drivers/ide/pci/tc86c001.c - kernel/msm - Gitiles

 /*
  * Copyright (C) 2002 Toshiba Corporation
  * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */

 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/ide.h>

 static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
 	u16 mode, scr		= inw(scr_port);

 	switch (speed) {
 		case XFER_UDMA_4:	mode = 0x00c0; break;
 		case XFER_UDMA_3:	mode = 0x00b0; break;
 		case XFER_UDMA_2:	mode = 0x00a0; break;
 		case XFER_UDMA_1:	mode = 0x0090; break;
 		case XFER_UDMA_0:	mode = 0x0080; break;
 		case XFER_MW_DMA_2:	mode = 0x0070; break;
 		case XFER_MW_DMA_1:	mode = 0x0060; break;
 		case XFER_MW_DMA_0:	mode = 0x0050; break;
 		case XFER_PIO_4:	mode = 0x0400; break;
 		case XFER_PIO_3:	mode = 0x0300; break;
 		case XFER_PIO_2:	mode = 0x0200; break;
 		case XFER_PIO_1:	mode = 0x0100; break;
 		case XFER_PIO_0:
 		default:		mode = 0x0000; break;
 	}

 	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
 	scr |= mode;
 	outw(scr, scr_port);
 }

 static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	tc86c001_set_mode(drive, XFER_PIO_0 + pio);
 }

 /*
  * HACKITY HACK
  *
  * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
  * if a DMA transfer terminates prematurely, the controller leaves the device's
  * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
  * set the interrupt bit in the DMA status register), thus no PCI interrupt
  * will occur until a DMA transfer has been successfully completed.
  *
  * We work around this by initiating dummy, zero-length DMA transfer on
  * a DMA timeout expiration. I found no better way to do this with the current
  * IDE core than to temporarily replace a higher level driver's timer expiry
  * handler with our own backing up to that handler in case our recovery fails.
  */
 static int tc86c001_timer_expiry(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
 	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
 	u8 dma_stat		= inb(hwif->dma_status);

 	/* Restore a higher level driver's expiry handler first. */
 	hwgroup->expiry	= expiry;

 	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
 		unsigned long sc_base	= hwif->config_data;
 		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
 		u8 dma_cmd		= inb(hwif->dma_command);

 		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
 		       "attempting recovery...\n", drive->name);

 		/* Stop DMA */
 		outb(dma_cmd & ~0x01, hwif->dma_command);

 		/* Setup the dummy DMA transfer */
 		outw(0, sc_base + 0x0a);	/* Sector Count */
 		outw(0, twcr_port);	/* Transfer Word Count 1 or 2 */

 		/* Start the dummy DMA transfer */
 		outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
 		outb(0x01, hwif->dma_command); /* set START_STOPBM */

 		/*
 		 * If an interrupt was pending, it should come thru shortly.
 		 * If not, a higher level driver's expiry handler should
 		 * eventually cause some kind of recovery from the DMA stall.
 		 */
 		return WAIT_MIN_SLEEP;
 	}

 	/* Chain to the restored expiry handler if DMA wasn't active. */
 	if (likely(expiry != NULL))
 		return expiry(drive);

 	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
 	return -1;
 }

 static void tc86c001_dma_start(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
 	unsigned long sc_base	= hwif->config_data;
 	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
 	unsigned long nsectors	= hwgroup->rq->nr_sectors;

 	/*
 	 * We have to manually load the sector count and size into
 	 * the appropriate system control registers for DMA to work
 	 * with LBA48 and ATAPI devices...
 	 */
 	outw(nsectors, sc_base + 0x0a);	/* Sector Count */
 	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */

 	/* Install our timeout expiry hook, saving the current handler... */
 	ide_set_hwifdata(hwif, hwgroup->expiry);
 	hwgroup->expiry = &tc86c001_timer_expiry;

 	ide_dma_start(drive);
 }

 static int tc86c001_busproc(ide_drive_t *drive, int state)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	unsigned long sc_base	= hwif->config_data;
 	u16 scr1;

 	/* System Control 1 Register bit 11 (ATA Hard Reset) read */
 	scr1 = inw(sc_base + 0x00);

 	switch (state) {
 		case BUSSTATE_ON:
 			if (!(scr1 & 0x0800))
 				return 0;
 			scr1 &= ~0x0800;

 			hwif->drives[0].failures = hwif->drives[1].failures = 0;
 			break;
 		case BUSSTATE_OFF:
 			if (scr1 & 0x0800)
 				return 0;
 			scr1 |= 0x0800;

 			hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
 			hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
 			break;
 		default:
 			return -EINVAL;
 	}

 	/* System Control 1 Register bit 11 (ATA Hard Reset) write */
 	outw(scr1, sc_base + 0x00);
 	return 0;
 }

 static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long sc_base = pci_resource_start(dev, 5);
 	u16 scr1 = inw(sc_base + 0x00);

 	/*
 	 * System Control  1 Register bit 13 (PDIAGN):
 	 * 0=80-pin cable, 1=40-pin cable
 	 */
 	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 }

 static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long sc_base	= pci_resource_start(dev, 5);
 	u16 scr1		= inw(sc_base + 0x00);

 	/* System Control 1 Register bit 15 (Soft Reset) set */
 	outw(scr1 |  0x8000, sc_base + 0x00);

 	/* System Control 1 Register bit 14 (FIFO Reset) set */
 	outw(scr1 |  0x4000, sc_base + 0x00);

 	/* System Control 1 Register: reset clear */
 	outw(scr1 & ~0xc000, sc_base + 0x00);

 	/* Store the system control register base for convenience... */
 	hwif->config_data = sc_base;

 	hwif->set_pio_mode = &tc86c001_set_pio_mode;
 	hwif->set_dma_mode = &tc86c001_set_mode;

 	hwif->busproc	= &tc86c001_busproc;

 	hwif->cable_detect = tc86c001_cable_detect;

 	if (!hwif->dma_base)
 		return;

 	/*
 	 * Sector Count Control Register bits 0 and 1 set:
 	 * software sets Sector Count Register for master and slave device
 	 */
 	outw(0x0003, sc_base + 0x0c);

 	/* Sector Count Register limit */
 	hwif->rqsize	 = 0xffff;

 	hwif->dma_start 	= &tc86c001_dma_start;
 }

 static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
 							const char *name)
 {
 	int err = pci_request_region(dev, 5, name);

 	if (err)
 		printk(KERN_ERR "%s: system control regs already in use", name);
 	return err;
 }

 static const struct ide_port_info tc86c001_chipset __devinitdata = {
 	.name		= "TC86C001",
 	.init_chipset	= init_chipset_tc86c001,
 	.init_hwif	= init_hwif_tc86c001,
 	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
 			  IDE_HFLAG_ABUSE_SET_DMA_MODE,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,
 };

 static int __devinit tc86c001_init_one(struct pci_dev *dev,
 				       const struct pci_device_id *id)
 {
 	return ide_setup_pci_device(dev, &tc86c001_chipset);
 }

 static const struct pci_device_id tc86c001_pci_tbl[] = {
 	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);

 static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
 	.probe		= tc86c001_init_one
 };

 static int __init tc86c001_ide_init(void)
 {
 	return ide_pci_register_driver(&driver);
 }
 module_init(tc86c001_ide_init);

 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
 MODULE_LICENSE("GPL");
	/*
	* Copyright (C) 2002 Toshiba Corporation
	* Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
	*
	* This file is licensed under the terms of the GNU General Public
	* License version 2. This program is licensed "as is" without any
	* warranty of any kind, whether express or implied.
	*/

	#include <linux/types.h>
	#include <linux/pci.h>
	#include <linux/ide.h>

	static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
	{
	ide_hwif_t *hwif = HWIF(drive);
	unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
	u16 mode, scr = inw(scr_port);

	switch (speed) {
	case XFER_UDMA_4: mode = 0x00c0; break;
	case XFER_UDMA_3: mode = 0x00b0; break;
	case XFER_UDMA_2: mode = 0x00a0; break;
	case XFER_UDMA_1: mode = 0x0090; break;
	case XFER_UDMA_0: mode = 0x0080; break;
	case XFER_MW_DMA_2: mode = 0x0070; break;
	case XFER_MW_DMA_1: mode = 0x0060; break;
	case XFER_MW_DMA_0: mode = 0x0050; break;
	case XFER_PIO_4: mode = 0x0400; break;
	case XFER_PIO_3: mode = 0x0300; break;
	case XFER_PIO_2: mode = 0x0200; break;
	case XFER_PIO_1: mode = 0x0100; break;
	case XFER_PIO_0:
	default: mode = 0x0000; break;
	}

	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
	scr \|= mode;
	outw(scr, scr_port);
	}

	static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
	{
	tc86c001_set_mode(drive, XFER_PIO_0 + pio);
	}

	/*
	* HACKITY HACK
	*
	* This is a workaround for the limitation 5 of the TC86C001 IDE controller:
	* if a DMA transfer terminates prematurely, the controller leaves the device's
	* interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
	* set the interrupt bit in the DMA status register), thus no PCI interrupt
	* will occur until a DMA transfer has been successfully completed.
	*
	* We work around this by initiating dummy, zero-length DMA transfer on
	* a DMA timeout expiration. I found no better way to do this with the current
	* IDE core than to temporarily replace a higher level driver's timer expiry
	* handler with our own backing up to that handler in case our recovery fails.
	*/
	static int tc86c001_timer_expiry(ide_drive_t *drive)
	{
	ide_hwif_t *hwif = HWIF(drive);
	ide_expiry_t *expiry = ide_get_hwifdata(hwif);
	ide_hwgroup_t *hwgroup = HWGROUP(drive);
	u8 dma_stat = inb(hwif->dma_status);

	/* Restore a higher level driver's expiry handler first. */
	hwgroup->expiry = expiry;

	if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
	unsigned long sc_base = hwif->config_data;
	unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
	u8 dma_cmd = inb(hwif->dma_command);

	printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
	"attempting recovery...\n", drive->name);

	/* Stop DMA */
	outb(dma_cmd & ~0x01, hwif->dma_command);

	/* Setup the dummy DMA transfer */
	outw(0, sc_base + 0x0a); /* Sector Count */
	outw(0, twcr_port); /* Transfer Word Count 1 or 2 */

	/* Start the dummy DMA transfer */
	outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
	outb(0x01, hwif->dma_command); /* set START_STOPBM */

	/*
	* If an interrupt was pending, it should come thru shortly.
	* If not, a higher level driver's expiry handler should
	* eventually cause some kind of recovery from the DMA stall.
	*/
	return WAIT_MIN_SLEEP;
	}

	/* Chain to the restored expiry handler if DMA wasn't active. */
	if (likely(expiry != NULL))
	return expiry(drive);

	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
	return -1;
	}

	static void tc86c001_dma_start(ide_drive_t *drive)
	{
	ide_hwif_t *hwif = HWIF(drive);
	ide_hwgroup_t *hwgroup = HWGROUP(drive);
	unsigned long sc_base = hwif->config_data;
	unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
	unsigned long nsectors = hwgroup->rq->nr_sectors;

	/*
	* We have to manually load the sector count and size into
	* the appropriate system control registers for DMA to work
	* with LBA48 and ATAPI devices...
	*/
	outw(nsectors, sc_base + 0x0a); /* Sector Count */
	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */

	/* Install our timeout expiry hook, saving the current handler... */
	ide_set_hwifdata(hwif, hwgroup->expiry);
	hwgroup->expiry = &tc86c001_timer_expiry;

	ide_dma_start(drive);
	}

	static int tc86c001_busproc(ide_drive_t *drive, int state)
	{
	ide_hwif_t *hwif = HWIF(drive);
	unsigned long sc_base = hwif->config_data;
	u16 scr1;

	/* System Control 1 Register bit 11 (ATA Hard Reset) read */
	scr1 = inw(sc_base + 0x00);

	switch (state) {
	case BUSSTATE_ON:
	if (!(scr1 & 0x0800))
	return 0;
	scr1 &= ~0x0800;

	hwif->drives[0].failures = hwif->drives[1].failures = 0;
	break;
	case BUSSTATE_OFF:
	if (scr1 & 0x0800)
	return 0;
	scr1 \|= 0x0800;

	hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
	hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
	break;
	default:
	return -EINVAL;
	}

	/* System Control 1 Register bit 11 (ATA Hard Reset) write */
	outw(scr1, sc_base + 0x00);
	return 0;
	}

	static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
	{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	unsigned long sc_base = pci_resource_start(dev, 5);
	u16 scr1 = inw(sc_base + 0x00);

	/*
	* System Control 1 Register bit 13 (PDIAGN):
	* 0=80-pin cable, 1=40-pin cable
	*/
	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
	}

	static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
	{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	unsigned long sc_base = pci_resource_start(dev, 5);
	u16 scr1 = inw(sc_base + 0x00);

	/* System Control 1 Register bit 15 (Soft Reset) set */
	outw(scr1 \| 0x8000, sc_base + 0x00);

	/* System Control 1 Register bit 14 (FIFO Reset) set */
	outw(scr1 \| 0x4000, sc_base + 0x00);

	/* System Control 1 Register: reset clear */
	outw(scr1 & ~0xc000, sc_base + 0x00);

	/* Store the system control register base for convenience... */
	hwif->config_data = sc_base;

	hwif->set_pio_mode = &tc86c001_set_pio_mode;
	hwif->set_dma_mode = &tc86c001_set_mode;

	hwif->busproc = &tc86c001_busproc;

	hwif->cable_detect = tc86c001_cable_detect;

	if (!hwif->dma_base)
	return;

	/*
	* Sector Count Control Register bits 0 and 1 set:
	* software sets Sector Count Register for master and slave device
	*/
	outw(0x0003, sc_base + 0x0c);

	/* Sector Count Register limit */
	hwif->rqsize = 0xffff;

	hwif->dma_start = &tc86c001_dma_start;
	}

	static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
	const char *name)
	{
	int err = pci_request_region(dev, 5, name);

	if (err)
	printk(KERN_ERR "%s: system control regs already in use", name);
	return err;
	}

	static const struct ide_port_info tc86c001_chipset __devinitdata = {
	.name = "TC86C001",
	.init_chipset = init_chipset_tc86c001,
	.init_hwif = init_hwif_tc86c001,
	.host_flags = IDE_HFLAG_SINGLE \| IDE_HFLAG_OFF_BOARD \|
	IDE_HFLAG_ABUSE_SET_DMA_MODE,
	.pio_mask = ATA_PIO4,
	.mwdma_mask = ATA_MWDMA2,
	.udma_mask = ATA_UDMA4,
	};

	static int __devinit tc86c001_init_one(struct pci_dev *dev,
	const struct pci_device_id *id)
	{
	return ide_setup_pci_device(dev, &tc86c001_chipset);
	}

	static const struct pci_device_id tc86c001_pci_tbl[] = {
	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
	{ 0, }
	};
	MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);

	static struct pci_driver driver = {
	.name = "TC86C001",
	.id_table = tc86c001_pci_tbl,
	.probe = tc86c001_init_one
	};

	static int __init tc86c001_ide_init(void)
	{
	return ide_pci_register_driver(&driver);
	}
	module_init(tc86c001_ide_init);

	MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
	MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
	MODULE_LICENSE("GPL");