arch/x86/include/asm/thread_info.h

/* thread_info.h: low-level thread information
 *
 * Copyright (C) 2002  David Howells (dhowells@redhat.com)
 * - Incorporating suggestions made by Linus Torvalds and Dave Miller
 */

#ifndef _ASM_X86_THREAD_INFO_H
#define _ASM_X86_THREAD_INFO_H

#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/percpu.h>
#include <asm/types.h>

/*
 * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
 * reserve at the top of the kernel stack.  We do it because of a nasty
 * 32-bit corner case.  On x86_32, the hardware stack frame is
 * variable-length.  Except for vm86 mode, struct pt_regs assumes a
 * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
 * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
 * does in at least one case:
 *
 * If we take an NMI early enough in SYSENTER, then we can end up with
 * pt_regs that extends above sp0.  On the way out, in the espfix code,
 * we can read the saved SS value, but that value will be above sp0.
 * Without this offset, that can result in a page fault.  (We are
 * careful that, in this case, the value we read doesn't matter.)
 *
 * In vm86 mode, the hardware frame is much longer still, but we neither
 * access the extra members from NMI context, nor do we write such a
 * frame at sp0 at all.
 *
 * x86_64 has a fixed-length stack frame.
 */
#ifdef CONFIG_X86_32
# define TOP_OF_KERNEL_STACK_PADDING 8
#else
# define TOP_OF_KERNEL_STACK_PADDING 0
#endif

/*
 * low level task data that entry.S needs immediate access to
 * - this struct should fit entirely inside of one cache line
 * - this struct shares the supervisor stack pages
 */
#ifndef __ASSEMBLY__
struct task_struct;
struct exec_domain;
#include <asm/processor.h>
#include <linux/atomic.h>

struct thread_info {
	struct task_struct	*task;		/* main task structure */
	struct exec_domain	*exec_domain;	/* execution domain */
	__u32			flags;		/* low level flags */
	__u32			status;		/* thread synchronous flags */
	__u32			cpu;		/* current CPU */
	int			saved_preempt_count;
	mm_segment_t		addr_limit;
	void __user		*sysenter_return;
	unsigned int		sig_on_uaccess_error:1;
	unsigned int		uaccess_err:1;	/* uaccess failed */
};

#define INIT_THREAD_INFO(tsk)			\
{						\
	.task		= &tsk,			\
	.exec_domain	= &default_exec_domain,	\
	.flags		= 0,			\
	.cpu		= 0,			\
	.saved_preempt_count = INIT_PREEMPT_COUNT,	\
	.addr_limit	= KERNEL_DS,		\
}

#define init_thread_info	(init_thread_union.thread_info)
#define init_stack		(init_thread_union.stack)

#else /* !__ASSEMBLY__ */

#include <asm/asm-offsets.h>

#endif

/*
 * thread information flags
 * - these are process state flags that various assembly files
 *   may need to access
 * - pending work-to-be-done flags are in LSW
 * - other flags in MSW
 * Warning: layout of LSW is hardcoded in entry.S
 */
#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
#define TIF_SIGPENDING		2	/* signal pending */
#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
#define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
#define TIF_SYSCALL_EMU		6	/* syscall emulation active */
#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
#define TIF_SECCOMP		8	/* secure computing */
#define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
#define TIF_UPROBE		12	/* breakpointed or singlestepping */
#define TIF_NOTSC		16	/* TSC is not accessible in userland */
#define TIF_IA32		17	/* IA32 compatibility process */
#define TIF_FORK		18	/* ret_from_fork */
#define TIF_NOHZ		19	/* in adaptive nohz mode */
#define TIF_MEMDIE		20	/* is terminating due to OOM killer */
#define TIF_POLLING_NRFLAG	21	/* idle is polling for TIF_NEED_RESCHED */
#define TIF_IO_BITMAP		22	/* uses I/O bitmap */
#define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
#define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
#define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
#define TIF_SYSCALL_TRACEPOINT	28	/* syscall tracepoint instrumentation */
#define TIF_ADDR32		29	/* 32-bit address space on 64 bits */
#define TIF_X32			30	/* 32-bit native x86-64 binary */

#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
#define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
#define _TIF_UPROBE		(1 << TIF_UPROBE)
#define _TIF_NOTSC		(1 << TIF_NOTSC)
#define _TIF_IA32		(1 << TIF_IA32)
#define _TIF_FORK		(1 << TIF_FORK)
#define _TIF_NOHZ		(1 << TIF_NOHZ)
#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
#define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
#define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
#define _TIF_ADDR32		(1 << TIF_ADDR32)
#define _TIF_X32		(1 << TIF_X32)

/* work to do in syscall_trace_enter() */
#define _TIF_WORK_SYSCALL_ENTRY	\
	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |	\
	 _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT |	\
	 _TIF_NOHZ)

/* work to do in syscall_trace_leave() */
#define _TIF_WORK_SYSCALL_EXIT	\
	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP |	\
	 _TIF_SYSCALL_TRACEPOINT | _TIF_NOHZ)

/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK							\
	(0x0000FFFF &							\
	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|			\
	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))

/* work to do on any return to user space */
#define _TIF_ALLWORK_MASK						\
	((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT |	\
	_TIF_NOHZ)

/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK						\
	(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME |				\
	 _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)

/* flags to check in __switch_to() */
#define _TIF_WORK_CTXSW							\
	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)

#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)

#define STACK_WARN		(THREAD_SIZE/8)

/*
 * macros/functions for gaining access to the thread information structure
 *
 * preempt_count needs to be 1 initially, until the scheduler is functional.
 */
#ifndef __ASSEMBLY__

DECLARE_PER_CPU(unsigned long, kernel_stack);

static inline struct thread_info *current_thread_info(void)
{
	return (struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
}

static inline unsigned long current_stack_pointer(void)
{
	unsigned long sp;
#ifdef CONFIG_X86_64
	asm("mov %%rsp,%0" : "=g" (sp));
#else
	asm("mov %%esp,%0" : "=g" (sp));
#endif
	return sp;
}

#else /* !__ASSEMBLY__ */

/* Load thread_info address into "reg" */
#define GET_THREAD_INFO(reg) \
	_ASM_MOV PER_CPU_VAR(kernel_stack),reg ; \
	_ASM_SUB $(THREAD_SIZE),reg ;

/*
 * ASM operand which evaluates to thread_info address
 * if it is known that "reg" is exactly "off" bytes below stack top.
 * Example (fetch thread_info->fieldname):
 *  mov TI_fieldname+THREAD_INFO(reg, off),%eax
 */
#define THREAD_INFO(reg, off) ((off)-THREAD_SIZE)(reg)

#endif

/*
 * Thread-synchronous status.
 *
 * This is different from the flags in that nobody else
 * ever touches our thread-synchronous status, so we don't
 * have to worry about atomic accesses.
 */
#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */

#ifndef __ASSEMBLY__
#define HAVE_SET_RESTORE_SIGMASK	1
static inline void set_restore_sigmask(void)
{
	struct thread_info *ti = current_thread_info();
	ti->status |= TS_RESTORE_SIGMASK;
	WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
}
static inline void clear_restore_sigmask(void)
{
	current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
}
static inline bool test_restore_sigmask(void)
{
	return current_thread_info()->status & TS_RESTORE_SIGMASK;
}
static inline bool test_and_clear_restore_sigmask(void)
{
	struct thread_info *ti = current_thread_info();
	if (!(ti->status & TS_RESTORE_SIGMASK))
		return false;
	ti->status &= ~TS_RESTORE_SIGMASK;
	return true;
}

static inline bool is_ia32_task(void)
{
#ifdef CONFIG_X86_32
	return true;
#endif
#ifdef CONFIG_IA32_EMULATION
	if (current_thread_info()->status & TS_COMPAT)
		return true;
#endif
	return false;
}

/*
 * Force syscall return via IRET by making it look as if there was
 * some work pending. IRET is our most capable (but slowest) syscall
 * return path, which is able to restore modified SS, CS and certain
 * EFLAGS values that other (fast) syscall return instructions
 * are not able to restore properly.
 */
#define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)

#endif	/* !__ASSEMBLY__ */

#ifndef __ASSEMBLY__
extern void arch_task_cache_init(void);
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
extern void arch_release_task_struct(struct task_struct *tsk);
#endif
#endif /* _ASM_X86_THREAD_INFO_H */