| HeungJun, Kim | bc12510 | 2011-05-20 02:27:28 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Register map for M-5MOLS 8M Pixel camera sensor with ISP |
| 3 | * |
| 4 | * Copyright (C) 2011 Samsung Electronics Co., Ltd. |
| 5 | * Author: HeungJun Kim, riverful.kim@samsung.com |
| 6 | * |
| 7 | * Copyright (C) 2009 Samsung Electronics Co., Ltd. |
| 8 | * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | */ |
| 15 | |
| 16 | #ifndef M5MOLS_REG_H |
| 17 | #define M5MOLS_REG_H |
| 18 | |
| 19 | #define M5MOLS_I2C_MAX_SIZE 4 |
| 20 | #define M5MOLS_BYTE_READ 0x01 |
| 21 | #define M5MOLS_BYTE_WRITE 0x02 |
| 22 | |
| 23 | #define I2C_CATEGORY(__cat) ((__cat >> 16) & 0xff) |
| 24 | #define I2C_COMMAND(__comm) ((__comm >> 8) & 0xff) |
| 25 | #define I2C_SIZE(__reg_s) ((__reg_s) & 0xff) |
| 26 | #define I2C_REG(__cat, __cmd, __reg_s) ((__cat << 16) | (__cmd << 8) | __reg_s) |
| 27 | |
| 28 | /* |
| 29 | * Category section register |
| 30 | * |
| 31 | * The category means set including relevant command of M-5MOLS. |
| 32 | */ |
| 33 | #define CAT_SYSTEM 0x00 |
| 34 | #define CAT_PARAM 0x01 |
| 35 | #define CAT_MONITOR 0x02 |
| 36 | #define CAT_AE 0x03 |
| 37 | #define CAT_WB 0x06 |
| 38 | #define CAT_EXIF 0x07 |
| 39 | #define CAT_FD 0x09 |
| 40 | #define CAT_LENS 0x0a |
| 41 | #define CAT_CAPT_PARM 0x0b |
| 42 | #define CAT_CAPT_CTRL 0x0c |
| 43 | #define CAT_FLASH 0x0f /* related to FW, revisions, booting */ |
| 44 | |
| 45 | /* |
| 46 | * Category 0 - SYSTEM mode |
| 47 | * |
| 48 | * The SYSTEM mode in the M-5MOLS means area available to handle with the whole |
| 49 | * & all-round system of sensor. It deals with version/interrupt/setting mode & |
| 50 | * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by |
| 51 | * packaging & manufacturer, even the customer and project code. And the |
| 52 | * function details may vary among them. The version information helps to |
| 53 | * determine what methods shall be used in the driver. |
| 54 | * |
| 55 | * There is many registers between customer version address and awb one. For |
| 56 | * more specific contents, see definition if file m5mols.h. |
| 57 | */ |
| 58 | #define CAT0_VER_CUSTOMER 0x00 /* customer version */ |
| 59 | #define CAT0_VER_AWB 0x09 /* Auto WB version */ |
| 60 | #define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ |
| 61 | #define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ |
| 62 | #define CAT0_STATUS 0x0c /* SYSTEM mode status register */ |
| 63 | #define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ |
| 64 | #define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ |
| 65 | |
| 66 | #define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) |
| 67 | #define REG_SYSINIT 0x00 /* SYSTEM mode */ |
| 68 | #define REG_PARAMETER 0x01 /* PARAMETER mode */ |
| 69 | #define REG_MONITOR 0x02 /* MONITOR mode */ |
| 70 | #define REG_CAPTURE 0x03 /* CAPTURE mode */ |
| 71 | |
| 72 | #define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) |
| 73 | #define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1) |
| 74 | #define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ |
| 75 | #define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ |
| 76 | #define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ |
| 77 | |
| 78 | #define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1) |
| 79 | #define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1) |
| 80 | #define REG_INT_MODE (1 << 0) |
| 81 | #define REG_INT_AF (1 << 1) |
| 82 | #define REG_INT_ZOOM (1 << 2) |
| 83 | #define REG_INT_CAPTURE (1 << 3) |
| 84 | #define REG_INT_FRAMESYNC (1 << 4) |
| 85 | #define REG_INT_FD (1 << 5) |
| 86 | #define REG_INT_LENS_INIT (1 << 6) |
| 87 | #define REG_INT_SOUND (1 << 7) |
| 88 | #define REG_INT_MASK 0x0f |
| 89 | |
| 90 | /* |
| 91 | * category 1 - PARAMETER mode |
| 92 | * |
| 93 | * This category supports function of camera features of M-5MOLS. It means we |
| 94 | * can handle with preview(MONITOR) resolution size/frame per second/interface |
| 95 | * between the sensor and the Application Processor/even the image effect. |
| 96 | */ |
| 97 | #define CAT1_DATA_INTERFACE 0x00 /* interface between sensor and AP */ |
| 98 | #define CAT1_MONITOR_SIZE 0x01 /* resolution at the MONITOR mode */ |
| 99 | #define CAT1_MONITOR_FPS 0x02 /* frame per second at this mode */ |
| 100 | #define CAT1_EFFECT 0x0b /* image effects */ |
| 101 | |
| 102 | #define PARM_MON_SIZE I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1) |
| 103 | |
| 104 | #define PARM_MON_FPS I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1) |
| 105 | #define REG_FPS_30 0x02 |
| 106 | |
| 107 | #define PARM_INTERFACE I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1) |
| 108 | #define REG_INTERFACE_MIPI 0x02 |
| 109 | |
| 110 | #define PARM_EFFECT I2C_REG(CAT_PARAM, CAT1_EFFECT, 1) |
| 111 | #define REG_EFFECT_OFF 0x00 |
| 112 | #define REG_EFFECT_NEGA 0x01 |
| 113 | #define REG_EFFECT_EMBOSS 0x06 |
| 114 | #define REG_EFFECT_OUTLINE 0x07 |
| 115 | #define REG_EFFECT_WATERCOLOR 0x08 |
| 116 | |
| 117 | /* |
| 118 | * Category 2 - MONITOR mode |
| 119 | * |
| 120 | * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another |
| 121 | * mode named "Preview", but this preview mode is used at the case specific |
| 122 | * vider-recording mode. This mmode supports only YUYV format. On the other |
| 123 | * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are |
| 124 | * another options like zoom/color effect(different with effect in PARAMETER |
| 125 | * mode)/anti hand shaking algorithm. |
| 126 | */ |
| 127 | #define CAT2_ZOOM 0x01 /* set the zoom position & execute */ |
| 128 | #define CAT2_ZOOM_STEP 0x03 /* set the zoom step */ |
| 129 | #define CAT2_CFIXB 0x09 /* CB value for color effect */ |
| 130 | #define CAT2_CFIXR 0x0a /* CR value for color effect */ |
| 131 | #define CAT2_COLOR_EFFECT 0x0b /* set on/off of color effect */ |
| 132 | #define CAT2_CHROMA_LVL 0x0f /* set chroma level */ |
| 133 | #define CAT2_CHROMA_EN 0x10 /* set on/off of choroma */ |
| 134 | #define CAT2_EDGE_LVL 0x11 /* set sharpness level */ |
| 135 | #define CAT2_EDGE_EN 0x12 /* set on/off sharpness */ |
| 136 | #define CAT2_TONE_CTL 0x25 /* set tone color(contrast) */ |
| 137 | |
| 138 | #define MON_ZOOM I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1) |
| 139 | |
| 140 | #define MON_CFIXR I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1) |
| 141 | #define MON_CFIXB I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1) |
| 142 | #define REG_CFIXB_SEPIA 0xd8 |
| 143 | #define REG_CFIXR_SEPIA 0x18 |
| 144 | |
| 145 | #define MON_EFFECT I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1) |
| 146 | #define REG_COLOR_EFFECT_OFF 0x00 |
| 147 | #define REG_COLOR_EFFECT_ON 0x01 |
| 148 | |
| 149 | #define MON_CHROMA_EN I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1) |
| 150 | #define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1) |
| 151 | #define REG_CHROMA_OFF 0x00 |
| 152 | #define REG_CHROMA_ON 0x01 |
| 153 | |
| 154 | #define MON_EDGE_EN I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1) |
| 155 | #define MON_EDGE_LVL I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1) |
| 156 | #define REG_EDGE_OFF 0x00 |
| 157 | #define REG_EDGE_ON 0x01 |
| 158 | |
| 159 | #define MON_TONE_CTL I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1) |
| 160 | |
| 161 | /* |
| 162 | * Category 3 - Auto Exposure |
| 163 | * |
| 164 | * The M-5MOLS exposure capbility is detailed as which is similar to digital |
| 165 | * camera. This category supports AE locking/various AE mode(range of exposure) |
| 166 | * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the |
| 167 | * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be |
| 168 | * different. So, this category also provide getting the max/min values. And, |
| 169 | * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. |
| 170 | */ |
| 171 | #define CAT3_AE_LOCK 0x00 /* locking Auto exposure */ |
| 172 | #define CAT3_AE_MODE 0x01 /* set AE mode, mode means range */ |
| 173 | #define CAT3_ISO 0x05 /* set ISO */ |
| 174 | #define CAT3_EV_PRESET_MONITOR 0x0a /* EV(scenemode) preset for MONITOR */ |
| 175 | #define CAT3_EV_PRESET_CAPTURE 0x0b /* EV(scenemode) preset for CAPTURE */ |
| 176 | #define CAT3_MANUAL_GAIN_MON 0x12 /* meteoring value for the MONITOR */ |
| 177 | #define CAT3_MAX_GAIN_MON 0x1a /* max gain value for the MONITOR */ |
| 178 | #define CAT3_MANUAL_GAIN_CAP 0x26 /* meteoring value for the CAPTURE */ |
| 179 | #define CAT3_AE_INDEX 0x38 /* AE index */ |
| 180 | |
| 181 | #define AE_LOCK I2C_REG(CAT_AE, CAT3_AE_LOCK, 1) |
| 182 | #define REG_AE_UNLOCK 0x00 |
| 183 | #define REG_AE_LOCK 0x01 |
| 184 | |
| 185 | #define AE_MODE I2C_REG(CAT_AE, CAT3_AE_MODE, 1) |
| 186 | #define REG_AE_OFF 0x00 /* AE off */ |
| 187 | #define REG_AE_ALL 0x01 /* calc AE in all block integral */ |
| 188 | #define REG_AE_CENTER 0x03 /* calc AE in center weighted */ |
| 189 | #define REG_AE_SPOT 0x06 /* calc AE in specific spot */ |
| 190 | |
| 191 | #define AE_ISO I2C_REG(CAT_AE, CAT3_ISO, 1) |
| 192 | #define REG_ISO_AUTO 0x00 |
| 193 | #define REG_ISO_50 0x01 |
| 194 | #define REG_ISO_100 0x02 |
| 195 | #define REG_ISO_200 0x03 |
| 196 | #define REG_ISO_400 0x04 |
| 197 | #define REG_ISO_800 0x05 |
| 198 | |
| 199 | #define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1) |
| 200 | #define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1) |
| 201 | #define REG_SCENE_NORMAL 0x00 |
| 202 | #define REG_SCENE_PORTRAIT 0x01 |
| 203 | #define REG_SCENE_LANDSCAPE 0x02 |
| 204 | #define REG_SCENE_SPORTS 0x03 |
| 205 | #define REG_SCENE_PARTY_INDOOR 0x04 |
| 206 | #define REG_SCENE_BEACH_SNOW 0x05 |
| 207 | #define REG_SCENE_SUNSET 0x06 |
| 208 | #define REG_SCENE_DAWN_DUSK 0x07 |
| 209 | #define REG_SCENE_FALL 0x08 |
| 210 | #define REG_SCENE_NIGHT 0x09 |
| 211 | #define REG_SCENE_AGAINST_LIGHT 0x0a |
| 212 | #define REG_SCENE_FIRE 0x0b |
| 213 | #define REG_SCENE_TEXT 0x0c |
| 214 | #define REG_SCENE_CANDLE 0x0d |
| 215 | |
| 216 | #define AE_MAN_GAIN_MON I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2) |
| 217 | #define AE_MAX_GAIN_MON I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2) |
| 218 | #define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2) |
| 219 | |
| 220 | #define AE_INDEX I2C_REG(CAT_AE, CAT3_AE_INDEX, 1) |
| 221 | #define REG_AE_INDEX_20_NEG 0x00 |
| 222 | #define REG_AE_INDEX_15_NEG 0x01 |
| 223 | #define REG_AE_INDEX_10_NEG 0x02 |
| 224 | #define REG_AE_INDEX_05_NEG 0x03 |
| 225 | #define REG_AE_INDEX_00 0x04 |
| 226 | #define REG_AE_INDEX_05_POS 0x05 |
| 227 | #define REG_AE_INDEX_10_POS 0x06 |
| 228 | #define REG_AE_INDEX_15_POS 0x07 |
| 229 | #define REG_AE_INDEX_20_POS 0x08 |
| 230 | |
| 231 | /* |
| 232 | * Category 6 - White Balance |
| 233 | * |
| 234 | * This category provide AWB locking/mode/preset/speed/gain bias, etc. |
| 235 | */ |
| 236 | #define CAT6_AWB_LOCK 0x00 /* locking Auto Whitebalance */ |
| 237 | #define CAT6_AWB_MODE 0x02 /* set Auto or Manual */ |
| 238 | #define CAT6_AWB_MANUAL 0x03 /* set Manual(preset) value */ |
| 239 | |
| 240 | #define AWB_LOCK I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1) |
| 241 | #define REG_AWB_UNLOCK 0x00 |
| 242 | #define REG_AWB_LOCK 0x01 |
| 243 | |
| 244 | #define AWB_MODE I2C_REG(CAT_WB, CAT6_AWB_MODE, 1) |
| 245 | #define REG_AWB_AUTO 0x01 /* AWB off */ |
| 246 | #define REG_AWB_PRESET 0x02 /* AWB preset */ |
| 247 | |
| 248 | #define AWB_MANUAL I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1) |
| 249 | #define REG_AWB_INCANDESCENT 0x01 |
| 250 | #define REG_AWB_FLUORESCENT_1 0x02 |
| 251 | #define REG_AWB_FLUORESCENT_2 0x03 |
| 252 | #define REG_AWB_DAYLIGHT 0x04 |
| 253 | #define REG_AWB_CLOUDY 0x05 |
| 254 | #define REG_AWB_SHADE 0x06 |
| 255 | #define REG_AWB_HORIZON 0x07 |
| 256 | #define REG_AWB_LEDLIGHT 0x09 |
| 257 | |
| 258 | /* |
| 259 | * Category 7 - EXIF information |
| 260 | */ |
| 261 | #define CAT7_INFO_EXPTIME_NU 0x00 |
| 262 | #define CAT7_INFO_EXPTIME_DE 0x04 |
| 263 | #define CAT7_INFO_TV_NU 0x08 |
| 264 | #define CAT7_INFO_TV_DE 0x0c |
| 265 | #define CAT7_INFO_AV_NU 0x10 |
| 266 | #define CAT7_INFO_AV_DE 0x14 |
| 267 | #define CAT7_INFO_BV_NU 0x18 |
| 268 | #define CAT7_INFO_BV_DE 0x1c |
| 269 | #define CAT7_INFO_EBV_NU 0x20 |
| 270 | #define CAT7_INFO_EBV_DE 0x24 |
| 271 | #define CAT7_INFO_ISO 0x28 |
| 272 | #define CAT7_INFO_FLASH 0x2a |
| 273 | #define CAT7_INFO_SDR 0x2c |
| 274 | #define CAT7_INFO_QVAL 0x2e |
| 275 | |
| 276 | #define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4) |
| 277 | #define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4) |
| 278 | #define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4) |
| 279 | #define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4) |
| 280 | #define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4) |
| 281 | #define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4) |
| 282 | #define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4) |
| 283 | #define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4) |
| 284 | #define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4) |
| 285 | #define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4) |
| 286 | #define EXIF_INFO_ISO I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2) |
| 287 | #define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2) |
| 288 | #define EXIF_INFO_SDR I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2) |
| 289 | #define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2) |
| 290 | |
| 291 | /* |
| 292 | * Category 9 - Face Detection |
| 293 | */ |
| 294 | #define CAT9_FD_CTL 0x00 |
| 295 | |
| 296 | #define FD_CTL I2C_REG(CAT_FD, CAT9_FD_CTL, 1) |
| 297 | #define BIT_FD_EN 0 |
| 298 | #define BIT_FD_DRAW_FACE_FRAME 4 |
| 299 | #define BIT_FD_DRAW_SMILE_LVL 6 |
| 300 | #define REG_FD(shift) (1 << shift) |
| 301 | #define REG_FD_OFF 0x0 |
| 302 | |
| 303 | /* |
| 304 | * Category A - Lens Parameter |
| 305 | */ |
| 306 | #define CATA_AF_MODE 0x01 |
| 307 | #define CATA_AF_EXECUTE 0x02 |
| 308 | #define CATA_AF_STATUS 0x03 |
| 309 | #define CATA_AF_VERSION 0x0a |
| 310 | |
| 311 | #define AF_MODE I2C_REG(CAT_LENS, CATA_AF_MODE, 1) |
| 312 | #define REG_AF_NORMAL 0x00 /* Normal AF, one time */ |
| 313 | #define REG_AF_MACRO 0x01 /* Macro AF, one time */ |
| 314 | #define REG_AF_POWEROFF 0x07 |
| 315 | |
| 316 | #define AF_EXECUTE I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1) |
| 317 | #define REG_AF_STOP 0x00 |
| 318 | #define REG_AF_EXE_AUTO 0x01 |
| 319 | #define REG_AF_EXE_CAF 0x02 |
| 320 | |
| 321 | #define AF_STATUS I2C_REG(CAT_LENS, CATA_AF_STATUS, 1) |
| 322 | #define REG_AF_FAIL 0x00 |
| 323 | #define REG_AF_SUCCESS 0x02 |
| 324 | #define REG_AF_IDLE 0x04 |
| 325 | #define REG_AF_BUSY 0x05 |
| 326 | |
| 327 | #define AF_VERSION I2C_REG(CAT_LENS, CATA_AF_VERSION, 1) |
| 328 | |
| 329 | /* |
| 330 | * Category B - CAPTURE Parameter |
| 331 | */ |
| 332 | #define CATB_YUVOUT_MAIN 0x00 |
| 333 | #define CATB_MAIN_IMAGE_SIZE 0x01 |
| 334 | #define CATB_MCC_MODE 0x1d |
| 335 | #define CATB_WDR_EN 0x2c |
| 336 | #define CATB_LIGHT_CTRL 0x40 |
| 337 | #define CATB_FLASH_CTRL 0x41 |
| 338 | |
| 339 | #define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1) |
| 340 | #define REG_YUV422 0x00 |
| 341 | #define REG_BAYER10 0x05 |
| 342 | #define REG_BAYER8 0x06 |
| 343 | #define REG_JPEG 0x10 |
| 344 | |
| 345 | #define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1) |
| 346 | |
| 347 | #define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1) |
| 348 | #define REG_MCC_OFF 0x00 |
| 349 | #define REG_MCC_NORMAL 0x01 |
| 350 | |
| 351 | #define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1) |
| 352 | #define REG_WDR_OFF 0x00 |
| 353 | #define REG_WDR_ON 0x01 |
| 354 | #define REG_WDR_AUTO 0x02 |
| 355 | |
| 356 | #define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1) |
| 357 | #define REG_LIGHT_OFF 0x00 |
| 358 | #define REG_LIGHT_ON 0x01 |
| 359 | #define REG_LIGHT_AUTO 0x02 |
| 360 | |
| 361 | #define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1) |
| 362 | #define REG_FLASH_OFF 0x00 |
| 363 | #define REG_FLASH_ON 0x01 |
| 364 | #define REG_FLASH_AUTO 0x02 |
| 365 | |
| 366 | /* |
| 367 | * Category C - CAPTURE Control |
| 368 | */ |
| 369 | #define CATC_CAP_MODE 0x00 |
| 370 | #define CATC_CAP_SEL_FRAME 0x06 /* It determines Single or Multi */ |
| 371 | #define CATC_CAP_START 0x09 |
| 372 | #define CATC_CAP_IMAGE_SIZE 0x0d |
| 373 | #define CATC_CAP_THUMB_SIZE 0x11 |
| 374 | |
| 375 | #define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1) |
| 376 | #define REG_CAP_NONE 0x00 |
| 377 | #define REG_CAP_ANTI_SHAKE 0x02 |
| 378 | |
| 379 | #define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1) |
| 380 | |
| 381 | #define CAPC_START I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1) |
| 382 | #define REG_CAP_START_MAIN 0x01 |
| 383 | #define REG_CAP_START_THUMB 0x03 |
| 384 | |
| 385 | #define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1) |
| 386 | #define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1) |
| 387 | |
| 388 | /* |
| 389 | * Category F - Flash |
| 390 | * |
| 391 | * This mode provides functions about internal flash stuff and system startup. |
| 392 | */ |
| 393 | #define CATF_CAM_START 0x12 /* It starts internal ARM core booting |
| 394 | * after power-up */ |
| 395 | |
| 396 | #define FLASH_CAM_START I2C_REG(CAT_FLASH, CATF_CAM_START, 1) |
| 397 | #define REG_START_ARM_BOOT 0x01 |
| 398 | |
| 399 | #endif /* M5MOLS_REG_H */ |