Herbert Valerio Riedel | 7e56a7d | 2006-07-14 00:24:11 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Intersil ISL1208 rtc class driver |
| 3 | * |
| 4 | * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License as published by the |
| 8 | * Free Software Foundation; either version 2 of the License, or (at your |
| 9 | * option) any later version. |
| 10 | * |
| 11 | */ |
| 12 | |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/bcd.h> |
| 16 | #include <linux/rtc.h> |
| 17 | |
| 18 | #define DRV_NAME "isl1208" |
| 19 | #define DRV_VERSION "0.2" |
| 20 | |
| 21 | /* Register map */ |
| 22 | /* rtc section */ |
| 23 | #define ISL1208_REG_SC 0x00 |
| 24 | #define ISL1208_REG_MN 0x01 |
| 25 | #define ISL1208_REG_HR 0x02 |
| 26 | #define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */ |
| 27 | #define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */ |
| 28 | #define ISL1208_REG_DT 0x03 |
| 29 | #define ISL1208_REG_MO 0x04 |
| 30 | #define ISL1208_REG_YR 0x05 |
| 31 | #define ISL1208_REG_DW 0x06 |
| 32 | #define ISL1208_RTC_SECTION_LEN 7 |
| 33 | |
| 34 | /* control/status section */ |
| 35 | #define ISL1208_REG_SR 0x07 |
| 36 | #define ISL1208_REG_SR_ARST (1<<7) /* auto reset */ |
| 37 | #define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */ |
| 38 | #define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */ |
| 39 | #define ISL1208_REG_SR_ALM (1<<2) /* alarm */ |
| 40 | #define ISL1208_REG_SR_BAT (1<<1) /* battery */ |
| 41 | #define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */ |
| 42 | #define ISL1208_REG_INT 0x08 |
| 43 | #define ISL1208_REG_09 0x09 /* reserved */ |
| 44 | #define ISL1208_REG_ATR 0x0a |
| 45 | #define ISL1208_REG_DTR 0x0b |
| 46 | |
| 47 | /* alarm section */ |
| 48 | #define ISL1208_REG_SCA 0x0c |
| 49 | #define ISL1208_REG_MNA 0x0d |
| 50 | #define ISL1208_REG_HRA 0x0e |
| 51 | #define ISL1208_REG_DTA 0x0f |
| 52 | #define ISL1208_REG_MOA 0x10 |
| 53 | #define ISL1208_REG_DWA 0x11 |
| 54 | #define ISL1208_ALARM_SECTION_LEN 6 |
| 55 | |
| 56 | /* user section */ |
| 57 | #define ISL1208_REG_USR1 0x12 |
| 58 | #define ISL1208_REG_USR2 0x13 |
| 59 | #define ISL1208_USR_SECTION_LEN 2 |
| 60 | |
| 61 | /* i2c configuration */ |
| 62 | #define ISL1208_I2C_ADDR 0xde |
| 63 | |
| 64 | static unsigned short normal_i2c[] = { |
| 65 | ISL1208_I2C_ADDR>>1, I2C_CLIENT_END |
| 66 | }; |
| 67 | I2C_CLIENT_INSMOD; /* defines addr_data */ |
| 68 | |
| 69 | static int isl1208_attach_adapter(struct i2c_adapter *adapter); |
| 70 | static int isl1208_detach_client(struct i2c_client *client); |
| 71 | |
| 72 | static struct i2c_driver isl1208_driver = { |
| 73 | .driver = { |
| 74 | .name = DRV_NAME, |
| 75 | }, |
| 76 | .id = I2C_DRIVERID_ISL1208, |
| 77 | .attach_adapter = &isl1208_attach_adapter, |
| 78 | .detach_client = &isl1208_detach_client, |
| 79 | }; |
| 80 | |
| 81 | /* block read */ |
| 82 | static int |
| 83 | isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[], |
| 84 | unsigned len) |
| 85 | { |
| 86 | u8 reg_addr[1] = { reg }; |
| 87 | struct i2c_msg msgs[2] = { |
| 88 | { client->addr, client->flags, sizeof(reg_addr), reg_addr }, |
| 89 | { client->addr, client->flags | I2C_M_RD, len, buf } |
| 90 | }; |
| 91 | int ret; |
| 92 | |
| 93 | BUG_ON(len == 0); |
| 94 | BUG_ON(reg > ISL1208_REG_USR2); |
| 95 | BUG_ON(reg + len > ISL1208_REG_USR2 + 1); |
| 96 | |
| 97 | ret = i2c_transfer(client->adapter, msgs, 2); |
| 98 | if (ret > 0) |
| 99 | ret = 0; |
| 100 | return ret; |
| 101 | } |
| 102 | |
| 103 | /* block write */ |
| 104 | static int |
| 105 | isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[], |
| 106 | unsigned len) |
| 107 | { |
| 108 | u8 i2c_buf[ISL1208_REG_USR2 + 2]; |
| 109 | struct i2c_msg msgs[1] = { |
| 110 | { client->addr, client->flags, len + 1, i2c_buf } |
| 111 | }; |
| 112 | int ret; |
| 113 | |
| 114 | BUG_ON(len == 0); |
| 115 | BUG_ON(reg > ISL1208_REG_USR2); |
| 116 | BUG_ON(reg + len > ISL1208_REG_USR2 + 1); |
| 117 | |
| 118 | i2c_buf[0] = reg; |
| 119 | memcpy(&i2c_buf[1], &buf[0], len); |
| 120 | |
| 121 | ret = i2c_transfer(client->adapter, msgs, 1); |
| 122 | if (ret > 0) |
| 123 | ret = 0; |
| 124 | return ret; |
| 125 | } |
| 126 | |
| 127 | /* simple check to see wether we have a isl1208 */ |
| 128 | static int isl1208_i2c_validate_client(struct i2c_client *client) |
| 129 | { |
| 130 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; |
| 131 | u8 zero_mask[ISL1208_RTC_SECTION_LEN] = { |
| 132 | 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8 |
| 133 | }; |
| 134 | int i; |
| 135 | int ret; |
| 136 | |
| 137 | ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); |
| 138 | if (ret < 0) |
| 139 | return ret; |
| 140 | |
| 141 | for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) { |
| 142 | if (regs[i] & zero_mask[i]) /* check if bits are cleared */ |
| 143 | return -ENODEV; |
| 144 | } |
| 145 | |
| 146 | return 0; |
| 147 | } |
| 148 | |
| 149 | static int isl1208_i2c_get_sr(struct i2c_client *client) |
| 150 | { |
| 151 | return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0; |
| 152 | } |
| 153 | |
| 154 | static int isl1208_i2c_get_atr(struct i2c_client *client) |
| 155 | { |
| 156 | int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR); |
| 157 | |
| 158 | if (atr < 0) |
| 159 | return -EIO; |
| 160 | |
| 161 | /* The 6bit value in the ATR register controls the load |
| 162 | * capacitance C_load * in steps of 0.25pF |
| 163 | * |
| 164 | * bit (1<<5) of the ATR register is inverted |
| 165 | * |
| 166 | * C_load(ATR=0x20) = 4.50pF |
| 167 | * C_load(ATR=0x00) = 12.50pF |
| 168 | * C_load(ATR=0x1f) = 20.25pF |
| 169 | * |
| 170 | */ |
| 171 | |
| 172 | atr &= 0x3f; /* mask out lsb */ |
| 173 | atr ^= 1<<5; /* invert 6th bit */ |
| 174 | atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */ |
| 175 | |
| 176 | return atr; |
| 177 | } |
| 178 | |
| 179 | static int isl1208_i2c_get_dtr(struct i2c_client *client) |
| 180 | { |
| 181 | int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR); |
| 182 | |
| 183 | if (dtr < 0) |
| 184 | return -EIO; |
| 185 | |
| 186 | /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */ |
| 187 | dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1); |
| 188 | |
| 189 | return dtr; |
| 190 | } |
| 191 | |
| 192 | static int isl1208_i2c_get_usr(struct i2c_client *client) |
| 193 | { |
| 194 | u8 buf[ISL1208_USR_SECTION_LEN] = { 0, }; |
| 195 | int ret; |
| 196 | |
| 197 | ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf, |
| 198 | ISL1208_USR_SECTION_LEN); |
| 199 | if (ret < 0) |
| 200 | return ret; |
| 201 | |
| 202 | return (buf[1] << 8) | buf[0]; |
| 203 | } |
| 204 | |
| 205 | static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr) |
| 206 | { |
| 207 | u8 buf[ISL1208_USR_SECTION_LEN]; |
| 208 | |
| 209 | buf[0] = usr & 0xff; |
| 210 | buf[1] = (usr >> 8) & 0xff; |
| 211 | |
| 212 | return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf, |
| 213 | ISL1208_USR_SECTION_LEN); |
| 214 | } |
| 215 | |
| 216 | static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq) |
| 217 | { |
| 218 | struct i2c_client *const client = to_i2c_client(dev); |
| 219 | int sr, dtr, atr, usr; |
| 220 | |
| 221 | sr = isl1208_i2c_get_sr(client); |
| 222 | if (sr < 0) { |
| 223 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); |
| 224 | return sr; |
| 225 | } |
| 226 | |
| 227 | seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n", |
| 228 | (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "", |
| 229 | (sr & ISL1208_REG_SR_BAT) ? " BAT" : "", |
| 230 | (sr & ISL1208_REG_SR_ALM) ? " ALM" : "", |
| 231 | (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "", |
| 232 | (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "", |
| 233 | (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", |
| 234 | sr); |
| 235 | |
| 236 | seq_printf(seq, "batt_status\t: %s\n", |
| 237 | (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay"); |
| 238 | |
| 239 | dtr = isl1208_i2c_get_dtr(client); |
| 240 | if (dtr >= 0 -1) |
| 241 | seq_printf(seq, "digital_trim\t: %d ppm\n", dtr); |
| 242 | |
| 243 | atr = isl1208_i2c_get_atr(client); |
| 244 | if (atr >= 0) |
| 245 | seq_printf(seq, "analog_trim\t: %d.%.2d pF\n", |
| 246 | atr>>2, (atr&0x3)*25); |
| 247 | |
| 248 | usr = isl1208_i2c_get_usr(client); |
| 249 | if (usr >= 0) |
| 250 | seq_printf(seq, "user_data\t: 0x%.4x\n", usr); |
| 251 | |
| 252 | return 0; |
| 253 | } |
| 254 | |
| 255 | |
| 256 | static int isl1208_i2c_read_time(struct i2c_client *client, |
| 257 | struct rtc_time *tm) |
| 258 | { |
| 259 | int sr; |
| 260 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; |
| 261 | |
| 262 | sr = isl1208_i2c_get_sr(client); |
| 263 | if (sr < 0) { |
| 264 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); |
| 265 | return -EIO; |
| 266 | } |
| 267 | |
| 268 | sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); |
| 269 | if (sr < 0) { |
| 270 | dev_err(&client->dev, "%s: reading RTC section failed\n", |
| 271 | __func__); |
| 272 | return sr; |
| 273 | } |
| 274 | |
| 275 | tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]); |
| 276 | tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]); |
| 277 | { /* HR field has a more complex interpretation */ |
| 278 | const u8 _hr = regs[ISL1208_REG_HR]; |
| 279 | if (_hr & ISL1208_REG_HR_MIL) /* 24h format */ |
| 280 | tm->tm_hour = BCD2BIN(_hr & 0x3f); |
| 281 | else { // 12h format |
| 282 | tm->tm_hour = BCD2BIN(_hr & 0x1f); |
| 283 | if (_hr & ISL1208_REG_HR_PM) /* PM flag set */ |
| 284 | tm->tm_hour += 12; |
| 285 | } |
| 286 | } |
| 287 | |
| 288 | tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]); |
| 289 | tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */ |
| 290 | tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100; |
| 291 | tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]); |
| 292 | |
| 293 | return 0; |
| 294 | } |
| 295 | |
| 296 | static int isl1208_i2c_read_alarm(struct i2c_client *client, |
| 297 | struct rtc_wkalrm *alarm) |
| 298 | { |
| 299 | struct rtc_time *const tm = &alarm->time; |
| 300 | u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, }; |
| 301 | int sr; |
| 302 | |
| 303 | sr = isl1208_i2c_get_sr(client); |
| 304 | if (sr < 0) { |
| 305 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); |
| 306 | return sr; |
| 307 | } |
| 308 | |
| 309 | sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs, |
| 310 | ISL1208_ALARM_SECTION_LEN); |
| 311 | if (sr < 0) { |
| 312 | dev_err(&client->dev, "%s: reading alarm section failed\n", |
| 313 | __func__); |
| 314 | return sr; |
| 315 | } |
| 316 | |
| 317 | /* MSB of each alarm register is an enable bit */ |
| 318 | tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f); |
| 319 | tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f); |
| 320 | tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f); |
| 321 | tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f); |
| 322 | tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1; |
| 323 | tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03); |
| 324 | |
| 325 | return 0; |
| 326 | } |
| 327 | |
| 328 | static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 329 | { |
| 330 | return isl1208_i2c_read_time(to_i2c_client(dev), tm); |
| 331 | } |
| 332 | |
| 333 | static int isl1208_i2c_set_time(struct i2c_client *client, |
| 334 | struct rtc_time const *tm) |
| 335 | { |
| 336 | int sr; |
| 337 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; |
| 338 | |
| 339 | regs[ISL1208_REG_SC] = BIN2BCD(tm->tm_sec); |
| 340 | regs[ISL1208_REG_MN] = BIN2BCD(tm->tm_min); |
| 341 | regs[ISL1208_REG_HR] = BIN2BCD(tm->tm_hour) | ISL1208_REG_HR_MIL; |
| 342 | |
| 343 | regs[ISL1208_REG_DT] = BIN2BCD(tm->tm_mday); |
| 344 | regs[ISL1208_REG_MO] = BIN2BCD(tm->tm_mon + 1); |
| 345 | regs[ISL1208_REG_YR] = BIN2BCD(tm->tm_year - 100); |
| 346 | |
| 347 | regs[ISL1208_REG_DW] = BIN2BCD(tm->tm_wday & 7); |
| 348 | |
| 349 | sr = isl1208_i2c_get_sr(client); |
| 350 | if (sr < 0) { |
| 351 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); |
| 352 | return sr; |
| 353 | } |
| 354 | |
| 355 | /* set WRTC */ |
| 356 | sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR, |
| 357 | sr | ISL1208_REG_SR_WRTC); |
| 358 | if (sr < 0) { |
| 359 | dev_err(&client->dev, "%s: writing SR failed\n", __func__); |
| 360 | return sr; |
| 361 | } |
| 362 | |
| 363 | /* write RTC registers */ |
| 364 | sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); |
| 365 | if (sr < 0) { |
| 366 | dev_err(&client->dev, "%s: writing RTC section failed\n", |
| 367 | __func__); |
| 368 | return sr; |
| 369 | } |
| 370 | |
| 371 | /* clear WRTC again */ |
| 372 | sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR, |
| 373 | sr & ~ISL1208_REG_SR_WRTC); |
| 374 | if (sr < 0) { |
| 375 | dev_err(&client->dev, "%s: writing SR failed\n", __func__); |
| 376 | return sr; |
| 377 | } |
| 378 | |
| 379 | return 0; |
| 380 | } |
| 381 | |
| 382 | |
| 383 | static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 384 | { |
| 385 | return isl1208_i2c_set_time(to_i2c_client(dev), tm); |
| 386 | } |
| 387 | |
| 388 | static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| 389 | { |
| 390 | return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm); |
| 391 | } |
| 392 | |
David Brownell | ff8371a | 2006-09-30 23:28:17 -0700 | [diff] [blame] | 393 | static const struct rtc_class_ops isl1208_rtc_ops = { |
Herbert Valerio Riedel | 7e56a7d | 2006-07-14 00:24:11 -0700 | [diff] [blame] | 394 | .proc = isl1208_rtc_proc, |
| 395 | .read_time = isl1208_rtc_read_time, |
| 396 | .set_time = isl1208_rtc_set_time, |
| 397 | .read_alarm = isl1208_rtc_read_alarm, |
| 398 | //.set_alarm = isl1208_rtc_set_alarm, |
| 399 | }; |
| 400 | |
| 401 | /* sysfs interface */ |
| 402 | |
| 403 | static ssize_t isl1208_sysfs_show_atrim(struct device *dev, |
| 404 | struct device_attribute *attr, |
| 405 | char *buf) |
| 406 | { |
| 407 | int atr; |
| 408 | |
| 409 | atr = isl1208_i2c_get_atr(to_i2c_client(dev)); |
| 410 | if (atr < 0) |
| 411 | return atr; |
| 412 | |
| 413 | return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25); |
| 414 | } |
| 415 | static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL); |
| 416 | |
| 417 | static ssize_t isl1208_sysfs_show_dtrim(struct device *dev, |
| 418 | struct device_attribute *attr, |
| 419 | char *buf) |
| 420 | { |
| 421 | int dtr; |
| 422 | |
| 423 | dtr = isl1208_i2c_get_dtr(to_i2c_client(dev)); |
| 424 | if (dtr < 0) |
| 425 | return dtr; |
| 426 | |
| 427 | return sprintf(buf, "%d ppm\n", dtr); |
| 428 | } |
| 429 | static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL); |
| 430 | |
| 431 | static ssize_t isl1208_sysfs_show_usr(struct device *dev, |
| 432 | struct device_attribute *attr, |
| 433 | char *buf) |
| 434 | { |
| 435 | int usr; |
| 436 | |
| 437 | usr = isl1208_i2c_get_usr(to_i2c_client(dev)); |
| 438 | if (usr < 0) |
| 439 | return usr; |
| 440 | |
| 441 | return sprintf(buf, "0x%.4x\n", usr); |
| 442 | } |
| 443 | |
| 444 | static ssize_t isl1208_sysfs_store_usr(struct device *dev, |
| 445 | struct device_attribute *attr, |
| 446 | const char *buf, size_t count) |
| 447 | { |
| 448 | int usr = -1; |
| 449 | |
| 450 | if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) { |
| 451 | if (sscanf(buf, "%x", &usr) != 1) |
| 452 | return -EINVAL; |
| 453 | } else { |
| 454 | if (sscanf(buf, "%d", &usr) != 1) |
| 455 | return -EINVAL; |
| 456 | } |
| 457 | |
| 458 | if (usr < 0 || usr > 0xffff) |
| 459 | return -EINVAL; |
| 460 | |
| 461 | return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count; |
| 462 | } |
| 463 | static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr, |
| 464 | isl1208_sysfs_store_usr); |
| 465 | |
| 466 | static int |
| 467 | isl1208_probe(struct i2c_adapter *adapter, int addr, int kind) |
| 468 | { |
| 469 | int rc = 0; |
| 470 | struct i2c_client *new_client = NULL; |
| 471 | struct rtc_device *rtc = NULL; |
| 472 | |
| 473 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { |
| 474 | rc = -ENODEV; |
| 475 | goto failout; |
| 476 | } |
| 477 | |
| 478 | new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); |
| 479 | if (new_client == NULL) { |
| 480 | rc = -ENOMEM; |
| 481 | goto failout; |
| 482 | } |
| 483 | |
| 484 | new_client->addr = addr; |
| 485 | new_client->adapter = adapter; |
| 486 | new_client->driver = &isl1208_driver; |
| 487 | new_client->flags = 0; |
| 488 | strcpy(new_client->name, DRV_NAME); |
| 489 | |
| 490 | if (kind < 0) { |
| 491 | rc = isl1208_i2c_validate_client(new_client); |
| 492 | if (rc < 0) |
| 493 | goto failout; |
| 494 | } |
| 495 | |
| 496 | rc = i2c_attach_client(new_client); |
| 497 | if (rc < 0) |
| 498 | goto failout; |
| 499 | |
| 500 | dev_info(&new_client->dev, |
| 501 | "chip found, driver version " DRV_VERSION "\n"); |
| 502 | |
| 503 | rtc = rtc_device_register(isl1208_driver.driver.name, |
| 504 | &new_client->dev, |
| 505 | &isl1208_rtc_ops, THIS_MODULE); |
| 506 | |
| 507 | if (IS_ERR(rtc)) { |
| 508 | rc = PTR_ERR(rtc); |
| 509 | goto failout_detach; |
| 510 | } |
| 511 | |
| 512 | i2c_set_clientdata(new_client, rtc); |
| 513 | |
| 514 | rc = isl1208_i2c_get_sr(new_client); |
| 515 | if (rc < 0) { |
| 516 | dev_err(&new_client->dev, "reading status failed\n"); |
| 517 | goto failout_unregister; |
| 518 | } |
| 519 | |
| 520 | if (rc & ISL1208_REG_SR_RTCF) |
| 521 | dev_warn(&new_client->dev, "rtc power failure detected, " |
| 522 | "please set clock.\n"); |
| 523 | |
| 524 | rc = device_create_file(&new_client->dev, &dev_attr_atrim); |
| 525 | if (rc < 0) |
| 526 | goto failout_unregister; |
| 527 | rc = device_create_file(&new_client->dev, &dev_attr_dtrim); |
| 528 | if (rc < 0) |
| 529 | goto failout_atrim; |
| 530 | rc = device_create_file(&new_client->dev, &dev_attr_usr); |
| 531 | if (rc < 0) |
| 532 | goto failout_dtrim; |
| 533 | |
| 534 | return 0; |
| 535 | |
| 536 | failout_dtrim: |
| 537 | device_remove_file(&new_client->dev, &dev_attr_dtrim); |
| 538 | failout_atrim: |
| 539 | device_remove_file(&new_client->dev, &dev_attr_atrim); |
| 540 | failout_unregister: |
| 541 | rtc_device_unregister(rtc); |
| 542 | failout_detach: |
| 543 | i2c_detach_client(new_client); |
| 544 | failout: |
| 545 | kfree(new_client); |
| 546 | return rc; |
| 547 | } |
| 548 | |
| 549 | static int |
| 550 | isl1208_attach_adapter (struct i2c_adapter *adapter) |
| 551 | { |
| 552 | return i2c_probe(adapter, &addr_data, isl1208_probe); |
| 553 | } |
| 554 | |
| 555 | static int |
| 556 | isl1208_detach_client(struct i2c_client *client) |
| 557 | { |
| 558 | int rc; |
| 559 | struct rtc_device *const rtc = i2c_get_clientdata(client); |
| 560 | |
| 561 | if (rtc) |
| 562 | rtc_device_unregister(rtc); /* do we need to kfree? */ |
| 563 | |
| 564 | rc = i2c_detach_client(client); |
| 565 | if (rc) |
| 566 | return rc; |
| 567 | |
| 568 | kfree(client); |
| 569 | |
| 570 | return 0; |
| 571 | } |
| 572 | |
| 573 | /* module management */ |
| 574 | |
| 575 | static int __init isl1208_init(void) |
| 576 | { |
| 577 | return i2c_add_driver(&isl1208_driver); |
| 578 | } |
| 579 | |
| 580 | static void __exit isl1208_exit(void) |
| 581 | { |
| 582 | i2c_del_driver(&isl1208_driver); |
| 583 | } |
| 584 | |
| 585 | MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>"); |
| 586 | MODULE_DESCRIPTION("Intersil ISL1208 RTC driver"); |
| 587 | MODULE_LICENSE("GPL"); |
| 588 | MODULE_VERSION(DRV_VERSION); |
| 589 | |
| 590 | module_init(isl1208_init); |
| 591 | module_exit(isl1208_exit); |