| #include <dt-bindings/regulator/qcom,rpm-smd-regulator.h> |
| |
| &rpm_bus { |
| /* PMD9650 S1 = VDD_MSS supply */ |
| rpm-regulator-smpa1 { |
| status = "okay"; |
| S1A: pmd9650_s1: regulator-s1 { |
| regulator-name = "pmd9650_s1"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| qcom,init-voltage = <800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa2 { |
| status = "okay"; |
| S2A: pmd9650_s2: regulator-s2 { |
| regulator-name = "pmd9650_s2"; |
| regulator-min-microvolt = <1256000>; |
| regulator-max-microvolt = <1256000>; |
| qcom,init-voltage = <1256000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa3 { |
| status = "okay"; |
| S3A: pmd9650_s3: regulator-s3 { |
| regulator-name = "pmd9650_s3"; |
| regulator-min-microvolt = <1024000>; |
| regulator-max-microvolt = <1024000>; |
| qcom,init-voltage = <1024000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa4 { |
| status = "okay"; |
| S4A: pmd9650_s4: regulator-s4 { |
| regulator-name = "pmd9650_s4"; |
| regulator-min-microvolt = <1856000>; |
| regulator-max-microvolt = <1856000>; |
| qcom,init-voltage = <1856000>; |
| status = "okay"; |
| }; |
| }; |
| |
| /* PMD9650 S5 = VDD_CX supply */ |
| rpm-regulator-smpa5 { |
| status = "okay"; |
| proxy-supply = <&VDD_CX_LEVEL>; |
| VDD_CX_LEVEL: |
| S5A_LEVEL: pmd9650_s5_level: regulator-s5-level { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "pmd9650_s5_level"; |
| qcom,set = <3>; |
| regulator-min-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,init-voltage-level = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-voltage =<RPM_SMD_REGULATOR_LEVEL_TURBO |
| RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,use-voltage-level; |
| }; |
| |
| VDD_CX_LEVEL_AO: |
| S5A_LEVEL_AO: |
| pmd9650_s5_level_ao: regulator-s5-level-ao { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "pmd9650_s5_level_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,use-voltage-level; |
| }; |
| |
| VDD_CX_FLOOR_LEVEL: |
| S5A_FLOOR_LEVEL: |
| pmd9650_s5_floor_level: regulator-s5-floor-level { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "pmd9650_s5_floor_level"; |
| qcom,set = <3>; |
| regulator-min-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,use-voltage-floor-level; |
| }; |
| |
| cx_cdev: cx-cdev { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&pmd9650_s5_floor_level>; |
| regulator-levels = <RPM_SMD_REGULATOR_LEVEL_RETENTION |
| RPM_SMD_REGULATOR_LEVEL_NOM>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpm-regulator-ldoa1 { |
| status = "okay"; |
| L1A: pmd9650_l1: regulator-l1 { |
| regulator-name = "pmd9650_l1"; |
| regulator-min-microvolt = <1224000>; |
| regulator-max-microvolt = <1224000>; |
| qcom,init-voltage = <1224000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa2 { |
| status = "okay"; |
| L2A: pmd9650_l2: regulator-l2 { |
| regulator-name = "pmd9650_l2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa3 { |
| status = "okay"; |
| L3A: pmd9650_l3: regulator-l3 { |
| regulator-name = "pmd9650_l3"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <1000000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa4 { |
| status = "okay"; |
| L4A: pmd9650_l4: regulator-l4 { |
| regulator-name = "pmd9650_l4"; |
| regulator-min-microvolt = <928000>; |
| regulator-max-microvolt = <928000>; |
| qcom,init-voltage = <928000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa5 { |
| status = "okay"; |
| L5A: pmd9650_l5: regulator-l5 { |
| regulator-name = "pmd9650_l5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa6 { |
| status = "okay"; |
| L6A: pmd9650_l6: regulator-l6 { |
| regulator-name = "pmd9650_l6"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa7 { |
| status = "okay"; |
| L7A: pmd9650_l7: regulator-l7 { |
| regulator-name = "pmd9650_l7"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2848000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa8 { |
| status = "okay"; |
| L8A: pmd9650_l8: regulator-l8 { |
| regulator-name = "pmd9650_l8"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <1000000>; |
| status = "okay"; |
| }; |
| }; |
| |
| /* PMD9650 L9 = VDD_MX supply */ |
| rpm-regulator-ldoa9 { |
| status = "okay"; |
| proxy-supply = <&VDD_MX_LEVEL>; |
| VDD_MX_LEVEL: |
| L9A_LEVEL: |
| pmd9650_l9_level: regulator-l9-level { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "pmd9650_l9_level"; |
| qcom,set = <3>; |
| regulator-min-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,init-voltage-level = |
| <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-voltage =<RPM_SMD_REGULATOR_LEVEL_TURBO |
| RPM_SMD_REGULATOR_LEVEL_TURBO_NO_CPR>; |
| qcom,use-voltage-level; |
| }; |
| }; |
| |
| rpm-regulator-ldoa10 { |
| status = "okay"; |
| L10A: pmd9650_l10: regulator-l10 { |
| regulator-name = "pmd9650_l10"; |
| regulator-min-microvolt = <3088000>; |
| regulator-max-microvolt = <3088000>; |
| qcom,init-voltage = <3088000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa11 { |
| status = "okay"; |
| L11A: pmd9650_l11: regulator-l11 { |
| regulator-name = "pmd9650_l11"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2848000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa12 { |
| status = "okay"; |
| L12A: pmd9650_l12: regulator-l12 { |
| regulator-name = "pmd9650_l12"; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2704000>; |
| qcom,init-voltage = <2704000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa13 { |
| status = "okay"; |
| L13A: pmd9650_l13: regulator-l13 { |
| regulator-name = "pmd9650_l13"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2848000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &soc { |
| codec_buck_vreg: codec_buck_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "codec_1.8v"; |
| regulator-always-on; |
| }; |
| |
| /* Rome 3.3V supply */ |
| rome_vreg: rome_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "rome_vreg"; |
| startup-delay-us = <4000>; |
| enable-active-high; |
| gpios = <&pmd9650_gpios 6 0>; |
| }; |
| |
| /* SD card 2.95 V supply */ |
| sdc_vreg: sdc_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "sdc_vreg"; |
| startup-delay-us = <4000>; |
| enable-active-high; |
| gpio = <&tlmm_pinmux 50 0>; |
| }; |
| }; |