Michael Hennerich | ef72af4 | 2009-09-22 16:46:39 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * GPIO driver for Analog Devices ADP5520 MFD PMICs |
| 3 | * |
| 4 | * Copyright 2009 Analog Devices Inc. |
| 5 | * |
| 6 | * Licensed under the GPL-2 or later. |
| 7 | */ |
| 8 | |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/init.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/mfd/adp5520.h> |
| 14 | |
| 15 | #include <linux/gpio.h> |
| 16 | |
| 17 | struct adp5520_gpio { |
| 18 | struct device *master; |
| 19 | struct gpio_chip gpio_chip; |
| 20 | unsigned char lut[ADP5520_MAXGPIOS]; |
| 21 | unsigned long output; |
| 22 | }; |
| 23 | |
| 24 | static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off) |
| 25 | { |
| 26 | struct adp5520_gpio *dev; |
| 27 | uint8_t reg_val; |
| 28 | |
| 29 | dev = container_of(chip, struct adp5520_gpio, gpio_chip); |
| 30 | |
| 31 | /* |
| 32 | * There are dedicated registers for GPIO IN/OUT. |
| 33 | * Make sure we return the right value, even when configured as output |
| 34 | */ |
| 35 | |
| 36 | if (test_bit(off, &dev->output)) |
| 37 | adp5520_read(dev->master, GPIO_OUT, ®_val); |
| 38 | else |
| 39 | adp5520_read(dev->master, GPIO_IN, ®_val); |
| 40 | |
| 41 | return !!(reg_val & dev->lut[off]); |
| 42 | } |
| 43 | |
| 44 | static void adp5520_gpio_set_value(struct gpio_chip *chip, |
| 45 | unsigned off, int val) |
| 46 | { |
| 47 | struct adp5520_gpio *dev; |
| 48 | dev = container_of(chip, struct adp5520_gpio, gpio_chip); |
| 49 | |
| 50 | if (val) |
| 51 | adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]); |
| 52 | else |
| 53 | adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]); |
| 54 | } |
| 55 | |
| 56 | static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off) |
| 57 | { |
| 58 | struct adp5520_gpio *dev; |
| 59 | dev = container_of(chip, struct adp5520_gpio, gpio_chip); |
| 60 | |
| 61 | clear_bit(off, &dev->output); |
| 62 | |
| 63 | return adp5520_clr_bits(dev->master, GPIO_CFG_2, dev->lut[off]); |
| 64 | } |
| 65 | |
| 66 | static int adp5520_gpio_direction_output(struct gpio_chip *chip, |
| 67 | unsigned off, int val) |
| 68 | { |
| 69 | struct adp5520_gpio *dev; |
| 70 | int ret = 0; |
| 71 | dev = container_of(chip, struct adp5520_gpio, gpio_chip); |
| 72 | |
| 73 | set_bit(off, &dev->output); |
| 74 | |
| 75 | if (val) |
| 76 | ret |= adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]); |
| 77 | else |
| 78 | ret |= adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]); |
| 79 | |
| 80 | ret |= adp5520_set_bits(dev->master, GPIO_CFG_2, dev->lut[off]); |
| 81 | |
| 82 | return ret; |
| 83 | } |
| 84 | |
| 85 | static int __devinit adp5520_gpio_probe(struct platform_device *pdev) |
| 86 | { |
| 87 | struct adp5520_gpio_platfrom_data *pdata = pdev->dev.platform_data; |
| 88 | struct adp5520_gpio *dev; |
| 89 | struct gpio_chip *gc; |
| 90 | int ret, i, gpios; |
| 91 | unsigned char ctl_mask = 0; |
| 92 | |
| 93 | if (pdata == NULL) { |
| 94 | dev_err(&pdev->dev, "missing platform data\n"); |
| 95 | return -ENODEV; |
| 96 | } |
| 97 | |
| 98 | if (pdev->id != ID_ADP5520) { |
| 99 | dev_err(&pdev->dev, "only ADP5520 supports GPIO\n"); |
| 100 | return -ENODEV; |
| 101 | } |
| 102 | |
| 103 | dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| 104 | if (dev == NULL) { |
| 105 | dev_err(&pdev->dev, "failed to alloc memory\n"); |
| 106 | return -ENOMEM; |
| 107 | } |
| 108 | |
| 109 | dev->master = pdev->dev.parent; |
| 110 | |
| 111 | for (gpios = 0, i = 0; i < ADP5520_MAXGPIOS; i++) |
| 112 | if (pdata->gpio_en_mask & (1 << i)) |
| 113 | dev->lut[gpios++] = 1 << i; |
| 114 | |
| 115 | if (gpios < 1) { |
| 116 | ret = -EINVAL; |
| 117 | goto err; |
| 118 | } |
| 119 | |
| 120 | gc = &dev->gpio_chip; |
| 121 | gc->direction_input = adp5520_gpio_direction_input; |
| 122 | gc->direction_output = adp5520_gpio_direction_output; |
| 123 | gc->get = adp5520_gpio_get_value; |
| 124 | gc->set = adp5520_gpio_set_value; |
| 125 | gc->can_sleep = 1; |
| 126 | |
| 127 | gc->base = pdata->gpio_start; |
| 128 | gc->ngpio = gpios; |
| 129 | gc->label = pdev->name; |
| 130 | gc->owner = THIS_MODULE; |
| 131 | |
| 132 | ret = adp5520_clr_bits(dev->master, GPIO_CFG_1, |
| 133 | pdata->gpio_en_mask); |
| 134 | |
| 135 | if (pdata->gpio_en_mask & GPIO_C3) |
| 136 | ctl_mask |= C3_MODE; |
| 137 | |
| 138 | if (pdata->gpio_en_mask & GPIO_R3) |
| 139 | ctl_mask |= R3_MODE; |
| 140 | |
| 141 | if (ctl_mask) |
| 142 | ret = adp5520_set_bits(dev->master, LED_CONTROL, |
| 143 | ctl_mask); |
| 144 | |
| 145 | ret |= adp5520_set_bits(dev->master, GPIO_PULLUP, |
| 146 | pdata->gpio_pullup_mask); |
| 147 | |
| 148 | if (ret) { |
| 149 | dev_err(&pdev->dev, "failed to write\n"); |
| 150 | goto err; |
| 151 | } |
| 152 | |
| 153 | ret = gpiochip_add(&dev->gpio_chip); |
| 154 | if (ret) |
| 155 | goto err; |
| 156 | |
| 157 | platform_set_drvdata(pdev, dev); |
| 158 | return 0; |
| 159 | |
| 160 | err: |
| 161 | kfree(dev); |
| 162 | return ret; |
| 163 | } |
| 164 | |
| 165 | static int __devexit adp5520_gpio_remove(struct platform_device *pdev) |
| 166 | { |
| 167 | struct adp5520_gpio *dev; |
| 168 | int ret; |
| 169 | |
| 170 | dev = platform_get_drvdata(pdev); |
| 171 | ret = gpiochip_remove(&dev->gpio_chip); |
| 172 | if (ret) { |
| 173 | dev_err(&pdev->dev, "%s failed, %d\n", |
| 174 | "gpiochip_remove()", ret); |
| 175 | return ret; |
| 176 | } |
| 177 | |
| 178 | kfree(dev); |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | static struct platform_driver adp5520_gpio_driver = { |
| 183 | .driver = { |
| 184 | .name = "adp5520-gpio", |
| 185 | .owner = THIS_MODULE, |
| 186 | }, |
| 187 | .probe = adp5520_gpio_probe, |
| 188 | .remove = __devexit_p(adp5520_gpio_remove), |
| 189 | }; |
| 190 | |
| 191 | static int __init adp5520_gpio_init(void) |
| 192 | { |
| 193 | return platform_driver_register(&adp5520_gpio_driver); |
| 194 | } |
| 195 | module_init(adp5520_gpio_init); |
| 196 | |
| 197 | static void __exit adp5520_gpio_exit(void) |
| 198 | { |
| 199 | platform_driver_unregister(&adp5520_gpio_driver); |
| 200 | } |
| 201 | module_exit(adp5520_gpio_exit); |
| 202 | |
| 203 | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| 204 | MODULE_DESCRIPTION("GPIO ADP5520 Driver"); |
| 205 | MODULE_LICENSE("GPL"); |
| 206 | MODULE_ALIAS("platform:adp5520-gpio"); |