| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * MSM PCIe controller driver. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/debugfs.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <asm/mach/pci.h> |
| #include <mach/gpiomux.h> |
| #include <mach/hardware.h> |
| #include <mach/msm_iomap.h> |
| |
| #include "pcie.h" |
| |
| /* Root Complex Port vendor/device IDs */ |
| #define PCIE_VENDOR_ID_RCP 0x17cb |
| #define PCIE_DEVICE_ID_RCP 0x0101 |
| |
| #define PCIE20_PARF_PCS_DEEMPH 0x34 |
| #define PCIE20_PARF_PCS_SWING 0x38 |
| #define PCIE20_PARF_PHY_CTRL 0x40 |
| #define PCIE20_PARF_PHY_REFCLK 0x4C |
| #define PCIE20_PARF_CONFIG_BITS 0x50 |
| |
| #define PCIE20_ELBI_VERSION 0x00 |
| #define PCIE20_ELBI_SYS_CTRL 0x04 |
| |
| #define PCIE20_CAP 0x70 |
| #define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) |
| |
| #define PCIE20_COMMAND_STATUS 0x04 |
| #define PCIE20_BUSNUMBERS 0x18 |
| #define PCIE20_MEMORY_BASE_LIMIT 0x20 |
| |
| #define PCIE20_PLR_AXI_MSTR_RESP_COMP_CTRL0 0x818 |
| #define PCIE20_PLR_AXI_MSTR_RESP_COMP_CTRL1 0x81c |
| #define PCIE20_PLR_IATU_VIEWPORT 0x900 |
| #define PCIE20_PLR_IATU_CTRL1 0x904 |
| #define PCIE20_PLR_IATU_CTRL2 0x908 |
| #define PCIE20_PLR_IATU_LBAR 0x90C |
| #define PCIE20_PLR_IATU_UBAR 0x910 |
| #define PCIE20_PLR_IATU_LAR 0x914 |
| #define PCIE20_PLR_IATU_LTAR 0x918 |
| #define PCIE20_PLR_IATU_UTAR 0x91c |
| |
| #define PCIE_RESET (MSM_CLK_CTL_BASE + 0x22dc) |
| #define PCIE_SFAB_AXI_S5_FCLK_CTL (MSM_CLK_CTL_BASE + 0x2154) |
| |
| #define MSM_PCIE_DEV_BAR_ADDR PCIBIOS_MIN_MEM |
| #define MSM_PCIE_DEV_CFG_ADDR 0x01000000 |
| |
| #define RD 0 |
| #define WR 1 |
| |
| /* PCIE AXI address space */ |
| #define PCIE_AXI_CONF_SIZE SZ_1M |
| |
| /* debug mask sys interface */ |
| static int msm_pcie_debug_mask; |
| module_param_named(debug_mask, msm_pcie_debug_mask, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| /* resources from device file */ |
| enum msm_pcie_res { |
| /* platform defined resources */ |
| MSM_PCIE_RES_PARF, |
| MSM_PCIE_RES_ELBI, |
| MSM_PCIE_RES_PCIE20, |
| MSM_PCIE_MAX_PLATFORM_RES, |
| |
| /* other resources */ |
| MSM_PCIE_RES_AXI_CONF = MSM_PCIE_MAX_PLATFORM_RES, |
| MSM_PCIE_MAX_RES, |
| }; |
| |
| /* msm pcie device data */ |
| static struct msm_pcie_dev_t msm_pcie_dev; |
| |
| /* regulators */ |
| static struct msm_pcie_vreg_info_t msm_pcie_vreg_info[MSM_PCIE_MAX_VREG] = { |
| {NULL, "vp_pcie", 1050000, 1050000, 40900}, |
| {NULL, "vptx_pcie", 1050000, 1050000, 18200}, |
| {NULL, "vdd_pcie_vph", 0, 0, 0}, |
| {NULL, "pcie_ext_3p3v", 0, 0, 0} |
| }; |
| |
| /* clocks */ |
| static struct msm_pcie_clk_info_t msm_pcie_clk_info[MSM_PCIE_MAX_CLK] = { |
| {NULL, "bus_clk"}, |
| {NULL, "iface_clk"}, |
| {NULL, "ref_clk"} |
| }; |
| |
| /* resources */ |
| static struct msm_pcie_res_info_t msm_pcie_res_info[MSM_PCIE_MAX_RES] = { |
| {"pcie_parf", 0, 0}, |
| {"pcie_elbi", 0, 0}, |
| {"pcie20", 0, 0}, |
| {"pcie_axi_conf", 0, 0}, |
| }; |
| |
| int msm_pcie_get_debug_mask(void) |
| { |
| return msm_pcie_debug_mask; |
| } |
| |
| static void msm_pcie_write_mask(void __iomem *addr, |
| uint32_t clear_mask, uint32_t set_mask) |
| { |
| uint32_t val; |
| |
| val = (readl_relaxed(addr) & ~clear_mask) | set_mask; |
| writel_relaxed(val, addr); |
| wmb(); /* ensure data is written to hardware register */ |
| } |
| |
| static int msm_pcie_is_link_up(void) |
| { |
| return readl_relaxed(msm_pcie_dev.pcie20 + PCIE20_CAP_LINKCTRLSTATUS) & |
| BIT(29); |
| } |
| |
| static inline int msm_pcie_oper_conf(struct pci_bus *bus, u32 devfn, int oper, |
| int where, int size, u32 *val) |
| { |
| uint32_t word_offset, byte_offset, mask; |
| uint32_t rd_val, wr_val; |
| struct msm_pcie_dev_t *dev = &msm_pcie_dev; |
| void __iomem *config_base; |
| |
| /* |
| * Only buses 0 and 1 are supported. RC port on bus 0 and EP in bus 1. |
| * For downstream bus (1), make sure link is up |
| */ |
| if ((bus->number > 1) || (devfn != 0)) { |
| PCIE_DBG("invalid %s - bus %d devfn %d\n", |
| (oper == RD) ? "rd" : "wr", bus->number, devfn); |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } else if ((bus->number != 0) && !msm_pcie_is_link_up()) { |
| PCIE_DBG("%s fail, link down - bus %d devfn %d\n", |
| (oper == RD) ? "rd" : "wr", bus->number, devfn); |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| word_offset = where & ~0x3; |
| byte_offset = where & 0x3; |
| mask = (~0 >> (8 * (4 - size))) << (8 * byte_offset); |
| |
| config_base = (bus->number == 0) ? dev->pcie20 : dev->axi_conf; |
| rd_val = readl_relaxed(config_base + word_offset); |
| |
| if (oper == RD) { |
| *val = ((rd_val & mask) >> (8 * byte_offset)); |
| |
| PCIE_DBG("%d:0x%02x + 0x%04x[%d] -> 0x%08x; rd 0x%08x\n", |
| bus->number, devfn, where, size, *val, rd_val); |
| } else { |
| wr_val = (rd_val & ~mask) | |
| ((*val << (8 * byte_offset)) & mask); |
| writel_relaxed(wr_val, config_base + word_offset); |
| wmb(); /* ensure config data is written to hardware register */ |
| |
| PCIE_DBG("%d:0x%02x + 0x%04x[%d] <- 0x%08x;" |
| " rd 0x%08x val 0x%08x\n", bus->number, |
| devfn, where, size, wr_val, rd_val, *val); |
| } |
| |
| return 0; |
| } |
| |
| static int msm_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, |
| int size, u32 *val) |
| { |
| return msm_pcie_oper_conf(bus, devfn, RD, where, size, val); |
| } |
| |
| static int msm_pcie_wr_conf(struct pci_bus *bus, u32 devfn, |
| int where, int size, u32 val) |
| { |
| /* |
| *Attempt to reset secondary bus is causing PCIE core to reset. |
| *Disable secondary bus reset functionality. |
| */ |
| if ((bus->number == 0) && (where == PCI_BRIDGE_CONTROL) && |
| (val & PCI_BRIDGE_CTL_BUS_RESET)) { |
| pr_info("PCIE secondary bus reset not supported\n"); |
| val &= ~PCI_BRIDGE_CTL_BUS_RESET; |
| } |
| |
| return msm_pcie_oper_conf(bus, devfn, WR, where, size, &val); |
| } |
| |
| static struct pci_ops msm_pcie_ops = { |
| .read = msm_pcie_rd_conf, |
| .write = msm_pcie_wr_conf, |
| }; |
| |
| static int __init msm_pcie_gpio_init(void) |
| { |
| int rc, i; |
| struct msm_pcie_gpio_info_t *info; |
| |
| for (i = 0; i < MSM_PCIE_MAX_GPIO; i++) { |
| info = &msm_pcie_dev.gpio[i]; |
| |
| rc = gpio_request(info->num, info->name); |
| if (rc) { |
| pr_err("can't get gpio %s; %d\n", info->name, rc); |
| break; |
| } |
| |
| rc = gpio_direction_output(info->num, 0); |
| if (rc) { |
| pr_err("can't set gpio direction %s; %d\n", |
| info->name, rc); |
| gpio_free(info->num); |
| break; |
| } |
| } |
| |
| if (rc) |
| while (i--) |
| gpio_free(msm_pcie_dev.gpio[i].num); |
| |
| return rc; |
| } |
| |
| static void msm_pcie_gpio_deinit(void) |
| { |
| int i; |
| |
| for (i = 0; i < MSM_PCIE_MAX_GPIO; i++) |
| gpio_free(msm_pcie_dev.gpio[i].num); |
| } |
| |
| static int __init msm_pcie_vreg_init(struct device *dev) |
| { |
| int i, rc = 0; |
| struct regulator *vreg; |
| struct msm_pcie_vreg_info_t *info; |
| |
| for (i = 0; i < msm_pcie_dev.vreg_n; i++) { |
| info = &msm_pcie_dev.vreg[i]; |
| |
| vreg = regulator_get(dev, info->name); |
| if (!vreg || IS_ERR(vreg)) { |
| rc = (PTR_ERR(vreg)) ? PTR_ERR(vreg) : -ENODEV; |
| pr_err("can't get %s; %d\n", info->name, rc); |
| break; |
| } |
| |
| if (info->max_v) { |
| rc = regulator_set_voltage(vreg, |
| info->min_v, info->max_v); |
| if (rc) { |
| pr_err("can't set voltage %s; %d\n", |
| info->name, rc); |
| regulator_put(vreg); |
| break; |
| } |
| } |
| |
| if (info->opt_mode) { |
| rc = regulator_set_optimum_mode(vreg, info->opt_mode); |
| if (rc < 0) { |
| pr_err("can't set mode %s; %d\n", |
| info->name, rc); |
| regulator_put(vreg); |
| break; |
| } |
| } |
| |
| rc = regulator_enable(vreg); |
| if (rc) { |
| pr_err("can't enable %s, %d\n", info->name, rc); |
| regulator_put(vreg); |
| break; |
| } |
| info->hdl = vreg; |
| } |
| |
| if (rc) |
| while (i--) { |
| regulator_disable(msm_pcie_dev.vreg[i].hdl); |
| regulator_put(msm_pcie_dev.vreg[i].hdl); |
| msm_pcie_dev.vreg[i].hdl = NULL; |
| } |
| |
| return rc; |
| } |
| |
| static void msm_pcie_vreg_deinit(void) |
| { |
| int i; |
| |
| for (i = 0; i < msm_pcie_dev.vreg_n; i++) { |
| regulator_disable(msm_pcie_dev.vreg[i].hdl); |
| regulator_put(msm_pcie_dev.vreg[i].hdl); |
| msm_pcie_dev.vreg[i].hdl = NULL; |
| } |
| } |
| |
| static int __init msm_pcie_clk_init(struct device *dev) |
| { |
| int i, rc = 0; |
| struct clk *clk_hdl; |
| struct msm_pcie_clk_info_t *info; |
| |
| for (i = 0; i < MSM_PCIE_MAX_CLK; i++) { |
| info = &msm_pcie_dev.clk[i]; |
| |
| clk_hdl = clk_get(dev, info->name); |
| if (!clk_hdl || IS_ERR(clk_hdl)) { |
| rc = (PTR_ERR(clk_hdl)) ? PTR_ERR(clk_hdl) : -ENODEV; |
| pr_err("can't get clk %s; %d\n", info->name, rc); |
| break; |
| } |
| clk_prepare_enable(clk_hdl); |
| info->hdl = clk_hdl; |
| } |
| |
| if (rc) |
| while (i--) { |
| clk_disable_unprepare(msm_pcie_dev.clk[i].hdl); |
| clk_put(msm_pcie_dev.clk[i].hdl); |
| msm_pcie_dev.clk[i].hdl = NULL; |
| } |
| |
| return rc; |
| } |
| |
| static void msm_pcie_clk_deinit(void) |
| { |
| int i; |
| |
| for (i = 0; i < MSM_PCIE_MAX_CLK; i++) { |
| clk_disable_unprepare(msm_pcie_dev.clk[i].hdl); |
| clk_put(msm_pcie_dev.clk[i].hdl); |
| msm_pcie_dev.clk[i].hdl = NULL; |
| } |
| } |
| |
| static void __init msm_pcie_config_controller(void) |
| { |
| struct msm_pcie_dev_t *dev = &msm_pcie_dev; |
| struct resource *axi_conf = dev->res[MSM_PCIE_RES_AXI_CONF].resource; |
| |
| /* |
| * program and enable address translation region 0 (device config |
| * address space); region type config; |
| * axi config address range to device config address range |
| */ |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_VIEWPORT); |
| /* ensure that hardware locks the region before programming it */ |
| wmb(); |
| |
| writel_relaxed(4, dev->pcie20 + PCIE20_PLR_IATU_CTRL1); |
| writel_relaxed(BIT(31), dev->pcie20 + PCIE20_PLR_IATU_CTRL2); |
| writel_relaxed(axi_conf->start, dev->pcie20 + PCIE20_PLR_IATU_LBAR); |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_UBAR); |
| writel_relaxed(axi_conf->end, dev->pcie20 + PCIE20_PLR_IATU_LAR); |
| writel_relaxed(MSM_PCIE_DEV_CFG_ADDR, |
| dev->pcie20 + PCIE20_PLR_IATU_LTAR); |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_UTAR); |
| /* ensure that hardware registers the configuration */ |
| wmb(); |
| |
| /* |
| * program and enable address translation region 2 (device resource |
| * address space); region type memory; |
| * axi device bar address range to device bar address range |
| */ |
| writel_relaxed(2, dev->pcie20 + PCIE20_PLR_IATU_VIEWPORT); |
| /* ensure that hardware locks the region before programming it */ |
| wmb(); |
| |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_CTRL1); |
| writel_relaxed(BIT(31), dev->pcie20 + PCIE20_PLR_IATU_CTRL2); |
| writel_relaxed(dev->axi_bar_start, dev->pcie20 + PCIE20_PLR_IATU_LBAR); |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_UBAR); |
| writel_relaxed(dev->axi_bar_end, dev->pcie20 + PCIE20_PLR_IATU_LAR); |
| writel_relaxed(MSM_PCIE_DEV_BAR_ADDR, |
| dev->pcie20 + PCIE20_PLR_IATU_LTAR); |
| writel_relaxed(0, dev->pcie20 + PCIE20_PLR_IATU_UTAR); |
| /* ensure that hardware registers the configuration */ |
| wmb(); |
| } |
| |
| static int __init msm_pcie_get_resources(struct platform_device *pdev) |
| { |
| int i, rc = 0; |
| struct resource *res; |
| struct msm_pcie_res_info_t *info; |
| struct msm_pcie_dev_t *dev = &msm_pcie_dev; |
| |
| for (i = 0; i < MSM_PCIE_MAX_RES; i++) { |
| info = &dev->res[i]; |
| |
| if (i < MSM_PCIE_MAX_PLATFORM_RES) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| info->name); |
| } else { |
| res = dev->res[i].resource; |
| if (request_resource(&iomem_resource, res)) |
| res = NULL; |
| } |
| |
| if (!res) { |
| pr_err("can't get %s resource\n", info->name); |
| rc = -ENOMEM; |
| break; |
| } |
| |
| info->base = ioremap(res->start, resource_size(res)); |
| if (!info->base) { |
| pr_err("can't remap %s\n", info->name); |
| rc = -ENOMEM; |
| break; |
| } |
| |
| info->resource = res; |
| } |
| |
| if (rc) { |
| while (i--) { |
| iounmap(dev->res[i].base); |
| dev->res[i].base = NULL; |
| if (i >= MSM_PCIE_MAX_PLATFORM_RES) |
| release_resource(dev->res[i].resource); |
| } |
| } else { |
| dev->parf = dev->res[MSM_PCIE_RES_PARF].base; |
| dev->elbi = dev->res[MSM_PCIE_RES_ELBI].base; |
| dev->pcie20 = dev->res[MSM_PCIE_RES_PCIE20].base; |
| dev->axi_conf = dev->res[MSM_PCIE_RES_AXI_CONF].base; |
| } |
| |
| return rc; |
| } |
| |
| static void msm_pcie_release_resources(void) |
| { |
| int i; |
| |
| for (i = 0; i < MSM_PCIE_MAX_RES; i++) { |
| iounmap(msm_pcie_dev.res[i].base); |
| msm_pcie_dev.res[i].base = NULL; |
| if (i >= MSM_PCIE_MAX_PLATFORM_RES) |
| release_resource(msm_pcie_dev.res[i].resource); |
| } |
| |
| msm_pcie_dev.parf = NULL; |
| msm_pcie_dev.elbi = NULL; |
| msm_pcie_dev.pcie20 = NULL; |
| msm_pcie_dev.axi_conf = NULL; |
| } |
| |
| static void msm_pcie_adjust_tlp_size(struct msm_pcie_dev_t *dev) |
| { |
| /* |
| * Set the Max TLP size to 2K, instead of using default of 4K |
| * to avoid a RAM problem in PCIE20 core of that version. |
| */ |
| |
| /* |
| * CFG_REMOTE_RD_REQ_BRIDGE_SIZE: |
| * 5=4KB/4=2KB/3=1KB/2=512B/1=256B/0=128B |
| */ |
| writel_relaxed(4, dev->pcie20 + |
| PCIE20_PLR_AXI_MSTR_RESP_COMP_CTRL0); |
| |
| writel_relaxed(1, dev->pcie20 + |
| PCIE20_PLR_AXI_MSTR_RESP_COMP_CTRL1); |
| }; |
| |
| static int __init msm_pcie_setup(int nr, struct pci_sys_data *sys) |
| { |
| int rc; |
| struct msm_pcie_dev_t *dev = &msm_pcie_dev; |
| uint32_t val; |
| |
| PCIE_DBG("bus %d\n", nr); |
| if (nr != 0) |
| return 0; |
| |
| /* |
| * specify linux PCI framework to allocate device memory (BARs) |
| * from msm_pcie_dev.dev_mem_res resource. |
| */ |
| sys->mem_offset = 0; |
| pci_add_resource(&sys->resources, &msm_pcie_dev.dev_mem_res); |
| |
| /* assert PCIe reset link to keep EP in reset */ |
| gpio_set_value_cansleep(dev->gpio[MSM_PCIE_GPIO_RST_N].num, |
| dev->gpio[MSM_PCIE_GPIO_RST_N].on); |
| |
| /* enable power */ |
| rc = msm_pcie_vreg_init(&dev->pdev->dev); |
| if (rc) |
| goto out; |
| |
| /* assert PCIe PARF reset while powering the core */ |
| msm_pcie_write_mask(PCIE_RESET, 0, BIT(2)); |
| |
| /* enable clocks */ |
| rc = msm_pcie_clk_init(&dev->pdev->dev); |
| if (rc) |
| goto clk_fail; |
| |
| /* enable pcie power; wait 3ms for clock to stabilize */ |
| gpio_set_value_cansleep(dev->gpio[MSM_PCIE_GPIO_PWR_EN].num, |
| dev->gpio[MSM_PCIE_GPIO_PWR_EN].on); |
| usleep(3000); |
| |
| /* |
| * de-assert PCIe PARF reset; |
| * wait 1us before accessing PARF registers |
| */ |
| msm_pcie_write_mask(PCIE_RESET, BIT(2), 0); |
| udelay(1); |
| |
| /* enable PCIe clocks and resets */ |
| msm_pcie_write_mask(dev->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); |
| |
| /* PARF programming */ |
| writel_relaxed(dev->parf_deemph, dev->parf + PCIE20_PARF_PCS_DEEMPH); |
| writel_relaxed(dev->parf_swing, dev->parf + PCIE20_PARF_PCS_SWING); |
| writel_relaxed((4<<24), dev->parf + PCIE20_PARF_CONFIG_BITS); |
| /* ensure that hardware registers the PARF configuration */ |
| wmb(); |
| |
| /* enable reference clock */ |
| msm_pcie_write_mask(dev->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16)); |
| |
| /* enable access to PCIe slave port on system fabric */ |
| writel_relaxed(BIT(4), PCIE_SFAB_AXI_S5_FCLK_CTL); |
| /* ensure that access is enabled before proceeding */ |
| wmb(); |
| |
| /* de-assert PICe PHY, Core, POR and AXI clk domain resets */ |
| msm_pcie_write_mask(PCIE_RESET, BIT(5), 0); |
| msm_pcie_write_mask(PCIE_RESET, BIT(4), 0); |
| msm_pcie_write_mask(PCIE_RESET, BIT(3), 0); |
| msm_pcie_write_mask(PCIE_RESET, BIT(0), 0); |
| |
| /* wait 150ms for clock acquisition */ |
| udelay(150); |
| |
| /* de-assert PCIe reset link to bring EP out of reset */ |
| gpio_set_value_cansleep(dev->gpio[MSM_PCIE_GPIO_RST_N].num, |
| !dev->gpio[MSM_PCIE_GPIO_RST_N].on); |
| |
| /* |
| * adjust tlp size before link comes up |
| * so there will be no transactions. |
| */ |
| msm_pcie_adjust_tlp_size(dev); |
| |
| /* enable link training */ |
| msm_pcie_write_mask(dev->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0)); |
| |
| /* poll for link to come up for upto 100ms */ |
| rc = readl_poll_timeout( |
| (msm_pcie_dev.pcie20 + PCIE20_CAP_LINKCTRLSTATUS), |
| val, (val & BIT(29)), 10000, 100000); |
| if (rc) { |
| pr_err("link initialization failed\n"); |
| goto link_fail; |
| } else |
| pr_info("link initialized\n"); |
| |
| msm_pcie_config_controller(); |
| rc = msm_pcie_irq_init(dev); |
| if (!rc) |
| goto out; |
| |
| link_fail: |
| msm_pcie_clk_deinit(); |
| clk_fail: |
| msm_pcie_vreg_deinit(); |
| out: |
| return (rc) ? 0 : 1; |
| } |
| |
| static struct pci_bus __init *msm_pcie_scan_bus(int nr, |
| struct pci_sys_data *sys) |
| { |
| struct pci_bus *bus = NULL; |
| |
| PCIE_DBG("bus %d\n", nr); |
| if (nr == 0) |
| bus = pci_scan_root_bus(NULL, sys->busnr, &msm_pcie_ops, sys, |
| &sys->resources); |
| |
| return bus; |
| } |
| |
| static int __init msm_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| PCIE_DBG("slot %d pin %d\n", slot, pin); |
| return (pin <= 4) ? (PCIE20_INTA + pin - 1) : 0; |
| } |
| |
| static struct hw_pci msm_pci __initdata = { |
| .nr_controllers = 1, |
| .swizzle = pci_std_swizzle, |
| .setup = msm_pcie_setup, |
| .scan = msm_pcie_scan_bus, |
| .map_irq = msm_pcie_map_irq, |
| }; |
| |
| static int __init msm_pcie_probe(struct platform_device *pdev) |
| { |
| const struct msm_pcie_platform *pdata; |
| struct resource *res; |
| int rc; |
| |
| PCIE_DBG("\n"); |
| |
| msm_pcie_dev.pdev = pdev; |
| pdata = pdev->dev.platform_data; |
| msm_pcie_dev.gpio = pdata->gpio; |
| msm_pcie_dev.wake_n = pdata->wake_n; |
| msm_pcie_dev.vreg_n = pdata->vreg_n; |
| msm_pcie_dev.parf_deemph = pdata->parf_deemph; |
| msm_pcie_dev.parf_swing = pdata->parf_swing; |
| msm_pcie_dev.vreg = msm_pcie_vreg_info; |
| msm_pcie_dev.clk = msm_pcie_clk_info; |
| msm_pcie_dev.res = msm_pcie_res_info; |
| |
| /* device memory resource */ |
| res = &msm_pcie_dev.dev_mem_res; |
| res->name = "pcie_dev_mem"; |
| res->start = MSM_PCIE_DEV_BAR_ADDR; |
| res->end = res->start + pdata->axi_size - 1; |
| res->flags = IORESOURCE_MEM; |
| |
| /* axi address space = axi bar space + axi config space */ |
| msm_pcie_dev.axi_bar_start = pdata->axi_addr; |
| msm_pcie_dev.axi_bar_end = pdata->axi_addr + pdata->axi_size - |
| PCIE_AXI_CONF_SIZE - 1; |
| |
| /* axi config space resource */ |
| res = kzalloc(sizeof(*res), GFP_KERNEL); |
| if (!res) { |
| pr_err("can't allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| msm_pcie_dev.res[MSM_PCIE_RES_AXI_CONF].resource = res; |
| res->name = msm_pcie_dev.res[MSM_PCIE_RES_AXI_CONF].name; |
| res->start = msm_pcie_dev.axi_bar_end + 1; |
| res->end = res->start + PCIE_AXI_CONF_SIZE - 1; |
| res->flags = IORESOURCE_MEM; |
| |
| rc = msm_pcie_get_resources(msm_pcie_dev.pdev); |
| if (rc) |
| return rc; |
| |
| rc = msm_pcie_gpio_init(); |
| if (rc) { |
| msm_pcie_release_resources(); |
| return rc; |
| } |
| |
| /* kick start ARM PCI configuration framework */ |
| pci_common_init(&msm_pci); |
| return 0; |
| } |
| |
| static int __exit msm_pcie_remove(struct platform_device *pdev) |
| { |
| PCIE_DBG("\n"); |
| |
| msm_pcie_irq_deinit(&msm_pcie_dev); |
| msm_pcie_vreg_deinit(); |
| msm_pcie_clk_deinit(); |
| msm_pcie_gpio_deinit(); |
| msm_pcie_release_resources(); |
| |
| msm_pcie_dev.pdev = NULL; |
| msm_pcie_dev.vreg = NULL; |
| msm_pcie_dev.clk = NULL; |
| msm_pcie_dev.gpio = NULL; |
| return 0; |
| } |
| |
| static struct platform_driver msm_pcie_driver = { |
| .remove = __exit_p(msm_pcie_remove), |
| .driver = { |
| .name = "msm_pcie", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init msm_pcie_init(void) |
| { |
| PCIE_DBG("\n"); |
| pcibios_min_mem = 0x10000000; |
| return platform_driver_probe(&msm_pcie_driver, msm_pcie_probe); |
| } |
| subsys_initcall(msm_pcie_init); |
| |
| /* RC do not represent the right class; set it to PCI_CLASS_BRIDGE_PCI */ |
| static void __devinit msm_pcie_fixup_early(struct pci_dev *dev) |
| { |
| PCIE_DBG("hdr_type %d\n", dev->hdr_type); |
| if (dev->hdr_type == 1) |
| dev->class = (dev->class & 0xff) | (PCI_CLASS_BRIDGE_PCI << 8); |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, |
| msm_pcie_fixup_early); |
| |
| /* enable wake_n interrupt during suspend */ |
| static void msm_pcie_fixup_suspend(struct pci_dev *dev) |
| { |
| PCIE_DBG("enabling wake_n\n"); |
| if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) |
| enable_irq(msm_pcie_dev.wake_n); |
| } |
| DECLARE_PCI_FIXUP_SUSPEND(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, |
| msm_pcie_fixup_suspend); |
| |
| /* disable wake_n interrupt when system is not in suspend */ |
| static void msm_pcie_fixup_resume(struct pci_dev *dev) |
| { |
| PCIE_DBG("disabling wake_n\n"); |
| if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) |
| disable_irq(msm_pcie_dev.wake_n); |
| } |
| DECLARE_PCI_FIXUP_RESUME(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, |
| msm_pcie_fixup_resume); |
| |
| /* |
| * actual physical (BAR) address of the device resources starts from |
| * MSM_PCIE_DEV_BAR_ADDR; the system axi address for the device resources starts |
| * from msm_pcie_dev.axi_bar_start; correct the device resource structure here; |
| * address translation unit handles the required translations |
| */ |
| static void __devinit msm_pcie_fixup_final(struct pci_dev *dev) |
| { |
| int i; |
| struct resource *res; |
| |
| PCIE_DBG("vendor 0x%x 0x%x\n", dev->vendor, dev->device); |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| res = &dev->resource[i]; |
| if (res->start & MSM_PCIE_DEV_BAR_ADDR) { |
| res->start -= MSM_PCIE_DEV_BAR_ADDR; |
| res->start += msm_pcie_dev.axi_bar_start; |
| res->end -= MSM_PCIE_DEV_BAR_ADDR; |
| res->end += msm_pcie_dev.axi_bar_start; |
| |
| /* If Root Port, request for the changed resource */ |
| if ((dev->vendor == PCIE_VENDOR_ID_RCP) && |
| (dev->device == PCIE_DEVICE_ID_RCP)) { |
| insert_resource(&iomem_resource, res); |
| } |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, msm_pcie_fixup_final); |