| Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| Phil Reid | ac2bec9 | 2017-01-16 16:38:24 +0800 | [diff] [blame] | 2 | /* |
| 3 | * TI tlc4541 ADC Driver |
| 4 | * |
| 5 | * Copyright (C) 2017 Phil Reid |
| 6 | * |
| 7 | * Datasheets can be found here: |
| 8 | * http://www.ti.com/lit/gpn/tlc3541 |
| 9 | * http://www.ti.com/lit/gpn/tlc4541 |
| 10 | * |
| Phil Reid | ac2bec9 | 2017-01-16 16:38:24 +0800 | [diff] [blame] | 11 | * The tlc4541 requires 24 clock cycles to start a transfer. |
| 12 | * Conversion then takes 2.94us to complete before data is ready |
| 13 | * Data is returned MSB first. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/device.h> |
| 18 | #include <linux/err.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/iio/iio.h> |
| 21 | #include <linux/iio/sysfs.h> |
| 22 | #include <linux/iio/buffer.h> |
| 23 | #include <linux/iio/trigger_consumer.h> |
| 24 | #include <linux/iio/triggered_buffer.h> |
| 25 | #include <linux/kernel.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/regulator/consumer.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/spi/spi.h> |
| 30 | #include <linux/sysfs.h> |
| 31 | |
| 32 | struct tlc4541_state { |
| 33 | struct spi_device *spi; |
| 34 | struct regulator *reg; |
| 35 | struct spi_transfer scan_single_xfer[3]; |
| 36 | struct spi_message scan_single_msg; |
| 37 | |
| 38 | /* |
| 39 | * DMA (thus cache coherency maintenance) requires the |
| 40 | * transfer buffers to live in their own cache lines. |
| 41 | * 2 bytes data + 6 bytes padding + 8 bytes timestamp when |
| 42 | * call iio_push_to_buffers_with_timestamp. |
| 43 | */ |
| 44 | __be16 rx_buf[8] ____cacheline_aligned; |
| 45 | }; |
| 46 | |
| 47 | struct tlc4541_chip_info { |
| 48 | const struct iio_chan_spec *channels; |
| 49 | unsigned int num_channels; |
| 50 | }; |
| 51 | |
| 52 | enum tlc4541_id { |
| 53 | TLC3541, |
| 54 | TLC4541, |
| 55 | }; |
| 56 | |
| 57 | #define TLC4541_V_CHAN(bits, bitshift) { \ |
| 58 | .type = IIO_VOLTAGE, \ |
| 59 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 60 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| 61 | .scan_type = { \ |
| 62 | .sign = 'u', \ |
| 63 | .realbits = (bits), \ |
| 64 | .storagebits = 16, \ |
| 65 | .shift = (bitshift), \ |
| 66 | .endianness = IIO_BE, \ |
| 67 | }, \ |
| 68 | } |
| 69 | |
| 70 | #define DECLARE_TLC4541_CHANNELS(name, bits, bitshift) \ |
| 71 | const struct iio_chan_spec name ## _channels[] = { \ |
| 72 | TLC4541_V_CHAN(bits, bitshift), \ |
| 73 | IIO_CHAN_SOFT_TIMESTAMP(1), \ |
| 74 | } |
| 75 | |
| 76 | static DECLARE_TLC4541_CHANNELS(tlc3541, 14, 2); |
| 77 | static DECLARE_TLC4541_CHANNELS(tlc4541, 16, 0); |
| 78 | |
| 79 | static const struct tlc4541_chip_info tlc4541_chip_info[] = { |
| 80 | [TLC3541] = { |
| 81 | .channels = tlc3541_channels, |
| 82 | .num_channels = ARRAY_SIZE(tlc3541_channels), |
| 83 | }, |
| 84 | [TLC4541] = { |
| 85 | .channels = tlc4541_channels, |
| 86 | .num_channels = ARRAY_SIZE(tlc4541_channels), |
| 87 | }, |
| 88 | }; |
| 89 | |
| 90 | static irqreturn_t tlc4541_trigger_handler(int irq, void *p) |
| 91 | { |
| 92 | struct iio_poll_func *pf = p; |
| 93 | struct iio_dev *indio_dev = pf->indio_dev; |
| 94 | struct tlc4541_state *st = iio_priv(indio_dev); |
| 95 | int ret; |
| 96 | |
| 97 | ret = spi_sync(st->spi, &st->scan_single_msg); |
| 98 | if (ret < 0) |
| 99 | goto done; |
| 100 | |
| 101 | iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf, |
| 102 | iio_get_time_ns(indio_dev)); |
| 103 | |
| 104 | done: |
| 105 | iio_trigger_notify_done(indio_dev->trig); |
| 106 | return IRQ_HANDLED; |
| 107 | } |
| 108 | |
| 109 | static int tlc4541_get_range(struct tlc4541_state *st) |
| 110 | { |
| 111 | int vref; |
| 112 | |
| 113 | vref = regulator_get_voltage(st->reg); |
| 114 | if (vref < 0) |
| 115 | return vref; |
| 116 | |
| 117 | vref /= 1000; |
| 118 | |
| 119 | return vref; |
| 120 | } |
| 121 | |
| 122 | static int tlc4541_read_raw(struct iio_dev *indio_dev, |
| 123 | struct iio_chan_spec const *chan, |
| 124 | int *val, |
| 125 | int *val2, |
| 126 | long m) |
| 127 | { |
| 128 | int ret = 0; |
| 129 | struct tlc4541_state *st = iio_priv(indio_dev); |
| 130 | |
| 131 | switch (m) { |
| 132 | case IIO_CHAN_INFO_RAW: |
| 133 | ret = iio_device_claim_direct_mode(indio_dev); |
| 134 | if (ret) |
| 135 | return ret; |
| 136 | ret = spi_sync(st->spi, &st->scan_single_msg); |
| 137 | iio_device_release_direct_mode(indio_dev); |
| 138 | if (ret < 0) |
| 139 | return ret; |
| 140 | *val = be16_to_cpu(st->rx_buf[0]); |
| 141 | *val = *val >> chan->scan_type.shift; |
| 142 | *val &= GENMASK(chan->scan_type.realbits - 1, 0); |
| 143 | return IIO_VAL_INT; |
| 144 | case IIO_CHAN_INFO_SCALE: |
| 145 | ret = tlc4541_get_range(st); |
| 146 | if (ret < 0) |
| 147 | return ret; |
| 148 | *val = ret; |
| 149 | *val2 = chan->scan_type.realbits; |
| 150 | return IIO_VAL_FRACTIONAL_LOG2; |
| 151 | } |
| 152 | return -EINVAL; |
| 153 | } |
| 154 | |
| 155 | static const struct iio_info tlc4541_info = { |
| 156 | .read_raw = &tlc4541_read_raw, |
| Phil Reid | ac2bec9 | 2017-01-16 16:38:24 +0800 | [diff] [blame] | 157 | }; |
| 158 | |
| 159 | static int tlc4541_probe(struct spi_device *spi) |
| 160 | { |
| 161 | struct tlc4541_state *st; |
| 162 | struct iio_dev *indio_dev; |
| 163 | const struct tlc4541_chip_info *info; |
| 164 | int ret; |
| 165 | int8_t device_init = 0; |
| 166 | |
| 167 | indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| 168 | if (indio_dev == NULL) |
| 169 | return -ENOMEM; |
| 170 | |
| 171 | st = iio_priv(indio_dev); |
| 172 | |
| 173 | spi_set_drvdata(spi, indio_dev); |
| 174 | |
| 175 | st->spi = spi; |
| 176 | |
| 177 | info = &tlc4541_chip_info[spi_get_device_id(spi)->driver_data]; |
| 178 | |
| 179 | indio_dev->name = spi_get_device_id(spi)->name; |
| 180 | indio_dev->dev.parent = &spi->dev; |
| 181 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 182 | indio_dev->channels = info->channels; |
| 183 | indio_dev->num_channels = info->num_channels; |
| 184 | indio_dev->info = &tlc4541_info; |
| 185 | |
| 186 | /* perform reset */ |
| 187 | spi_write(spi, &device_init, 1); |
| 188 | |
| 189 | /* Setup default message */ |
| 190 | st->scan_single_xfer[0].rx_buf = &st->rx_buf[0]; |
| 191 | st->scan_single_xfer[0].len = 3; |
| 192 | st->scan_single_xfer[1].delay_usecs = 3; |
| 193 | st->scan_single_xfer[2].rx_buf = &st->rx_buf[0]; |
| 194 | st->scan_single_xfer[2].len = 2; |
| 195 | |
| 196 | spi_message_init_with_transfers(&st->scan_single_msg, |
| 197 | st->scan_single_xfer, 3); |
| 198 | |
| 199 | st->reg = devm_regulator_get(&spi->dev, "vref"); |
| 200 | if (IS_ERR(st->reg)) |
| 201 | return PTR_ERR(st->reg); |
| 202 | |
| 203 | ret = regulator_enable(st->reg); |
| 204 | if (ret) |
| 205 | return ret; |
| 206 | |
| 207 | ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| 208 | &tlc4541_trigger_handler, NULL); |
| 209 | if (ret) |
| 210 | goto error_disable_reg; |
| 211 | |
| 212 | ret = iio_device_register(indio_dev); |
| 213 | if (ret) |
| 214 | goto error_cleanup_buffer; |
| 215 | |
| 216 | return 0; |
| 217 | |
| 218 | error_cleanup_buffer: |
| 219 | iio_triggered_buffer_cleanup(indio_dev); |
| 220 | error_disable_reg: |
| 221 | regulator_disable(st->reg); |
| 222 | |
| 223 | return ret; |
| 224 | } |
| 225 | |
| 226 | static int tlc4541_remove(struct spi_device *spi) |
| 227 | { |
| 228 | struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| 229 | struct tlc4541_state *st = iio_priv(indio_dev); |
| 230 | |
| 231 | iio_device_unregister(indio_dev); |
| 232 | iio_triggered_buffer_cleanup(indio_dev); |
| 233 | regulator_disable(st->reg); |
| 234 | |
| 235 | return 0; |
| 236 | } |
| 237 | |
| 238 | #ifdef CONFIG_OF |
| 239 | static const struct of_device_id tlc4541_dt_ids[] = { |
| 240 | { .compatible = "ti,tlc3541", }, |
| 241 | { .compatible = "ti,tlc4541", }, |
| 242 | {} |
| 243 | }; |
| 244 | MODULE_DEVICE_TABLE(of, tlc4541_dt_ids); |
| 245 | #endif |
| 246 | |
| 247 | static const struct spi_device_id tlc4541_id[] = { |
| 248 | {"tlc3541", TLC3541}, |
| 249 | {"tlc4541", TLC4541}, |
| 250 | {} |
| 251 | }; |
| 252 | MODULE_DEVICE_TABLE(spi, tlc4541_id); |
| 253 | |
| 254 | static struct spi_driver tlc4541_driver = { |
| 255 | .driver = { |
| 256 | .name = "tlc4541", |
| 257 | .of_match_table = of_match_ptr(tlc4541_dt_ids), |
| 258 | }, |
| 259 | .probe = tlc4541_probe, |
| 260 | .remove = tlc4541_remove, |
| 261 | .id_table = tlc4541_id, |
| 262 | }; |
| 263 | module_spi_driver(tlc4541_driver); |
| 264 | |
| 265 | MODULE_AUTHOR("Phil Reid <preid@electromag.com.au>"); |
| 266 | MODULE_DESCRIPTION("Texas Instruments TLC4541 ADC"); |
| 267 | MODULE_LICENSE("GPL v2"); |