | module_platform_driver(opa362_driver); |
| 276 | |
| 277 | MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); |
| 278 | MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control"); |
| 279 | MODULE_LICENSE("GPL v2"); |