include/asm-m32r/spinlock.h - kernel/msm - Gitiles

 #ifndef _ASM_M32R_SPINLOCK_H
 #define _ASM_M32R_SPINLOCK_H

 /*
  *  linux/include/asm-m32r/spinlock.h
  *
  *  M32R version:
  *    Copyright (C) 2001, 2002  Hitoshi Yamamoto
  *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
  */

 #include <linux/compiler.h>
 #include <asm/atomic.h>
 #include <asm/page.h>

 /*
  * Your basic SMP spinlocks, allowing only a single CPU anywhere
  *
  * (the type definitions are in asm/spinlock_types.h)
  *
  * Simple spin lock operations.  There are two variants, one clears IRQ's
  * on the local processor, one does not.
  *
  * We make no fairness assumptions. They have a cost.
  */

 #define __raw_spin_is_locked(x)		(*(volatile int *)(&(x)->slock) <= 0)
 #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
 #define __raw_spin_unlock_wait(x) \
 		do { cpu_relax(); } while (__raw_spin_is_locked(x))

 /**
  * __raw_spin_trylock - Try spin lock and return a result
  * @lock: Pointer to the lock variable
  *
  * __raw_spin_trylock() tries to get the lock and returns a result.
  * On the m32r, the result value is 1 (= Success) or 0 (= Failure).
  */
 static inline int __raw_spin_trylock(raw_spinlock_t *lock)
 {
 	int oldval;
 	unsigned long tmp1, tmp2;

 	/*
 	 * lock->slock :  =1 : unlock
 	 *             : <=0 : lock
 	 * {
 	 *   oldval = lock->slock; <--+ need atomic operation
 	 *   lock->slock = 0;      <--+
 	 * }
 	 */
 	__asm__ __volatile__ (
 		"# __raw_spin_trylock		\n\t"
 		"ldi	%1, #0;			\n\t"
 		"mvfc	%2, psw;		\n\t"
 		"clrpsw	#0x40 -> nop;		\n\t"
 		DCACHE_CLEAR("%0", "r6", "%3")
 		"lock	%0, @%3;		\n\t"
 		"unlock	%1, @%3;		\n\t"
 		"mvtc	%2, psw;		\n\t"
 		: "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
 		: "r" (&lock->slock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);

 	return (oldval > 0);
 }

 static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {
 	unsigned long tmp0, tmp1;

 	/*
 	 * lock->slock :  =1 : unlock
 	 *             : <=0 : lock
 	 *
 	 * for ( ; ; ) {
 	 *   lock->slock -= 1;  <-- need atomic operation
 	 *   if (lock->slock == 0) break;
 	 *   for ( ; lock->slock <= 0 ; );
 	 * }
 	 */
 	__asm__ __volatile__ (
 		"# __raw_spin_lock		\n\t"
 		".fillinsn			\n"
 		"1:				\n\t"
 		"mvfc	%1, psw;		\n\t"
 		"clrpsw	#0x40 -> nop;		\n\t"
 		DCACHE_CLEAR("%0", "r6", "%2")
 		"lock	%0, @%2;		\n\t"
 		"addi	%0, #-1;		\n\t"
 		"unlock	%0, @%2;		\n\t"
 		"mvtc	%1, psw;		\n\t"
 		"bltz	%0, 2f;			\n\t"
 		LOCK_SECTION_START(".balign 4 \n\t")
 		".fillinsn			\n"
 		"2:				\n\t"
 		"ld	%0, @%2;		\n\t"
 		"bgtz	%0, 1b;			\n\t"
 		"bra	2b;			\n\t"
 		LOCK_SECTION_END
 		: "=&r" (tmp0), "=&r" (tmp1)
 		: "r" (&lock->slock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);
 }

 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
 {
 	mb();
 	lock->slock = 1;
 }

 /*
  * Read-write spinlocks, allowing multiple readers
  * but only one writer.
  *
  * NOTE! it is quite common to have readers in interrupts
  * but no interrupt writers. For those circumstances we
  * can "mix" irq-safe locks - any writer needs to get a
  * irq-safe write-lock, but readers can get non-irqsafe
  * read-locks.
  *
  * On x86, we implement read-write locks as a 32-bit counter
  * with the high bit (sign) being the "contended" bit.
  *
  * The inline assembly is non-obvious. Think about it.
  *
  * Changed to use the same technique as rw semaphores.  See
  * semaphore.h for details.  -ben
  */

 /**
  * read_can_lock - would read_trylock() succeed?
  * @lock: the rwlock in question.
  */
 #define __raw_read_can_lock(x) ((int)(x)->lock > 0)

 /**
  * write_can_lock - would write_trylock() succeed?
  * @lock: the rwlock in question.
  */
 #define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)

 static inline void __raw_read_lock(raw_rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1;

 	/*
 	 * rw->lock :  >0 : unlock
 	 *          : <=0 : lock
 	 *
 	 * for ( ; ; ) {
 	 *   rw->lock -= 1;  <-- need atomic operation
 	 *   if (rw->lock >= 0) break;
 	 *   rw->lock += 1;  <-- need atomic operation
 	 *   for ( ; rw->lock <= 0 ; );
 	 * }
 	 */
 	__asm__ __volatile__ (
 		"# read_lock			\n\t"
 		".fillinsn			\n"
 		"1:				\n\t"
 		"mvfc	%1, psw;		\n\t"
 		"clrpsw	#0x40 -> nop;		\n\t"
 		DCACHE_CLEAR("%0", "r6", "%2")
 		"lock	%0, @%2;		\n\t"
 		"addi	%0, #-1;		\n\t"
 		"unlock	%0, @%2;		\n\t"
 		"mvtc	%1, psw;		\n\t"
 		"bltz	%0, 2f;			\n\t"
 		LOCK_SECTION_START(".balign 4 \n\t")
 		".fillinsn			\n"
 		"2:				\n\t"
 		"clrpsw	#0x40 -> nop;		\n\t"
 		DCACHE_CLEAR("%0", "r6", "%2")
 		"lock	%0, @%2;		\n\t"
 		"addi	%0, #1;			\n\t"
 		"unlock	%0, @%2;		\n\t"
 		"mvtc	%1, psw;		\n\t"
 		".fillinsn			\n"
 		"3:				\n\t"
 		"ld	%0, @%2;		\n\t"
 		"bgtz	%0, 1b;			\n\t"
 		"bra	3b;			\n\t"
 		LOCK_SECTION_END
 		: "=&r" (tmp0), "=&r" (tmp1)
 		: "r" (&rw->lock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);
 }

 static inline void __raw_write_lock(raw_rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1, tmp2;

 	/*
 	 * rw->lock :  =RW_LOCK_BIAS_STR : unlock
 	 *          : !=RW_LOCK_BIAS_STR : lock
 	 *
 	 * for ( ; ; ) {
 	 *   rw->lock -= RW_LOCK_BIAS_STR;  <-- need atomic operation
 	 *   if (rw->lock == 0) break;
 	 *   rw->lock += RW_LOCK_BIAS_STR;  <-- need atomic operation
 	 *   for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ;
 	 * }
 	 */
 	__asm__ __volatile__ (
 		"# write_lock					\n\t"
 		"seth	%1, #high(" RW_LOCK_BIAS_STR ");	\n\t"
 		"or3	%1, %1, #low(" RW_LOCK_BIAS_STR ");	\n\t"
 		".fillinsn					\n"
 		"1:						\n\t"
 		"mvfc	%2, psw;				\n\t"
 		"clrpsw	#0x40 -> nop;				\n\t"
 		DCACHE_CLEAR("%0", "r7", "%3")
 		"lock	%0, @%3;				\n\t"
 		"sub	%0, %1;					\n\t"
 		"unlock	%0, @%3;				\n\t"
 		"mvtc	%2, psw;				\n\t"
 		"bnez	%0, 2f;					\n\t"
 		LOCK_SECTION_START(".balign 4 \n\t")
 		".fillinsn					\n"
 		"2:						\n\t"
 		"clrpsw	#0x40 -> nop;				\n\t"
 		DCACHE_CLEAR("%0", "r7", "%3")
 		"lock	%0, @%3;				\n\t"
 		"add	%0, %1;					\n\t"
 		"unlock	%0, @%3;				\n\t"
 		"mvtc	%2, psw;				\n\t"
 		".fillinsn					\n"
 		"3:						\n\t"
 		"ld	%0, @%3;				\n\t"
 		"beq	%0, %1, 1b;				\n\t"
 		"bra	3b;					\n\t"
 		LOCK_SECTION_END
 		: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
 		: "r" (&rw->lock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r7"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);
 }

 static inline void __raw_read_unlock(raw_rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1;

 	__asm__ __volatile__ (
 		"# read_unlock			\n\t"
 		"mvfc	%1, psw;		\n\t"
 		"clrpsw	#0x40 -> nop;		\n\t"
 		DCACHE_CLEAR("%0", "r6", "%2")
 		"lock	%0, @%2;		\n\t"
 		"addi	%0, #1;			\n\t"
 		"unlock	%0, @%2;		\n\t"
 		"mvtc	%1, psw;		\n\t"
 		: "=&r" (tmp0), "=&r" (tmp1)
 		: "r" (&rw->lock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);
 }

 static inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1, tmp2;

 	__asm__ __volatile__ (
 		"# write_unlock					\n\t"
 		"seth	%1, #high(" RW_LOCK_BIAS_STR ");	\n\t"
 		"or3	%1, %1, #low(" RW_LOCK_BIAS_STR ");	\n\t"
 		"mvfc	%2, psw;				\n\t"
 		"clrpsw	#0x40 -> nop;				\n\t"
 		DCACHE_CLEAR("%0", "r7", "%3")
 		"lock	%0, @%3;				\n\t"
 		"add	%0, %1;					\n\t"
 		"unlock	%0, @%3;				\n\t"
 		"mvtc	%2, psw;				\n\t"
 		: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
 		: "r" (&rw->lock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r7"
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 	);
 }

 static inline int __raw_read_trylock(raw_rwlock_t *lock)
 {
 	atomic_t *count = (atomic_t*)lock;
 	if (atomic_dec_return(count) >= 0)
 		return 1;
 	atomic_inc(count);
 	return 0;
 }

 static inline int __raw_write_trylock(raw_rwlock_t *lock)
 {
 	atomic_t *count = (atomic_t *)lock;
 	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
 		return 1;
 	atomic_add(RW_LOCK_BIAS, count);
 	return 0;
 }

 #endif	/* _ASM_M32R_SPINLOCK_H */
	#ifndef _ASM_M32R_SPINLOCK_H
	#define _ASM_M32R_SPINLOCK_H

	/*
	* linux/include/asm-m32r/spinlock.h
	*
	* M32R version:
	* Copyright (C) 2001, 2002 Hitoshi Yamamoto
	* Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
	*/

	#include <linux/compiler.h>
	#include <asm/atomic.h>
	#include <asm/page.h>

	/*
	* Your basic SMP spinlocks, allowing only a single CPU anywhere
	*
	* (the type definitions are in asm/spinlock_types.h)
	*
	* Simple spin lock operations. There are two variants, one clears IRQ's
	* on the local processor, one does not.
	*
	* We make no fairness assumptions. They have a cost.
	*/

	#define __raw_spin_is_locked(x) ((volatile int )(&(x)->slock) <= 0)
	#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
	#define __raw_spin_unlock_wait(x) \
	do { cpu_relax(); } while (__raw_spin_is_locked(x))

	/**
	* __raw_spin_trylock - Try spin lock and return a result
	* @lock: Pointer to the lock variable
	*
	* __raw_spin_trylock() tries to get the lock and returns a result.
	* On the m32r, the result value is 1 (= Success) or 0 (= Failure).
	*/
	static inline int __raw_spin_trylock(raw_spinlock_t *lock)
	{
	int oldval;
	unsigned long tmp1, tmp2;

	/*
	* lock->slock : =1 : unlock
	* : <=0 : lock
	* {
	* oldval = lock->slock; <--+ need atomic operation
	* lock->slock = 0; <--+
	* }
	*/
	__asm__ __volatile__ (
	"# __raw_spin_trylock \n\t"
	"ldi %1, #0; \n\t"
	"mvfc %2, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r6", "%3")
	"lock %0, @%3; \n\t"
	"unlock %1, @%3; \n\t"
	"mvtc %2, psw; \n\t"
	: "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
	: "r" (&lock->slock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r6"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);

	return (oldval > 0);
	}

	static inline void __raw_spin_lock(raw_spinlock_t *lock)
	{
	unsigned long tmp0, tmp1;

	/*
	* lock->slock : =1 : unlock
	* : <=0 : lock
	*
	* for ( ; ; ) {
	* lock->slock -= 1; <-- need atomic operation
	* if (lock->slock == 0) break;
	* for ( ; lock->slock <= 0 ; );
	* }
	*/
	__asm__ __volatile__ (
	"# __raw_spin_lock \n\t"
	".fillinsn \n"
	"1: \n\t"
	"mvfc %1, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r6", "%2")
	"lock %0, @%2; \n\t"
	"addi %0, #-1; \n\t"
	"unlock %0, @%2; \n\t"
	"mvtc %1, psw; \n\t"
	"bltz %0, 2f; \n\t"
	LOCK_SECTION_START(".balign 4 \n\t")
	".fillinsn \n"
	"2: \n\t"
	"ld %0, @%2; \n\t"
	"bgtz %0, 1b; \n\t"
	"bra 2b; \n\t"
	LOCK_SECTION_END
	: "=&r" (tmp0), "=&r" (tmp1)
	: "r" (&lock->slock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r6"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);
	}

	static inline void __raw_spin_unlock(raw_spinlock_t *lock)
	{
	mb();
	lock->slock = 1;
	}

	/*
	* Read-write spinlocks, allowing multiple readers
	* but only one writer.
	*
	* NOTE! it is quite common to have readers in interrupts
	* but no interrupt writers. For those circumstances we
	* can "mix" irq-safe locks - any writer needs to get a
	* irq-safe write-lock, but readers can get non-irqsafe
	* read-locks.
	*
	* On x86, we implement read-write locks as a 32-bit counter
	* with the high bit (sign) being the "contended" bit.
	*
	* The inline assembly is non-obvious. Think about it.
	*
	* Changed to use the same technique as rw semaphores. See
	* semaphore.h for details. -ben
	*/

	/**
	* read_can_lock - would read_trylock() succeed?
	* @lock: the rwlock in question.
	*/
	#define __raw_read_can_lock(x) ((int)(x)->lock > 0)

	/**
	* write_can_lock - would write_trylock() succeed?
	* @lock: the rwlock in question.
	*/
	#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)

	static inline void __raw_read_lock(raw_rwlock_t *rw)
	{
	unsigned long tmp0, tmp1;

	/*
	* rw->lock : >0 : unlock
	* : <=0 : lock
	*
	* for ( ; ; ) {
	* rw->lock -= 1; <-- need atomic operation
	* if (rw->lock >= 0) break;
	* rw->lock += 1; <-- need atomic operation
	* for ( ; rw->lock <= 0 ; );
	* }
	*/
	__asm__ __volatile__ (
	"# read_lock \n\t"
	".fillinsn \n"
	"1: \n\t"
	"mvfc %1, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r6", "%2")
	"lock %0, @%2; \n\t"
	"addi %0, #-1; \n\t"
	"unlock %0, @%2; \n\t"
	"mvtc %1, psw; \n\t"
	"bltz %0, 2f; \n\t"
	LOCK_SECTION_START(".balign 4 \n\t")
	".fillinsn \n"
	"2: \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r6", "%2")
	"lock %0, @%2; \n\t"
	"addi %0, #1; \n\t"
	"unlock %0, @%2; \n\t"
	"mvtc %1, psw; \n\t"
	".fillinsn \n"
	"3: \n\t"
	"ld %0, @%2; \n\t"
	"bgtz %0, 1b; \n\t"
	"bra 3b; \n\t"
	LOCK_SECTION_END
	: "=&r" (tmp0), "=&r" (tmp1)
	: "r" (&rw->lock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r6"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);
	}

	static inline void __raw_write_lock(raw_rwlock_t *rw)
	{
	unsigned long tmp0, tmp1, tmp2;

	/*
	* rw->lock : =RW_LOCK_BIAS_STR : unlock
	* : !=RW_LOCK_BIAS_STR : lock
	*
	* for ( ; ; ) {
	* rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation
	* if (rw->lock == 0) break;
	* rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation
	* for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ;
	* }
	*/
	__asm__ __volatile__ (
	"# write_lock \n\t"
	"seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
	"or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
	".fillinsn \n"
	"1: \n\t"
	"mvfc %2, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r7", "%3")
	"lock %0, @%3; \n\t"
	"sub %0, %1; \n\t"
	"unlock %0, @%3; \n\t"
	"mvtc %2, psw; \n\t"
	"bnez %0, 2f; \n\t"
	LOCK_SECTION_START(".balign 4 \n\t")
	".fillinsn \n"
	"2: \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r7", "%3")
	"lock %0, @%3; \n\t"
	"add %0, %1; \n\t"
	"unlock %0, @%3; \n\t"
	"mvtc %2, psw; \n\t"
	".fillinsn \n"
	"3: \n\t"
	"ld %0, @%3; \n\t"
	"beq %0, %1, 1b; \n\t"
	"bra 3b; \n\t"
	LOCK_SECTION_END
	: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
	: "r" (&rw->lock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r7"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);
	}

	static inline void __raw_read_unlock(raw_rwlock_t *rw)
	{
	unsigned long tmp0, tmp1;

	__asm__ __volatile__ (
	"# read_unlock \n\t"
	"mvfc %1, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r6", "%2")
	"lock %0, @%2; \n\t"
	"addi %0, #1; \n\t"
	"unlock %0, @%2; \n\t"
	"mvtc %1, psw; \n\t"
	: "=&r" (tmp0), "=&r" (tmp1)
	: "r" (&rw->lock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r6"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);
	}

	static inline void __raw_write_unlock(raw_rwlock_t *rw)
	{
	unsigned long tmp0, tmp1, tmp2;

	__asm__ __volatile__ (
	"# write_unlock \n\t"
	"seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
	"or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
	"mvfc %2, psw; \n\t"
	"clrpsw #0x40 -> nop; \n\t"
	DCACHE_CLEAR("%0", "r7", "%3")
	"lock %0, @%3; \n\t"
	"add %0, %1; \n\t"
	"unlock %0, @%3; \n\t"
	"mvtc %2, psw; \n\t"
	: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
	: "r" (&rw->lock)
	: "memory"
	#ifdef CONFIG_CHIP_M32700_TS1
	, "r7"
	#endif /* CONFIG_CHIP_M32700_TS1 */
	);
	}

	static inline int __raw_read_trylock(raw_rwlock_t *lock)
	{
	atomic_t count = (atomic_t)lock;
	if (atomic_dec_return(count) >= 0)
	return 1;
	atomic_inc(count);
	return 0;
	}

	static inline int __raw_write_trylock(raw_rwlock_t *lock)
	{
	atomic_t count = (atomic_t )lock;
	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
	return 1;
	atomic_add(RW_LOCK_BIAS, count);
	return 0;
	}

	#endif /* _ASM_M32R_SPINLOCK_H */