Artem Bityutskiy | 1e51764 | 2008-07-14 19:08:37 +0300 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of UBIFS. |
| 3 | * |
| 4 | * Copyright (C) 2006-2008 Nokia Corporation. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License version 2 as published by |
| 8 | * the Free Software Foundation. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 11 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 12 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 13 | * more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License along with |
| 16 | * this program; if not, write to the Free Software Foundation, Inc., 51 |
| 17 | * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 18 | * |
| 19 | * Authors: Artem Bityutskiy (Битюцкий Артём) |
| 20 | * Adrian Hunter |
| 21 | */ |
| 22 | |
| 23 | /* |
| 24 | * This file implements UBIFS journal. |
| 25 | * |
| 26 | * The journal consists of 2 parts - the log and bud LEBs. The log has fixed |
| 27 | * length and position, while a bud logical eraseblock is any LEB in the main |
| 28 | * area. Buds contain file system data - data nodes, inode nodes, etc. The log |
| 29 | * contains only references to buds and some other stuff like commit |
| 30 | * start node. The idea is that when we commit the journal, we do |
| 31 | * not copy the data, the buds just become indexed. Since after the commit the |
| 32 | * nodes in bud eraseblocks become leaf nodes of the file system index tree, we |
| 33 | * use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will |
| 34 | * become leafs in the future. |
| 35 | * |
| 36 | * The journal is multi-headed because we want to write data to the journal as |
| 37 | * optimally as possible. It is nice to have nodes belonging to the same inode |
| 38 | * in one LEB, so we may write data owned by different inodes to different |
| 39 | * journal heads, although at present only one data head is used. |
| 40 | * |
| 41 | * For recovery reasons, the base head contains all inode nodes, all directory |
| 42 | * entry nodes and all truncate nodes. This means that the other heads contain |
| 43 | * only data nodes. |
| 44 | * |
| 45 | * Bud LEBs may be half-indexed. For example, if the bud was not full at the |
| 46 | * time of commit, the bud is retained to continue to be used in the journal, |
| 47 | * even though the "front" of the LEB is now indexed. In that case, the log |
| 48 | * reference contains the offset where the bud starts for the purposes of the |
| 49 | * journal. |
| 50 | * |
| 51 | * The journal size has to be limited, because the larger is the journal, the |
| 52 | * longer it takes to mount UBIFS (scanning the journal) and the more memory it |
| 53 | * takes (indexing in the TNC). |
| 54 | * |
| 55 | * All the journal write operations like 'ubifs_jnl_update()' here, which write |
| 56 | * multiple UBIFS nodes to the journal at one go, are atomic with respect to |
| 57 | * unclean reboots. Should the unclean reboot happen, the recovery code drops |
| 58 | * all the nodes. |
| 59 | */ |
| 60 | |
| 61 | #include "ubifs.h" |
| 62 | |
| 63 | /** |
| 64 | * zero_ino_node_unused - zero out unused fields of an on-flash inode node. |
| 65 | * @ino: the inode to zero out |
| 66 | */ |
| 67 | static inline void zero_ino_node_unused(struct ubifs_ino_node *ino) |
| 68 | { |
| 69 | memset(ino->padding1, 0, 4); |
| 70 | memset(ino->padding2, 0, 26); |
| 71 | } |
| 72 | |
| 73 | /** |
| 74 | * zero_dent_node_unused - zero out unused fields of an on-flash directory |
| 75 | * entry node. |
| 76 | * @dent: the directory entry to zero out |
| 77 | */ |
| 78 | static inline void zero_dent_node_unused(struct ubifs_dent_node *dent) |
| 79 | { |
| 80 | dent->padding1 = 0; |
| 81 | memset(dent->padding2, 0, 4); |
| 82 | } |
| 83 | |
| 84 | /** |
| 85 | * zero_data_node_unused - zero out unused fields of an on-flash data node. |
| 86 | * @data: the data node to zero out |
| 87 | */ |
| 88 | static inline void zero_data_node_unused(struct ubifs_data_node *data) |
| 89 | { |
| 90 | memset(data->padding, 0, 2); |
| 91 | } |
| 92 | |
| 93 | /** |
| 94 | * zero_trun_node_unused - zero out unused fields of an on-flash truncation |
| 95 | * node. |
| 96 | * @trun: the truncation node to zero out |
| 97 | */ |
| 98 | static inline void zero_trun_node_unused(struct ubifs_trun_node *trun) |
| 99 | { |
| 100 | memset(trun->padding, 0, 12); |
| 101 | } |
| 102 | |
| 103 | /** |
| 104 | * reserve_space - reserve space in the journal. |
| 105 | * @c: UBIFS file-system description object |
| 106 | * @jhead: journal head number |
| 107 | * @len: node length |
| 108 | * |
| 109 | * This function reserves space in journal head @head. If the reservation |
| 110 | * succeeded, the journal head stays locked and later has to be unlocked using |
| 111 | * 'release_head()'. 'write_node()' and 'write_head()' functions also unlock |
| 112 | * it. Returns zero in case of success, %-EAGAIN if commit has to be done, and |
| 113 | * other negative error codes in case of other failures. |
| 114 | */ |
| 115 | static int reserve_space(struct ubifs_info *c, int jhead, int len) |
| 116 | { |
| 117 | int err = 0, err1, retries = 0, avail, lnum, offs, free, squeeze; |
| 118 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
| 119 | |
| 120 | /* |
| 121 | * Typically, the base head has smaller nodes written to it, so it is |
| 122 | * better to try to allocate space at the ends of eraseblocks. This is |
| 123 | * what the squeeze parameter does. |
| 124 | */ |
| 125 | squeeze = (jhead == BASEHD); |
| 126 | again: |
| 127 | mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
| 128 | |
| 129 | if (c->ro_media) { |
| 130 | err = -EROFS; |
| 131 | goto out_unlock; |
| 132 | } |
| 133 | |
| 134 | avail = c->leb_size - wbuf->offs - wbuf->used; |
| 135 | if (wbuf->lnum != -1 && avail >= len) |
| 136 | return 0; |
| 137 | |
| 138 | /* |
| 139 | * Write buffer wasn't seek'ed or there is no enough space - look for an |
| 140 | * LEB with some empty space. |
| 141 | */ |
| 142 | lnum = ubifs_find_free_space(c, len, &free, squeeze); |
| 143 | if (lnum >= 0) { |
| 144 | /* Found an LEB, add it to the journal head */ |
| 145 | offs = c->leb_size - free; |
| 146 | err = ubifs_add_bud_to_log(c, jhead, lnum, offs); |
| 147 | if (err) |
| 148 | goto out_return; |
| 149 | /* A new bud was successfully allocated and added to the log */ |
| 150 | goto out; |
| 151 | } |
| 152 | |
| 153 | err = lnum; |
| 154 | if (err != -ENOSPC) |
| 155 | goto out_unlock; |
| 156 | |
| 157 | /* |
| 158 | * No free space, we have to run garbage collector to make |
| 159 | * some. But the write-buffer mutex has to be unlocked because |
| 160 | * GC also takes it. |
| 161 | */ |
| 162 | dbg_jnl("no free space jhead %d, run GC", jhead); |
| 163 | mutex_unlock(&wbuf->io_mutex); |
| 164 | |
| 165 | lnum = ubifs_garbage_collect(c, 0); |
| 166 | if (lnum < 0) { |
| 167 | err = lnum; |
| 168 | if (err != -ENOSPC) |
| 169 | return err; |
| 170 | |
| 171 | /* |
| 172 | * GC could not make a free LEB. But someone else may |
| 173 | * have allocated new bud for this journal head, |
| 174 | * because we dropped @wbuf->io_mutex, so try once |
| 175 | * again. |
| 176 | */ |
| 177 | dbg_jnl("GC couldn't make a free LEB for jhead %d", jhead); |
| 178 | if (retries++ < 2) { |
| 179 | dbg_jnl("retry (%d)", retries); |
| 180 | goto again; |
| 181 | } |
| 182 | |
| 183 | dbg_jnl("return -ENOSPC"); |
| 184 | return err; |
| 185 | } |
| 186 | |
| 187 | mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
| 188 | dbg_jnl("got LEB %d for jhead %d", lnum, jhead); |
| 189 | avail = c->leb_size - wbuf->offs - wbuf->used; |
| 190 | |
| 191 | if (wbuf->lnum != -1 && avail >= len) { |
| 192 | /* |
| 193 | * Someone else has switched the journal head and we have |
| 194 | * enough space now. This happens when more then one process is |
| 195 | * trying to write to the same journal head at the same time. |
| 196 | */ |
| 197 | dbg_jnl("return LEB %d back, already have LEB %d:%d", |
| 198 | lnum, wbuf->lnum, wbuf->offs + wbuf->used); |
| 199 | err = ubifs_return_leb(c, lnum); |
| 200 | if (err) |
| 201 | goto out_unlock; |
| 202 | return 0; |
| 203 | } |
| 204 | |
| 205 | err = ubifs_add_bud_to_log(c, jhead, lnum, 0); |
| 206 | if (err) |
| 207 | goto out_return; |
| 208 | offs = 0; |
| 209 | |
| 210 | out: |
| 211 | err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, UBI_SHORTTERM); |
| 212 | if (err) |
| 213 | goto out_unlock; |
| 214 | |
| 215 | return 0; |
| 216 | |
| 217 | out_unlock: |
| 218 | mutex_unlock(&wbuf->io_mutex); |
| 219 | return err; |
| 220 | |
| 221 | out_return: |
| 222 | /* An error occurred and the LEB has to be returned to lprops */ |
| 223 | ubifs_assert(err < 0); |
| 224 | err1 = ubifs_return_leb(c, lnum); |
| 225 | if (err1 && err == -EAGAIN) |
| 226 | /* |
| 227 | * Return original error code only if it is not %-EAGAIN, |
| 228 | * which is not really an error. Otherwise, return the error |
| 229 | * code of 'ubifs_return_leb()'. |
| 230 | */ |
| 231 | err = err1; |
| 232 | mutex_unlock(&wbuf->io_mutex); |
| 233 | return err; |
| 234 | } |
| 235 | |
| 236 | /** |
| 237 | * write_node - write node to a journal head. |
| 238 | * @c: UBIFS file-system description object |
| 239 | * @jhead: journal head |
| 240 | * @node: node to write |
| 241 | * @len: node length |
| 242 | * @lnum: LEB number written is returned here |
| 243 | * @offs: offset written is returned here |
| 244 | * |
| 245 | * This function writes a node to reserved space of journal head @jhead. |
| 246 | * Returns zero in case of success and a negative error code in case of |
| 247 | * failure. |
| 248 | */ |
| 249 | static int write_node(struct ubifs_info *c, int jhead, void *node, int len, |
| 250 | int *lnum, int *offs) |
| 251 | { |
| 252 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
| 253 | |
| 254 | ubifs_assert(jhead != GCHD); |
| 255 | |
| 256 | *lnum = c->jheads[jhead].wbuf.lnum; |
| 257 | *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; |
| 258 | |
| 259 | dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); |
| 260 | ubifs_prepare_node(c, node, len, 0); |
| 261 | |
| 262 | return ubifs_wbuf_write_nolock(wbuf, node, len); |
| 263 | } |
| 264 | |
| 265 | /** |
| 266 | * write_head - write data to a journal head. |
| 267 | * @c: UBIFS file-system description object |
| 268 | * @jhead: journal head |
| 269 | * @buf: buffer to write |
| 270 | * @len: length to write |
| 271 | * @lnum: LEB number written is returned here |
| 272 | * @offs: offset written is returned here |
| 273 | * @sync: non-zero if the write-buffer has to by synchronized |
| 274 | * |
| 275 | * This function is the same as 'write_node()' but it does not assume the |
| 276 | * buffer it is writing is a node, so it does not prepare it (which means |
| 277 | * initializing common header and calculating CRC). |
| 278 | */ |
| 279 | static int write_head(struct ubifs_info *c, int jhead, void *buf, int len, |
| 280 | int *lnum, int *offs, int sync) |
| 281 | { |
| 282 | int err; |
| 283 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
| 284 | |
| 285 | ubifs_assert(jhead != GCHD); |
| 286 | |
| 287 | *lnum = c->jheads[jhead].wbuf.lnum; |
| 288 | *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; |
| 289 | dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); |
| 290 | |
| 291 | err = ubifs_wbuf_write_nolock(wbuf, buf, len); |
| 292 | if (err) |
| 293 | return err; |
| 294 | if (sync) |
| 295 | err = ubifs_wbuf_sync_nolock(wbuf); |
| 296 | return err; |
| 297 | } |
| 298 | |
| 299 | /** |
| 300 | * make_reservation - reserve journal space. |
| 301 | * @c: UBIFS file-system description object |
| 302 | * @jhead: journal head |
| 303 | * @len: how many bytes to reserve |
| 304 | * |
| 305 | * This function makes space reservation in journal head @jhead. The function |
| 306 | * takes the commit lock and locks the journal head, and the caller has to |
| 307 | * unlock the head and finish the reservation with 'finish_reservation()'. |
| 308 | * Returns zero in case of success and a negative error code in case of |
| 309 | * failure. |
| 310 | * |
| 311 | * Note, the journal head may be unlocked as soon as the data is written, while |
| 312 | * the commit lock has to be released after the data has been added to the |
| 313 | * TNC. |
| 314 | */ |
| 315 | static int make_reservation(struct ubifs_info *c, int jhead, int len) |
| 316 | { |
| 317 | int err, cmt_retries = 0, nospc_retries = 0; |
| 318 | |
| 319 | again: |
| 320 | down_read(&c->commit_sem); |
| 321 | err = reserve_space(c, jhead, len); |
| 322 | if (!err) |
| 323 | return 0; |
| 324 | up_read(&c->commit_sem); |
| 325 | |
| 326 | if (err == -ENOSPC) { |
| 327 | /* |
| 328 | * GC could not make any progress. We should try to commit |
| 329 | * once because it could make some dirty space and GC would |
| 330 | * make progress, so make the error -EAGAIN so that the below |
| 331 | * will commit and re-try. |
| 332 | */ |
| 333 | if (nospc_retries++ < 2) { |
| 334 | dbg_jnl("no space, retry"); |
| 335 | err = -EAGAIN; |
| 336 | } |
| 337 | |
| 338 | /* |
| 339 | * This means that the budgeting is incorrect. We always have |
| 340 | * to be able to write to the media, because all operations are |
| 341 | * budgeted. Deletions are not budgeted, though, but we reserve |
| 342 | * an extra LEB for them. |
| 343 | */ |
| 344 | } |
| 345 | |
| 346 | if (err != -EAGAIN) |
| 347 | goto out; |
| 348 | |
| 349 | /* |
| 350 | * -EAGAIN means that the journal is full or too large, or the above |
| 351 | * code wants to do one commit. Do this and re-try. |
| 352 | */ |
| 353 | if (cmt_retries > 128) { |
| 354 | /* |
| 355 | * This should not happen unless the journal size limitations |
| 356 | * are too tough. |
| 357 | */ |
| 358 | ubifs_err("stuck in space allocation"); |
| 359 | err = -ENOSPC; |
| 360 | goto out; |
| 361 | } else if (cmt_retries > 32) |
| 362 | ubifs_warn("too many space allocation re-tries (%d)", |
| 363 | cmt_retries); |
| 364 | |
| 365 | dbg_jnl("-EAGAIN, commit and retry (retried %d times)", |
| 366 | cmt_retries); |
| 367 | cmt_retries += 1; |
| 368 | |
| 369 | err = ubifs_run_commit(c); |
| 370 | if (err) |
| 371 | return err; |
| 372 | goto again; |
| 373 | |
| 374 | out: |
| 375 | ubifs_err("cannot reserve %d bytes in jhead %d, error %d", |
| 376 | len, jhead, err); |
| 377 | if (err == -ENOSPC) { |
| 378 | /* This are some budgeting problems, print useful information */ |
| 379 | down_write(&c->commit_sem); |
| 380 | spin_lock(&c->space_lock); |
| 381 | dbg_dump_stack(); |
| 382 | dbg_dump_budg(c); |
| 383 | spin_unlock(&c->space_lock); |
| 384 | dbg_dump_lprops(c); |
| 385 | cmt_retries = dbg_check_lprops(c); |
| 386 | up_write(&c->commit_sem); |
| 387 | } |
| 388 | return err; |
| 389 | } |
| 390 | |
| 391 | /** |
| 392 | * release_head - release a journal head. |
| 393 | * @c: UBIFS file-system description object |
| 394 | * @jhead: journal head |
| 395 | * |
| 396 | * This function releases journal head @jhead which was locked by |
| 397 | * the 'make_reservation()' function. It has to be called after each successful |
| 398 | * 'make_reservation()' invocation. |
| 399 | */ |
| 400 | static inline void release_head(struct ubifs_info *c, int jhead) |
| 401 | { |
| 402 | mutex_unlock(&c->jheads[jhead].wbuf.io_mutex); |
| 403 | } |
| 404 | |
| 405 | /** |
| 406 | * finish_reservation - finish a reservation. |
| 407 | * @c: UBIFS file-system description object |
| 408 | * |
| 409 | * This function finishes journal space reservation. It must be called after |
| 410 | * 'make_reservation()'. |
| 411 | */ |
| 412 | static void finish_reservation(struct ubifs_info *c) |
| 413 | { |
| 414 | up_read(&c->commit_sem); |
| 415 | } |
| 416 | |
| 417 | /** |
| 418 | * get_dent_type - translate VFS inode mode to UBIFS directory entry type. |
| 419 | * @mode: inode mode |
| 420 | */ |
| 421 | static int get_dent_type(int mode) |
| 422 | { |
| 423 | switch (mode & S_IFMT) { |
| 424 | case S_IFREG: |
| 425 | return UBIFS_ITYPE_REG; |
| 426 | case S_IFDIR: |
| 427 | return UBIFS_ITYPE_DIR; |
| 428 | case S_IFLNK: |
| 429 | return UBIFS_ITYPE_LNK; |
| 430 | case S_IFBLK: |
| 431 | return UBIFS_ITYPE_BLK; |
| 432 | case S_IFCHR: |
| 433 | return UBIFS_ITYPE_CHR; |
| 434 | case S_IFIFO: |
| 435 | return UBIFS_ITYPE_FIFO; |
| 436 | case S_IFSOCK: |
| 437 | return UBIFS_ITYPE_SOCK; |
| 438 | default: |
| 439 | BUG(); |
| 440 | } |
| 441 | return 0; |
| 442 | } |
| 443 | |
| 444 | /** |
| 445 | * pack_inode - pack an inode node. |
| 446 | * @c: UBIFS file-system description object |
| 447 | * @ino: buffer in which to pack inode node |
| 448 | * @inode: inode to pack |
| 449 | * @last: indicates the last node of the group |
| 450 | * @last_reference: non-zero if this is a deletion inode |
| 451 | */ |
| 452 | static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino, |
| 453 | const struct inode *inode, int last, |
| 454 | int last_reference) |
| 455 | { |
| 456 | int data_len = 0; |
| 457 | struct ubifs_inode *ui = ubifs_inode(inode); |
| 458 | |
| 459 | ino->ch.node_type = UBIFS_INO_NODE; |
| 460 | ino_key_init_flash(c, &ino->key, inode->i_ino); |
| 461 | ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum); |
| 462 | ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec); |
| 463 | ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); |
| 464 | ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec); |
| 465 | ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); |
| 466 | ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec); |
| 467 | ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); |
| 468 | ino->uid = cpu_to_le32(inode->i_uid); |
| 469 | ino->gid = cpu_to_le32(inode->i_gid); |
| 470 | ino->mode = cpu_to_le32(inode->i_mode); |
| 471 | ino->flags = cpu_to_le32(ui->flags); |
| 472 | ino->size = cpu_to_le64(ui->ui_size); |
| 473 | ino->nlink = cpu_to_le32(inode->i_nlink); |
| 474 | ino->compr_type = cpu_to_le16(ui->compr_type); |
| 475 | ino->data_len = cpu_to_le32(ui->data_len); |
| 476 | ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt); |
| 477 | ino->xattr_size = cpu_to_le32(ui->xattr_size); |
| 478 | ino->xattr_names = cpu_to_le32(ui->xattr_names); |
| 479 | zero_ino_node_unused(ino); |
| 480 | |
| 481 | /* |
| 482 | * Drop the attached data if this is a deletion inode, the data is not |
| 483 | * needed anymore. |
| 484 | */ |
| 485 | if (!last_reference) { |
| 486 | memcpy(ino->data, ui->data, ui->data_len); |
| 487 | data_len = ui->data_len; |
| 488 | } |
| 489 | |
| 490 | ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last); |
| 491 | } |
| 492 | |
| 493 | /** |
| 494 | * mark_inode_clean - mark UBIFS inode as clean. |
| 495 | * @c: UBIFS file-system description object |
| 496 | * @ui: UBIFS inode to mark as clean |
| 497 | * |
| 498 | * This helper function marks UBIFS inode @ui as clean by cleaning the |
| 499 | * @ui->dirty flag and releasing its budget. Note, VFS may still treat the |
| 500 | * inode as dirty and try to write it back, but 'ubifs_write_inode()' would |
| 501 | * just do nothing. |
| 502 | */ |
| 503 | static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui) |
| 504 | { |
| 505 | if (ui->dirty) |
| 506 | ubifs_release_dirty_inode_budget(c, ui); |
| 507 | ui->dirty = 0; |
| 508 | } |
| 509 | |
| 510 | /** |
| 511 | * ubifs_jnl_update - update inode. |
| 512 | * @c: UBIFS file-system description object |
| 513 | * @dir: parent inode or host inode in case of extended attributes |
| 514 | * @nm: directory entry name |
| 515 | * @inode: inode to update |
| 516 | * @deletion: indicates a directory entry deletion i.e unlink or rmdir |
| 517 | * @xent: non-zero if the directory entry is an extended attribute entry |
| 518 | * |
| 519 | * This function updates an inode by writing a directory entry (or extended |
| 520 | * attribute entry), the inode itself, and the parent directory inode (or the |
| 521 | * host inode) to the journal. |
| 522 | * |
| 523 | * The function writes the host inode @dir last, which is important in case of |
| 524 | * extended attributes. Indeed, then we guarantee that if the host inode gets |
| 525 | * synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed, |
| 526 | * the extended attribute inode gets flushed too. And this is exactly what the |
| 527 | * user expects - synchronizing the host inode synchronizes its extended |
| 528 | * attributes. Similarly, this guarantees that if @dir is synchronized, its |
| 529 | * directory entry corresponding to @nm gets synchronized too. |
| 530 | * |
| 531 | * If the inode (@inode) or the parent directory (@dir) are synchronous, this |
| 532 | * function synchronizes the write-buffer. |
| 533 | * |
| 534 | * This function marks the @dir and @inode inodes as clean and returns zero on |
| 535 | * success. In case of failure, a negative error code is returned. |
| 536 | */ |
| 537 | int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, |
| 538 | const struct qstr *nm, const struct inode *inode, |
| 539 | int deletion, int xent) |
| 540 | { |
| 541 | int err, dlen, ilen, len, lnum, ino_offs, dent_offs; |
| 542 | int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir); |
| 543 | int last_reference = !!(deletion && inode->i_nlink == 0); |
| 544 | struct ubifs_inode *ui = ubifs_inode(inode); |
| 545 | struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| 546 | struct ubifs_dent_node *dent; |
| 547 | struct ubifs_ino_node *ino; |
| 548 | union ubifs_key dent_key, ino_key; |
| 549 | |
| 550 | dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu", |
| 551 | inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino); |
| 552 | ubifs_assert(dir_ui->data_len == 0); |
| 553 | ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex)); |
| 554 | |
| 555 | dlen = UBIFS_DENT_NODE_SZ + nm->len + 1; |
| 556 | ilen = UBIFS_INO_NODE_SZ; |
| 557 | |
| 558 | /* |
| 559 | * If the last reference to the inode is being deleted, then there is |
| 560 | * no need to attach and write inode data, it is being deleted anyway. |
| 561 | * And if the inode is being deleted, no need to synchronize |
| 562 | * write-buffer even if the inode is synchronous. |
| 563 | */ |
| 564 | if (!last_reference) { |
| 565 | ilen += ui->data_len; |
| 566 | sync |= IS_SYNC(inode); |
| 567 | } |
| 568 | |
| 569 | aligned_dlen = ALIGN(dlen, 8); |
| 570 | aligned_ilen = ALIGN(ilen, 8); |
| 571 | len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ; |
| 572 | dent = kmalloc(len, GFP_NOFS); |
| 573 | if (!dent) |
| 574 | return -ENOMEM; |
| 575 | |
| 576 | /* Make reservation before allocating sequence numbers */ |
| 577 | err = make_reservation(c, BASEHD, len); |
| 578 | if (err) |
| 579 | goto out_free; |
| 580 | |
| 581 | if (!xent) { |
| 582 | dent->ch.node_type = UBIFS_DENT_NODE; |
| 583 | dent_key_init(c, &dent_key, dir->i_ino, nm); |
| 584 | } else { |
| 585 | dent->ch.node_type = UBIFS_XENT_NODE; |
| 586 | xent_key_init(c, &dent_key, dir->i_ino, nm); |
| 587 | } |
| 588 | |
| 589 | key_write(c, &dent_key, dent->key); |
| 590 | dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino); |
| 591 | dent->type = get_dent_type(inode->i_mode); |
| 592 | dent->nlen = cpu_to_le16(nm->len); |
| 593 | memcpy(dent->name, nm->name, nm->len); |
| 594 | dent->name[nm->len] = '\0'; |
| 595 | zero_dent_node_unused(dent); |
| 596 | ubifs_prep_grp_node(c, dent, dlen, 0); |
| 597 | |
| 598 | ino = (void *)dent + aligned_dlen; |
| 599 | pack_inode(c, ino, inode, 0, last_reference); |
| 600 | ino = (void *)ino + aligned_ilen; |
| 601 | pack_inode(c, ino, dir, 1, 0); |
| 602 | |
| 603 | if (last_reference) { |
| 604 | err = ubifs_add_orphan(c, inode->i_ino); |
| 605 | if (err) { |
| 606 | release_head(c, BASEHD); |
| 607 | goto out_finish; |
| 608 | } |
| 609 | } |
| 610 | |
| 611 | err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync); |
| 612 | if (err) |
| 613 | goto out_release; |
| 614 | if (!sync) { |
| 615 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
| 616 | |
| 617 | ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); |
| 618 | ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino); |
| 619 | } |
| 620 | release_head(c, BASEHD); |
| 621 | kfree(dent); |
| 622 | |
| 623 | if (deletion) { |
| 624 | err = ubifs_tnc_remove_nm(c, &dent_key, nm); |
| 625 | if (err) |
| 626 | goto out_ro; |
| 627 | err = ubifs_add_dirt(c, lnum, dlen); |
| 628 | } else |
| 629 | err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm); |
| 630 | if (err) |
| 631 | goto out_ro; |
| 632 | |
| 633 | /* |
| 634 | * Note, we do not remove the inode from TNC even if the last reference |
| 635 | * to it has just been deleted, because the inode may still be opened. |
| 636 | * Instead, the inode has been added to orphan lists and the orphan |
| 637 | * subsystem will take further care about it. |
| 638 | */ |
| 639 | ino_key_init(c, &ino_key, inode->i_ino); |
| 640 | ino_offs = dent_offs + aligned_dlen; |
| 641 | err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen); |
| 642 | if (err) |
| 643 | goto out_ro; |
| 644 | |
| 645 | ino_key_init(c, &ino_key, dir->i_ino); |
| 646 | ino_offs += aligned_ilen; |
| 647 | err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ); |
| 648 | if (err) |
| 649 | goto out_ro; |
| 650 | |
| 651 | finish_reservation(c); |
| 652 | spin_lock(&ui->ui_lock); |
| 653 | ui->synced_i_size = ui->ui_size; |
| 654 | spin_unlock(&ui->ui_lock); |
| 655 | mark_inode_clean(c, ui); |
| 656 | mark_inode_clean(c, dir_ui); |
| 657 | return 0; |
| 658 | |
| 659 | out_finish: |
| 660 | finish_reservation(c); |
| 661 | out_free: |
| 662 | kfree(dent); |
| 663 | return err; |
| 664 | |
| 665 | out_release: |
| 666 | release_head(c, BASEHD); |
| 667 | out_ro: |
| 668 | ubifs_ro_mode(c, err); |
| 669 | if (last_reference) |
| 670 | ubifs_delete_orphan(c, inode->i_ino); |
| 671 | finish_reservation(c); |
| 672 | return err; |
| 673 | } |
| 674 | |
| 675 | /** |
| 676 | * ubifs_jnl_write_data - write a data node to the journal. |
| 677 | * @c: UBIFS file-system description object |
| 678 | * @inode: inode the data node belongs to |
| 679 | * @key: node key |
| 680 | * @buf: buffer to write |
| 681 | * @len: data length (must not exceed %UBIFS_BLOCK_SIZE) |
| 682 | * |
| 683 | * This function writes a data node to the journal. Returns %0 if the data node |
| 684 | * was successfully written, and a negative error code in case of failure. |
| 685 | */ |
| 686 | int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, |
| 687 | const union ubifs_key *key, const void *buf, int len) |
| 688 | { |
| 689 | struct ubifs_data_node *data; |
| 690 | int err, lnum, offs, compr_type, out_len; |
| 691 | int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR; |
| 692 | struct ubifs_inode *ui = ubifs_inode(inode); |
| 693 | |
| 694 | dbg_jnl("ino %lu, blk %u, len %d, key %s", key_inum(c, key), |
| 695 | key_block(c, key), len, DBGKEY(key)); |
| 696 | ubifs_assert(len <= UBIFS_BLOCK_SIZE); |
| 697 | |
| 698 | data = kmalloc(dlen, GFP_NOFS); |
| 699 | if (!data) |
| 700 | return -ENOMEM; |
| 701 | |
| 702 | data->ch.node_type = UBIFS_DATA_NODE; |
| 703 | key_write(c, key, &data->key); |
| 704 | data->size = cpu_to_le32(len); |
| 705 | zero_data_node_unused(data); |
| 706 | |
| 707 | if (!(ui->flags && UBIFS_COMPR_FL)) |
| 708 | /* Compression is disabled for this inode */ |
| 709 | compr_type = UBIFS_COMPR_NONE; |
| 710 | else |
| 711 | compr_type = ui->compr_type; |
| 712 | |
| 713 | out_len = dlen - UBIFS_DATA_NODE_SZ; |
| 714 | ubifs_compress(buf, len, &data->data, &out_len, &compr_type); |
| 715 | ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); |
| 716 | |
| 717 | dlen = UBIFS_DATA_NODE_SZ + out_len; |
| 718 | data->compr_type = cpu_to_le16(compr_type); |
| 719 | |
| 720 | /* Make reservation before allocating sequence numbers */ |
| 721 | err = make_reservation(c, DATAHD, dlen); |
| 722 | if (err) |
| 723 | goto out_free; |
| 724 | |
| 725 | err = write_node(c, DATAHD, data, dlen, &lnum, &offs); |
| 726 | if (err) |
| 727 | goto out_release; |
| 728 | ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key)); |
| 729 | release_head(c, DATAHD); |
| 730 | |
| 731 | err = ubifs_tnc_add(c, key, lnum, offs, dlen); |
| 732 | if (err) |
| 733 | goto out_ro; |
| 734 | |
| 735 | finish_reservation(c); |
| 736 | kfree(data); |
| 737 | return 0; |
| 738 | |
| 739 | out_release: |
| 740 | release_head(c, DATAHD); |
| 741 | out_ro: |
| 742 | ubifs_ro_mode(c, err); |
| 743 | finish_reservation(c); |
| 744 | out_free: |
| 745 | kfree(data); |
| 746 | return err; |
| 747 | } |
| 748 | |
| 749 | /** |
| 750 | * ubifs_jnl_write_inode - flush inode to the journal. |
| 751 | * @c: UBIFS file-system description object |
| 752 | * @inode: inode to flush |
| 753 | * @deletion: inode has been deleted |
| 754 | * |
| 755 | * This function writes inode @inode to the journal. If the inode is |
| 756 | * synchronous, it also synchronizes the write-buffer. Returns zero in case of |
| 757 | * success and a negative error code in case of failure. |
| 758 | */ |
| 759 | int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, |
| 760 | int deletion) |
| 761 | { |
| 762 | int err, len, lnum, offs, sync = 0; |
| 763 | struct ubifs_ino_node *ino; |
| 764 | struct ubifs_inode *ui = ubifs_inode(inode); |
| 765 | |
| 766 | dbg_jnl("ino %lu%s", inode->i_ino, |
| 767 | deletion ? " (last reference)" : ""); |
| 768 | if (deletion) |
| 769 | ubifs_assert(inode->i_nlink == 0); |
| 770 | |
| 771 | len = UBIFS_INO_NODE_SZ; |
| 772 | /* |
| 773 | * If the inode is being deleted, do not write the attached data. No |
| 774 | * need to synchronize the write-buffer either. |
| 775 | */ |
| 776 | if (!deletion) { |
| 777 | len += ui->data_len; |
| 778 | sync = IS_SYNC(inode); |
| 779 | } |
| 780 | ino = kmalloc(len, GFP_NOFS); |
| 781 | if (!ino) |
| 782 | return -ENOMEM; |
| 783 | |
| 784 | /* Make reservation before allocating sequence numbers */ |
| 785 | err = make_reservation(c, BASEHD, len); |
| 786 | if (err) |
| 787 | goto out_free; |
| 788 | |
| 789 | pack_inode(c, ino, inode, 1, deletion); |
| 790 | err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); |
| 791 | if (err) |
| 792 | goto out_release; |
| 793 | if (!sync) |
| 794 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, |
| 795 | inode->i_ino); |
| 796 | release_head(c, BASEHD); |
| 797 | |
| 798 | if (deletion) { |
| 799 | err = ubifs_tnc_remove_ino(c, inode->i_ino); |
| 800 | if (err) |
| 801 | goto out_ro; |
| 802 | ubifs_delete_orphan(c, inode->i_ino); |
| 803 | err = ubifs_add_dirt(c, lnum, len); |
| 804 | } else { |
| 805 | union ubifs_key key; |
| 806 | |
| 807 | ino_key_init(c, &key, inode->i_ino); |
| 808 | err = ubifs_tnc_add(c, &key, lnum, offs, len); |
| 809 | } |
| 810 | if (err) |
| 811 | goto out_ro; |
| 812 | |
| 813 | finish_reservation(c); |
| 814 | spin_lock(&ui->ui_lock); |
| 815 | ui->synced_i_size = ui->ui_size; |
| 816 | spin_unlock(&ui->ui_lock); |
| 817 | kfree(ino); |
| 818 | return 0; |
| 819 | |
| 820 | out_release: |
| 821 | release_head(c, BASEHD); |
| 822 | out_ro: |
| 823 | ubifs_ro_mode(c, err); |
| 824 | finish_reservation(c); |
| 825 | out_free: |
| 826 | kfree(ino); |
| 827 | return err; |
| 828 | } |
| 829 | |
| 830 | /** |
| 831 | * ubifs_jnl_rename - rename a directory entry. |
| 832 | * @c: UBIFS file-system description object |
| 833 | * @old_dir: parent inode of directory entry to rename |
| 834 | * @old_dentry: directory entry to rename |
| 835 | * @new_dir: parent inode of directory entry to rename |
| 836 | * @new_dentry: new directory entry (or directory entry to replace) |
| 837 | * @sync: non-zero if the write-buffer has to be synchronized |
| 838 | * |
| 839 | * This function implements the re-name operation which may involve writing up |
| 840 | * to 3 inodes and 2 directory entries. It marks the written inodes as clean |
| 841 | * and returns zero on success. In case of failure, a negative error code is |
| 842 | * returned. |
| 843 | */ |
| 844 | int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, |
| 845 | const struct dentry *old_dentry, |
| 846 | const struct inode *new_dir, |
| 847 | const struct dentry *new_dentry, int sync) |
| 848 | { |
| 849 | void *p; |
| 850 | union ubifs_key key; |
| 851 | struct ubifs_dent_node *dent, *dent2; |
| 852 | int err, dlen1, dlen2, ilen, lnum, offs, len; |
| 853 | const struct inode *old_inode = old_dentry->d_inode; |
| 854 | const struct inode *new_inode = new_dentry->d_inode; |
| 855 | int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ; |
| 856 | int last_reference = !!(new_inode && new_inode->i_nlink == 0); |
| 857 | int move = (old_dir != new_dir); |
| 858 | struct ubifs_inode *uninitialized_var(new_ui); |
| 859 | |
| 860 | dbg_jnl("dent '%.*s' in dir ino %lu to dent '%.*s' in dir ino %lu", |
| 861 | old_dentry->d_name.len, old_dentry->d_name.name, |
| 862 | old_dir->i_ino, new_dentry->d_name.len, |
| 863 | new_dentry->d_name.name, new_dir->i_ino); |
| 864 | ubifs_assert(ubifs_inode(old_dir)->data_len == 0); |
| 865 | ubifs_assert(ubifs_inode(new_dir)->data_len == 0); |
| 866 | ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex)); |
| 867 | ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex)); |
| 868 | |
| 869 | dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1; |
| 870 | dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1; |
| 871 | if (new_inode) { |
| 872 | new_ui = ubifs_inode(new_inode); |
| 873 | ubifs_assert(mutex_is_locked(&new_ui->ui_mutex)); |
| 874 | ilen = UBIFS_INO_NODE_SZ; |
| 875 | if (!last_reference) |
| 876 | ilen += new_ui->data_len; |
| 877 | } else |
| 878 | ilen = 0; |
| 879 | |
| 880 | aligned_dlen1 = ALIGN(dlen1, 8); |
| 881 | aligned_dlen2 = ALIGN(dlen2, 8); |
| 882 | len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8); |
| 883 | if (old_dir != new_dir) |
| 884 | len += plen; |
| 885 | dent = kmalloc(len, GFP_NOFS); |
| 886 | if (!dent) |
| 887 | return -ENOMEM; |
| 888 | |
| 889 | /* Make reservation before allocating sequence numbers */ |
| 890 | err = make_reservation(c, BASEHD, len); |
| 891 | if (err) |
| 892 | goto out_free; |
| 893 | |
| 894 | /* Make new dent */ |
| 895 | dent->ch.node_type = UBIFS_DENT_NODE; |
| 896 | dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name); |
| 897 | dent->inum = cpu_to_le64(old_inode->i_ino); |
| 898 | dent->type = get_dent_type(old_inode->i_mode); |
| 899 | dent->nlen = cpu_to_le16(new_dentry->d_name.len); |
| 900 | memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len); |
| 901 | dent->name[new_dentry->d_name.len] = '\0'; |
| 902 | zero_dent_node_unused(dent); |
| 903 | ubifs_prep_grp_node(c, dent, dlen1, 0); |
| 904 | |
| 905 | /* Make deletion dent */ |
| 906 | dent2 = (void *)dent + aligned_dlen1; |
| 907 | dent2->ch.node_type = UBIFS_DENT_NODE; |
| 908 | dent_key_init_flash(c, &dent2->key, old_dir->i_ino, |
| 909 | &old_dentry->d_name); |
| 910 | dent2->inum = 0; |
| 911 | dent2->type = DT_UNKNOWN; |
| 912 | dent2->nlen = cpu_to_le16(old_dentry->d_name.len); |
| 913 | memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len); |
| 914 | dent2->name[old_dentry->d_name.len] = '\0'; |
| 915 | zero_dent_node_unused(dent2); |
| 916 | ubifs_prep_grp_node(c, dent2, dlen2, 0); |
| 917 | |
| 918 | p = (void *)dent2 + aligned_dlen2; |
| 919 | if (new_inode) { |
| 920 | pack_inode(c, p, new_inode, 0, last_reference); |
| 921 | p += ALIGN(ilen, 8); |
| 922 | } |
| 923 | |
| 924 | if (!move) |
| 925 | pack_inode(c, p, old_dir, 1, 0); |
| 926 | else { |
| 927 | pack_inode(c, p, old_dir, 0, 0); |
| 928 | p += ALIGN(plen, 8); |
| 929 | pack_inode(c, p, new_dir, 1, 0); |
| 930 | } |
| 931 | |
| 932 | if (last_reference) { |
| 933 | err = ubifs_add_orphan(c, new_inode->i_ino); |
| 934 | if (err) { |
| 935 | release_head(c, BASEHD); |
| 936 | goto out_finish; |
| 937 | } |
| 938 | } |
| 939 | |
| 940 | err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync); |
| 941 | if (err) |
| 942 | goto out_release; |
| 943 | if (!sync) { |
| 944 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
| 945 | |
| 946 | ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino); |
| 947 | ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino); |
| 948 | if (new_inode) |
| 949 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, |
| 950 | new_inode->i_ino); |
| 951 | } |
| 952 | release_head(c, BASEHD); |
| 953 | |
| 954 | dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name); |
| 955 | err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name); |
| 956 | if (err) |
| 957 | goto out_ro; |
| 958 | |
| 959 | err = ubifs_add_dirt(c, lnum, dlen2); |
| 960 | if (err) |
| 961 | goto out_ro; |
| 962 | |
| 963 | dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); |
| 964 | err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); |
| 965 | if (err) |
| 966 | goto out_ro; |
| 967 | |
| 968 | offs += aligned_dlen1 + aligned_dlen2; |
| 969 | if (new_inode) { |
| 970 | ino_key_init(c, &key, new_inode->i_ino); |
| 971 | err = ubifs_tnc_add(c, &key, lnum, offs, ilen); |
| 972 | if (err) |
| 973 | goto out_ro; |
| 974 | offs += ALIGN(ilen, 8); |
| 975 | } |
| 976 | |
| 977 | ino_key_init(c, &key, old_dir->i_ino); |
| 978 | err = ubifs_tnc_add(c, &key, lnum, offs, plen); |
| 979 | if (err) |
| 980 | goto out_ro; |
| 981 | |
| 982 | if (old_dir != new_dir) { |
| 983 | offs += ALIGN(plen, 8); |
| 984 | ino_key_init(c, &key, new_dir->i_ino); |
| 985 | err = ubifs_tnc_add(c, &key, lnum, offs, plen); |
| 986 | if (err) |
| 987 | goto out_ro; |
| 988 | } |
| 989 | |
| 990 | finish_reservation(c); |
| 991 | if (new_inode) { |
| 992 | mark_inode_clean(c, new_ui); |
| 993 | spin_lock(&new_ui->ui_lock); |
| 994 | new_ui->synced_i_size = new_ui->ui_size; |
| 995 | spin_unlock(&new_ui->ui_lock); |
| 996 | } |
| 997 | mark_inode_clean(c, ubifs_inode(old_dir)); |
| 998 | if (move) |
| 999 | mark_inode_clean(c, ubifs_inode(new_dir)); |
| 1000 | kfree(dent); |
| 1001 | return 0; |
| 1002 | |
| 1003 | out_release: |
| 1004 | release_head(c, BASEHD); |
| 1005 | out_ro: |
| 1006 | ubifs_ro_mode(c, err); |
| 1007 | if (last_reference) |
| 1008 | ubifs_delete_orphan(c, new_inode->i_ino); |
| 1009 | out_finish: |
| 1010 | finish_reservation(c); |
| 1011 | out_free: |
| 1012 | kfree(dent); |
| 1013 | return err; |
| 1014 | } |
| 1015 | |
| 1016 | /** |
| 1017 | * recomp_data_node - re-compress a truncated data node. |
| 1018 | * @dn: data node to re-compress |
| 1019 | * @new_len: new length |
| 1020 | * |
| 1021 | * This function is used when an inode is truncated and the last data node of |
| 1022 | * the inode has to be re-compressed and re-written. |
| 1023 | */ |
| 1024 | static int recomp_data_node(struct ubifs_data_node *dn, int *new_len) |
| 1025 | { |
| 1026 | void *buf; |
| 1027 | int err, len, compr_type, out_len; |
| 1028 | |
| 1029 | out_len = le32_to_cpu(dn->size); |
| 1030 | buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS); |
| 1031 | if (!buf) |
| 1032 | return -ENOMEM; |
| 1033 | |
| 1034 | len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; |
| 1035 | compr_type = le16_to_cpu(dn->compr_type); |
| 1036 | err = ubifs_decompress(&dn->data, len, buf, &out_len, compr_type); |
| 1037 | if (err) |
| 1038 | goto out; |
| 1039 | |
| 1040 | ubifs_compress(buf, *new_len, &dn->data, &out_len, &compr_type); |
| 1041 | ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); |
| 1042 | dn->compr_type = cpu_to_le16(compr_type); |
| 1043 | dn->size = cpu_to_le32(*new_len); |
| 1044 | *new_len = UBIFS_DATA_NODE_SZ + out_len; |
| 1045 | out: |
| 1046 | kfree(buf); |
| 1047 | return err; |
| 1048 | } |
| 1049 | |
| 1050 | /** |
| 1051 | * ubifs_jnl_truncate - update the journal for a truncation. |
| 1052 | * @c: UBIFS file-system description object |
| 1053 | * @inode: inode to truncate |
| 1054 | * @old_size: old size |
| 1055 | * @new_size: new size |
| 1056 | * |
| 1057 | * When the size of a file decreases due to truncation, a truncation node is |
| 1058 | * written, the journal tree is updated, and the last data block is re-written |
| 1059 | * if it has been affected. The inode is also updated in order to synchronize |
| 1060 | * the new inode size. |
| 1061 | * |
| 1062 | * This function marks the inode as clean and returns zero on success. In case |
| 1063 | * of failure, a negative error code is returned. |
| 1064 | */ |
| 1065 | int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, |
| 1066 | loff_t old_size, loff_t new_size) |
| 1067 | { |
| 1068 | union ubifs_key key, to_key; |
| 1069 | struct ubifs_ino_node *ino; |
| 1070 | struct ubifs_trun_node *trun; |
| 1071 | struct ubifs_data_node *uninitialized_var(dn); |
| 1072 | int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode); |
| 1073 | struct ubifs_inode *ui = ubifs_inode(inode); |
| 1074 | ino_t inum = inode->i_ino; |
| 1075 | unsigned int blk; |
| 1076 | |
| 1077 | dbg_jnl("ino %lu, size %lld -> %lld", inum, old_size, new_size); |
| 1078 | ubifs_assert(!ui->data_len); |
| 1079 | ubifs_assert(S_ISREG(inode->i_mode)); |
| 1080 | ubifs_assert(mutex_is_locked(&ui->ui_mutex)); |
| 1081 | |
| 1082 | sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ + |
| 1083 | UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR; |
| 1084 | ino = kmalloc(sz, GFP_NOFS); |
| 1085 | if (!ino) |
| 1086 | return -ENOMEM; |
| 1087 | |
| 1088 | trun = (void *)ino + UBIFS_INO_NODE_SZ; |
| 1089 | trun->ch.node_type = UBIFS_TRUN_NODE; |
| 1090 | trun->inum = cpu_to_le32(inum); |
| 1091 | trun->old_size = cpu_to_le64(old_size); |
| 1092 | trun->new_size = cpu_to_le64(new_size); |
| 1093 | zero_trun_node_unused(trun); |
| 1094 | |
| 1095 | dlen = new_size & (UBIFS_BLOCK_SIZE - 1); |
| 1096 | if (dlen) { |
| 1097 | /* Get last data block so it can be truncated */ |
| 1098 | dn = (void *)trun + UBIFS_TRUN_NODE_SZ; |
| 1099 | blk = new_size >> UBIFS_BLOCK_SHIFT; |
| 1100 | data_key_init(c, &key, inum, blk); |
| 1101 | dbg_jnl("last block key %s", DBGKEY(&key)); |
| 1102 | err = ubifs_tnc_lookup(c, &key, dn); |
| 1103 | if (err == -ENOENT) |
| 1104 | dlen = 0; /* Not found (so it is a hole) */ |
| 1105 | else if (err) |
| 1106 | goto out_free; |
| 1107 | else { |
| 1108 | if (le32_to_cpu(dn->size) <= dlen) |
| 1109 | dlen = 0; /* Nothing to do */ |
| 1110 | else { |
| 1111 | int compr_type = le16_to_cpu(dn->compr_type); |
| 1112 | |
| 1113 | if (compr_type != UBIFS_COMPR_NONE) { |
| 1114 | err = recomp_data_node(dn, &dlen); |
| 1115 | if (err) |
| 1116 | goto out_free; |
| 1117 | } else { |
| 1118 | dn->size = cpu_to_le32(dlen); |
| 1119 | dlen += UBIFS_DATA_NODE_SZ; |
| 1120 | } |
| 1121 | zero_data_node_unused(dn); |
| 1122 | } |
| 1123 | } |
| 1124 | } |
| 1125 | |
| 1126 | /* Must make reservation before allocating sequence numbers */ |
| 1127 | len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ; |
| 1128 | if (dlen) |
| 1129 | len += dlen; |
| 1130 | err = make_reservation(c, BASEHD, len); |
| 1131 | if (err) |
| 1132 | goto out_free; |
| 1133 | |
| 1134 | pack_inode(c, ino, inode, 0, 0); |
| 1135 | ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1); |
| 1136 | if (dlen) |
| 1137 | ubifs_prep_grp_node(c, dn, dlen, 1); |
| 1138 | |
| 1139 | err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); |
| 1140 | if (err) |
| 1141 | goto out_release; |
| 1142 | if (!sync) |
| 1143 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum); |
| 1144 | release_head(c, BASEHD); |
| 1145 | |
| 1146 | if (dlen) { |
| 1147 | sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ; |
| 1148 | err = ubifs_tnc_add(c, &key, lnum, sz, dlen); |
| 1149 | if (err) |
| 1150 | goto out_ro; |
| 1151 | } |
| 1152 | |
| 1153 | ino_key_init(c, &key, inum); |
| 1154 | err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ); |
| 1155 | if (err) |
| 1156 | goto out_ro; |
| 1157 | |
| 1158 | err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ); |
| 1159 | if (err) |
| 1160 | goto out_ro; |
| 1161 | |
| 1162 | bit = new_size & (UBIFS_BLOCK_SIZE - 1); |
| 1163 | blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0); |
| 1164 | data_key_init(c, &key, inum, blk); |
| 1165 | |
| 1166 | bit = old_size & (UBIFS_BLOCK_SIZE - 1); |
| 1167 | blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0: 1); |
| 1168 | data_key_init(c, &to_key, inum, blk); |
| 1169 | |
| 1170 | err = ubifs_tnc_remove_range(c, &key, &to_key); |
| 1171 | if (err) |
| 1172 | goto out_ro; |
| 1173 | |
| 1174 | finish_reservation(c); |
| 1175 | spin_lock(&ui->ui_lock); |
| 1176 | ui->synced_i_size = ui->ui_size; |
| 1177 | spin_unlock(&ui->ui_lock); |
| 1178 | mark_inode_clean(c, ui); |
| 1179 | kfree(ino); |
| 1180 | return 0; |
| 1181 | |
| 1182 | out_release: |
| 1183 | release_head(c, BASEHD); |
| 1184 | out_ro: |
| 1185 | ubifs_ro_mode(c, err); |
| 1186 | finish_reservation(c); |
| 1187 | out_free: |
| 1188 | kfree(ino); |
| 1189 | return err; |
| 1190 | } |
| 1191 | |
| 1192 | #ifdef CONFIG_UBIFS_FS_XATTR |
| 1193 | |
| 1194 | /** |
| 1195 | * ubifs_jnl_delete_xattr - delete an extended attribute. |
| 1196 | * @c: UBIFS file-system description object |
| 1197 | * @host: host inode |
| 1198 | * @inode: extended attribute inode |
| 1199 | * @nm: extended attribute entry name |
| 1200 | * |
| 1201 | * This function delete an extended attribute which is very similar to |
| 1202 | * un-linking regular files - it writes a deletion xentry, a deletion inode and |
| 1203 | * updates the target inode. Returns zero in case of success and a negative |
| 1204 | * error code in case of failure. |
| 1205 | */ |
| 1206 | int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, |
| 1207 | const struct inode *inode, const struct qstr *nm) |
| 1208 | { |
| 1209 | int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen; |
| 1210 | struct ubifs_dent_node *xent; |
| 1211 | struct ubifs_ino_node *ino; |
| 1212 | union ubifs_key xent_key, key1, key2; |
| 1213 | int sync = IS_DIRSYNC(host); |
| 1214 | struct ubifs_inode *host_ui = ubifs_inode(host); |
| 1215 | |
| 1216 | dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d", |
| 1217 | host->i_ino, inode->i_ino, nm->name, |
| 1218 | ubifs_inode(inode)->data_len); |
| 1219 | ubifs_assert(inode->i_nlink == 0); |
| 1220 | ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); |
| 1221 | |
| 1222 | /* |
| 1223 | * Since we are deleting the inode, we do not bother to attach any data |
| 1224 | * to it and assume its length is %UBIFS_INO_NODE_SZ. |
| 1225 | */ |
| 1226 | xlen = UBIFS_DENT_NODE_SZ + nm->len + 1; |
| 1227 | aligned_xlen = ALIGN(xlen, 8); |
| 1228 | hlen = host_ui->data_len + UBIFS_INO_NODE_SZ; |
| 1229 | len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8); |
| 1230 | |
| 1231 | xent = kmalloc(len, GFP_NOFS); |
| 1232 | if (!xent) |
| 1233 | return -ENOMEM; |
| 1234 | |
| 1235 | /* Make reservation before allocating sequence numbers */ |
| 1236 | err = make_reservation(c, BASEHD, len); |
| 1237 | if (err) { |
| 1238 | kfree(xent); |
| 1239 | return err; |
| 1240 | } |
| 1241 | |
| 1242 | xent->ch.node_type = UBIFS_XENT_NODE; |
| 1243 | xent_key_init(c, &xent_key, host->i_ino, nm); |
| 1244 | key_write(c, &xent_key, xent->key); |
| 1245 | xent->inum = 0; |
| 1246 | xent->type = get_dent_type(inode->i_mode); |
| 1247 | xent->nlen = cpu_to_le16(nm->len); |
| 1248 | memcpy(xent->name, nm->name, nm->len); |
| 1249 | xent->name[nm->len] = '\0'; |
| 1250 | zero_dent_node_unused(xent); |
| 1251 | ubifs_prep_grp_node(c, xent, xlen, 0); |
| 1252 | |
| 1253 | ino = (void *)xent + aligned_xlen; |
| 1254 | pack_inode(c, ino, inode, 0, 1); |
| 1255 | ino = (void *)ino + UBIFS_INO_NODE_SZ; |
| 1256 | pack_inode(c, ino, host, 1, 0); |
| 1257 | |
| 1258 | err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync); |
| 1259 | if (!sync && !err) |
| 1260 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino); |
| 1261 | release_head(c, BASEHD); |
| 1262 | kfree(xent); |
| 1263 | if (err) |
| 1264 | goto out_ro; |
| 1265 | |
| 1266 | /* Remove the extended attribute entry from TNC */ |
| 1267 | err = ubifs_tnc_remove_nm(c, &xent_key, nm); |
| 1268 | if (err) |
| 1269 | goto out_ro; |
| 1270 | err = ubifs_add_dirt(c, lnum, xlen); |
| 1271 | if (err) |
| 1272 | goto out_ro; |
| 1273 | |
| 1274 | /* |
| 1275 | * Remove all nodes belonging to the extended attribute inode from TNC. |
| 1276 | * Well, there actually must be only one node - the inode itself. |
| 1277 | */ |
| 1278 | lowest_ino_key(c, &key1, inode->i_ino); |
| 1279 | highest_ino_key(c, &key2, inode->i_ino); |
| 1280 | err = ubifs_tnc_remove_range(c, &key1, &key2); |
| 1281 | if (err) |
| 1282 | goto out_ro; |
| 1283 | err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ); |
| 1284 | if (err) |
| 1285 | goto out_ro; |
| 1286 | |
| 1287 | /* And update TNC with the new host inode position */ |
| 1288 | ino_key_init(c, &key1, host->i_ino); |
| 1289 | err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen); |
| 1290 | if (err) |
| 1291 | goto out_ro; |
| 1292 | |
| 1293 | finish_reservation(c); |
| 1294 | spin_lock(&host_ui->ui_lock); |
| 1295 | host_ui->synced_i_size = host_ui->ui_size; |
| 1296 | spin_unlock(&host_ui->ui_lock); |
| 1297 | mark_inode_clean(c, host_ui); |
| 1298 | return 0; |
| 1299 | |
| 1300 | out_ro: |
| 1301 | ubifs_ro_mode(c, err); |
| 1302 | finish_reservation(c); |
| 1303 | return err; |
| 1304 | } |
| 1305 | |
| 1306 | /** |
| 1307 | * ubifs_jnl_change_xattr - change an extended attribute. |
| 1308 | * @c: UBIFS file-system description object |
| 1309 | * @inode: extended attribute inode |
| 1310 | * @host: host inode |
| 1311 | * |
| 1312 | * This function writes the updated version of an extended attribute inode and |
| 1313 | * the host inode tho the journal (to the base head). The host inode is written |
| 1314 | * after the extended attribute inode in order to guarantee that the extended |
| 1315 | * attribute will be flushed when the inode is synchronized by 'fsync()' and |
| 1316 | * consequently, the write-buffer is synchronized. This function returns zero |
| 1317 | * in case of success and a negative error code in case of failure. |
| 1318 | */ |
| 1319 | int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, |
| 1320 | const struct inode *host) |
| 1321 | { |
| 1322 | int err, len1, len2, aligned_len, aligned_len1, lnum, offs; |
| 1323 | struct ubifs_inode *host_ui = ubifs_inode(inode); |
| 1324 | struct ubifs_ino_node *ino; |
| 1325 | union ubifs_key key; |
| 1326 | int sync = IS_DIRSYNC(host); |
| 1327 | |
| 1328 | dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino); |
| 1329 | ubifs_assert(host->i_nlink > 0); |
| 1330 | ubifs_assert(inode->i_nlink > 0); |
| 1331 | ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); |
| 1332 | |
| 1333 | len1 = UBIFS_INO_NODE_SZ + host_ui->data_len; |
| 1334 | len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len; |
| 1335 | aligned_len1 = ALIGN(len1, 8); |
| 1336 | aligned_len = aligned_len1 + ALIGN(len2, 8); |
| 1337 | |
| 1338 | ino = kmalloc(aligned_len, GFP_NOFS); |
| 1339 | if (!ino) |
| 1340 | return -ENOMEM; |
| 1341 | |
| 1342 | /* Make reservation before allocating sequence numbers */ |
| 1343 | err = make_reservation(c, BASEHD, aligned_len); |
| 1344 | if (err) |
| 1345 | goto out_free; |
| 1346 | |
| 1347 | pack_inode(c, ino, host, 0, 0); |
| 1348 | pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0); |
| 1349 | |
| 1350 | err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0); |
| 1351 | if (!sync && !err) { |
| 1352 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
| 1353 | |
| 1354 | ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino); |
| 1355 | ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); |
| 1356 | } |
| 1357 | release_head(c, BASEHD); |
| 1358 | if (err) |
| 1359 | goto out_ro; |
| 1360 | |
| 1361 | ino_key_init(c, &key, host->i_ino); |
| 1362 | err = ubifs_tnc_add(c, &key, lnum, offs, len1); |
| 1363 | if (err) |
| 1364 | goto out_ro; |
| 1365 | |
| 1366 | ino_key_init(c, &key, inode->i_ino); |
| 1367 | err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2); |
| 1368 | if (err) |
| 1369 | goto out_ro; |
| 1370 | |
| 1371 | finish_reservation(c); |
| 1372 | spin_lock(&host_ui->ui_lock); |
| 1373 | host_ui->synced_i_size = host_ui->ui_size; |
| 1374 | spin_unlock(&host_ui->ui_lock); |
| 1375 | mark_inode_clean(c, host_ui); |
| 1376 | kfree(ino); |
| 1377 | return 0; |
| 1378 | |
| 1379 | out_ro: |
| 1380 | ubifs_ro_mode(c, err); |
| 1381 | finish_reservation(c); |
| 1382 | out_free: |
| 1383 | kfree(ino); |
| 1384 | return err; |
| 1385 | } |
| 1386 | |
| 1387 | #endif /* CONFIG_UBIFS_FS_XATTR */ |