Pavel Roskin | ec82905 | 2005-09-01 20:08:56 -0400 | [diff] [blame^] | 1 | /* orinoco_nortel.c |
| 2 | * |
| 3 | * Driver for Prism II devices which would usually be driven by orinoco_cs, |
| 4 | * but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter. |
| 5 | * |
| 6 | * Copyright (C) 2002 Tobias Hoffmann |
| 7 | * (C) 2003 Christoph Jungegger <disdos@traum404.de> |
| 8 | * |
| 9 | * Some of this code is borrowed from orinoco_plx.c |
| 10 | * Copyright (C) 2001 Daniel Barlow |
| 11 | * Some of this code is borrowed from orinoco_pci.c |
| 12 | * Copyright (C) 2001 Jean Tourrilhes |
| 13 | * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing |
| 14 | * has been copied from it. linux-wlan-ng-0.1.10 is originally : |
| 15 | * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
| 16 | * |
| 17 | * The contents of this file are subject to the Mozilla Public License |
| 18 | * Version 1.1 (the "License"); you may not use this file except in |
| 19 | * compliance with the License. You may obtain a copy of the License |
| 20 | * at http://www.mozilla.org/MPL/ |
| 21 | * |
| 22 | * Software distributed under the License is distributed on an "AS IS" |
| 23 | * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See |
| 24 | * the License for the specific language governing rights and |
| 25 | * limitations under the License. |
| 26 | * |
| 27 | * Alternatively, the contents of this file may be used under the |
| 28 | * terms of the GNU General Public License version 2 (the "GPL"), in |
| 29 | * which case the provisions of the GPL are applicable instead of the |
| 30 | * above. If you wish to allow the use of your version of this file |
| 31 | * only under the terms of the GPL and not to allow others to use your |
| 32 | * version of this file under the MPL, indicate your decision by |
| 33 | * deleting the provisions above and replace them with the notice and |
| 34 | * other provisions required by the GPL. If you do not delete the |
| 35 | * provisions above, a recipient may use your version of this file |
| 36 | * under either the MPL or the GPL. |
| 37 | */ |
| 38 | |
| 39 | #define DRIVER_NAME "orinoco_nortel" |
| 40 | #define PFX DRIVER_NAME ": " |
| 41 | |
| 42 | #include <linux/config.h> |
| 43 | |
| 44 | #include <linux/module.h> |
| 45 | #include <linux/kernel.h> |
| 46 | #include <linux/init.h> |
| 47 | #include <linux/sched.h> |
| 48 | #include <linux/ptrace.h> |
| 49 | #include <linux/slab.h> |
| 50 | #include <linux/string.h> |
| 51 | #include <linux/timer.h> |
| 52 | #include <linux/ioport.h> |
| 53 | #include <asm/uaccess.h> |
| 54 | #include <asm/io.h> |
| 55 | #include <asm/system.h> |
| 56 | #include <linux/netdevice.h> |
| 57 | #include <linux/if_arp.h> |
| 58 | #include <linux/etherdevice.h> |
| 59 | #include <linux/list.h> |
| 60 | #include <linux/pci.h> |
| 61 | #include <linux/fcntl.h> |
| 62 | |
| 63 | #include <pcmcia/cisreg.h> |
| 64 | |
| 65 | #include "hermes.h" |
| 66 | #include "orinoco.h" |
| 67 | |
| 68 | #define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ |
| 69 | #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ |
| 70 | |
| 71 | |
| 72 | /* Nortel specific data */ |
| 73 | struct nortel_pci_card { |
| 74 | unsigned long iobase1; |
| 75 | unsigned long iobase2; |
| 76 | }; |
| 77 | |
| 78 | /* |
| 79 | * Do a soft reset of the PCI card using the Configuration Option Register |
| 80 | * We need this to get going... |
| 81 | * This is the part of the code that is strongly inspired from wlan-ng |
| 82 | * |
| 83 | * Note bis : Don't try to access HERMES_CMD during the reset phase. |
| 84 | * It just won't work ! |
| 85 | */ |
| 86 | static int nortel_pci_cor_reset(struct orinoco_private *priv) |
| 87 | { |
| 88 | struct nortel_pci_card *card = priv->card; |
| 89 | |
| 90 | /* Assert the reset until the card notice */ |
| 91 | outw_p(8, card->iobase1 + 2); |
| 92 | inw(card->iobase2 + COR_OFFSET); |
| 93 | outw_p(0x80, card->iobase2 + COR_OFFSET); |
| 94 | mdelay(1); |
| 95 | |
| 96 | /* Give time for the card to recover from this hard effort */ |
| 97 | outw_p(0, card->iobase2 + COR_OFFSET); |
| 98 | outw_p(0, card->iobase2 + COR_OFFSET); |
| 99 | mdelay(1); |
| 100 | |
| 101 | /* set COR as usual */ |
| 102 | outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); |
| 103 | outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); |
| 104 | mdelay(1); |
| 105 | |
| 106 | outw_p(0x228, card->iobase1 + 2); |
| 107 | |
| 108 | return 0; |
| 109 | } |
| 110 | |
| 111 | int nortel_pci_hw_init(struct nortel_pci_card *card) |
| 112 | { |
| 113 | int i; |
| 114 | u32 reg; |
| 115 | |
| 116 | /* setup bridge */ |
| 117 | if (inw(card->iobase1) & 1) { |
| 118 | printk(KERN_ERR PFX "brg1 answer1 wrong\n"); |
| 119 | return -EBUSY; |
| 120 | } |
| 121 | outw_p(0x118, card->iobase1 + 2); |
| 122 | outw_p(0x108, card->iobase1 + 2); |
| 123 | mdelay(30); |
| 124 | outw_p(0x8, card->iobase1 + 2); |
| 125 | for (i = 0; i < 30; i++) { |
| 126 | mdelay(30); |
| 127 | if (inw(card->iobase1) & 0x10) { |
| 128 | break; |
| 129 | } |
| 130 | } |
| 131 | if (i == 30) { |
| 132 | printk(KERN_ERR PFX "brg1 timed out\n"); |
| 133 | return -EBUSY; |
| 134 | } |
| 135 | if (inw(card->iobase2 + 0xe0) & 1) { |
| 136 | printk(KERN_ERR PFX "brg2 answer1 wrong\n"); |
| 137 | return -EBUSY; |
| 138 | } |
| 139 | if (inw(card->iobase2 + 0xe2) & 1) { |
| 140 | printk(KERN_ERR PFX "brg2 answer2 wrong\n"); |
| 141 | return -EBUSY; |
| 142 | } |
| 143 | if (inw(card->iobase2 + 0xe4) & 1) { |
| 144 | printk(KERN_ERR PFX "brg2 answer3 wrong\n"); |
| 145 | return -EBUSY; |
| 146 | } |
| 147 | |
| 148 | /* set the PCMCIA COR-Register */ |
| 149 | outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); |
| 150 | mdelay(1); |
| 151 | reg = inw(card->iobase2 + COR_OFFSET); |
| 152 | if (reg != COR_VALUE) { |
| 153 | printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", |
| 154 | reg); |
| 155 | return -EBUSY; |
| 156 | } |
| 157 | |
| 158 | /* set leds */ |
| 159 | outw_p(1, card->iobase1 + 10); |
| 160 | return 0; |
| 161 | } |
| 162 | |
| 163 | static int nortel_pci_init_one(struct pci_dev *pdev, |
| 164 | const struct pci_device_id *ent) |
| 165 | { |
| 166 | int err; |
| 167 | struct orinoco_private *priv; |
| 168 | struct nortel_pci_card *card; |
| 169 | struct net_device *dev; |
| 170 | void __iomem *iomem; |
| 171 | |
| 172 | err = pci_enable_device(pdev); |
| 173 | if (err) { |
| 174 | printk(KERN_ERR PFX "Cannot enable PCI device\n"); |
| 175 | return err; |
| 176 | } |
| 177 | |
| 178 | err = pci_request_regions(pdev, DRIVER_NAME); |
| 179 | if (err != 0) { |
| 180 | printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); |
| 181 | goto fail_resources; |
| 182 | } |
| 183 | |
| 184 | iomem = pci_iomap(pdev, 3, 0); |
| 185 | if (!iomem) { |
| 186 | err = -ENOMEM; |
| 187 | goto fail_map_io; |
| 188 | } |
| 189 | |
| 190 | /* Allocate network device */ |
| 191 | dev = alloc_orinocodev(sizeof(*card), nortel_pci_cor_reset); |
| 192 | if (!dev) { |
| 193 | printk(KERN_ERR PFX "Cannot allocate network device\n"); |
| 194 | err = -ENOMEM; |
| 195 | goto fail_alloc; |
| 196 | } |
| 197 | |
| 198 | priv = netdev_priv(dev); |
| 199 | card = priv->card; |
| 200 | card->iobase1 = pci_resource_start(pdev, 0); |
| 201 | card->iobase2 = pci_resource_start(pdev, 1); |
| 202 | dev->base_addr = pci_resource_start(pdev, 2); |
| 203 | SET_MODULE_OWNER(dev); |
| 204 | SET_NETDEV_DEV(dev, &pdev->dev); |
| 205 | |
| 206 | hermes_struct_init(&priv->hw, iomem, HERMES_16BIT_REGSPACING); |
| 207 | |
| 208 | printk(KERN_DEBUG PFX "Detected Nortel PCI device at %s irq:%d, " |
| 209 | "io addr:0x%lx\n", pci_name(pdev), pdev->irq, dev->base_addr); |
| 210 | |
| 211 | err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, |
| 212 | dev->name, dev); |
| 213 | if (err) { |
| 214 | printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); |
| 215 | err = -EBUSY; |
| 216 | goto fail_irq; |
| 217 | } |
| 218 | dev->irq = pdev->irq; |
| 219 | |
| 220 | err = nortel_pci_hw_init(card); |
| 221 | if (err) { |
| 222 | printk(KERN_ERR PFX "Hardware initialization failed\n"); |
| 223 | goto fail; |
| 224 | } |
| 225 | |
| 226 | err = nortel_pci_cor_reset(priv); |
| 227 | if (err) { |
| 228 | printk(KERN_ERR PFX "Initial reset failed\n"); |
| 229 | goto fail; |
| 230 | } |
| 231 | |
| 232 | |
| 233 | err = register_netdev(dev); |
| 234 | if (err) { |
| 235 | printk(KERN_ERR PFX "Cannot register network device\n"); |
| 236 | goto fail; |
| 237 | } |
| 238 | |
| 239 | pci_set_drvdata(pdev, dev); |
| 240 | |
| 241 | return 0; |
| 242 | |
| 243 | fail: |
| 244 | free_irq(pdev->irq, dev); |
| 245 | |
| 246 | fail_irq: |
| 247 | pci_set_drvdata(pdev, NULL); |
| 248 | free_orinocodev(dev); |
| 249 | |
| 250 | fail_alloc: |
| 251 | pci_iounmap(pdev, iomem); |
| 252 | |
| 253 | fail_map_io: |
| 254 | pci_release_regions(pdev); |
| 255 | |
| 256 | fail_resources: |
| 257 | pci_disable_device(pdev); |
| 258 | |
| 259 | return err; |
| 260 | } |
| 261 | |
| 262 | static void __devexit nortel_pci_remove_one(struct pci_dev *pdev) |
| 263 | { |
| 264 | struct net_device *dev = pci_get_drvdata(pdev); |
| 265 | struct orinoco_private *priv = netdev_priv(dev); |
| 266 | struct nortel_pci_card *card = priv->card; |
| 267 | |
| 268 | /* clear leds */ |
| 269 | outw_p(0, card->iobase1 + 10); |
| 270 | |
| 271 | unregister_netdev(dev); |
| 272 | free_irq(dev->irq, dev); |
| 273 | pci_set_drvdata(pdev, NULL); |
| 274 | free_orinocodev(dev); |
| 275 | pci_iounmap(pdev, priv->hw.iobase); |
| 276 | pci_release_regions(pdev); |
| 277 | pci_disable_device(pdev); |
| 278 | } |
| 279 | |
| 280 | |
| 281 | static struct pci_device_id nortel_pci_id_table[] = { |
| 282 | /* Nortel emobility PCI */ |
| 283 | {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, |
| 284 | {0,}, |
| 285 | }; |
| 286 | |
| 287 | MODULE_DEVICE_TABLE(pci, nortel_pci_id_table); |
| 288 | |
| 289 | static struct pci_driver nortel_pci_driver = { |
| 290 | .name = DRIVER_NAME, |
| 291 | .id_table = nortel_pci_id_table, |
| 292 | .probe = nortel_pci_init_one, |
| 293 | .remove = __devexit_p(nortel_pci_remove_one), |
| 294 | }; |
| 295 | |
| 296 | static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| 297 | " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; |
| 298 | MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); |
| 299 | MODULE_DESCRIPTION |
| 300 | ("Driver for wireless LAN cards using the Nortel PCI bridge"); |
| 301 | MODULE_LICENSE("Dual MPL/GPL"); |
| 302 | |
| 303 | static int __init nortel_pci_init(void) |
| 304 | { |
| 305 | printk(KERN_DEBUG "%s\n", version); |
| 306 | return pci_module_init(&nortel_pci_driver); |
| 307 | } |
| 308 | |
| 309 | static void __exit nortel_pci_exit(void) |
| 310 | { |
| 311 | pci_unregister_driver(&nortel_pci_driver); |
| 312 | ssleep(1); |
| 313 | } |
| 314 | |
| 315 | module_init(nortel_pci_init); |
| 316 | module_exit(nortel_pci_exit); |
| 317 | |
| 318 | /* |
| 319 | * Local variables: |
| 320 | * c-indent-level: 8 |
| 321 | * c-basic-offset: 8 |
| 322 | * tab-width: 8 |
| 323 | * End: |
| 324 | */ |